Mechanics of Earthquakes and Faulting

Similar documents
Mechanics of Earthquakes and Faulting

Mechanics of Earthquakes and Faulting

Source parameters II. Stress drop determination Energy balance Seismic energy and seismic efficiency The heat flow paradox Apparent stress drop

The San Andreas Fault Observatory at Depth: Recent Site Characterization Studies and the 2.2-Km-Deep Pilot Hole

Earthquake stress drop estimates: What are they telling us?

A mechanical model of the San Andreas fault and SAFOD Pilot Hole stress measurements

Earthquake Stress Drops in Southern California

Using information about wave amplitudes to learn about the earthquake size.

Seismic and aseismic processes in elastodynamic simulations of spontaneous fault slip

Regional tectonic stress near the San Andreas fault in central and southern California

FRICTIONAL HEATING DURING AN EARTHQUAKE. Kyle Withers Qian Yao

STUDYING THE IMPORTANT PARAMETERS IN EARTHQUAKE SIMULATION BASED ON STOCHASTIC FINITE FAULT MODELING

Frictional behavior of materials in the 3D SAFOD volume

OVERVIEW INTRODUCTION 3 WHAT'S MISSING? 4 OBJECTIVES 5

Di#erences in Earthquake Source and Ground Motion Characteristics between Surface and Buried Crustal Earthquakes

Magnitude, scaling, and spectral signature of tensile microseisms

Mechanics of faulting

Qualitative modeling of earthquakes and aseismic slip in the Tohoku-Oki area. Nadia Lapusta, Caltech Hiroyuki Noda, JAMSTEC

Mechanics of Earthquakes and Faulting

Internal Layers of the Earth

Potency-magnitude scaling relations for southern California earthquakes with 1.0 < M L < 7.0

Scaling Laws. σ 1. σ = mean stress, which is needed to compute σ 0. η = percent strain energy released in eq. Introduction.

Gutenberg-Richter Relationship: Magnitude vs. frequency of occurrence

An earthquake is the result of a sudden displacement across a fault that releases stresses that have accumulated in the crust of the earth.

What allows seismic events to grow big?: Insights from fault roughness and b-value analysis in stick-slip experiments

Seismic Efficiency, Overshoot and Enhanced Dynamic Weaking of Fractures Associated with Stimulation in Heavy Oil Reservoirs

Statistics of Earthquake Stress Drops on a Heterogeneous Fault in an Elastic Half-Space

Mechanics of Earthquakes and Faulting

PEAK AND ROOT-MEAN-SQUARE ACCELERATIONS RADIATED FROM CIRCULAR CRACKS AND STRESS-DROP ASSOCIATED WITH SEISMIC HIGH-FREQUENCY RADIATION

Magnitude-Area Scaling of Strike-Slip Earthquakes. Paul Somerville, URS

Mechanics of Earthquakes and Faulting

Apparent Slow Oceanic Transform Earthquakes Due to Source Mechanism Bias

Spatial and temporal stress drop variations in small earthquakes near Parkfield, California

The Mechanics of Earthquakes and Faulting

What is Q? Interpretation 1: Suppose A 0 represents wave amplitudes, then

Inferring fault strength from earthquake rupture properties and the tectonic implications of high pore pressure faulting

JournalofGeophysicalResearch: SolidEarth

Mechanics of Earthquakes and Faulting

Friction Constitutive Laws and. The Mechanics of Slow Earthquakes and the Spectrum of Fault Slip Behaviors

Outstanding Problems. APOSTOLOS S. PAPAGEORGIOU University of Patras

SOURCE MODELING OF RECENT LARGE INLAND CRUSTAL EARTHQUAKES IN JAPAN AND SOURCE CHARACTERIZATION FOR STRONG MOTION PREDICTION

Weakness of the Intracontinental Strike-Slip Kunlun Fault and Implications for Tibetan Tectonics

Elastic rebound theory

Scale Dependence in the Dynamics of Earthquake Rupture Propagation: Evidence from Geological and Seismological Observations

1/22/2015. High velocity shear experiments with possible implications to earthquake physics

friction friction a-b slow fast increases during sliding

Does Aftershock Duration Scale With Mainshock Size?

Research Themes in Stimulation Geomechanics. How do we optimize slickwater frac ing?

Peter Shearer 1, Robin Matoza 1, Cecily Wolfe 2, Guoqing Lin 3, & Paul Okubo 4

EARTHQUAKE LOCATIONS INDICATE PLATE BOUNDARIES EARTHQUAKE MECHANISMS SHOW MOTION

Modeling Approaches That Reproduce a Range of Fault Slip Behaviors: What We Have and What We Need Nadia Lapusta. California Institute of Technology

Earthquakes. Forces Within Eartth. Faults form when the forces acting on rock exceed the rock s strength.

Spectral Element simulation of rupture dynamics

Stress orientations at intermediate angles to the San Andreas Fault, California

Basics of the modelling of the ground deformations produced by an earthquake. EO Summer School 2014 Frascati August 13 Pierre Briole

A Theoretical Omega-Square Model Considering the Spatial Variation in Slip and Rupture Velocity

Source Duration Scales with Magnitude Differently For Earthquakes on the San Andreas Fault and on Secondary Faults in Parkfield, CA

Mechanics of Earthquakes and Faulting

Southern California ground motion envelopes over ranges of magnitudes, distances, and site conditions

22.5 Earthquakes. The tsunami triggered by the 2004 Sumatra earthquake caused extensive damage to coastal areas in Southeast Asia.

Friction. Why friction? Because slip on faults is resisted by frictional forces.

Utah State University. Ryan M. Lee Utah State University

Scaling Relations for Seismic Cycles on Mid-Ocean Ridge

Elastic Rebound Theory

Microseismic Monitoring Shale Gas Plays: Advances in the Understanding of Hydraulic Fracturing 20 MAR 16 HANNAH CHITTENDEN

Mechanics of Earthquakes and Faulting

UCERF3 Task R2- Evaluate Magnitude-Scaling Relationships and Depth of Rupture: Proposed Solutions

GLOBAL SOURCE PARAMETERS OF FINITE FAULT MODEL FOR STRONG GROUND MOTION SIMULATIONS OR PREDICTIONS

Earthquake Source Characteristics From Dynamic Rupture With Constrained Stochastic Fault Stress

Evidence for a strong San Andreas fault

Afterslip, slow earthquakes and aftershocks: Modeling using the rate & state friction law

JOURNAL OF PHYSICS OF THE EARTH, Vol. 19, No. 1,

Finite element modelling of fault stress triggering due to hydraulic fracturing

Resolution of the slow earthquake/high apparent stress paradox for oceanic transform fault earthquakes

EXAMINATION ON CONSECUTIVE RUPTURING OF TWO CLOSE FAULTS BY DYNAMIC SIMULATION

Magnitude Area Scaling of SCR Earthquakes. Summary

Measurements in the Creeping Section of the Central San Andreas Fault

HOMEWORK 3 Draft presentations due November 4 Oral presentations of Group problems, November 6, November 8

Broadband Records of Earthquakes in Deep Gold Mines and a Comparison with Results from SAFOD, California

EARTHQUAKE SOURCE PARAMETERS OF MODERATELY EARTHQUAKE IN THE SOUTH EASTERN IRAN BASED ON TELESEISMIC AND REGIONAL DISTANCES

Material is perfectly elastic until it undergoes brittle fracture when applied stress reaches σ f

A METHOD FOR DETERMINING ASPERITY PARAMETERS PRODUCING SPECIFIC MAXIMUM GROUND MOTION

Materials and Methods The deformation within the process zone of a propagating fault can be modeled using an elastic approximation.

Implications of Stress-Drop Models of Earthquakes for the Inversion of Stress Drop from Seismic Observations

Earthquakes. Pt Reyes Station 1906

Lecture 20: Slow Slip Events and Stress Transfer. GEOS 655 Tectonic Geodesy Jeff Freymueller

Lab 9: Satellite Geodesy (35 points)

Depth variation of coseismic stress drop explains bimodal earthquake magnitude-frequency distribution

Quiz 6. 1) The measure of the time between two peaks of a sine wave is called the. A) period B) wavelength C) amplitude.

CONTENTS PREFACE. VII 1. INTRODUCTION VARIOUS TOPICS IN SEISMOLOGY TECTONICS PERTAINING TO EQ PREDICTION 5

The Pennsylvania State University. The Graduate School. College of Earth and Mineral Sciences

Challenges in earthquake physics and source imaging

What is an Earthquake?

Chapter 6: Earthquakes

Development of a Predictive Simulation System for Crustal Activities in and around Japan - II

4((F'~) 2) = ~ = (2)

Lecture 2: Deformation in the crust and the mantle. Read KK&V chapter 2.10

High Resolution Imaging of Fault Zone Properties

The 2016, October 26, Central Italy Earthquake Origin Time 17:10:36 UTC, M L(ISNet) =5.3; M W(ISNet) =5.6

Overestimates of Earthquake Prediction Efficiency in a "Post-Prediction"

Transcription:

Mechanics of Earthquakes and Faulting Lecture 18, 16 Nov. 2017 www.geosc.psu.edu/courses/geosc508 Earthquake Magnitude and Moment Brune Stress Drop Seismic Spectra & Earthquake Scaling laws Scaling and Self-Similarity of Earthquake Rupture Implications for Rupture Dynamics and the Mode of Rupture Propagation

Thermo-mechanics of faulting San Andreas fault strength, heat flow. Consider: W f = τ v q If τ ~ 100 MPa and v is ~ 30 mm/year, then q is: 1e8 (N /m 2 ) 3e-2 (m/3e7s) = 1e-2 (J/s m 2 ) ~ 100 mw/m2. Problem of finding very low strength materials. Relates to the very broad question of the state of stress in the lithosphere? Byerlee s Law, Rangley experiments, Bore hole stress measurements, bore hole breakouts, earthquake focal mechanisms. Seismic stress drop vs. fault strength.

Fault Strength, State of Stress in the Lithosphere, and Earthquake Physics

Thermo-mechanics of faulting Fault strength, heat flow. Average Shear Stress Average slip velocity Consider shear heating: W f = τ v q If τ ~ 100 MPa and v is ~ 30 mm/year, then q is: 1e8 (N /m 2 ) 3e-2 (m/3e7s) = 1e-1 (J/s m 2 ) 100 mw/m 2

Fault Strength and State of Stress Data from Lachenbruch and Sass, 1980 Heat flow Stress orientations S A F e.g. Townend & Zoback, 2004;; Hickman & Zoback, 2004

Data from Lachenbruch and Sass, 1980 Fault Strength and State of Stress Heat flow Stress orientations Have been used to imply that the SAF is weak, µ 0.1. Inferred stress directions S A F σ 1 σ 1 S A F Predicted Observed e.g. Townend & Zoback, 2004;; Hickman & Zoback, 2004

SAFOD The San Andreas Fault Observatory at Depth Is the San Andreas anomalously weak?

SAF - Geology Based on Zoback et al., EOS, 2010

Frictional Strength, SAFOD Phase III Core Carpenter, Marone, and Saffer, Nature Geoscience, 2011 Carpenter, Saffer and Marone, Geology, 2012

Weak Fault in a Strong Crust Carpenter, Saffer, and Marone. Geology, 2012

Seismic Spectra & Earthquake Scaling laws. Aki, Scaling law of seismic spectrum, JGR, 72, 1217-1231, 1967. Hanks, b Values and ω -γ seismic source models: implications for tectonic stress variations along active crustal fault zones and the estimation of high-frequency strong ground motion, JGR, 84, 2235-2242, 1979. Scaling and Self-Similarity of Earthquake Rupture: Implications for Rupture Dynamics and the Mode of Rupture Propagation 0 Self-similar: Are small earthquakes the same as large ones? Do small ones become large ones or are large eq s different from the start? 1 Geometric self-similarity: aspect ratio of rupture area 2 Physical self-similarity: stress drop, seismic strain, scaling of slip with rupture dimension 3 Observation of constant b-value over a wide range of inferred source dimension. 4 Same physical processes operate during shear rupture of very small (lab scale, mining induced seismicity) and very large earthquakes? 5 Expectation of scaling break if rupture physics/dynamics change in at a critical size (or slip velocity, etc.). Shimazaki result. (Fig. 4.12). Length-Moment scaling and transition at L 60km (Romanowicz, 1992; Scholz, 1994). 6 Gutenberg-Richter frequency-magnitude scaling, b-values. 7 G-R scaling, b-value data. Single-fault versus fault population. G-R versus characteristic earthquake model. 8 Crack vs. slip-pulse models

Earthquake Source Properties, Spectra, Scaling, Self-similarity Displacement and acceleration source spectra. Spectra: zero-frequency intercept (M o ), corner frequency (ω o or f c ), high frequency decay (ω γ ), maximum (observed, emitted) frequency f max ω -n ω-square model, ω -2 ω-cube model, ω -3 log u at R Far-field body-wave spectra and relation to source slip function log freq. (ω) Displacement waveform for P & S waves: In general, very complex. Ω(x, t) and Ω(ω) depend on slip function, azimuth to observer and relative importance of nucleation and stopping phases

Scaling and Self-Similarity Are small earthquakes the same as large ones? 1 Geometric self-similarity: rupture aspect ratio 2 Physical self-similarity: stress drop, seismic strain, scaling of slip with rupture dimension Circular ruptures (small) Hanks, 1977 Abercrombie & Leary, 1993

Earthquake Source Properties, Spectra, Scaling, Self-similarity ω -3 log u at R log freq. (ω) ω-cube model, ω -3 Similarity condition M o α L 3 ω o α L -1 Ω(0) α ω o -3 This defines a scaling law. Spectral curves differ by a constant factor at a given period (e.g., 20 s), but they have the same high-freq. asymptote This behavior is expected when the nucleation phase is responsible for the high-freq. asymptote --but consider problem of time domain implication for amplitude (M b decreases with M o )

Seismic Source Spectra. Saturation occurs for large events, particularly saturation of M s (T=20 s) Corner frequency, Brune Stress drop. Aki, 1967

Earthquake Source Properties, Spectra, Scaling, Self-similarity ω -2 log u at R ω-square model, ω -2 Two possible explanations log freq. (ω) 1)!Similarity condition (not-similarity) M o α L 2 ω o α L -1 Ω(0) α ω o -2 2) Have similarity condition in terms of nucleation, but high-freq. asymptote is produced by stopping phase if rupture stops very abruptly

Earthquake Source Properties, Spectra, Scaling, Self-similarity Displacement and acceleration source spectra. Spectra: zero-frequency intercept (M o ), corner frequency (ω o or f c ), high frequency decay (ω γ ), maximum (observed, emitted) frequency f max f max log u at R ω -n log a at R log freq. (ω) log freq. (ω) Aki, Scaling law of seismic spectrum, JGR, 72, 1217-1231, 1967. Hanks, b Values and ω -γ seismic source models: implications for tectonic stress variations along active crustal fault zones and the estimation of high-frequency strong ground motion, JGR, 84, 2235-2242, 1979.

Earthquake Source Properties, Spectra, Scaling, Self-similarity Source spectra for two events of equal stress drop: omega cube model Large and Small Eq L log u at R L ω -3 S S f max log freq. (ω) High-freq. spectral properties: produced by rupture growth, represent nucleation and enlargement log a at R L S log freq. (ω)

Source spectra for two events of equal stress drop: omega square model Large and Small Eq L log u at R L ω -2 S S L f max log freq. (ω) High-freq. spectral properties: produced by rupture growth, represent nucleation and enlargement log a at R L S S f max log freq. (ω)

Earthquake Source Properties, Spectra, Scaling, Self-similarity Relation between source (a) displacement (b) velocity (c) acceleration history and asymptotic behavior of spectrum