The Nervous System Overview Nerve Impulses (completed12/03/04) (completed12/03/04) How do nerve impulses start? (completed 19/03/04) (completed 19/03/04) How Fast are Nerve Impulses? Nerve Impulses Nerve Impulses Neurones send messages electrochemically this means that chemicals cause an electrical impulse. Chemicals in the body are electrically charged when they have an electrical charge, they are called ions. Resting Membrane Potential When a neurone is not sending a signal, it is at rest. The inside of the neurone is negative relative to the outside. K+ can cross through the membrane easily Cl- and Na+ have a more difficult time crossing Negatively charged protein molecules inside the neurone cannot cross the membrane. 1
The membranes contain sodiumpotassium pumps (Na+K+ATPase). Uses ATP to simultaneously pump 3 sodium ions out of the cell and 2 potassium ions in. There are also sodium and potassium ion channels in the membrane. These channels are normally, but even when, they leak, allowing sodium ions to leak in and potassium ions leak out down their concentration gradients. 3Na + outside cell membrane inside Na + + Na K ATPase ATP ADP+P i 2K + K + - Ion Concentration inside Concentration outside cell/mmol dm -3 cell/mmol dm -3 K + 150.0 2.5 Na + 15.0 145.0 Cl - 9.0 101.0 The imbalance of ions causes a potential difference (or voltage) between the inside of the neurone and its surroundings The resting membrane potential is 70mV Overall: K+ pass easily into the cell Cl- and Na+ have a more difficult time crossing Negatively charged protein molecules (A-) inside the neurone cannot pass the membrane. The Na+K+ATPase pump uses energy to move 3 Na+ out for every 2K+ in to neurone This imbalance in voltage causes a potential difference across the cell membrane called the resting membrane potential. Membrane potential is always negative inside the cell. The Na + K + ATPase is thought to have evolved as an osmoregulator to keep the internal water potential high and so stop water entering animal cells and bursting them. Plant cells don t need this as they have strong cells walls to prevent bursting. How do Nerve Impulses Start? 2
How do Nerve Impulses Start? Neurones are stimulated by receptor cells These contain special sodium channels that are not voltage-gated, but are gated by the appropriate stimulus. stimulus causes the sodium channel to open Causes sodium ions to flow into the cell Causes a depolarisation of the membrane potential affects the voltage-gated sodium channels nearby and starts an action potential. How do Nerve Impulses Start? Some examples: chemical-gated sodium channels in tongue taste receptor cells open when a certain chemical in food binds to them mechanically-gated ion channels in the hair cells of the inner ear open when they are distorted by sound vibrations; and so on. How do Nerve Impulses Start? In each case the correct stimulus causes the sodium channel to open (reaches the threshold value) causes sodium ions to flow into the cell causes a depolarisation of the membrane potential affects the voltage-gated sodium channels nearby and starts an action potential. (AP) The resting potential tells about what happens when a neurone is at rest. An action potential occurs when a neurone sends information down an axon. Is an explosion of electrical activity The resting membrane potential changes AP - Depolarisation Resting potential is 70mv (inside the axon). When stimulated, the membrane potential is briefly depolarised Stimulus causes the membrane at one part of the neurone to increase in permeability to Na+ ions Na+ channels open. This causes resting potential to move towards 0mV 3
AP - Depolarisation When depolarisation reaches 30mV more Na+ channels open for 0.5ms Causes Na+ to rush in cell becomes more positive AP - Repolarisation At a certain point, the depolarisation of the membrane causes the Na+ channels to close This causes K+ channels open out in Na Na + open K - + out in Na K open K + + - AP - Repolarisation AP - Overview K+ rush out making inside the cell more negative. Since this restores the original polarity, it is called repolarisation There is a slight overshoot in the movement of K+ (called hyperpolarisation). Resting membrane potential is restored by the Na+K+ATPase pump out K + + Na K in open - (Click here for animation) AP All or nothing AP only happens if the stimulus reaches a threshold value Stimulus is strong enough to cause an AP It is an all or nothing event because once it starts, it travels to the synapse. AP is always the same size Frequency of the impulse carries information strong stimulus = high frequency At rest, the inside of the neuron is slightly negative due to a higher concentration of positively charged sodium ions outside the neuron. 4
When stimulated past the threshold, sodium channels open and sodium rushes into the axon, causing a region of positive charge within the axon. The region of positive charge causes nearby sodium channels to open. Just after the sodium channels close, the potassium channels open wide, and potassium exits the axon. This process continues as a chain-reaction along the axon. The influx of sodium depolarises the axon, and the outflow of potassium repolarises the axon. The sodium/potassium pump restores the resting concentrations of sodium and potassium ions AP Refractory Period There is a time after depolarisation where no new AP can start called the refractory period. Time is needed to restore the proteins of voltage sensitive ion channels to their original resting conditions NA+ channels cannot be opened, as it can t be depolarised again Therefore impulses travel in one direction Can last up to 10 milliseconds this limits the frequency of impulses 5
AP - Refractory Period Absolute refractory period = During the action potential, a second stimulus will not cause a new AP Exception: There is an interval in which a second AP can be produced but only if the stimulus is considerably greater than the threshold = relative refractory period Refractory period can limit the number of AP in a given time. Average = about 100 action potentials/s How Fast are Nerve Impulses? How fast are impulses? AP can travel 0.1-100m/s along axons Allows for fast responses to stimuli Speed is affected by: Temperature Axon diameter Myelin sheath Myelinated Neurones The axons of many neurones are encased in a fatty myelin sheath (schwann cells). Where the sheath of one Schwann cell meets the next, the axon is unprotected. The voltage-gated sodium channels of myelinated neurons are confined to these spots (called nodes of Ranvier). Na + Na + Na + Myelinated Neurones The in rush of sodium ions at one node creates just enough depolarisation to reach the threshold of the next. In this way, the action potential jumps from one node to the next (1mm) called saltatory propagation (click here for animation) Results in much faster propagation of the nerve impulse than is possible in nonmyelinated neurons. Na + Na + Na + Sodium channel Nodes of Ranvier Sodium channel Nodes of Ranvier 6
Facts about Propagation Nerve impulse conduction is really the bumping of positive charge down the axon AP initiated at one end of the axon is only propagate in one direction. The AP doesn t turn back because the membrane just behind is in its refractory period i.e. voltage gated Na+ channels are inactivated Facts about propagation To increase conduction velocity: Increase the axonal diameter Myelin of the axon facilitates current flow down the inside of the axon. Breaks in the myelin wrapping occur at the Nodes of Ranvier, which have increased concentrations of voltage gated Na+ channels. Regeneration of the AP occurs at the nodes Saltatory conduction propagation and regeneration of an AP down myelinated axon E.g. Local anaesthesia temporarily blocks AP generation by binding the interior of voltage gated Na+ channels - Neurotransmitters Junction between two neurones is called a synapse An AP cannot cross the synaptic cleft Impulse is carried by chemicals called neurotransmitters Neurotransmitters are made by the cell sending the impulse (the pre-synaptic neurone) and stored in synaptic vesicles at the end of the axon The cell receiving the impulse (postsynaptic neurone) has chemical gated ion channels called neuroreceptors 7
At the end of the presynaptic neurone there are voltage gated calcium channels. When AP reaches the synapse, the channels open Calcium ions flow into the cell Click here for animation Calcium ions cause synaptic vesicles to fuse with the cell membrane Neurotransmitters diffuse across the synaptic cleft Neurotransmitter binds to neuroreceptors in the post-synaptic membrane Channels open, Na + flow in Causes depolarisation AP initiated in postsynaptic neurone Function: Prevents impulses travelling in the wrong direction. An impulse can pass along an axon in either direction, but can only cross a synapse in one direction because the synaptic vesicles are only found in the synaptic knobs and end plates A vast number of synaptic connections allow for great flexibility. They are equivalent to the switchboard in an elaborate telephone exchange enabling messages to be diverted from one line to another and so on Integrating Signals If the diffusion of ions reaches a threshold value, it will cause the AP in the postsynaptic membrane. 8
Neurotransmitters Neurotransmitters are broken down by a specific enzyme in the synaptic cleft. Breakdown products are absorbed by the pre-synaptic neurone Used to re-synthesise more neurotransmitter Neurotransmitters Acetylcholine (ACh) Released by motor neurones onto skeletal muscle cells Released by neurones in the parasympathetic nervous system Cholinergic synapses Ach is removed from the synapse by acetylcholinesterase Nerve gasses used in warfare (e.g. sarin) and the organophosphate insecticides (e.g. parathion) achieve their effects by inhibiting acetylcholinesterase this allowing Ach to remain active. Atropine is used as an antidote because it blocks ACh receptors Neurotransmitters Noradrenaline Released by neurones in the sympathetic nervous system Adrenergic synapses 9