DZ-G Series Small Signal Zener Diodes, Dual PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T specification Pulse current Int. construction Dual common cathode FEATURES Dual silicon planar Zener diodes, common cathode The Zener voltages are graded according to the international E standard. Standard Zener voltage tolerance is ± %. The parameters are valid for both diodes in one case. and R zj of the two diodes in one case is % AEC-Q qualified ESD capability according to AEC-Q: Human body model > 8 k Machine model > 8 Base P/N-G - green, commercial grade Material categorization: For definitions of compliance please see www.vishay.com/doc?999 ORDERING INFORMATION DEICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY DZ-G-Series DZC-G-8 to DZC-G-8 (8 mm tape on " reel) DZC-G-8 to DZC-G-8 (8 mm tape on " reel) PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING SOT- 8. mg UL 9 - MOISTURE SENSITIITY LEEL MSL level (according J-STD-) SOLDERING CONDITIONS 6 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL ALUE UNIT Power dissipation Thermal resistance, junction to ambient air Device on fiberglass substrate, see layout on page 6 Device on fiberglass substrate, see layout on page 6 P tot mw R thja K/W Junction temperature C Storage temperature range T stg - 6 to + C Operating temperature range T op - to + C Zener current P tot / Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
DZ-G Series ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER OLTAGE RANGE () TEST CURRENT REERSE OLTAGE DYNAMIC RESISTANCE f = khz TEMPERATURE COEFFICIENT OF ZENER OLTAGE at T T T R at I R Z Z at T Z ZK at T Z at T na - / C MIN. NOM. MAX. MAX. MAX. MAX. MIN. MAX. DZC-G...9 - - (< 8) < - 9 - DZC-G.8.. - - 8 (< 9) < - 9 - DZC-G... - - 8 (< 9) < - 8 - DZC6-G..6.8 - - 8 (< 9) < - 8 - DZC9-G..9. - - 8 (< 9) < - - DZC-G 6..6 - - 8 (< 9) < - 6 - DZC-G.. - - (< 8) < - DZC-G 8.8.. >.8 (< 6) < 8 - DZC6-G 9..6 6 > (< ) < - 6 DZC6-G.8 6. 6.6 >.8 (< ) < - DZC68-G 6. 6.8. >. (< 8) < DZC-G..9 > (< ) < DZC8-G. 8. 8. > 6. (< ) < DZC9-G 8. 9. 9.6 >.8 (< ) < 8 DZC-G 9..6 >.. (< ) < 8 DZC-G 6..6 > 8. 6 (< ) < 9 DZC-G.. > 9 (< ) < 9 6 9 DZC-G 8.. > 9 (< ) < 9 DZC-G 9.8.6 > (< ) < 9 DZC6-G 6. 6. > (< ) < 8 9. DZC8-G 6 6.8 8 9. > 8 (< ) < 8 9. DZC-G 6 8.8. > (< ) < 8 DZC-G 6.8. > (< ) < 8 DZC-G 6.8.6 > 8 8 (< 8) < 8 DZC-G 6. 8.9 > (< 8) < 8 DZC-G 66 8 >. (< 8) < 8 DZC-G 6 > (< 8) < 8 DZC6-G 68 6 8 > (< 9) < 8 DZC9-G 69 9 > 9 (< 9) < DZC-G 6 > 6 (< ) < DZC-G > (< ) < DZC-G 8 > 8 (< ) < Note () Tested with pulses t p = ms Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
DZ-G Series TYPICAL CHARACTERISTICS (T amb = C, unless otherwise specified) I F - - - - - 8 = C = C...6.8 F Fig. - Forward Characteristics r zj. 89 = C 8 6.8/8. 6. Fig. - Dynamic Resistance vs. Zener Current mw = C P tot R zj + 9 6 C 8 T amb Fig. - Admissible Power Dissipation vs. Ambient Temperature. 8 Fig. - Dynamic Resistance vs. Zener Current r zj = C..6...6. 8 Fig. - Dynamic Resistance vs. Zener Current R zth 8 R zth = R tha x x negative positive at = Fig. 6 - Thermal Differential Resistance vs. Zener oltage Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
DZ-G Series R zj 8 = C = m/ C 8 6 = 6 8 8 Fig. - Dynamic Resistance vs. Zener oltage Fig. - Temperature Dependence of Zener oltage vs. Zener oltage m/ C - 8 = Fig. 8 - Temperature Dependence of Zener oltage vs. Zener oltage 9 8 6 6 = - 6 8 C 86 Fig. - Change of Zener oltage vs. Junction Temperature.8..6..... at =. - -..6. 6 8 C 8 8 6..9.6.6...8.6.. -. -. 8 = R zth x at = Fig. 9 - Change of Zener oltage vs. Junction Temperature Fig. - Change of Zener oltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
DZ-G Series = R zth x = l Z 8 = C = Test current 6 6 8 88 Fig. - Change of Zener oltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage 8 Fig. - Breakdown Characteristics l Z = C...9.6. 6.8 8. l Z 8 6 Test current 9 = C Test current 6 8 9 8 Fig. - Breakdown Characteristics 6 8 9 8 Fig. 6 - Breakdown Characteristics LAYOUT FOR R thja TEST Thickness: fiberglass.9" (. mm) Copper leads." (. mm). (.) (.) (.) (.) (.8) (.8) (.) (.9).8 (.) (.). (.6). (.) Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
DZ-G Series PACKAGE DIMENSIONS in millimeters (inches): SOT-. (.).8 (.). (.) max.. ref. (. ref.). (.).98 (.). (.8). (.).9 (.). (.8). (.). (.8). (.). (.). (.).6 (.). (.9) to 8. (.8). (.). (.6). (.) Foot print recommendation:. (.8) (.9).9 (.) (.9).9 (.) (.9).9 (.) Document no.: 6.-.- Rev. 8 - Date:.Sept.9 8.9 (.).9 (.) Rev.., -Mar- 6 Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. ISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERED Revision: 8-Feb- Document Number: 9