INDBOND 3000 Dry Strength Resin for Paper INDBOND 3000 Dry Strength Resins are specially formulated polymers designed for better paper making and to improve strength characteristics like burst factor, double fold, breaking length and stiffness in craft, writing, printing and board paper. These chemicals are very much suitable for short fibre pulp like straw, bagasse, hard wood, waste paper etc. and are used for long fibre, soft and hard wood. INDBOND 3000 Dry Strength Resins are effective over a wide range of ph encountered in papermaking and also withstand shear conditions. No agitator or pump is required for solution making. Product Data INDBOND 3000 Appearance Ionic Character Viscosity cps @ 25 o C ph of 5.0 % Solution Water Soluble Liquid Polymer Amphoteric 3000 5000 5.5-7.5 Improved strength characteristics like burst factor, tear factor, breaking length and double fold. Improved paper formation. Improved stiffness in paper. Higher levels of talcum loading. Higher levels of short fibre pulp. Ready to use liquid Easy to prepare solution and use Direction For Use INDBOND 3000 may be added neat or by diluting to a concentration of 100 to 200 gpl using filtered water, either into the refiner or into the machine chest. INDBOND polymers can be prepared easily just by mere mixing. No us of agitator or sophisticated dosing equipment is required. Our product engineer will recommend you the best- suited concentration and the point of addition for your requirement.
41 Dry Strength Resin for paper & board making INDFLOC Dry Strength Resins are specially formulated polymeric chemicals designed for BETTER paper making and to improve strength characteristics like burst factor, tear factor, double fold, breaking length and stiffness of craft, writing, printing and board paper. These chemicals are very much suitable for shore fibre pulp like straw, bagasee, hard wood, waste paper etc. and can be used as supplement for long fibres. INDFLOC Dry Strength Resins are effective over a wide range of ph encountered in papermaking and also withstand shear conditions. No agitator or pump is required for solution making. Product Data INDFLOC 41 Appearance (cationic) Product viscosity cps @ 25 o C Water soluble liquid polymer High 1500-3000 cps Improved strength characteristics like burst factor, tear factor, breaking length & double fold Improved paper formation Improved stiffness / rattling of paper Higher levels of talcum loading Higher levels of shore fiber pulp Ready to use liquid Direction For Use INDFLOC polymers may be added at source or by diluting to a concentration of 100 to 200 gpl using filtered water, either into the refined or to the machine chest. INDFLOC polymers can be prepared easily just by mere mixing. No use of agitator or sophisticated dosing equipment is required. Our Ion Exchange (India) Ltd., Product Engineer will recommend you the best-suited concentration and the point of addition for your requirement.
27 High efficiency poly electrolytes for solid-liquid separation INDFLOC 27 is high efficiency polyelectrolyte, specially designed for solid liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludges for the recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery of liquor or disposal. INDFLOC 27 application is Sedimentation and clarification of Neutral leach in Zinc and Uranium. Metal Hydroxides Filtration of base metal sulphides, oxides and hydroxide concentrate. Product Data INDFLOC 27 Appearance Free flowing Powder Medium Anionic ph of 0.1 % Solution 7.0 8.5 Stock Solution Viscosity (cps) of 0.1 % solu 50 125 Direction For Use INDFLOC 27 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50 0 C to accelerate the dissolution. Higher temperatures are not recommended INDFLOC 27 dosage for clarification is normally between 10 to 40 ppm depending on suspended solids. Rapid Settling Marked increase in underflow density High filtration rate Increase throughput Improved filter clarity Efficient filter cake washing
49C Speciality Polymer for use in paper industry INDFLOC 49C is a speciality chemical designed for use in or paper machines to reduce or avoid tackiness and fluff problems. INDFLOC 49C acts as binding agent, thereby binding the unbound fibres, trashes and other foreign materials on to the fibres and eliminates the depositing of the trash / fluff on to the surface of presses rolls/cylinders/dryers. Product Data Appearance (cationic) INDFLOC 49C Water soluble liquid polymer High ph 2-5 Viscosity ( cps) 1000 2500 Dilutable with water in any proportion Can be added to the stock chest directly or with dilution. Stability to : Salts (sulfates, chlorides, phosphates & nitrates) : Good Acids : Good Alkalis : Good up to ph 9.0 Water hardness : Good Reduces tackiness and pickup on MG cylinder & dryers. Considerable reduction in fluff. Reduces electrostatic charges No effect on either strength / optical properties Improves drainage on wire. Improves smoothness of paper. Direction For Use INDFLOC 49C can easily be dissolved in water as per required concentration added at raw chest before addition of any chemicals to a furnish having trashes. INDFLOC 49C can also be sprayed on to the side of the sheet that comes in contact with the presses / dryers / MG cylinder. The dosage of INDFLOC 49C depends upon the extent of problem and pulp quality in use. product exhibit very low order of oral toxicity.
140 PG 2 Polymer for Retention and Drainage INDFLOC 140 PG 2 is high efficiency poly electrolyte, specially designed for retention and drainage in the paper making process. The application includes retaining the fines fillers and other paper making furnish components. In broad spectrum for all liquid separation applications INDFLOC 140 PG 2 is an excellent Polymer. This is very effective on broad ph range. INDFLOC-140 PG 2 is very effective in controlling the hydrodynamics of the stock at forming zone. Product Data Appearance Free Flowing Powder (Anionic) ph of 0.1 % Solution Bulk Viscosity of 0.1 % Solution (cps) Very Low 4.0 6.0 30-90 Rapid dissolution Improves the run ability of machine High drainage rate Highly efficient Improved white water clarity Excellent in retaining ash Direction for Use INDFLOC 140 PG 2 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (0.5 to 1.0 % w/v) of the poly electrolyte using process/filtered water. Prepare feed solution by diluting the stock solution directly or by on-line using water. Chemicals can be dosed by dosing equipment. Dosing system is recommended by Ion Exchange (India) Limited based on the requirement of the clients. The area where the polymer is prepared should be kept dry and clean always as the polymer spillage might cause a slippery surface.
140 PG 4 Polymer for Retention and Drainage INDFLOC 140 PG 4 is high efficiency poly electrolyte, specially designed for Retention and Drainage in the Paper Making process. The application includes retaining the fines fillers and other paper making furnish components. In broad spectrum for all liquid separation applications INDFLOC-140 PG 4 is an excellent Polymer. This is very effective on broad ph range. INDFLOC-140 PG 4 is very effective in controlling the hydrodynamics of the stock at forming zone. Product Data Appearance Free Flowing Powder Low (Cationic) ph of 0.1 % Solution 3.0 5.0 Bulk Viscosity of 0.1 40-100 % Solution ( cps) Rapid Dissolution Improves the run ability of machine High Drainage rate Highly efficient Improved white water clarity Excellent in retaining Ash Direction for Use INDFLOC 140 PG 4 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (0.5 to 1.0 % w/v) of the poly electrolyte using process/filtered water. Prepare feed solution by diluting the stock solution directly or by on-line using water. Chemicals can be dosed by dosing equipment. Dosing system is recommended by Ion Exchange (India) Limited based on the requirement of the clients. The area where the polymer is prepared should be kept dry and clean always as the polymer spillage might cause a slippery surface.
238LT Coagulants for Water Treatment INDFLOC 238LT is liquid coagulant based on polyamines used in water clarification. They may be used independently or supplemented with inorganic coagulants or with Flocculants based on polyacrylamide. INDFLOC 238LT is efficient in removal of colloidal silica from boiler feed made-up for high-pressure boilers. These coagulants can be used for efficient removal of organics oil and suspended solids from potable and process water. Product Data Appearance INDFLOC 238LT Pale Yellow to Colorless Liquid Cationic ph 2 to 5 Viscosity (cps) 2,000 10,000 Good floc formation Rapid settling Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Increased throughputs Ready to use liquid Rapid settling Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Increased throughputs Direction for Use INDFLOC 238 LT Polymers may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock - solution (1.0 to 1.5%w/v) of the polyelectrolytes using clear filtered water. Prepare feed solution by diluting the stock solution about ten times directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended for optimum efficiency. Ion Exchange India Ltd., will recommend the dosing equipment best suited for your requirement. No special care is required in handling this product.
239LT Coagulants for Water Treatment INDFLOC 239LT is liquid coagulant based on polyamines used in water clarification. They may be used independently or supplemented with inorganic coagulants or with flocculants based on polyacrylamide. INDFLOC 239LT is efficient in removal of colloidal silica from boiler feed made-up for high-pressure boilers. These coagulants can be used for efficient removal of organics oil and suspended solids from potable and process water. Product Data Appearance INDFLOC 239LT Pale Yellow to Colorless Liquid Cationic ph 3 to 6 Viscosity (cps) 2,000 6,000 Good floc formation Rapid settling Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Increased throughputs Ready to use liquid Rapid settling Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Increased throughputs Direction for Use INDFLOC 239 LT Polymers may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock - solution (1.0 to 1.5%w/v) of the polyelectrolytes using clear filtered water. Prepare feed solution by diluting the stock solution about ten times directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended for optimum efficiency. Ion Exchange (India) Ltd., will recommend the dosing equipment best suited for your requirement. No special care is required in handling this product.
417 Polyelectrolytes for solid - liquid separation & dewatering INDFLOC 417 is high efficiency polyelectrolyte, specially designed for solid - liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludge for the recovery of liquor or disposal of solids by filtration and centrifugation sludge for the recovery of liquor or disposal of solids by filtration Belt Press and centrifugation. Product Data INDFLOC 417 Appearance Ionic Character (Cationic) Crystalline white Low ph of 0.1 % Solution 2 5.5 Bulk Viscosity of 0.1% Solution ( Cps) 5-25 Rapid settling Marked increase in underflow density High filtration rate Increased throughput Improved filter clarity Efficient filter cake washing Direction for Use INDFLOC 417 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (1.0 to 1.5%w/v) of the polyelectrolyte using filtered water. Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small systems chemicals can be dosed by gravity or by dosing equipment. However, for larger systems use of dosing system is recommended. Ion Exchange Limited will recommend the dosing equipment best suited for your requirement.
424 Polyelectrolytes for solid - liquid separation & dewatering INDFLOC 424 is high efficiency polyelectrolyte, specially designed for solid - liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludge for the recovery of liquor or disposal of solids by filtration and centrifugation sludge for the recovery of liquor or disposal of solids by filtration Belt Press and centrifugation. Product Data INDFLOC 424 Appearance Crystalline white (Cationic) ph of 0.1 % Solution Bulk Viscosity of 0.1% Solution ( Cps) Medium 3 4.5 30 80 Rapid settling Marked increase in underflow density High filtration rate Increased throughput Improved filter clarity Efficient filter cake washing Direction for Use INDFLOC 424 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (1.0 to 1.5%w/v) of the polyelectrolyte using filtered water. Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small systems chemicals can be dosed by gravity or by dosing equipment. However, for larger systems use of dosing system is recommended. Ion Exchange Limited will recommend the dosing equipment best suited for your requirement.
429 Polyelectrolytes for solid - liquid separation & dewatering INDFLOC 429 is high efficiency polyelectrolyte, specially designed for solid - liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludge for the recovery of liquor or disposal of solids by filtration and centrifugation sludge for the recovery of liquor or disposal of solids by filtration Belt Press and centrifugation. Product Data INDFLOC 429 Appearance (Cationic) ph of 0.1 % Solution Bulk Viscosity of 0.1% Solution (Cps) Crystalline white Medium 2-4 30 90 Rapid settling Marked increase in underflow density High filtration rate Increased throughput Improved filter clarity Efficient filter cake washing Direction for Use INDFLOC 429 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (1.0 to 1.5%w/v) of the polyelectrolyte using filtered water. Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small systems chemicals can be dosed by gravity or by dosing equipment. However, for larger systems use of dosing system is recommended. Ion Exchange Limited will recommend the dosing equipment best suited for your requirement.
441 High efficiency poly electrolytes for solid-liquid separation INDFLOC 441 is high efficiency polyelectrolyte, specially designed for solid liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludges for the recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery of liquor or disposal. INDFLOC 441 application is Sedimentation and clarification of Neutral leach in Zinc and Uranium. Metal Hydroxides Filtration of base metal sulphides, oxides and hydroxide concentrate. Product Data INDFLOC 441 Appearance Ionic Character Free flowing Powder Medium Anionic ph of 0.1 % Solution 6.0 8.0 Stock Solution Viscosity (cps) of 0.1 % solu 5 30 Rapid Settling Marked increase in underflow density High filtration rate Increase throughput Improved filter clarity Efficient filter cake washing Direction For Use INDFLOC 441 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50 0 C to accelerate the dissolution. Higher temperatures are not recommended INDFLOC 441 dosage for clarification is normally between 10 to 40 ppm depending on suspended solids.
442 High efficiency poly electrolytes for solid-liquid separation INDFLOC 442 is high efficiency polyelectrolyte, specially designed for solid liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludges for the recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery of liquor or disposal. INDFLOC 442 application is Sedimentation and clarification of Neutral leach in Zinc and Uranium. Metal Hydroxides Filtration of base metal sulphides, oxides and hydroxide concentrate. Product Data INDFLOC 442 Appearance ph of 0.1 % Solution Stock Solution Viscosity (cps) of 0.1 % solu Free flowing Powder Low Anionic 7.0 8. 5 150 250 Direction for use INDFLOC 442 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50 0 C to accelerate the dissolution. Higher temperatures are not recommended INDFLOC 442 dosage for clarification is normally between 10 to 40 ppm depending on suspended solids. Rapid Settling Marked increase in underflow density High filtration rate Increase throughput Improved filter clarity Efficient filter cake washing
443 High efficiency poly electrolytes for solid-liquid separation INDFLOC 443 is high efficiency polyelectrolyte, specially designed for solid liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludges for the recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery of liquor or disposal. INDFLOC 443 application is Sedimentation and clarification of Neutral leach in Zinc and Uranium. Metal Hydroxides Filtration of base metal sulphides, oxides and hydroxide concentrate. Product Data INDFLOC 443 Appearance Ionic Character Free flowing Powder Medium Anionic ph of 0.1 % Solution 7.0 9.0 Stock Solution Viscosity (cps) of 0.1 % solu 120 300 Rapid Settling Marked increase in underflow density High filtration rate Increase throughput Improved filter clarity Efficient filter cake washing Direction For Use INDFLOC 443 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50 0 C to accelerate the dissolution. Higher temperatures are not recommended INDFLOC 443 dosage for clarification is normally between 10 to 40 ppm depending on suspended solids.
445 High efficiency poly electrolytes for solid-liquid separation INDFLOC 445 is high efficiency polyelectrolyte, specially designed for solid liquid separation process. s include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; Dewatering of pulp and sludges for the recovery of liquor or disposal of solids by filtration and Product Data INDFLOC 445 Appearance Ionic Character Free flowing Powder Non Ionic ph of 0.1 % Solution 5.5 8.0 Stock Solution Viscosity (cps) of 0.1 % solu 25 85 Rapid Settling Marked increase in underflow density High filtration rate Increase throughput Improved filter clarity Efficient filter cake washing centrifugation sludges for the recovery of liquor or disposal. INDFLOC 445 application is Sedimentation and clarification of Neutral leach in Zinc and Uranium. Metal Hydroxides Filtration of base metal sulphides, oxides and hydroxide concentrate. at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50 0 C to accelerate the dissolution. Higher temperatures are not recommended INDFLOC 445 dosage for clarification is normally between 10 to 40 ppm depending on suspended solids. Direction For Use INDFLOC 445 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating
905 Polymer for Retention and Drainage INDFLOC 905 is high efficiency poly electrolyte, specially designed for Retention and Drainage in the Paper Making process. The application includes retaining the fines fillers and other paper making furnish components. In broad spectrum for all liquid separation applications INDFLOC-905 is an excellent Polymer. This is very effective on broad ph range. INDFLOC- 905 is very effective in controlling the hydrodynamics of the stock at forming zone. Product Data Appearance (Anionic) Free Flowing Powder Low ph of 0.1 % Solution 6.0 7.5 Bulk Viscosity of 0.1 % Solution ( cps) 30-80 Rapid Dissolution Improves the run ability of machine High Drainage rate Highly efficient Improved white water clarity Excellent in retaining Ash Direction for Use INDFLOC 905 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (0.5 to 1.0 % w/v) of the poly electrolyte using process/filtered water. Prepare feed solution by diluting the stock solution directly or by on-line using water. Chemicals can be dosed by dosing equipment. Dosing system is recommended by Ion Exchange (India) Limited based on the requirement of the clients. The area where the polymer is prepared should be kept dry and clean always as the polymer spillage might cause a slippery surface.
2800 Dry Strength Resin for paper INDFLOC 2800 Dry Strength Resins are specially formulated polymers designed for better paper making and to improve strength characteristics like burst factor, double fold, breaking length and stiffness in Kraft, writing, printing and board paper. These chemicals are very much suitable for short fibre pulp like straw, bagasse, hard Product Data INDFLOC 2800 Appearance Viscosity cps @ 25 o C ph of 5.0 % Solution Water Soluble Liquid Polymer Amphoteric 6500 10000 5-6.5 Improved strength characteristics like burst factor, tear factor, breaking length and double fold. Improved paper formation. Improved stiffness in paper. Higher levels of talcum loading. Higher levels of short fibre pulp. wood, waste paper etc. and are used for long fibre, soft and hard wood. INDFLOC 2800 Dry Strength Resins are effective over a wide range of ph encountered in papermaking and also withstand shear conditions. No agitator or pump is required for solution making. Direction For Use INDFLOC 2800 may be added neat or by diluting to a concentration of 100 to 200 gpl using filtered water, either into the refiner or into the machine chest. INDFLOC polymers can be prepared easily just by mere mixing. No us of agitator or sophisticated dosing equipment is required. Our product engineer will recommend you the best- suited concentration and the point of addition for your requirement. Ready to use liquid Easy to prepare solution and use
ROCA 19 Chemical for reduction of SDI INDION ROCA 19 is liquid chemical used for reducing the SDI of raw water fed to Reverse Osmasis plants. This chemical formulation may be used independently. INDION ROCA-19 is efficient in removal of colloidal particles from water. These chemical formulations can be used for efficient removal of organics oil and suspended solids from potable and RO feed water. This formulation works as a flocculant and reduces SDI. Laboratory evaluation revealed no adverse effect on the membrane of R O plants. INDION ROCA 19 has to dosed online be dosed at the inlet or outlet of water feed pump. Product Data Appearance Ionic Character INDION ROCA-19 Pale Yellow Liquid Slightly Cationic Viscosity@ 25 o C 4000 18000 ph 2-5 Reduction of SDI Good floc formation Rapid action Improved output of RO Improved clarity in filtrate Increased Membrane life Ready to use liquid FDI approved chemical formulation Efficient removal of colloidal silica Sizable reduction in organics Improved clarity in filtrate Soluble to any concentration Direction for Use INDION ROCA 19 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock -solution (1.0 to 1.5%w/v) using clear filtered water. Prepare feed solution by diluting the stock solution about ten times directly or by on-line using filtered water. In all the cases the chemical is to dosed through a dosing pump and SDI to be checked at the out let of cartridge filter. The effect of chemical is evident only at cartridge filter considering the floc size. No special care is required in handling this product.
INDSURF 1855 For de-inking of waste paper Introduction INDSURF 1855 is a proprietary formulation designed for effective ink dispersion from furnishes predominantly consisting of difficult inks. INDSURF 1855 restricts the re adsorption of dispersed ink effectively hence less specs count resulting in improved Brightness of the paper. Product Data Appearance: Yellow to colorless liquid ph: 7.5 9.5 Brightness gain Less fiber loss High Yield Productivity INDSURF 1855 is highly effective on furnishes containing news and pams, coated book stock, mixed waste, etc. INDSURF 1855 is suitably applied to furnish as received (Without Any Dilution). It is beneficial to operate the de inking system at suitable total hardness level INDSURF 1855 does not interfere with any other polymers, Chemicals that are used along in the system. Ion Exchange (India) Ltd. s technical officer will be pleased to offer right application technology to suit your mill. Typical Dosages INDSURF 1855 is effective in the ph range of 8-12 at consistencies from 5 to 18%. The dosage of the chemical is 0.1 to 0.4% depending on the furnish and the end use. Avoid keeping the containers under direct sunlight. Keep the containers tightly closed after use.
INDSURF 810 For de-inking of waste paper Introduction INDSURF 810 is a proprietary formulation designed for effective ink dispersion from furnishes predominantly consisting of difficult inks. INDSURF 810 restricts the re adsorption of dispersed ink effectively hence less specs count resulting in improved brightness of the paper Product Data Appearance: White to colorless pellets ph of 5%: 8 11 Brightness gain Less fiber loss High Yield Productivity INDSURF 810 is highly effective on furnishes containing News and Pams, Coated Book Stock, Mixed Waste, etc. INDSURF 810 is suitably applied to furnish as received (Without Any Dilution). It is beneficial to operate the de inking system at suitable total hardness level INDSURF 810 does not interfere with any other polymers, Chemicals that are used along in the system. Ion Exchange (India) Ltd s Technical Officer will be pleased to offer right application technology to suit your mill. Typical Dosages INDSURF 810 is effective in the ph range of 8-12 at consistencies from 5 to 18%. The dosage of the chemical is 0.1 to 0.4% depending on the furnish and the end use. Avoid keeping the containers under direct sunlight. Keep the containers tightly closed after use.