PHP/PHD355E Rev. 6 25 March 22 Product data 1. Description N-channel standard level field-effect power transistor in a plastic package using TrenchMOS 1 technology. Product availability: PHP355E in SOT78 (TO-22AB) PHD355E in SOT428 (D-PAK). 2. Features Fast switching Low on-state resistance. 3. Applications 4. Pinning information DC to DC converters Switch mode power supplies. Table 1: Pinning - SOT78, SOT428 simplified outline and symbol Pin Description Simplified outline Symbol 1 gate (g) 2 drain (d) [1] 3 source (s) mb mounting base, connected to drain (d) mb 1 2 3 MBK16 SOT78 (TO-22AB) Top view mb 2 1 3 MBK91 SOT428 (D-PAK) g MBB76 d s [1] It is not possible to make connection to pin 2 of the SOT428 package. 1. TrenchMOS is a trademark of Koninklijke Philips Electronics N.V.
5. Quick reference data Table 2: Quick reference data Symbol Parameter Conditions Typ Max Unit V DS drain-source voltage (DC) 25 C T j 175 C - 6 V I D drain current (DC) T mb =25 C; V GS = 5 V - 1.3 A P tot total power dissipation T mb =25 C - 33 W T j junction temperature - 175 C R DSon drain-source on-state resistance T j =25 C; V GS =1V; I D = 5.5 A 12 15 mω 6. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 6134). Symbol Parameter Conditions Min Max Unit V DS drain-source voltage (DC) 25 C T j 175 C - 6 V V DGR drain-gate voltage (DC) 25 C T j 175 C; R GS =2kΩ - 6 V V GS gate-source voltage (DC) - ±2 V I D drain current (DC) T mb =25 C; V GS =1V;Figure 2 and 3-1.3 A T mb = 1 C; V GS =1V;Figure 2-7.3 A I DM peak drain current T mb =25 C; pulsed; t p 1 µs; Figure 3-41 A P tot total power dissipation T mb =25 C; Figure 1-33 W T stg storage temperature 55 +175 C T j operating junction temperature 55 +175 C Source-drain diode I S source (diode forward) current (DC) T mb =25 C - 1.3 A I SM peak source (diode forward) current T mb =25 C; pulsed; t p 1 µs - 41 A Avalanche ruggedness E DS(AL)S non-repetitive drain-source avalanche energy unclamped inductive load; I D = 3.3 A; t AL =.22 ms; V DD 25 V; R GS =5Ω; V GS = 1 V; starting T j =25 C I DS(AL)S non-repetitive avalanche current unclamped inductive load; V DD 25 V; R GS =5Ω; V GS =1V;Figure 4-25 mj - 1.3 A Product data Rev. 6 25 March 22 2 of 14
12 3aa16 12 3aa24 P der I der (%) (%) 8 8 4 4 5 1 15 2 T mb ( o C) 5 1 15 2 T mb ( o C) P der P tot I D = ---------------------- 1% I P der = ------------------ 1% I tot ( 25 C ) D25C ( ) Fig 1. Normalized total power dissipation as a function of mounting base temperature. Fig 2. Normalized continuous drain current as a function of mounting base temperature. 1 2 3ah36 I D (A) Limit R DS(on) = V DS / I D 1 t p = 1 µs 1 DC 1 µs 1 ms 1 ms 1-1 1 1 1 2 V DS (V) Fig 3. T mb =25 C; I DM is single pulse. Safe operating area; continuous and peak drain currents as a function of drain-source voltage. Product data Rev. 6 25 March 22 3 of 14
1 2 3ah43 I DS(AL)S (A) 1 25 ºC 1 T j prior to avalanche = 15 ºC 1-1 1-3 1-2 1-1 1 1 t AL (ms) Unclamped inductive load; V DD 25 V; R GS =5Ω; V GS = 1 V; starting T j =25 C and 15 C. Fig 4. Non-repetitive avalanche ruggedness current as a function of pulse duration. Product data Rev. 6 25 March 22 4 of 14
7. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-mb) thermal resistance from junction to mounting base Figure 5 - - 4.5 K/W R th(j-a) thermal resistance from junction to ambient SOT78 package; vertical in still air - 6 - K/W SOT428 package; SOT428 minimum footprint; mounted on a PCB - 75 - K/W 7.1 Transient thermal impedance SOT428 packages; SOT44 minimum footprint; mounted on a PCB - 5 - K/W 1 3ah35 Z th(j-mb) (K/W) δ =.5 1.2.1.5 P t p δ = T 1-1.2 single pulse 1-6 1-5 1-4 1-3 1-2 1-1 1 t p (s) t p T t Fig 5. Transient thermal impedance from junction to mounting base as a function of pulse duration. Product data Rev. 6 25 March 22 5 of 14
8. Characteristics Table 5: Characteristics T j =25 C unless otherwise specified Symbol Parameter Conditions Min Typ Max Unit Static characteristics V (BR)DSS drain-source breakdown voltage I D =.25 ma; V GS =V T j =25 C 6 - - V T j = 55 C 55 - - V V GS(th) gate-source threshold voltage I D = 1 ma; V DS =V GS ; Figure 1 T j =25 C 2 3 4 V T j = 175 C 1 - - V T j = 55 C - - 6 V I DSS drain-source leakage current V DS =55V; V GS =V T j =25 C -.5 1 µa T j = 175 C - - 5 µa I GSS gate-source leakage current V GS = ±1 V; V DS = V - 1 1 na R DSon drain-source on-state resistance V GS = 1 V; I D = 5.5 A; Figure 8 and 9 T j =25 C - 12 15 mω T j = 175 C - 25 315 mω Dynamic characteristics Q g(tot) total gate charge I D =1A;V DD =44V;V GS =1V;Figure 14-5.8 - nc Q gs gate-source charge - 1.5 - nc Q gd gate-drain (Miller) charge - 3.2 - nc C iss input capacitance V GS =V; V DS = 25 V; f = 1 MHz; Figure 12-19 25 pf C oss output capacitance - 55 8 pf C rss reverse transfer capacitance - 4 5 pf t d(on) turn-on delay time V DD =3V; R L = 2.7 Ω; V GS =1V; - 3 1 ns t r rise time R G = 5.6 Ω; resistive load - 26 35 ns t d(off) turn-off delay time - 8 15 ns t f fall time - 1 2 ns Source-drain diode V SD source-drain (diode forward) voltage I S = 1 A; V GS =V;Figure 13-1.1 1.5 V t rr reverse recovery time I S = 1 A; di S /dt = 1 A/µs; V GS =V - 32 - ns Q r recovered charge - 5 - nc Product data Rev. 6 25 March 22 6 of 14
1 I D (A) 8 T j = 25 C 1 V 8 V 3ah37 7 V 1 I D (A) 8 V DS > I D x R DSon 3ah39 6.5 V 6 6 6 V 4 5.5 V 4 2 5 V V GS = 4.5 V.4.8 1.2 1.6 2 V DS (V) 2 175 ºC T j = 25 ºC 2 4 6 8 V GS (V) Fig 6. T j =25 C Output characteristics: drain current as a function of drain-source voltage; typical values. Fig 7. T j =25 C and 175 C; V DS > I D xr DSon Transfer characteristics: drain current as a function of gate-source voltage; typical values..5 R DSon (Ω).4 3ah38 V GS = 5 V 5.5V T j = 25 ºC 6 V 2.4 a 1.8 3aa28.3 6.5 V 7 V 1.2.2 8 V.1 1 V.6 2 4 6 8 1 I D (A) -6 6 12 18 T j ( o C) T j =25 C R a = DSon --------------------------- R DSon ( 25 C ) Fig 8. Drain-source on-state resistance as a function of drain current; typical values. Fig 9. Normalized drain-source on-state resistance factor as a function of junction temperature. Product data Rev. 6 25 March 22 7 of 14
5 V GS(th) (V) 4 max 3aa32 1-1 I D (A) 1-2 3aa35 3 typ 1-3 min typ max 2 min 1-4 1 1-5 -6 6 12 18 T j ( o C) 1-6 2 4 6 V GS (V) I D = 1 ma; V DS =V GS T j =25 C; V DS =5V Fig 1. Gate-source threshold voltage as a function of junction temperature. Fig 11. Sub-threshold drain current as a function of gate-source voltage. 1 3 3ah41 C (pf) C iss 1 2 C oss C rss 1 1-1 1 1 1 2 V DS (V) V GS =V;f=1MHz Fig 12. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values. Product data Rev. 6 25 March 22 8 of 14
1 I S (A) 8 V GS = V 3ah4 15 V GS (V) 12 I D = 1 A T j = 25 ºC 3ah42 V DD = 11 V 44 V 6 9 4 175 ºC 6 2 T j = 25 ºC 3.4.8 1.2 V SD (V) 2 4 6 8 Q G (nc) T j =25 C and 175 C; V GS =V Fig 13. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values. I D = 1 A; V DD = 11 V and 44 V Fig 14. Gate-source voltage as a function of gate charge; typical values. Product data Rev. 6 25 March 22 9 of 14
9. Package outline Plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-22AB SOT78 E p A A 1 D 1 q mounting base D L 1 (1) L 2 Q L b 1 1 2 3 b c e e 5 1 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b b1 c D D1 E e L L2 L1 (1) p max. mm 4.5 1.39.9 1.3.7 15.8 6.4 1.3 15. 3.3 3.8 2.54 3. 4.1 1.27.7 1..4 15.2 5.9 9.7 13.5 2.79 3.6 q 3. 2.7 Q 2.6 2.2 Note 1. Terminals in this zone are not tinned. OUTLINE VERSION SOT78 REFERENCES IEC JEDEC EIAJ 3-lead TO-22AB SC-46 EUROPEAN PROJECTION ISSUE DATE -9-7 1-2-16 Fig 15. SOT78 (TO-22AB). Product data Rev. 6 25 March 22 1 of 14
Plastic single-ended surface mounted package (Philips version of D-PAK); 3 leads (one lead cropped) SOT428 seating plane y E A A 2 A b 2 A 1 E 1 mounting base D 1 D H E L 2 2 1 3 L L 1 b 1 b w M A c e e 1 DIMENSIONS (mm are the original dimensions) UNIT A mm 2.38 2.22 Note 1. Measured from heatsink back to lead. OUTLINE VERSION A 1 (1).65.45 REFERENCES 1 2 mm scale D A 2 b b 1 b 2 c D 1 L E E 1 e e H 1 E w min. 1 L L min. 2.93.73.89.71 1.1.9 5.46 5.26.4.2 6.22 5.98 IEC JEDEC JEITA SOT428 TO-252 SC-63 4. 6.73 6.47 4.81 4.45 2.285 4.57 1.4 9.6 2.95 2.55.5.9.5 EUROPEAN PROJECTION y max..2.2 ISSUE DATE 99-9-13 1-12-11 Fig 16. SOT428 (D-PAK). Product data Rev. 6 25 March 22 11 of 14
1. Revision history Table 6: Revision history Rev Date CPCN Description 6 22325 - Product data; sixth version; supersedes PHD_PHP355E_5 of 1 August 1999. Modifications: The format of this specification has been redesigned to comply with Philips Semiconductors new presentation and information standard Product data Rev. 6 25 March 22 12 of 14
11. Data sheet status Data sheet status [1] Product status [2] Definition Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-65A. [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 12. Definitions 13. Disclaimers Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 6134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Life support These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information, please visit http://www.semiconductors.philips.com. For sales office addresses, send e-mail to: sales.addresses@www.semiconductors.philips.com. Fax: +31 4 27 24825 9397 75 9354 Koninklijke Philips Electronics N.V. 22. All rights reserved. Product data Rev. 6 25 March 22 13 of 14
Contents 1 Description............................. 1 2 Features............................... 1 3 Applications............................ 1 4 Pinning information...................... 1 5 Quick reference data..................... 2 6 Limiting values.......................... 2 7 Thermal characteristics................... 5 7.1 Transient thermal impedance.............. 5 8 Characteristics.......................... 6 9 Package outline........................ 1 1 Revision history........................ 12 11 Data sheet status....................... 13 12 Definitions............................ 13 13 Disclaimers............................ 13 Koninklijke Philips Electronics N.V. 22. Printed in The Netherlands All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 25 March 22 Document order number: 9397 75 9354