Summary II: Modulation and Demodulation

Similar documents
a) Find the compact (i.e. smallest) basis set required to ensure sufficient statistics.

Signal Design for Band-Limited Channels

Modulation & Coding for the Gaussian Channel

Square Root Raised Cosine Filter

that efficiently utilizes the total available channel bandwidth W.

Digital Band-pass Modulation PROF. MICHAEL TSAI 2011/11/10

ρ = sin(2π ft) 2π ft To find the minimum value of the correlation, we set the derivative of ρ with respect to f equal to zero.

Es e j4φ +4N n. 16 KE s /N 0. σ 2ˆφ4 1 γ s. p(φ e )= exp 1 ( 2πσ φ b cos N 2 φ e 0

Summary: ISI. No ISI condition in time. II Nyquist theorem. Ideal low pass filter. Raised cosine filters. TX filters

Digital Communications

This examination consists of 11 pages. Please check that you have a complete copy. Time: 2.5 hrs INSTRUCTIONS

EE6604 Personal & Mobile Communications. Week 15. OFDM on AWGN and ISI Channels

Solutions to Selected Problems

EE4061 Communication Systems

Projects in Wireless Communication Lecture 1

EE 661: Modulation Theory Solutions to Homework 6

This examination consists of 10 pages. Please check that you have a complete copy. Time: 2.5 hrs INSTRUCTIONS

Summary: SER formulation. Binary antipodal constellation. Generic binary constellation. Constellation gain. 2D constellations

GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL OF ELECTRICAL AND COMPUTER ENGINEERING Final Examination - Fall 2015 EE 4601: Communication Systems

Digital Transmission Methods S

EE5713 : Advanced Digital Communications

A First Course in Digital Communications

A Simple Example Binary Hypothesis Testing Optimal Receiver Frontend M-ary Signal Sets Message Sequences. possible signals has been transmitted.

Principles of Communications

Analog Electronics 2 ICS905

Consider a 2-D constellation, suppose that basis signals =cosine and sine. Each constellation symbol corresponds to a vector with two real components

8 PAM BER/SER Monte Carlo Simulation

Digital Communications

Computing Probability of Symbol Error

BASICS OF DETECTION AND ESTIMATION THEORY

ECE6604 PERSONAL & MOBILE COMMUNICATIONS. Week 3. Flat Fading Channels Envelope Distribution Autocorrelation of a Random Process

Digital Communications: A Discrete-Time Approach M. Rice. Errata. Page xiii, first paragraph, bare witness should be bear witness

EE4512 Analog and Digital Communications Chapter 4. Chapter 4 Receiver Design

CHAPTER 14. Based on the info about the scattering function we know that the multipath spread is T m =1ms, and the Doppler spread is B d =0.2 Hz.

Performance of small signal sets

Direct-Sequence Spread-Spectrum

The Performance of Quaternary Amplitude Modulation with Quaternary Spreading in the Presence of Interfering Signals

Digital Modulation 1

EE4304 C-term 2007: Lecture 17 Supplemental Slides

A Family of Nyquist Filters Based on Generalized Raised-Cosine Spectra

3.9 Diversity Equalization Multiple Received Signals and the RAKE Infinite-length MMSE Equalization Structures

Advanced Digital Communications

Data Detection for Controlled ISI. h(nt) = 1 for n=0,1 and zero otherwise.

Example: Bipolar NRZ (non-return-to-zero) signaling

Principles of Communications Lecture 8: Baseband Communication Systems. Chih-Wei Liu 劉志尉 National Chiao Tung University

MITOCW ocw-6-451_ feb k_512kb-mp4

Lecture 15: Thu Feb 28, 2019

CHANNEL CAPACITY CALCULATIONS FOR M ARY N DIMENSIONAL SIGNAL SETS

Mapper & De-Mapper System Document

Weiyao Lin. Shanghai Jiao Tong University. Chapter 5: Digital Transmission through Baseband slchannels Textbook: Ch

Contents Equalization 148

392D: Coding for the AWGN Channel Wednesday, January 24, 2007 Stanford, Winter 2007 Handout #6. Problem Set 2 Solutions

Imperfect Sampling Moments and Average SINR

5 Analog carrier modulation with noise

QPSK and OQPSK in Frequency Nonselective Fading

Carrier frequency estimation. ELEC-E5410 Signal processing for communications

Electrical Engineering Written PhD Qualifier Exam Spring 2014

arxiv:cs/ v1 [cs.it] 11 Sep 2006

Power Spectral Density of Digital Modulation Schemes

A Hilbert Space for Random Processes

LECTURE 16 AND 17. Digital signaling on frequency selective fading channels. Notes Prepared by: Abhishek Sood

EE6604 Personal & Mobile Communications. Week 12a. Power Spectrum of Digitally Modulated Signals

Parameter Estimation

Revision of Lecture 4

EE401: Advanced Communication Theory

FBMC/OQAM transceivers for 5G mobile communication systems. François Rottenberg

Memo of J. G. Proakis and M Salehi, Digital Communications, 5th ed. New York: McGraw-Hill, Chenggao HAN

Kevin Buckley a i. communication. information source. modulator. encoder. channel. encoder. information. demodulator decoder. C k.

FREE Space Optical (FSO) communications has been

PSK bit mappings with good minimax error probability

Chapter 2 Signal Processing at Receivers: Detection Theory

II - Baseband pulse transmission

SIGNAL SPACE CONCEPTS

Outline Digital Communications. Lecture 02 Signal-Space Representation. Energy Signals. MMSE Approximation. Pierluigi SALVO ROSSI

EE456 Digital Communications

Digital Baseband Systems. Reference: Digital Communications John G. Proakis

Communication Theory Summary of Important Definitions and Results

2016 Spring: The Final Exam of Digital Communications

Mobile Communications (KECE425) Lecture Note Prof. Young-Chai Ko

Lecture 5b: Line Codes

Pulse Shaping and ISI (Proakis: chapter 10.1, 10.3) EEE3012 Spring 2018

ELEC546 Review of Information Theory

Review of Doppler Spread The response to exp[2πift] is ĥ(f, t) exp[2πift]. ĥ(f, t) = β j exp[ 2πifτ j (t)] = exp[2πid j t 2πifτ o j ]

Lecture 1: Channel Equalization 1 Advanced Digital Communications (EQ2410) 1. Overview. Ming Xiao CommTh/EES/KTH

RADIO SYSTEMS ETIN15. Lecture no: Equalization. Ove Edfors, Department of Electrical and Information Technology

Detecting Parametric Signals in Noise Having Exactly Known Pdf/Pmf

Estimation of the Capacity of Multipath Infrared Channels

But by their second edition in 1994 [6] they were obliged to revise this passage as follows:

A Design of High-Rate Space-Frequency Codes for MIMO-OFDM Systems

5. Pilot Aided Modulations. In flat fading, if we have a good channel estimate of the complex gain gt, ( ) then we can perform coherent detection.

Carrier and Timing Synchronization in Digital Modems

Performance Analysis of Spread Spectrum CDMA systems

ECE 564/645 - Digital Communications, Spring 2018 Homework #2 Due: March 19 (In Lecture)

Method for analytically calculating BER (bit error rate) in presence of non-linearity. Gaurav Malhotra Xilinx

Performance of Coherent Binary Phase-Shift Keying (BPSK) with Costas-Loop Tracking in the Presence of Interference

Signal space representations of communication signals, optimal detection and error probability

NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY DEPARTMENT OF ELECTRONICS AND TELECOMMUNICATIONS

Diversity Performance of a Practical Non-Coherent Detect-and-Forward Receiver

Revision of Lecture Eight

ECS 332: Principles of Communications 2012/1. HW 4 Due: Sep 7

Transcription:

Summary II: Modulation and Demodulation Instructor : Jun Chen Department of Electrical and Computer Engineering, McMaster University Room: ITB A1, ext. 0163 Email: junchen@mail.ece.mcmaster.ca Website: http://www.ece.mcmaster.ca/ junchen/

Passband and Baseband Signals Definition 1. A signal is said to be baseband if S(f) = 0 for f > W for some W > 0. Definition. A signal is said to be passband if S(f) = 0 for f±f c > W for some f c > W > 0. 1. Time-domain representation of a passband signal. Any passband signal can be written as s p (t) = s c (t)cos(πf c t) s s (t)sin(πf c t), where s c (t) and s s (t) are real-valued signals. Usually, the waveforms s c (t) and s s (t) are referred to as the in-phase (or I) component and the quadrature (or Q) component of the passband signal s p (t), respectively.

. Time-domain representation of a baseband signal. by The complex envelope or complex baseband signal of s p (t) is represented s(t) = s c (t)+js s (t) 3. Time-domain relationship between passband and complex baseband. s p (t) = Re ( s(t)e jπf ct ) 4. Frequency-domain relationship between passband and complex

baseband. S(f) = S + p (f +f c ) S p (f) = S(f f c)+s ( f f c ) 5. Properties. Property 1. The I-channel is orthogonal to the Q-channel; i.e., < x c (t),x s (t) >= 0, where x c (t) = s c (t)cos(πf c t) and x s (t) = s s (t)sin(πf c t). Property. < u p (t),v p (t) >=< u c (t),v c (t) > + < u s (t),v s (t) >= Re ( u(t),v(t) ). Property 3. The energy of the passband signal is equal to that of its equivalent baseband signal; i.e., s p (t) = s(t).

M-ary PAM Constellation Definition 3. M-ary PAM constellation is defined as where M = b. A = {± (k 1)d } M/ k=1 Suppose that each constellation point is equally likely, then The mean of this constellation is m(a) = 1 M M/ k=1 ( ± (k 1)d ) = 0.

The average anergy E s is given by E s = 1 M = M = d M M/ k=1 M/ k=1 4 ( ( (k 1)d ( ) (k 1)d = d M M/ k=1 = d (M 1), 1 k 4 ) ) + ( (k 1)d) M/ k=1 k + M/ k=1 M/ k=1 1 ( 4k 4k +1 )

where we have used the fact that N k = k=1 N k = k=1 N(N +1)(N +1) 6 N(N +1) The minimum distance between any two distinct points is d min (A) = min = d a,a A,a a a a

PAM Modulation The baseband transmitted waveform for linear PAM is u(t) = n b[n]g TX (t nt), where each symbol b n is the PAM constellation point, the modulating pulse g TX (t) is a fixed baseband real waveform, T is termed the symbol interval and 1/T the symbol rate. Then, passband waveform is u p (t) = Re ( u(t)e jπf ct ) = u(t)cos(πf c t).

Square M-ary QAM Constellation Definition 4. Square M = b -ary QAM constellation is defined as A = {a+jb : a,b M arypamconstellation}. Suppose that each constellation point is equally likely, then The mean of this constellation is m(a) = 1 M = M M a,b M PAM a M PAM ( ) a+jb a+ j M M b M PAM b = 0

The average anergy is given by E s = 1 M = 1 M = M M a,b M PAM a,b M PAM a M PAM a+jb (a +b ) = 1 M a + b M PAM a,b M PAM b a + = d (M 1) 6 The minimum distance between any two distinct points is d min (A) = min = d a,a A,a a a a a,b M PAM b

QAM Modulation The baseband transmitted waveform for linear QAM is u(t) = n b[n]g TX (t nt), where each symbol b[n] is the M-ary QAM constellation point, the modulating pulse g TX (t) is a fixed real baseband waveform, T is termed the symbol interval and 1/T the symbol rate. Then, the passband waveform is u p (t) = Re ( u(t)e jπf ct ) = u c (t)cos(πf c t) u s (t)sin(πf c t), whereu c (t) = n Re(b n)g TX (t nt) andu s (t) = n Im(b n)g TX (t nt).

The Nyquist criterion for ISI-Free Let g RX (t) be the receive filter and x(t) = g TX (t) g RX (t), i.e., x(t) = g TX (τ)g RX (t τ)dτ Then, the received filtered waveform using g RX (t) in the noise-free case is given by z(t) = u(t) g RX (t) = u(τ)g RX (t τ)dτ = n b[n]x(t nt). Definition 5. The waveform x(t) satisfying x[kt] = δ[k] is said to be ideal Nyquist with symbol interval T.

Therefore, when x(t) is the ideal Nyquist pulse, z[kt] = b[k] and thus, there is no itersymbol interference (ISI). Theorem 1. The x(t) is the ideal Nyquist with symbol interval T if and only if k= X(f k/t) = T for all f Two typical ideal Nyquist pulses are as follows: Minimum bandwidth Nyquist pulse: In frequency-domain, X(f) = { 1, f 1 T, 0, otherwise.

In time-domain, x(t) = sinc ( t) T Raised cosine pulse: In frequency-domain, X(f) = 1, ( f 1 α T 1 sin ( ) ) ( f 1 T )πt 1 α α, T T, 0, f > 1+α T. f 1+α T, In time-domain, x(t) = sinc ( t T ) cos( πα T ) 1 ( αt T bandwidth, typically chosen in the range of 0 α < 1. ), where α is the fractional excess

Choice of the ISI-Free Modulation Pulse Choose the ideal Nyquist X(f) 0. Choose G TX (f) = X(f) and G RX (f) = G TX (f) In general, g TX (t) can be allowed to be complex. The following theorem is very important. Theorem. let g TX (t) be an L (R) function such that X(f) = G TX (f) satisfies the Nyquist criterion for the symbol interval T. Then, {g TX (t kt) : k Z} is a set of orthonormal functions. Conversely, if {g TX (t kt) : k Z} is a set of orthonormal functions, then, X(f) = G TX (f) satisfies the Nyquist criterion for the symbol interval T.

Detection of PAM Signals Consider a discrete-time baseband equivalent AWGN channel model: y = s+η, (1) where η is the Gaussian random variable with zero mean and variance σ, and s is independently and equally likely chosen from the M-ary PAM constellation. 1. Decision rule for the ML detector: ŝ = arg s A min y s () Notice that the M-ary PAM constellation can be represented by A = { ( ) k M 1 d} M 1 k=0. Let s = ( ) k M 1 d. Then, the optimization

problem () is equivalent to the following optimization problem: ˆk = arg 0 k M 1 min y ( k M 1 ) d (M 1)d = arg 0 k M 1 min y + kd = arg 0 k M 1 min 0, M 1, = y d + (M 1) y d < (M 1) y d > (M 1) k +0.5, 0.5, y d + (M 1), y d + (M 1) y d + (M 1) < y d + (M 1) +0.5, y d + (M 1) +1, y d + (M 1) +0.5 y d + (M 1) < y d + (M 1) where notation x denote the maximum integer not exceeding x. Therefore, the optimal estimate is given by ŝ = (ˆk ) M 1 d. +1,

. Decision regions: The correct decision regions for detecting s k = ( ) k M 1 d using the ML receiver are given as follows: Γ k = {y : ( k M 1 Γ 0 = {y : y (M 1)d + d } for the left edge point Γ M 1 = {y : y (M 1)d d ) d d < y < ( k M 1 } for the right edge point ) d + d } for the kth inner point 3. Average symbol error probability: Note that the conditional probability density function of the received signal y given s = s k is the Gaussian distribution with mean s k and variance σ, i.e., f(y s k ) = 1 k ) πσ e (y s σ (3) Hence, the conditional probability of making correction decision, P c sk is

determined by P c sk = Γ k f(y s k )dy (4) In order to evaluate this integral, we consider the following three cases: (a) For the left edge point, the conditional probability of making correct decision on s = s 0 = (M 1)d is given by P c s0 = Γ 0 f(y s 0 )dy = (M 1)d + d ( 1 πσ e ) y+ (M 1)d σ dy = 1 Q ( d ) σ Thus, the conditional probability of making wrong decision on s = s 0 = (M 1)d, P e s0 is P e s0 = 1 P c s0 = Q ( d σ). (b) Similar to Case (a), for the right edge point, the conditional probability

of making correct decision on s = s M 1 = (M 1)d is given by P c sm 1 = (M 1)d d ( 1 πσ e ) y (M 1)d σ dy = 1 Q ( d ) σ Hence, P e sm 1 = 1 p c sm 1 = Q ( d σ). (c) For the kth inner point, the conditional probability of making correct decision on s = s k = k (M 1)d is given by P c sk = (M 1)d k + d k (M 1)d d = 1 1 π d ( 1 πσ e y+ (M 1)d e t dt 1 π ) k σ dy = 1 d π e t d d e t dt dt = 1 Q ( d ). σ Thus, the conditional probability of making wrong decision on s =

s k = k (M 1)d, P e sk is P e sk = 1 P c sk = Q ( d σ). Therefore, over all average symbol error probability, P e is defined as P e = M 1 k=0 π(k)p e sk, (5) where π(k) denotes the prior probability for transmitting s = s k. For equally likely transmission, π(k) = 1 M and thus, P e = M 1 k=0 π(k)p e sk = (M 1) M Q( d ). (6) σ Since the average energy for the M-ary PAM constellation per symbol is E s = (M 1)d 1, if we define signal to noise ratio (SNR) per symbol to be

1E s M 1 SNR s = E s, then, d = and as a result, the average symbol error σ probability P e given by equation (6) can be represented in terms of the SNR s by SNR s b P e = (M 1) M Q( d ) (M 1) ( = σ M Q 6SNR ) s. M 1 Similarly, if we define signal to noise ratio (SNR) per bit to be SNR b = = SNR s log M = E b, where E σ b = E s b, then, the average symbol error probability P e given by equation (6) can be represented in terms of the SNR b by P e = (M 1) M Q 6 log M SNR b. M 1

Detection of QAM Signals Consider a discrete-time baseband equivalent AWGN channel model: y = s+η, (7) where η is the circularly symmetrical complex Gaussian random variable with zero mean and variance σ, and s is independently and equally likely chosen from the square M-ary QAM constellation S. 1. Decision rule for the ML detector: ŝ = arg s S min y s (8) Let y = y re + jy im and s = s re + js im. Since y s = (yre s re ) +(y im s im ) and s re and s im are independent, the

optimization problem () is equivalent to the following two optimization problems: ŝ re = arg sre Amin y re s re (9) ŝ im = arg sim Amin y im s im, (10) where A denotes the M-ary PAM constellation. If we let s re = ( m M 1 ) d and sim = ( n ) M 1 d, where m,n = 0,1,,, M 1, then, taking advantage of the result from equation (11), we have ˆm = 0, M 1, d + ( M 1) M 1) y re y re d + (, y re yre d < M 1) ( yre d > ( M 1) d + ( M 1) M 1) + 1, y re d + ( + 0.5, 0.5, y re d + ( M 1) M 1) + 0.5 y re d + ( < y re d + ( M 1) < y re d + ( + 0.5, M 1) + 1,

ˆn = EE 4TM4 and 0, M 1, y imd < ( M 1)d + 0.5, y imd > ( M 1)d M 1) y im d + ( M 1), y im d + ( y im d + ( M 1) + 1, y im d + ( 0.5, M 1) M 1) y im d + ( < y im d + ( + 0.5, + 0.5 y im d + ( M 1) < y im d + ( M 1) + 1. M 1) Therefore, the optimal estimate of s is given by ŝ = ŝ re +jŝ im, where ŝ re = (ˆm M 1 ) d, ŝ im = (ˆn M 1 ) d.. Decision regions: The correct decision region for detecting s m,n = ( m M 1 ) ( d+j n M 1 ) d using the ML receiver is given as follows:

(a) For four corner points: Γ 0,0 = Γ 0 Γ 0 Γ M 1,0 = Γ M 1 Γ 0 Γ 0, M 1 = Γ 0 Γ M 1 Γ M 1, M 1 = Γ M 1 Γ M 1 where notation Γ k denotes the kth decision region for the kth PAM constellation point, which defined in (3), and notation X Y denotes a set X Y = {(x,y) : x X,y Y}

(b) For 4( M ) edge points: for 1 k M. (c) For ( M ) inner points: Γ 0,k = Γ 0 Γ k Γ k,0 = Γ k Γ 0 Γ M 1,k = Γ M 1 Γ k Γ k, M 1 = Γ k Γ M 1 for 1 m,n M. Γ m,n = Γ m Γ n 3. Average symbol error probability: Note that the conditional

probability density function of the received signal y given s = s m,n is the joint Gaussian distribution, f(y s m,n ) = 1 (yre sm) +(y im sn) πσ e σ (11) wheres m ands n denotetherealandimaginarypartsofs m,n, respectively. Hence, the conditional probability of making correction decision on the QAM symbol s m,n, P c sm,n is determined by P c sm,n = Γ m,n f(y s m,n )dy re dy im (1) The following three points are the key to evaluate the integral (1): Making correction decision on the QAM symbol s m,n is equivalent to

making correction decisions on both the real part PAM symbol s re,m and the imaginary part PAM symbol s im,n. For a given s = s m,n real part and the imaginary part of the complex received signal are independent, i.e., the conditional probability density function (11) can be rewritten as f(y s m,n ) = 1 re sre,m) πσ e (y σ 1 im s im,n ) πσ e (y σ = f(y re s re,m ) f(y im s im,n ) (13) The decision region Γ m,n is separable, i.e., Γ m,n = Γ m Γ n. Therefore, we have P c sm,n = P c sre,m P c sim,n. Now, we can make use of the result for the PAM constellation by considering the following three cases:

(a) For four corner points, P c sm,n = P c sre,m P c sim,n = ( 1 Q ( d ) ) σ (b) For 4( M ) edge points, P c sm,n = P c sre,m P c sim,n = ( 1 Q ( d ) ) (1 Q ( d ) ) σ σ (c) For ( M ) inner points, P c sm,n = P c sre,m P c sim,n = ( 1 Q ( d ) ) σ Therefore, over all average symbol probability of a correct decision, P c is

determined by P c = M 1 m=0 ( 4 = 1 M ( 1 Q ( d M 1 n=0 ( = 1 4 1 1 ) Q ( d M σ π(s m,n )P e sm,n ( 1 Q ( d ) ) +4( M ) (1 Q ( d ) ) σ σ ) ) +( M ) (1 Q ( d ) ) ) σ σ ) +4 (1 1 ) Q ( d ) M σ Hence, the average symbol error probability is given by ( P e = 1 P c = 4 1 1 ) Q ( d ) 4 (1 1 ) Q ( d ) M σ M σ (14)

Since the average energyfor the M-ary QAM constellation per symbol is E s = (M 1)d 6E 6, then, d = s M 1 and as a result, the average symbol error probability P e given by equation (14) can be represented in terms of the SNR s by P e = 4 (1 1 ( )Q 3SNR ) s M M 1 4 (1 1 M ) Q ( 3SNR s M 1 ). Similarly, if we define signal to noise ratio (SNR) per bit to be SNR b = = SNR s log M = E b, where E σ b = E s b, then, the average symbol error SNR s b probability P e given by equation (14) can be represented in terms of the SNR b by P e = 4 (1 1 )Q M 3 log M SNR b M 1 4 (1 1 ) Q M 3 log M SNR b M 1.

Union Bound Consider a discrete-time AWGN channel model: y = s+η, where η is the white Gaussian random vector with zero mean and variance per each real dimension being σ, and s is independently and equally likely chosen from a multi-dimensional constellation A = {a n } N n=1. Let Γ n is the correct decision region for a n with the ML detector. Then, the error probability P e is given by P e = N π(n)p e s=a n = N π(n)p ( y N Γ m s = a n ) n=1 n=1 m=1,m =n = N N π(n)p ( ) y Γ m s = a n. n=1 m=1,m =n

Since P ( y Γ m s = a n ) Q ( dm,n σ ), where dm,n = a m a n, we have P e N N n=1m=1,m =n π(n)q ( d m,n ). σ This upper bound is called the union bound for the ML detector. Example 1. Let A = { ( 1 0 ) ( 03 ) (,, 0 3 ) ( 1, 0 ) }. Then, the union bound of the ML receiver for this constellation is given by 5 ( 1 ) Q σ + 1 ( Q 3 ). σ

Nearest Neighbors Approximation ( dmin (A) σ ), the terms related to When the signal noise ratio is high, Q the minimum distance in the union bound are performance-dominant terms. For any a i A, Let us define the nearest neighbors set to be N(a i ) = {a : a Aand a a i = d min (A)} Let N dmin (i) denote the number of the nearest neighbors of a i. Sometimes, N dmin (i) is also called the kissing number of a i. The average nearest neighbors number, denoted by N dmin, is defined as N dmin = N π(i)n dmin (i). i=1

Therefore, the nearest neighbors approximation for the ML receiver is described by ( dmin (A) ) P e N dmin Q. σ Example. Consider the constellation defined in Example 1. Notice that d min (A) =. N(a 1 ) = {a,a 3,a 4 }, N(a ) = {a 1,a 3 } N(a 3 ) = {a 1,a,a 4 }, N(a 4 ) = {a 1,a 3 }. Hence, N dmin (1) = N dmin (3) = 3, N dmin () = N dmin (4) = and N dmin = 3+3++ 4 =.5. For this constellation, the ( nearest ) neighbors approximation for the ML receiver is given by P e.5q. 1 σ

Typical Examples Example 3. Find the mean, average anergy and minimum distance of the following constellations if each constellation point is equally likely: 1. Orthogonal constellation A = { Ee i } M i=1, where each e i is an M 1 column vector with i-th component being 1 and the other components being all zeros.. Biorthogonal constellation A = { Ee i, Ee i } M/ i=1, where each e i is an (M/) 1 row vector with i-th component being 1 and the other components being all zeros. 3. SimplexconstellationA = { Es i } M i=1, whereeachs i isan M 1column vector with i-th component being M 1 M and the other components being all 1 M.

Solutions: 1. The mean of A is given by m(a) = 1 M M i=1 Eei = E M (1,1,,1)T The average anergy of A is given by E(A) = 1 M M Ee i = E i=1 Since the distance between any two distinct constellation points is Ee i Ee k = E for i k, d min (A) = E.

. The mean of A is given by m(a) = 1 M ( M/ i=1 Eei + M/ ( ) Ee i ) i=1 = 0 The average anergy of A is E(A) = 1 M ( M/ i=1 Ee i + M/ i=1 Ee i ) ) = E Similarly, the distance between any two distinct constellation points is either E or E and thus d min (A) = E.

3. The mean of A is given by m(a) = 1 M M Esi i=1 = E( M 1 M (M 1) 1 1,,M M M (M 1) 1 M )T = 0 The average anergy of A is E(A) = 1 M = M Es i = E M i=1 (M 1)E M M i=1 ( ( M 1 M ) +(M 1) ( 1 M )) Since the distance between any two distinct constellation points is

Es i Es k = d min (A) = E. E ( M 1 M ( 1 M) ) = E for i k,