RBC China Well-known Trade Mark Products Manual
Index 1. RBC poly(st-dvb) based gel- and macroporous-type strong acidic cation exchange resins 2. RBC polyacrylate based gel- and macroporous-type weak acidic cation exchange resins 3. RBC poly(st-dvb) based gel- and macroporous-type strong base anion exchange resins 4. RBC poly(st-dvb) based macroporous-type weak base anion exchange resins 5. RBC polyacrylate based gel- and macroporous-type strong base and weak base anion exchange resins 6. RBC epoxy and Phenolic based ion exchange resins 7. RBC nuclear grade cation and anion exchange resins 8. RBC condensate polishing and system start-up ion exchange resins 9. RBC oil removal resins 10. RBC ready to use mixed-bed resins 11. RBC catalyst resins 12. RBC selective and chelating ion exchange resins 13. RBC adsorbent resins 14. RBC resins used as media of chromatographic separations 15. RBC powered anion & cation exchange resins and powered fibers 16. RBC food grade ion exchange and adsorbent resins 17. RBC color changing ion exchange resins with indicators 18. RBC MBS mixed bed resins specific for treatment of generator internal cooling water 19. RBC inert resins and gas tower fillers 20. Explanations on particle sizes and the distributions and other special requirements 21. RBC closest competitive equivalents
1. RBC Poly (St-DVB) Based Gel and Macroporous-Type Strong Acidic Cation Exchange Resins RBC Ionic form Mass capacity meq/g Volume capacity meq/ml Moisture % Bulk density g/ml Specific density g/ml Particle size % Effective diameter mm Uniformity coefficient Whole beads after (attrition) osmotic attrition % Color Remarks 001 4 Na 4.5 1.40 52~58 0.75~0.80 1.18~1.25 Mainly used in water softening, demineralization 001 4H H 5.0 1.25 58~65 0.72~0.78 1.10~1.20 0.315~1.25mm 0.4~0.7 and antibiotic extraction 001 7 Na 4.5 1.90 45~50 0.77~0.87 1.25~1.29 Domestic gel type standard. Suitable for softening 1.6 and demineralization. Also be widely used in 001 7H H 5.0 1.80 51~56 0.73~0.83 1.17~1.22 glutamate and other amino acids recovery and antibiotics extraction, etc. 001 7FC Na 4.5 1.90 45~50 0.77~0.87 1.25~1.29 0.45~1.25mm 0.5 For floating bed with high flow rate 001 7MB Na 4.5 1.90 45~50 0.77~0.87 1.25~1.29 0.5~1.25mm 001 8 Na 4.5 2.0 43~48 0.78~0.88 1.26~1.30 0.315~1.25mm 001 8FC Na 4.5 2.0 43~48 0.78~0.88 1.26~1.30 0.45~1.25mm 001 8MB Na 4.5 2.0 43~48 0.78~0.88 1.26~1.30 0.5~1.25mm 0.55~0.9 1.4 With good mixture and separation properties with 0.4~0.7 ( 90) 0.5 Light yellow to brown anion resins in mixed bed. 1.6 60 International gel type standard. Suitable for water softening and demineralization. Used also in amino 0.55~0.9 1.4 acids and antibiotics. 001 10 Na 4.4 2.2 38~43 0.80~0.88 1.28~1.32 0.315~1.25mm 001 10H H 4.9 2.0 43~59 0.78~0.83 1.22~1.28 0.4~0.7 1.6 For water treatment and Biochemical extraction. 001 16 Na 4.0 2.4 28~36 0.83~0.89 1.30~1.35 Mainly used in antibiotic extraction 002SC Na Na 4.4 2.1 38~43 0.81~0.87 1.30 0.63~1.25mm 002SC H H 4.9 1.9 46~51 0.78~0.84 1.24 95 0.63 1.4 Strong cation resin, combined with D113SC, specific for bi-layered bed system.
SQ-60C Na 4.5 2.0 43~48 0.78~0.88 1.26~1.30 0.7~0.9mm 1.2 ( 90) 60 Gel type strong cation resin with uniform particle sizes. Used in soft or DI water production, having good dynamic properties and low pressure drop. Could be used alone or combined with SQ-70A. SQ-66 Na 2.5~4.0 1.5 35~45 0.78~0.88 1.15~1.25 Partially sulphonated resin for softening. Significant saving in salt usage. SQ-68 Na 4.35 1.9 45~50 0.78~0.88 1.25~1.29 0.315~1.25mm 0.4~0.7 1.6 Non-solvent cation resin. Very low contamination. Especially suitable for drinking water treatment. SQ-607 H 5.0 1.75 51-56 0.70-0.80 1.17-1.22 ( 90) Mainly used for amino acid recovery, with high capacity and easy to elute. D001 Na 4.35 1.8 45~55 0.77~0.85 1.25~1.28 0.315~1.25mm Very high resistance to oxidation, physical D001H H 4.80 1.7 50~60 0.74~0.80 1.16~1.24 breakage, osmotic shock fracture and organic D001FC Na 4.35 1.8 45~50 0.77~0.85 1.25~1.28 0.45~1.25mm 0.5 1.6 fouling. Suitable for water and chemical treatment. D001MB Na 4.35 1.8 45~50 0.77~0.85 1.25~1.28 0.5~1.25mm 1.4 90 D001SC Na 4.35 1.8 45~50 0.77~0.85 1.25~1.28 0.63~1.25mm 0.63 Specific for bi-layered bed with D113SC. D001 TR Na 4.35 1.8 45-50 0.77-0.85 1.25-1.28 0.71-1.25 Specific for tri-layered bed with D201-TR and SQD-61 H 4.8 1.70 50~60 0.72~0.82 1.15~1.25 0.4~1.25mm 0.4~0.7 1.6 90 SQD-65 H 4.8 2.0 45~55 0.75~0.85 1.18~1.26 0.315~1.25mm ( 90) SQD-67 H 4.5 2.2 40~45 0.75~0.85 1.30~1.40 90 Light grey to light brown S-TR. With superior mechanical strength and excellent resistance to organic fouling, SQD-61, combined with SQD-92, is used in the recycling water treatment in glycol and methyl ethyl ketone production. Very high capacity. Mainly used to convert Vc-Na into VC. SQD-67 has higher capacity than SQD-65.
16. Explanations on particle sizes and the distributions and other special requirements: (1) General sized resins (for fixed bed systems) Size range: (0.315-1.25mm) 95%, ( 0.315mm) 1%; effective size: 0.40~0.60mm; uniformity coefficient: 1.60 (2) FC resins (for floating bed systems) Size range: (0.45-1.25mm) 95%, ( 0.45mm) 1%; effective size: 0.50mm; uniformity coefficient: 1.60 (3) SC resins (for bi-layered bed systems) Weak cation and weak anion resins: size range (0.355-0.63mm) 95%, (>0.63mm) 1%; effective size: 0.35~0.50mm; uniformity coefficient 1.40 Strong cation and strong anion resins: size range (0.63-1.25mm) 95%, (<0.63mm) 1%; effective size 0.63mm; uniformity coefficient 1.40 (4) MB resins (for mixed bed systems) Strong cation resins: size range (0.5-1.25mm) 95%, (<0.5mm) 1%; effective size 0.55-0.90mm; uniformity coefficient 1.40 Strong anion resins: size range (0.40-0.90mm) 95%, (>0.90mm) 1%, (<0.315mm) 1%; effective size 0.4-0.8mm; uniformity coefficient 1.40 When strong cation and strong anion resins are used as mixed bed resins, the difference of the effective sizes of the resins should be 0.1mm. (5) Ion exchange and adsorbent resins with uniform particle sizes All RBC ion exchange and adsorbent resins could be supplied in uniform particle sizes with uniformity coefficient 1.2. (6) The particle sizes and uniformity coefficient of all RBC s products could be customer-made according to customer s requirements.
17. RBC Closest Competitive Equivalents RBC Bayer Mitsubishi Diaion Dow Dowex Purolite ResinTech Rohm&Haas Sybron Amberlite Duolite Cation Exchange Resins 001 4 001 4H 001 7 S100LF HCR-S(E)S C100E SR1L 001 7H C100H 001 8 S100 SK1B HCR-S(E) C100 CG-8 IR-120 C-20 C-249 001 10 S110 SK110 HGR-W2/C10 C100X10 CG-10 IR-122 C-20X10 C-250 001 16 SK116 IR-124 SQ-66 SST-60 SQ-68 C-249NS D001 S112 PK216 MSC-1 C150 SAC MP Amb 252 C-26S CFP-110 SQD-65 SP120 PK228 CM15/16 C160 C-360 SQD-67 C160 112 C105 IRC-86 D113-Ⅲ CNP-80 WK-40 MWC-1 C104E WAC MP IRC-76/84 HP333 CCP SQD-85 CNP/LF WK-20 MAC-3 C107E SQD-88 WT01S C115E IRC-50 SQ-122 Anion Exchange Resins 201 2 201 4 M504/510 SA 12A SBR-P A400 SBG 1P IRA402/420 A-113 ASB-1P 201 7 M500/511 SA 10A SBR A600 SBG 1 IRA400 A-109 ASB-1 202-II M600/610 SA 20A SAR A200/300 SBG 2 IRA410 A102/104 ASB-2 D201 MP500 PA308/312 MSA-1 A500 SBMP 1 IRA900 A-161 A641 D202-II MP600 PA412/416 MSA-2 A510 IRA910 A-162 A651 D296 MP500A SBG-1VP IRA901/904 A642
DOC2001 S6328A HPA25 A500P SIR-22P IRA958 D208 1X1 D301-III 66 A100 IRA94 A-329S D301-G MP64 WA 30 MWA-1 A100E WBMP IRA93/95/96 D301-H A103S IRA92 D301-M MP62 D308 D309 D320 213 VP OC1071 A850E SBACR1 IRA458 A475 D213 VP OC1074 A860 IRA958 MACRO-T 313 VP OC1072 WA 11 A845/847 IRA67 D318 AP49 A830 IRA68 A375 SQD-96 WA21 SQD-816 SQ-338 Condensate Polishing Resins D003NJ 650C SGC-650H D203NJ 550A SGC-550OH Oil Removal Resins OA-01 OL-100 Catalyst Resins 002CR K1221 CT110 A131 D002 K2641/2649 CT124/175 A15/35 D002-II XE365 Selective and Chelating Resins D401 TP207/208 CR 11 XZ95843 S930 SIR-300 IRC-748 SR-5 D402 TP260 XZ87480 S940 SIR-500 IRC-747 C467 D403-II MK51 CRB 02 XUS43594.00 S108 SIR-1100 IRA-743
D405 TP214 XZ95844 S920 SIR-200 GT-73 SR-4 D405-II SIR-400 SR-3 D406 SQ407 Arsen X np D407 A490 A520E HP555 SR-7 D407-III A530E Adsorbent Resins and Inert Resins DA201-A XAD-2 DA201-B EP63 HP 21 XAD-3 DA201-C MN-200 DA201-C II SD-2 MN500 DA201-D XAD-4 DA201-DII XAD-1180 DA201-E SP825 DA201-G SP207 DA201-H XAD-16 DA201-M XAD-7 S-TR IN38 IP-5 IT-1 359 S-TR( 蓝色 ) IP-7 Ion exchange Resins used as Chromatographic Media DTF-01 PCR CR1310 DTF-02 PCR DTF-03 PCA Adsorbent Resins used as Chromatographic Media CX-01 Inert Particles (Inert Resins) EPS QL-2 IN42 XZ46287 IP-4 IT-5 RF-12