MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Similar documents
Bonding and IMF practice test MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

2) Of the following substances, only has London dispersion forces as its only intermolecular force.

1051-3rd Chem Exam_ (A)

1051-3rd Chem Exam_ (B)

1051-3rd Chem Exam_ (C)

PLEASE DO NOT MARK ON THE EXAM. ALL ANSWERS SHOULD BE INDICATED ON THE ANSWER SHEET. c) SeF 4

CHEM 1211K Test IV. 3) The phase diagram of a substance is given above. This substance is a at 25 o C and 1.0 atm.

CHM2045 F13--Exam # MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Ionic and Covalent Bonding

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

General Chemistry Multiple Choice Questions Chapter 5

Multiple Choice. Multiple Choice

Covalent Bonding. In nature, only the noble gas elements exist as uncombined atoms. All other elements need to lose or gain electrons

Liquids & Solids. Mr. Hollister Holliday Legacy High School Regular & Honors Chemistry

The Liquid and Solid States

Exam Accelerated Chemistry Study Sheet Chap12 Solids/Liquids/Intermolecular Forces

Bonding. Honors Chemistry 412 Chapter 6

CHEMISTRY 102B Hour Exam III. Dr. D. DeCoste T.A. Show all of your work and provide complete answers to questions 16 and (45 pts.

a) ion-ion attractions b) London dispersion forces c) hydrogen bonding forces d) dipole-dipole attractions

Question 2 Identify the phase transition that occurs when CO 2 solid turns to CO 2 gas as it is heated.

Chem 102 Exam #1--Winter, 2006

Unit 1 Module 1 Forces of Attraction page 1 of 10 Various forces of attraction between molecules

Helpful Hints Lewis Structures Octet Rule For Lewis structures of covalent compounds least electronegative

AP CHEMISTRY CHAPTERS 5 & 6 Problem Set #4. (Questions 1-13) Choose the letter that best answers the question or completes the statement.

Name Unit Three MC Practice March 15, 2017

1. Choose the CORRECT abbreviated electron configuration for copper. a. [Ar] 4s 1 3d 10 b. [Ar] 4s 1 3d 8 c. [Ar] 4s 2 3d 9 d.

PHASE CHANGES. * melting * boiling * sublimation. * freezing * condensation * deposition. vs.

McCord CH301 Exam 3 Fall 2016

Chapter 6 PRETEST: Chemical Bonding

Liquids, Solids and Phase Changes

Intermolecular forces Liquids and Solids

The Liquid and Solid States

Chem 1210 Final Spring points Dr. Luther Giddings

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

MOLECULAR ORBITAL DIAGRAM KEY

Chem Midterm 3 April 23, 2009

compared to gases. They are incompressible. Their density doesn t change with temperature. These similarities are due

Valence Bond Theory - Description

Test bank for Chemistry The Central Science 10th Edition by Brown, LeMay, Bursten

Electrons and Molecular Forces

Unit Six --- Ionic and Covalent Bonds

Chapter 11. Liquids and Intermolecular Forces

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Form J. Test #4 Last Name First Name Zumdahl, Chapters 8 and 9 November 23, 2004

CHM151 Quiz Pts Fall 2013 Name: Due at time of final exam. Provide explanations for your answers.

Chapter 7. Chemical Bonding I: Basic Concepts

Ch 6 Chemical Bonding

Instant download Test bank for Chemistry The Central Science 10th Edition by Brown, LeMay, Bursten CLICK HERE

Chapter 9 Molecular Geometry. Lewis Theory-VSEPR Valence Bond Theory Molecular Orbital Theory

Multiple Choice Identify the letter of the choice that best completes the statement or answers the question.

1) A) 18 B) 0.55 C) 1.8 D) 5.5 E) 55 2) A) 59 B) 2.4 C) 1.8

Lecture Presentation. Chapter 11. Liquids and Intermolecular Forces. John D. Bookstaver St. Charles Community College Cottleville, MO

Houston Community College System. Chemistry EXAM # 3A Sample

Periodic Trends. Homework: Lewis Theory. Elements of his theory:

Chapter 11 Intermolecular Forces, Liquids, and Solids. Intermolecular Forces

Chapters and 7.4 plus 8.1 and 8.3-5: Bonding, Solids, VSEPR, and Polarity

Molecular Geometry and intermolecular forces. Unit 4 Chapter 9 and 11.2

1. There are paired and unpaired electrons in the Lewis symbol for a phosphorus atom. a. 4, 2 b. 2, 4 c. 2, 3 d. 4, 3 e. 0, 3

Chapter 7 Chemical Bonding and Molecular Structure

Chapter 11. Kinetic Molecular Theory. Attractive Forces

- intermolecular forces forces that exist between molecules

Chapter 10 Molecular Geometry and Chemical Bonding Theory. Copyright Cengage Learning. All rights reserved. 10 1

Chapter 10: Liquids, Solids, and Phase Changes

Adapted from CHM 130 Maricopa County, AZ Molecular Geometry and Lewis Dot Formulas Introduction

Atoms have the ability to do two things in order to become isoelectronic with a Noble Gas.

CHEMISTRY 110 EXAM 2 Feb 25, 2013 FORM A

16. NO 3, 5 + 3(6) + 1 = 24 e. 22. HCN, = 10 valence electrons

PROPERTIES OF SOLIDS SCH4U1

IB Chemistry 11 Kahoot! Review Q s Bonding

b1. Give the Lewis dot symbol associated with elemental magnesium b2. Give the Lewis dot symbol associated with the magnesium ion.

Unit 9: CHEMICAL BONDING

CHAPTER TEN MOLECULAR GEOMETRY MOLECULAR GEOMETRY V S E P R CHEMICAL BONDING II: MOLECULAR GEOMETRY AND HYBRIDIZATION OF ATOMIC ORBITALS

Please pass in only this completed answer sheet on the day of the test. LATE SUBMISSIONS WILL NOT BE ACCEPTED

Why does more NaCl dissolve in 100 g of water than in 100 g of gasoline? Chapter 10

Chapter 13: Phenomena

States of Matter. The Solid State. Particles are tightly packed, very close together (strong cohesive forces) Low kinetic energy (energy of motion)

CHEMISTRY 101 Hour Exam III. Dr. D. DeCoste T.A (30 pts.) 16 (12 pts.) 17 (18 pts.) Total (60 pts)

Unit Five: Intermolecular Forces MC Question Practice April 14, 2017

Questions 1-2 Consider the atoms of the following elements. Assume that the atoms are in the ground state. a. S b. Ca c. Ga d. Sb e.

Covalent Bonding. In nature, only the noble gas elements exist as uncombined atoms. All other elements need to lose or gain electrons

1) Based on the octet rule, magnesium most likely forms a ion. A) Mg- B) Mg6+ C) Mg2+ D) Mg6- E) Mg2-

Unit 9: CHEMICAL BONDING

Chem 124 Exam 1 Spring 2016 Version 1 Name

Bonding. Polar Vs. Nonpolar Covalent Bonds. Ionic or Covalent? Identifying Bond Types. Solutions + -

Hybridisation of Atomic Orbitals

Chapter 10 Liquids, Solids, and Intermolecular Forces

London Dispersion Forces (LDFs) Intermolecular Forces Attractions BETWEEN molecules. London Dispersion Forces (LDFs) London Dispersion Forces (LDFs)

Chapter 11: Liquids, Solids, and Intermolecular Forces. Mrs. Brayfield

51. Pi bonding occurs in each of the following species EXCEPT (A) CO 2 (B) C 2 H 4 (C) CN (D) C 6 H 6 (E) CH 4

Chapter 14. Liquids and Solids

Chemical bonding is the combining of elements to form new substances.

CHEMISTRY 101 Hour Exam III. Dr. D. DeCoste T.A (30 pts.) 16 (12 pts.) 17 (18 pts.) Total (60 pts)

Chemical Bonding. 5. _c Atoms with a strong attraction for electrons they share with another atom exhibit

Name (printed): Signature:

Chapter 10. Dipole Moments. Intermolecular Forces (IMF) Polar Bonds and Polar Molecules. Polar or Nonpolar Molecules?

Chemistry 3.4 AS WORKBOOK. Working to Excellence Working to Excellence

GHW#3 Louisiana Tech University, Chemistry 281. POGIL exercise on Chapter 2. Covalent Bonding: VSEPR, VB and MO Theories. How and Why?

CHEMISTRY HONORS LEOCE Study Guide

Chemical Bonding AP Chemistry Ms. Grobsky

AP Chemistry- Practice Bonding Questions for Exam

Transcription:

Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The F-B-F bond angle in the BF3 molecule is. A) 109.5e B) 120e C) 180e D) 90e E) 60e 2) The molecular geometry of the BCl3 molecule is, and this molecule is. A) trigonal pyramidal, polar B) trigonal planar, nonpolar C) trigonal pyramidal, nonpolar D) trigonal bipyramidal, polar E) trigonal planar, polar 3) Viscosity is. A) the "skin" on a liquid surface caused by intermolecular attraction B) the resistance to flow C) unaffected by temperature D) the same as density E) inversely proportional to molar mass 4) The London dispersion force is the attractive force between. A) two permanent dipoles B) an ion and a permanent dipole C) two molecules with hydrogen bonded to an oxygen atom D) any of the above E) an instantaneous dipole and an induced dipole 5) hybrid orbitals are used for bonding by Xe in the XeF4 molecule. A) sp B) sp2 C) sp3d D) sp3d2 E) sp3 6) Elemental iodine (I2) is a solid at room temperature. What is the major attractive force that exists among different I2 molecules in the solid? A) dipole-dipole attractions B) covalent-ionic interactions C) dipole-dipole rejections D) ionic-dipole interactions E) London dispersion forces 7) Of the molecules below, only is polar. A) AsH3 B) SbF5 C) CH4 D) SF6 E) I2 1

8) Of the following, is an exothermic process. A) melting B) subliming C) boiling D) freezing E) All of the above are exothermic. 9) A volatile liquid is one that. A) is highly viscous B) is highly cohesive C) is highly hydrogen-bonded D) is highly flammable E) readily evaporates 10) The direct conversion of a solid to a gas is called. A) fusion B) sublimation C) condensation D) boiling E) vaporization 11) There are unpaired electrons in the Lewis symbol for an oxygen atom. A) 1 B) 0 C) 4 D) 3 E) 2 12) Of the following substances, has the highest boiling point. A) Kr B) H2O C) NH3 D) CO2 E) CH4 13) A nonpolar bond will form between two atoms of electronegativity. A) different, different B) identical, equal C) identical, different D) different, opposite E) similar, different 14) A double bond consists of pairs of electrons shared between two atoms. A) 1 B) 2 C) 3 D) 4 E) 6 15) In the overall process of hybrid orbital formation, the purpose of promoting one or more electrons is to. A) increase the number of unpaired electrons B) increase the number of atomic orbitals C) increase the number of hybrid orbitals D) make sure that every atomic orbital is occupied prior to hybridization E) make sure that all of the electrons in atomic orbitals are unpaired prior to hybridization 2

16) When NaCl dissolves in water, aqueous Na+ and Cl- ions result. The force of attraction that exists between Na+ and H2O is called a(n) interaction. A) London dispersion force B) dipole-dipole C) ion-dipole D) ion-ion E) hydrogen bonding 17) Hydrogen bonding is a special case of. A) ion-dipole attraction B) London-dispersion forces C) dipole-dipole attractions D) none of the above E) ion-ion interactions 18) The intermolecular force(s) responsible for the fact that CH4 has the lowest boiling point in the set CH4, SiH4, GeH4, SnH4 is/are. A) mainly London-dispersion forces but also dipole-dipole interactions B) mainly hydrogen bonding but also dipole-dipole interactions C) London dispersion forces D) dipole-dipole interactions E) hydrogen bonding 19) Of the molecules below, only is nonpolar. A) CO2 B) NH3 C) H2O D) TeCl2 E) HCl 20) A covalent bond is the longest. A) triple B) single C) double D) They are all the same length. E) strong 21) A gas is and assumes of its container whereas a liquid is and assumes of its container. A) compressible, the volume and shape, compressible, the volume B) compressible, the shape, not compressible, the volume and shape C) condensed, the volume and shape, condensed, the volume and shape D) condensed, the shape, compressible, the volume and shape E) compressible, the volume and shape, not compressible, the shape of a portion 3

22) The Lewis structure of AsH3 shows nonbonding electron pair(s) on As. A) 0 B) 1 C) 2 D) 3 E) This cannot be determined from the data given. 23) Crystalline solids. A) exist only at high temperatures B) have their particles arranged randomly C) have highly ordered structures D) are usually very soft E) exist only at very low temperatures 24) Bond enthalpy is. A) sometimes positive, sometimes negative B) always negative C) always zero D) always positive E) unpredictable 25) A typical triple bond. A) consists of two s bonds and one p bond B) consists of three shared electrons C) consists of one s bond and two p bonds D) is longer than a single bond E) consists of six shared electron pairs 26) The ability of an atom in a molecule to attract electrons is best quantified by the. A) electron change-to-mass ratio B) diamagnetism C) first ionization potential D) paramagnetism E) electronegativity 27) The blending of one s atomic orbital and two p atomic orbitals produces. A) three sp2 hybrid orbitals B) two sp2 hybrid orbitals C) three sp3 hybrid orbitals D) two sp3 hybrid orbitals E) three sp hybrid orbitals 4

28) Which of the following is not a type of solid? A) metallic B) ionic C) supercritical D) covalent-network E) molecular 29) Of the following substances, only has London dispersion forces as its only intermolecular force. A) CH4 B) CH3OH C) NH3 D) H2S E) HCl 30) Together, liquids and solids constitute phases of matter. A) all of the B) the fluid C) the compressible D) the condensed E) the disordered 31) Of the atoms below, is the most electronegative. A) F B) Br C) N D) O E) Cl 32) According to VSEPR theory, if there are four electron domains in the valence shell of an atom, they will be arranged in a(n) geometry. A) octahedral B) trigonal bipyramidal C) tetrahedral D) trigonal planar E) linear 33) According to VSEPR theory, if there are five electron domains in the valence shell of an atom, they will be arranged in a(n) geometry. A) linear B) trigonal planar C) octahedral D) trigonal bipyramidal E) tetrahedral 34) For resonance forms of a molecule or ion,. A) one always corresponds to the observed structure B) all the resonance structures are observed in various proportions C) the same atoms need not be bonded to each other in all resonance forms D) there cannot be more than two resonance structures for a given species E) the observed structure is an average of the resonance forms 5

35) Some things take longer to cook at high altitudes than at low altitudes because. A) natural gas flames don't burn as hot at high altitudes B) heat isn't conducted as well in low density air C) water boils at a higher temperature at high altitude than at low altitude D) water boils at a lower temperature at high altitude than at low altitude E) there is a higher moisture content in the air at high altitude 36) What intermolecular force is responsible for the fact that ice is less dense than liquid water? A) dipole-dipole forces B) ionic bonding C) ion-dipole forces D) hydrogen bonding E) London dispersion forces 37) The vapor pressure of any substance at its normal boiling point is A) 1 atm B) equal to atmospheric pressure C) 1 torr D) equal to the vapor pressure of water E) 1 Pa 38) Heat of sublimation can be approximated by adding together and. A) heat of freezing (solidification), heat of vaporization B) heat of fusion, heat of vaporization C) heat of fusion, heat of condensation D) heat of deposition, heat of vaporization E) heat of freezing (solidification), heat of condensation 39) In general, the vapor pressure of a substance increases as increases. A) molecular weight B) temperature C) viscosity D) surface tension E) hydrogen bonding 40) The formal charge on carbon in the molecule below is. A) +1 B) +3 C) -1 D) 0 E) +2 41) In order to produce sp3 hybrid orbitals, s atomic orbital(s) and p atomic orbital(s) must be mixed. A) two, three B) one, two C) two, two D) one, one E) one, three 6

Answer Key Testname: 1411-4F.TST MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) B 2) B 3) B 4) E 5) D 6) E 7) A 8) D 9) E 10) B 11) E 12) B 13) B 14) B 15) A 16) C 17) C 18) C 19) A 20) B 21) E 22) B 23) C 24) D 25) C 26) E 27) A 28) C 29) A 30) D 31) A 32) C 33) D 34) E 35) D 36) D 37) A 38) B 39) B 40) D 41) E 1