Chapter 11: Earthquakes Grade 6 Earth Science Mr. Norton
Table of Contents Chapter 10: Earthquakes Section 1: Forces Inside Earth Section 2: Features of Earthquakes Section 3: People and Earthquakes
Chapter 11: Earthquakes Section 1: Forces Inside the Earth Grade 6 Earth Science Mr. Norton
Forces Inside Earth Earthquake Causes The bending and breaking of wooden craft sticks are similar to how rocks bend and break. When a force is first applied to the stick, it will bend and change shape. The energy needed to bend the stick is stored inside the stick as potential energy.
Forces Inside Earth Earthquake Causes If the force keeping the stick bent is removed, the stick will return to its original shape, and the stored energy will be released as energy of motion.
Fault Formation There is a limit to how far a wooden craft stick can bend. This is called its elastic limit. Once its elastic limit is passed, the stick remains bent or breaks. Forces Inside Earth
Forces Inside Earth Fault Formation Rocks behave in a similar way. Once the elastic limit is passed, the rocks may break. When rocks break, they move along surfaces called faults.
Forces Inside Earth Fault Formation A tremendous amount of force is required to overcome the strength of rocks and to cause movement along a fault. Rock along one side of a fault can move up, down, or sideways in relation to rock along the other side of the fault.
Forces Inside Earth What causes faults? The surface of Earth is in constant motion because of forces inside the planet. These forces cause sections of Earth s surface, called plates, to move. This movement puts stress on the rocks near the plate edges.
Forces Inside Earth What causes faults? To relieve this stress, the rocks tend to bend, compress, or stretch. If the force is great enough, the rocks will break.
Forces Inside Earth What causes faults? An earthquake is the vibrations produced by the breaking of rock. Most earthquakes occur near plate boundaries.
Forces Inside Earth What causes faults?
Forces Inside Earth How Earthquakes Occur As rocks move past each other along a fault, their rough surfaces catch, temporarily halting movement along the fault. However, forces keep driving the rocks to move.
How Earthquakes Occur The stress causes the rocks to bend and change shape. When the rocks are stressed beyond their elastic limit, they can break, move along the fault, and return to their original shapes. An earthquake results. Forces Inside Earth
Forces Inside Earth Types of Faults Three types of forces tension, compression, and shear act on rocks. Tension is the force that pulls rocks apart Compression is the force that squeezes rocks together. Shear is the force that causes rocks on either side of a fault to slide past each other.
Forces Inside Earth Along a normal fault, rock above the fault surface moves downward in relation to rock below the fault surface. Normal Faults The motion along a normal fault is shown.
Forces Inside Earth Reverse Faults Reverse faults result from compression forces that squeeze rock. If rock breaks from forces pushing from opposite directions, rock above a reverse fault surface is forced up and over the rock below the fault surface.
Strike-Slip Faults At a strike-slip fault, rocks on either side of the fault are moving past each other without much upward or downward movement. Forces Inside Earth The San Andreas Fault is the boundary between two of Earth s plates that are moving sideways past each other.
Question 1 Vibrations produced by breaking rock are called. A. earthquakes B. eruptions C. faults D. liquefaction Forces Inside Earth: Section Check
Forces Inside Earth: Section Check Answer The answer is A. The movement of Earth s plates puts stress on the rocks near the plate edges. If the force is great enough, the rocks will break.
Forces Inside Earth: Section Check Question 2 The type of force that pulls rocks apart is. A. compression B. shear C. surface D. tension
Forces Inside Earth: Section Check The answer is D. Answer Tension forces inside Earth cause rocks to be pulled apart and result in normal faults.
Forces Inside Earth: Section Check Question 3 At a fault, rocks on either side of the fault are moving past each other with little upward or downward movement. A. compression B. normal C. reverse D. strike-slip
Forces Inside Earth: Section Check Answer The answer is D. Shear forces push on rock in opposite directions and create strike-slip faults.
Chapter 11: Earthquakes Section 2: Features of Earthquakes Grade 6 Earth Science Mr. Norton
Features of Earthquakes I need two volunteers Seismic Waves
Features of Earthquakes Seismic Waves When two people hold opposite ends of a rope and shake one end, they send energy through the rope in the form of waves.
Features of Earthquakes Seismic Waves Like the waves that travel through the rope, seismic (SIZE mihk) waves generated by an earthquake travel through Earth.
During a strong earthquake, the ground moves forward and backward, heaves up and down, and shifts from side to side. Seismic Waves The surface of the ground can ripple like waves do in water. Features of Earthquakes
Features of Earthquakes Origin of Seismic Waves Rocks move past each other along faults, creating stress at points where the rocks irregular surfaces catch each other. The stress continues to build up until the elastic limit is exceeded and energy is released in the form of seismic waves.
Features of Earthquakes Origin of Seismic Waves The point where this energy release first occurs is the focus (plural, foci) of the earthquake. Seismic waves are produced and travel outward from the earthquake focus.
Features of Earthquakes Primary Waves When earthquakes occur, three different types of seismic waves are produced. Primary waves (P-waves) cause particles in rocks to move back and forth in the same direction that the wave is traveling.
Primary Waves If you squeeze one end of a coiled spring and then release it, you cause it to compress and then stretch as the wave travels through the spring. Features of Earthquakes Particles in rocks compress and then stretch apart, transmitting primary waves through the rock.
Features of Earthquakes Secondary and Surface Waves Secondary waves (S-waves) move through Earth by causing particles in rocks to move at right angles to the direction of wave travel.
Secondary and Surface Waves Surface waves cause most of the destruction resulting from earthquakes. Surface waves move rock particles in a backward, rolling motion and a side-to-side, swaying motion. Features of Earthquakes
Features of Earthquakes Secondary and Surface Waves Surface waves are produced when earthquake energy reaches the surface of Earth. Surface waves travel outward from the epicenter. The earthquake epicenter (EH pih sen tur) is the point on Earth s surface directly above the earthquake focus.
Features of Earthquakes Locating an Epicenter Different seismic waves travel through Earth at different speeds. Primary waves are the fastest, secondary waves are slower, and surface waves are the slowest.
Features of Earthquakes Locating an Epicenter Scientists have learned how to use the different speeds of seismic waves to determine the distance to an earthquake epicenter. When an epicenter is far from a location, the primary wave has more time to put distance between it and the secondary and surface waves.
Features of Earthquakes Measuring Seismic Waves Seismic waves from earthquakes are measured with an instrument known as a seismograph. Seismographs register the waves and record the time that each arrived.
Features of Earthquakes Measuring Seismic Waves Seismographs consist of a rotating drum of paper and a pendulum with an attached pen. When seismic waves reach the seismograph, the drum vibrates but the pendulum remains at rest.
Features of Earthquakes Measuring Seismic Waves The stationary pen traces a record of the vibrations on the moving drum of paper. The paper record of the seismic event is called a seismogram.
Features of Earthquakes Measuring Seismic Waves Seismographs differ according to whether they are intended to measure horizontal or vertical seismic motions.
Features of Earthquakes Seismograph Stations Primary waves arrive first at seismograph stations, and secondary waves, which travel slower, arrive second. Because surface waves travel slowest, they arrive at seismograph stations last.
Features of Earthquakes This difference in arrival times is used to calculate the distance from the seismograph station to the earthquake epicenter. Seismograph Stations
Features of Earthquakes Seismograph Stations If seismic waves reach three or more seismograph stations, the location of the epicenter can be determined. To locate an epicenter, scientists draw circles around each station on a map.
Features of Earthquakes Seismograph Stations The radius of each circle equals that station s distance from the earthquake epicenter. The point where all three circles intersect is the location of the earthquake epicenter.
Features of Earthquakes Basic Structure of Earth At the very center of Earth is a solid, dense inner core made mostly of iron with smaller amounts of nickel, oxygen, silicon, and sulfur. Above the solid inner core lies the liquid outer core, which also is made mainly of iron.
Features of Earthquakes Basic Structure of Earth Earth s mantle is the largest layer, lying directly above the outer core. It is made mostly of silicon, oxygen, magnesium, and iron.
Features of Earthquakes Basic Structure of Earth The mantle often is divided into an upper part and a lower part based on changing seismic wave speeds. A portion of the upper mantle, called the asthenosphere (as THE nuh sfihr), consists of weak rock that can flow slowly.
Features of Earthquakes Earth s Crust The outermost layer of Earth is the crust. Together, the crust and a part of the mantle just beneath it make up Earth s lithosphere (LIH thuh sfihr). The lithosphere is broken into a number of plates that move over the asthenosphere beneath it.
Features of Earthquakes Earth s Crust The Earth s crust is more than 60 km thick in some mountainous regions and less than 5 km thick under some parts of the oceans. Earth s crust generally is less dense than the mantle beneath it.
Features of Earthquakes Mapping Earth s Internal Structure The speeds and paths of seismic waves change as they travel through materials with different densities. In general, the densities increase with depth as pressures increase.
Features of Earthquakes Mapping Earth s Internal Structure Studying seismic waves has allowed scientists to map Earth s internal structure without being there.
Features of Earthquakes Mapping Earth s Internal Structure In the area on Earth between 105 and 140 from the earthquake focus, no waves are detected. This area is called the shadow zone.
Features of Earthquakes Mapping Earth s Internal Structure Secondary waves are not transmitted through a liquid, so they stop when they hit the liquid outer core. Primary waves are slowed and bent but not stopped by the liquid outer core.
Features of Earthquakes Mapping Earth s Internal Structure Because of this, scientists concluded that the outer core and mantle are made of different materials. Primary waves speed up again as they travel through the solid inner core.
Features of Earthquakes Mapping Earth s Internal Structure The bending of primary waves and the stopping of secondary waves create the shadow zone.
Features of Earthquakes Layer Boundaries Seismic waves speed up when they pass through the bottom of the crust and enter the upper mantle. This boundary between the crust and upper mantle is called the Mohorovicic discontinuity (moh huh OH vee chihch dis kahn tuh NEW uh tee), or Moho.
Layer Boundaries The mantle is divided into layers based on changes in seismic wave speeds. Primary and secondary waves slow down again when they reach the asthenosphere. Then they generally speed up as they move through a more solid region of the mantle below the asthenosphere. Features of Earthquakes
Features of Earthquakes The core is divided into two layers based on how seismic waves travel through it. Secondary waves do not travel through the liquid core. Layer Boundaries
Features of Earthquakes Layer Boundaries Primary waves slow down when they reach the outer core, but they speed up again upon reaching the solid inner core.
Features of Earthquakes: Section Check Question 1 waves cause most of the destruction during earthquakes. A. Primary B. Secondary C. Surface D. Tension
Features of Earthquakes: Section Check Answer The answer is C. Surface waves move rock particles in backward, rolling, and swaying motions that many buildings are unable to withstand.
Features of Earthquakes: Section Check Question 2 Which causes rock particles to move in the same direction that the wave is traveling? A. primary waves B. secondary waves C. surface waves D. tertiary waves
Features of Earthquakes: Section Check Answer The answer is A. Primary waves cause particles to move parallel to the direction of wave movement.
Features of Earthquakes: Section Check Question 3 The outermost layer of Earth is called the. A. asthenosphere B. crust C. outer core D. upper mantle
Features of Earthquakes: Section Check Answer The answer is B. The crust is the outermost layer, and the upper mantle is the next layer.
Chapter 11: Earthquakes Section 3: People and Earthquakes Grade 6 Earth Science Mr. Norton
Earthquakes are natural geological events that provide information about Earth. Earthquake Activity Unfortunately, they also cause billions of dollars in property damage and kill and average of 10,000 people every year. People and Earthquakes
People and Earthquakes Earthquake Activity With so many lives lost and such destruction, it is important for scientists to learn as much as possible about earthquakes to try to reduce their impact on society.
People and Earthquakes Studying Earthquakes Scientists who study earthquakes and seismic waves are seismologists. Seismologists can use records from seismographs, called seismograms, to learn more than just where the epicenter of an earthquake is located.
People and Earthquakes Measuring Earthquake Magnitude The height of the lines traced on the paper of a seismograph is a measure of the energy that is released, or the magnitude, of the earthquake. Click image to view the movie.
People and Earthquakes Measuring Earthquake Magnitude The Richter magnitude scale is used to describe the strength of an earthquake and is based on the height of the lines on the seismogram. The Richter scale has no upper limit. However, scientists think that a value of about 9.5 would be the maximum strength an earthquake could register.
People and Earthquakes Measuring Earthquake Magnitude For each increase of 1.0 on the Richter scale, the height of the line on a seismogram is ten times greater. However, about 32 times as much energy is released for every increase of 1.0 on the scale.
Past Earthquakes Most of the earthquakes you hear about are large ones that cause great damage. However, of all the earthquakes detected throughout the world each year, most have magnitudes too low to be felt by humans. People and Earthquakes
People and Earthquakes Past Earthquakes Scientists record thousands of earthquakes every day with magnitudes of less than 3.0. Each year, about 55,000 earthquakes are felt but cause little or no damage.
Describing Earthquake Intensity The modified Mercalli intensity scale describes the intensity of an earthquake using the amount of structural and geologic damage in a specific location. Under ideal conditions, only a few people would feel an intensity-i earthquake, and it would cause no damage.
People and Earthquakes Describing Earthquake Intensity An intensity-iv earthquake would be felt by everyone indoors during the day but would be felt by only a few people outdoors. An intensity-ix earthquake would cause considerable damage to buildings and would cause cracks in the ground.
People and Earthquakes Describing Earthquake Intensity An intensity-xii earthquake would cause total destruction of buildings, and objects such as cars would be thrown upward into the air.
People and Earthquakes Liquefaction Wet soil can be strong most of the time, but the shaking from an earthquake can cause it to act more like a liquid. This is called liquefaction. When liquefaction occurs in soil under buildings, the buildings can sink into the soil and collapse.
People and Earthquakes Tsunamis An earthquake under the ocean causes a sudden movement of the ocean floor. The movement pushes against the water, causing a powerful wave that can travel thousands of kilometers in all directions.
People and Earthquakes Tsunamis Ocean waves caused by earthquakes are called seismic sea waves, or tsunamis (soo NAH meez). Far from shore, a wave caused by an earthquake is so long that a large ship might ride over it without anyone noticing.
People and Earthquakes Tsunamis But, when one of these waves breaks on a shore, it forms a towering crest that can reach 30 m in height.
People and Earthquakes Tsunami Warnings Just before a tsunami crashes onto shore, the water along a shoreline might move rapidly toward the sea. This should be taken as a warning sign that a tsunami could strike soon. You should head for higher ground immediately.
People and Earthquakes Tsunami Warnings A warning system has been set up in coastal areas and for the Pacific Islands to alert people if a tsunami is likely to occur. The Pacific Tsunami Warning Center provides warning information including predicted tsunami arrival times at coastal areas.
People and Earthquakes Tsunami Warnings Tsunami warnings can t prevent all loss of life. In the 1960 tsunami that struck Hawaii, 61 people died when they ignored the warning to move away from coastal areas.
People and Earthquakes Earthquake Safety This map shows where earthquakes are most likely to occur in the United States. Knowing where earthquakes are likely to occur helps in longterm planning.
People and Earthquakes Earthquake Safety Many buildings withstood the 1989 Loma Prieta earthquake because they were built with the expectation that such an earthquake would occur someday.
People and Earthquakes Quake-Resistant Structures Seismic-safe structures stand up to vibrations that occur during an earthquake. In California, some new buildings are supported by flexible, circular moorings placed under the buildings.
Quake-Resistant Structures The moorings are made of steel plates filled with alternating layers of rubber and steel. The rubber acts like a cushion to absorb earthquake waves. Buildings supported in this way should be able to withstand an earthquake measuring up to 8.3 on the Richter scale. People and Earthquakes
People and Earthquakes Quake-Resistant Structures In older buildings, workers often install steel rods to reinforce building walls. Such measures protect buildings in areas that are likely to experience earthquakes.
People and Earthquakes Before an Earthquake To reduce the danger of injuries from falling objects, move heavy objects from high shelves to lower shelves. Learn how to turn off the gas, water, and electricity in your home.
People and Earthquakes Before an Earthquake Make sure that water heaters and other gas appliances are held securely in place. A newer method that is being used to minimize the danger of fire involves placing sensors on gas lines. The sensors automatically shut off the gas when earthquake vibrations are detected.
People and Earthquakes During an Earthquake If you re indoors, move away from windows and any objects that could fall on you. Seek shelter in a doorway or under a sturdy table or desk.
People and Earthquakes During an Earthquake If you re outdoors, stay in the open away from power lines or anything that might fall. Stay away from chimneys or other parts of buildings that could fall on you.
People and Earthquakes After an Earthquake If water and gas lines are damaged, the valves should be shut off by an adult. If you smell gas, leave the building immediately and call authorities from a phone away from the leak area.
After an Earthquake Stay away from damaged buildings. Be careful around broken glass and rubble, and wear boots or sturdy shoes to keep from cutting your feet. Finally, stay away from beaches. Tsunamis sometimes hit after the ground has stopped shaking. People and Earthquakes
People and Earthquakes: Section Check Question 1 occurs when wet soil acts like a liquid due to the shaking from an earthquake. A. A shock wave B. Intensity-I C. Liquefaction D. Sublimation
People and Earthquakes: Section Check Answer The answer is C. Liquefaction occurs when wet soil acts more like a liquid during an earthquake.
People and Earthquakes: Section Check Question 2 Ocean waves caused by earthquakes are called. A. breakers B. monsoons C. tsunamis D. typhoons
People and Earthquakes: Section Check Answer The answer is C. Tsunamis are seismic ocean waves caused by earthquakes.
People and Earthquakes: Section Check Question 3 A seismograph records lines that indicate the of an earthquake. A. depth B. direction C. magnitude D. radius
People and Earthquakes: Section Check The answer is C. Answer Seismographs measure the magnitude of earthquakes the energy that is released. Seismologists can use data from these instruments to determine the location of the earthquake s epicenter.