Report : 08-06- Page o : Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 40-:997/SO 40-:997 coustics - Measurement of sound insulation in buildings and of building elements Part : 998-05-04 Requirements for laboratory test facilities with suppressed flanking transmission SS 40-:99/SO 40-:99 coustics - Measurement of sound insulation in buildings and of building elements Part : 996-09-0 Determination, verification and application of precision data SS 40-:995/SO 40-:995 coustics - Measurement of sound insulation in buildings and of building elements Part : 995-06-6 Laboratory measurements of airborne sound insulation of building elements SS 40-4:998/SO 40-4:998 coustics - Measurement of sound insulation in buildings and of building elements Part 4: 999-04-09 Field measurements of airborne sound insulation between rooms SS 40-5:998/SO 40-5:998 coustics - Measurement of sound insulation in buildings and of building elements Part 5: 999-0-0 Field measurements of airborne sound insulation of facade elements and facades SS 40-7:998/SO 40-7:998 coustics - Measurement of sound insulation in buildings and of building elements Part 7: 999-0-0 Field measurements of impact sound insulation of floors SS 40-8:997/SO 40-8:997 coustics - Measurement of sound insulation in buildings and of building elements Part 8: 998-09-0 Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor SS 40-:005/SO 40-:005 coustics - Measurement of sound insulation in buildings and of building elements Part : 005--04 Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors SS 40-4:005/SO 40-4:004 coustics - Measurement of sound insulation in buildings and of building elements Part 4: 005-0-8 Guidelines for special situations in the field SS 656:008 Sound level meters 008-0-5 C 005-04-0 006--5 005-05-0 006--0 006--0 006--0 006--0 05-- 07-08-7 05-- 07-08-7 07-08-7 07-08-7 0--0 05-- 05-- 0-0-5 SS 658:008 ntegrating-averaging sound level meters 008-0-5 0-0-5 SS 77-:996/SO 77-:996 coustics - Rating of sound insulation in buildings and of building elements Part : irborne sound insulation 998-05-04 006--5 07-08-7 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 77-:996/SO 77-:996 coustics - Rating of sound insulation in buildings and of building elements Part : 998-05-04 mpact sound insulation SS 45-:008.0 Hearing protectors Part : Ear-muffs 008-0-07 006--5 008-0-07 07-08-7 0-0-07 SS 45-:008.0 Hearing protectors Part : Ear-plugs 008-0-4 008-0-4 0-0-4 SS 45-:04.0 Hearing protectors Part : Ear-muffs attached to an industrial safety helmet 04-0-4 04-0-4 09-0-4 SS 470-:008.0 Sound power labelling Part : Compressors 008-0- 008-0- 0-0- SS 470-:008.0 Sound power labelling Part : Welding generators 008-0- 008-0- 0-0- SS 470-:008 Sound power labelling Part : Rotating electrical machinery 008-04- 0-04- SS 470-4:008 Sound power labelling Part 4: Pneumatic equipment 008-04- 0-04- SS 676-:0/SO 040-:00 SS 676-:0/SO 040-:00 SS 676-:0/SO 040-:00 SS 676-4:0/SO 040-4:00 SS 676-5:0/SO 040-5:00 SS 04:009/SO 04:009 coustics - Laboratory measurement of sound insulation of building elements Part : pplication rules for specific products coustics - Laboratory measurement of sound insulation of building elements Part : Measurement of airborne sound insulation coustics - Laboratory measurement of sound insulation of building elements Part : Measurement of impact sound insulation coustics - Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements coustics - Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment Mechanical vibration, shock and condition monitoring - Vocabulary 0-- 0-- 0-- 0-- 0-- 009-- 0-- 08-- 08-- 08-- 08-- 08-- 09-0-4 SS 6-:997/SO 6-:997 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration Part : General requirements 999-0-05 006--0 09-0-4 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 6-:0/SO 6-:00 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration 0-0-0 Part : Vibration in buildings ( Hz to 80 Hz) SS 6-4:0/SO 6-4:00 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration 0-0-0 Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixedguideway transport systems SS 6-5:0/SO 6-5:004 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - 0-0-0 Part 5: Method for evaluation of vibration containing multiple shocks SS 8-:04/SO 8-:009 coustics - Measurement of room acoustic 04-0- parameters Part : Performance spaces 0-0-0 0-08-5 0-08- 0-08- 09-0- SS 8-:04/SO 8-:008 SS 8-:04/SO 8-:0 coustics - Measurement of room acoustic parameters Part : Reverberation time in ordinary rooms coustics - Measurement of room acoustic parameters Part : Open plan offices 04-0-4 04-0-4 C 04-0-4 09-0-4 09-0-4 SS 74:999/SO 74:999 SS 74-:0/SO 74-:00 SS 74-:994/SO 74-:994 SS 744:0/SO 744:00 SS 746:0/SO 746:00 coustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms coustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Part : Comparison method for a hard-walled test room coustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Part : Methods for special reverberation test rooms coustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane coustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane 000-0-0 0-0-0 995-0-0 0-0-0 0-0-0 006--5 006--0 0--5 0-08- 07-08-7 07-0-0 0-08-5 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : 4 Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 4866:0/SO 4866:00 Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the 0--09 measurement of vibrations and evaluation of their effects on structures SS 80:987/SO 80:987 coustics - udible emergency evacuation 00-0-09 signal 007-0-0 0-08-5 07-08-7 SS 85-:0/SO 85-:00 SS 85-:0/SO 85-:009 SS 85-:06/SO 85-:0 coustics - udiometric test methods Part : Pure-tone air and bone conduction audiometry coustics - udiometric test methods Part : Sound field audiometry with pure-tone and narrow-band test signals coustics - udiometric test methods Part : Speech audiometry 0--09 0--09 06-0-9 06--09 0-08-5 0-0-9 SS 897:994/SO 897:994 SS 866-:988/SO 866-:988 SS 866-:00/SO 866-:999 SS 964-:99/SO 964-:99 SS 964-:996/SO 964-:996 SS 964-:005/SO 964-:00 SS 008:0 SS 00:008 SS 07:008 5.0 6.0 coustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method Hand-held portable power tools - Measurement of vibrations at the handle Part : General Hand-held portable power tools - Measurement of vibrations at the handle Part : Fastener driving tools coustics - Determination of sound power levels of noise sources using sound intensity Part : Measurement at discrete points coustics - Determination of sound power levels of noise sources using sound intensity Part : Measurement by scanning coustics - Determination of sound power levels of noise sources using sound intensity Part : Precision method for measurement by scanning The measurement and assessment of occupational noise for hearing conservation purposes The measurement and rating of environmental noise with respect to annoyance and to speech communication Calculation and prediction of aircraft noise around airports for land use purposes 999-07- 999-07-6 00-04-5 997-05-05 997-0- 005--04 0-07- 008-0-5 008-0-08 006--0 006--0 00-04-5 006--0 006--5 0-07- 008-0-08 07-0-05 07-0-05 09-0-4 07--4 07-0-05 07-0-05 08-07- 0-0-5 0-0-08 07-04- mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : 5 Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 054-:0.0 Calibration of pure-tone audiometers Part : 0-0-4 ir conduction 0-0-4 07-0-4 SS 054-:0.0 Calibration of pure-tone audiometers Part : Bone conduction 0-0-0 0-0-0 07-0-0 SS 069:004 SS 08:00.0.06 Determining the performance of audible warning devices (hooters) after installation in a motor vehicle The measurement of noise emitted by road vehicles when stationary 004-09-0 00--07 6 004-09-0 00--07 00-04-7 00-04-7 SS 08:006.0 The measurement and assessment of acoustic environments for audiometric tests 006--0 006--0 07-08-0 SS 09:007/SO 740:000 SS 096:007/SO 745:00 SS 005:007.0 coustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards coustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemianechoic rooms The measurement of noise emitted by motor vehicles in motion 007-09-4 007-09-4 007-09-07 007-09-07 09-0-4 0-09-4 00-04-7 SS 00:004.0 Calculating and predicting road traffic noise 004--5 004--5 07-08-0 SS 0:008.0 The measurement of noise inside motor vehicles 008-0-08 008-0-08 0-0-08 SS 08-:004 SS 08-:004 SS 08:00 SS 08:008.0.0.0 coustical properties of buildings Part : Grading criteria for the airborne sound insulation properties of buildings coustical properties of buildings Part : The assessment of building plans and buildings with respect to their acoustical properties Engine speed (S values), reference sound levels and permissible sound levels of stationary road vehicles Methods for environmental noise impact assessments 004-08-0 004-08-06 00--05 008-0-5 004-08-0 004-08-06 00--05 07-06-9 07-06-9 0-04-04 00-05-9 SS 057:004.0 The calculation of sound propagation by the Concawe method 004-08-06 004-08-06 07-09- mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : 6 Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 084:997 SS 00:995/SO 00:995 SS 0:0/SO 0:00 SS 0:0/SO 0:00 SS 0:995/SO 0:995 SS 04:0/SO 04:00 SS 688-:995/SO/TR 688-:995 SS 688-:998/SO/TR 688-:998 SS 690-:996/SO 690-:996 SS 690-:996/SO 690-:996 SS 690-:997/SO/TR 690-:997 coustics - Methods for the description and physical measurement of single impulses or series of impulses coustics - oise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions coustics - oise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections coustics - oise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections coustics - oise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level coustics - oise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections coustics - Recommended practice for the design of low-noise machinery and equipment Part : Planning coustics - Recommended practice for the design of low-noise machinery and equipment Part : ntroduction to the physics of low-noise design coustics - Recommended practice for the design of low-noise workplaces containing machinery Part : oise control strategies coustics - Recommended practice for the design of low-noise workplaces containing machinery Part : oise control measures coustics - Recommended practice for the design of low-noise workplaces containing machinery Part : Sound propagation and noise prediction in workrooms 998-06- 998-09-0 0-09-0 0-0-0 998-09-0 0-04- 998-07-0 999-07- 997-0- 997-0- 997-0-0 C 007-0- 006--5 006--0 006--0 006--5 006--0 006--0 006--0 0-0- 09-0-4 08-09-0 07-0-0 09-0-4 07-04- 09-0- 07-08-7 07-08-7 07-08-7 07-08-7 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : 7 Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 474:0/SO 474:009 coustics - Framework for calculating a distribution of sound exposure levels for 0-0-0 impulsive sound events for the purposes of environmental noise assessment SS 475-:999/SO 475-:999 coustics - Stationary audible warning devices used outdoors Part : Field 000-0-7 measurements for determination of sound emission quantities SS 606-:008/SO 606-:998 008-0-5 shock transducers Part : Basic concepts 006--0 07-0-0 07-08-7 08-09-06 SS 606-:008/SO 606-:999 SS 606-:008/SO 606-:00 SS 606-:008/SO 606-:00 SS 606-:008/SO 606-:005 SS 606-:009/SO 606-:009 SS 008:97/ECE R8:97 SS 897-:04/SO 897-:009 SS 897-:04/SO 897-:009 SS 897-:04/SO 897-:009 SS 897-4:04/SO 897-4:009 SS 897-5:04/SO 897-5:009 shock transducers Part : Primary vibration calibration by laser interferometry shock transducers Part : Primary shock calibration using laser interferometry shock transducers Part : Vibration calibration by comparison to a reference transducer shock transducers Part : Shock calibration by comparison to a reference transducer shock transducers Part : Testing of transverse vibration sensitivity Uniform provisions for the approval of audible warning devices and of motor vehicles with regard to their audible signals Part : ngle and vertical grinders Part : Wrenches, nutrunners and screwdrivers Part : Polishers and rotary, orbital and random orbital sanders Part 4: Straight grinders Part 5: Drills and impact drills 008-0-5 008-0-0 008-0-5 008-0-0 009--0 999--6 04-0-7 04-0-7 04-0-7 04-0-7 04-0-7 08-09-06 08-09-06 08-09-06 08-09-06 09-0-4 05-- 09-0-7 09-0-7 09-0-7 09-0-7 09-0-7 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen C 0-09-06 004-05-8
Report : 08-06- Page o : 8 Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 897-6:04/SO 897-6:009 04-0-7 Part 6: Rammers SS 897-7:04/SO 897-7:009 04-0-7 Part 7: ibblers and shears SS 897-8:0/SO 897-8:009-0-0-0 Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action SS 897-9:04/SO 897-9:009 04-0-7 Part 9: Scaling hammers and needle scalers SS 897-0:04/SO 897-0:009 04-0-7 Part 0: Percussive drills, hammers and breakers SS 897-:04/SO 897-:009 04-0-7 Part : Stone hammers SS 897-:04/SO 897-:009 04-0-7 Part : Die grinders SS 505-:008.0 008-05- testing Part : Ear-muffs 008-05- 09-0-7 09-0-7 07-0-0 09-0-7 09-0-7 09-0-7 09-0-7 08-07-9 SS 505-:008.0 testing Part : Ear-plugs 008-05- 008-05- 08-07-9 SS 505-:008 SS 505-5:005/E 5-5:00 SS 505-6:005/E 5-6:00 SS 505-7:005/E 5-7:00.0 testing Part : Ear-muffs attached to an industrial safety helmet testing Part 5: ctive noise reduction earmuffs testing Part 6: Ear-muffs with electrical audio input testing Part 7: Level-dependent ear-plugs 008-07-04 005--04 005--04 005--04 008-07-04 08-07-9 07-08-7 07-08-7 07-08-7 SS 50458:008/E 458:004 Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document 008-0-08 08-09-06 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen
Report : 08-06- Page o : 9 Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 6068-6:04/EC 6068-6:0 Sound system equipment - Part 6: Objective 04-09- rating of speech intelligibility by speech transmission index SS 6094:00/EC 6094:00 Electroacoustics - Sound calibrators 00-08-9 09-09- 09-0-4 SS 6094-:009/EC 6094-:000 SS 6094-:009/EC 6094-:009 SS 6094-:009/EC 6094-:995 SS 6094-4:009/EC 6094-4:995 SS 6094-5:009/EC 6094-5:00 SS 6094-6:009/EC 6094-6:004 SS 660:009/EC 660:995 Measurement microphones Part : Specifications for laboratory standard microphones Electroacoustics - Measurement microphones Part : Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique Measurement microphones Part : Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique Measurement microphones Part 4: Specifications for working standard microphones Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison Measurement microphones Part 6: Electrostatic actuators for determination of frequency response Electro-acoustics - Octave-band and fractional-octave-band filters 009-07-0 009-07-7 009--06 009-- 009-07-7 009-0-0 009-- 009-- 0-08- 04-07-7 04--06 04-- 04-07-7 04-0-0 04-- SS 667-:00/EC 667-:00 Electroacoustics - Sound level meters Part : Specifications 00-09-9 04-0-0 SS 667-:00/EC 667-:00 Electroacoustics - Sound level meters Part : Pattern evaluation tests 00-0- 04-0-0 SS 667-:007/EC 667-:006 Electroacoustics - Sound level meters Part : Periodic tests 007-- 0-- RP 009:04 Recommendations for specifying sets of tests for periodic testing of sound level meters and accompanying instruments 04-0-8 09-0-8 mendment otes: - ational or - nternational - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, - nformation Sheet, K - Collective mendment, S - Supplemen