Stainless steel products by Schlüter-Systems
High quality Schlüter stainless steel profiles Stainless steel is enjoying increasing popularity and necessity in architectural projects. In response to this rising demand, Schlüter-Systems now offers a broad assortment of profiles made of this material. All our stainless steel products are made of V2A steel and in many cases are also available in V4A steel. Stainless steel V4A, with its special resistance to chemicals, was developed for applications with an increased risk of exposure to chemicals, such as swimming pools or industrial facilities. Schlüter-Systems is pleased to present an extended range of V4A products. Profiles with special radius perforation are labelled with a R symbol. In addition to the traditional finishing profiles Schlüter -SCHIENE and Schlüter - RONDEC, Schlüter-Systems now also offers edge protection profiles (Schlüter -ECK), stair nosing profiles (Schlüter -TREP-E), movement joint profiles (Schlüter -DILEX- EKSN, Schlüter -DILEX-EKSB and Schlüter -DILEX-EKSBT), as well as cove shaped profiles (Schlüter -DILEX-EHK and Schlüter -DILEX-HKS) in stainless steel V4A. This material with enhanced corrosion resistance is especially suitable for use in the applications listed above. With this addition to the product range, Schlüter-Systems is able to offer lasting protection of tile coverings in applications with heavy exposure to chemicals. Our Technical Department is pleased to assist designers and installers with any questions regarding the right material choices. 2
What is stainless steel? Stainless steel is the collective term for a group of more than 160 rust resistant steels, all of which have a different composition. The designation is based on the formation of a chromium oxide layer at the surface of the stainless steel in a thickness of thousandths of millimetres. Even though this layer is very thin, it is capable of consistently renewing itself after mechanical damage, which means that this steel will not rust during normal use. This presumes that the protective layer will not be damaged permanently (e.g. by external corrosion or certain chemicals such as hydrochloric acid). Such damage can occur in areas with chemical stresses (such as outdoor areas near the sea, or with high industrial air pollution levels), in the food industry, or in swimming pools. In those applications, the use of V4A steel (material no. 1.4404) is recommended instead of conventional V2A stainless steel (material no. 1.4301), since this material has better corrosion resistance for those special requirements. i The official designation for material no. 1.4301 according to DIN EN 10088 is as follows: Abbreviated name X5CrNi18-10. The official designation for material no. 1.4404 according to DIN EN 10088 is as follows: Abbreviated name X2CrNiMo17-12-2. 3
Maintenance recommendations for stainless steel products Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Avoid contact with other metals, such as regular steel, to prevent corrosion. This also includes installation tools such as trowels or steel wool, e.g. for the removal of mortar residue. Do not use abrasive cleaning agents on the sensitive surfaces. The stainless steel cleaning polish Schlüter -CLEAN-CP may be used if necessary. 4
C O N T E N T S Overview of stainless steel products Finishing profiles for floor coverings 6 8 Wall corners and finishing profiles 9 11 Stair nosing profiles 12 14 Movement joint and stress relieving profiles 15 18 Drainage 19 20 Balcony and terrace assemblies 21 24 5
Schlüter -PROFILES F I N I S H I N G P R O F I L E S F O R F L O O R C O V E R I N G S Finishing profiles such as the original Schlüter -SCHIENE are installed at the perimeter of tiled coverings and protect the outside edges of ceramic tile and natural stone coverings from mechanical impact. Schlüter -RENO profiles create a seamless transition to adjoining floor coverings. All our finishing profiles for floor areas protect and enhance the floor covering. 6
F I N I S H I N G P R O F I L E S F O R F L O O R C O V E R I N G S Schlüter -SCHIENE-E R Schlüter -SCHIENE-E is a special profile that finishes and protects the edges of tiled surfaces. It can also be used in conjunction with other covering materials. Variations of Schlüter -SCHIENE-E 1.00 m: 4 heights of 6-12.5 mm 2.50 m: 18 heights of 2-30 mm 2 mm = H Variations of Schlüter -SCHIENE-EB Brushed stainless steel V2A 2.50 m: 4 heights of 6-12.5 mm Variations of Schlüter -SCHIENE-E V4A Stainless steel V4A 2.50 m: 13 heights of 4.5-30 mm Schlüter -RENO-ETK Schlüter -RENO-ETK is a profile that provides a smooth transition between tiled surfaces and lower adjacent floor coverings, such as carpet or other materials. It effectively protects the edges of adjoining coverings from damage. Variations of Schlüter -RENO-ETK 1.00 m: 3 heights of 8-12.5 mm 2.50 m: 3 heights of 8-12.5 mm Variations of Schlüter -RENO-EBTK Brushed stainless steel V2A 1.00 m: 3 heights of 8-12.5 mm 2.50 m: 3 heights of 8-12.5 mm 6 mm = H Schlüter -RENO-EU Schlüter -RENO-EU is a stainless steel profile that provides a smooth transition between floor coverings of different heights. Variations of Schlüter -RENO-EU 1.00 m: 3 heights of 8-12.5 mm 2.50 m: 6 heights of 8-20 mm Variations of Schlüter -RENO-EBU Brushed stainless steel V2A 1.00 m: 3 heights of 8-12.5 mm 2.50 m: 6 heights of 8-20 mm 4 = H R Radius perforation: see Illustrated Price List 7 7
F I N I S H I N G P R O F I L E S F O R F L O O R C O V E R I N G S Schlüter -RENO-T-E Schlüter -RENO-T-E is retrofitted to adjoin different types of floor coverings of the same height. Variations of Schlüter -RENO-T-E 1.00 m: 2 widths: 14 mm, 25 mm 2.50 m: 2 widths: 14 mm, 25 mm Variations of Schlüter -RENO-T-EB Brushed stainless steel V2A 1.00 m: 2 widths: 14 mm, 25 mm 2.50 m: 2 widths: 14 mm, 25 mm 1.5 B 9 Schlüter -DECO-E Schlüter -DECO-E is a profile with a wide visible surface for creating decorative joint designs in tiled surfaces. Variations of Schlüter -DECO-E 2.50 m: 11 heights of 8-30 mm 8
Schlüter -PROFILES WA L L C O R N E R S A N D F I N I S H I N G P R O F I L E S The profiles of the Schlüter -QUADEC and Schlüter -RONDEC product ranges create mechanically durable and decorative finishing edges on wall coverings and skirtings made of tiles and natural stone. Schlüter -ECK profiles are particularly suitable for heavily used areas. The Schlüter -DESIGNLINE border profiles or the internal corner profiles Schlüter -ECK-KI and -KHK allow for decorative accents. 9
W A L L C O R N E R S A N D F I N I S H I N G P R O F I L E S Schlüter -RONDEC-E R Schlüter -RONDEC-E is a symmetrically rounded profile designed to protect and decorate external wall corners and other tiled edges, e.g. tiled skirting. Variations of Schlüter -RONDEC-E 1.00 m: 4 heights of 6-12.5 mm 2.50 m: 9 heights of 4.5-15 mm Variations of Schlüter -RONDEC-EB Brushed stainless steel V2A 2.50 m: 8 heights of 6-15 mm Variations of Schlüter -RONDEC-EP Polished stainless steel V2A 2.50 m: 5 heights of 6-15 mm Accessories: Internal and external corners, connector, end caps Variations of Schlüter -RONDEC-E V4A Stainless steel V4A 2.50 m: 4 heights of 6-12.5 mm Schlüter -QUADEC-E R Schlüter -QUADEC is a high quality finishing profile of stainless steel, providing excellent edge protection for the outside corners of tiled walls. The exposed area of the profile forms the right angled external corner of the tile covering. Variations of Schlüter -QUADEC-E 2.50 m: 8 heights of 6-15 mm = H Variations of Schlüter -QUADEC-EB Brushed stainless steel V2A 2.50 m: 8 heights of 6-15 mm Variations of Schlüter -QUADEC-EP Polished stainless steel V2A 2.50 m: 5 heights of 6-15 mm Variations of Schlüter -QUADEC-E V4A Stainless steel V4A 2.50 m: 4 heights of 6-12.5 mm Accessories: Stainless steel corner pieces can be used for internal and external corners, connector and end caps Schlüter -DESIGNLINE-E Schlüter -DESIGNLINE-E is a border profile for creating decorative designs in wall coverings. These profiles can be combined with the appropriate Schlüter -RONDEC profiles for external wall corners. The stainless steel profile is also suitable for use in floor coverings. Variations of Schlüter -DESIGNLINE-E Polished stainless steel V2A Supplied length: 2.50 m Variations of Schlüter -DESIGNLINE-EB Brushed stainless steel V2A Supplied length: 2.50 m 10 R Radius perforation: see Illustrated Price List
W A L L C O R N E R S A N D F I N I S H I N G P R O F I L E S Schlüter -ECK-E Schlüter -ECK-E is a stainless steel corner profile that provides stable edge protection for external wall corners of tile coverings. The perforated anchoring legs are fully embedded in the tile adhesive during the installation of the tiles. Variations of Schlüter -ECK-E 3 heights: 6 mm, 8 mm, 11 mm Supplied lengths 90 : 1.50 m, 2.00 m, 2.50 m, 3.00 m Supplied lengths 135 : 2.50 m, 3.00 m Variations of Schlüter -ECK-EB Brushed stainless steel V2A 3 heights: 6 mm, 8 mm, 11 mm Supplied lengths 90 : 1.50 m, 2.00 m, 2.50 m, 3.00 m Supplied lengths 135 : 2.50 m, 3.00 m E 90 E 135 Variations of Schlüter -ECK-E V4A Stainless steel V4A - 90 2 heights: 8 mm, 11 mm Supplied lengths: 1.50 m, 2.00 m, 2.50 m, 3.00 m Schlüter -ECK-K-E Schlüter -ECK-K-E is a stainless steel corner profile that is retrofitted to protect the external corners of tiled walls or other wall coverings. = B = B Variations of Schlüter -ECK-K-E 3 widths 90 : 15 mm, 32 mm, 50 mm Lengths 135 : 32 mm Supplied lengths: 1.50 m, 2.00 m, 2.50 m, 3.00 m Variations of Schlüter -ECK-K-EB Brushed stainless steel V2A - 90 3 widths: 15 mm, 32 mm, 50 mm Supplied lengths: 1.50 m, 2.00 m, 2.50 m, 3.00 m Variations of Schlüter -ECK-K-E V4A Stainless steel V4A - 90 Width: 32 mm Supplied lengths: 1.50 m, 2.00 m, 2.50 m Schlüter -ECK-KI-E Schlüter -ECK-KI-E is a stainless steel corner profile that is retrofitted to the internal corners of tiled walls or other wall coverings. Variations of Schlüter -ECK-KI-E/-EB Brushed stainless steel V2A Supplied lengths: 1.50 m, 2.00 m, 2.50 m, 3.00 m r = 3 mm E 90 15 mm r = 1 mm E 135 Schlüter -ECK-KHK-E Schlüter -ECK-KHK is a cove shaped, stainless steel corner profile that is retrofitted to the internal corners of tiled walls or other wall coverings. Variations of Schlüter -ECK-KHK-E/-EB Brushed stainless steel V2A Supplied lengths: 1.50 m, 2.00 m, 2.50 m, 3.00 m 15 mm r = 8 mm KHK/E KHK/I2 KHK/I3 KHK/V Accessories: Internal and external corners, connector 11
Schlüter -PROFILES S TA I R N O S I N G P R O F I L E S Stair nosings are exposed to heavy mechanical stresses and represent a high accident risk. Schlüter -TREP profiles offer improved safety due to their slip resistant design and high visibility. They protect stair nosings from damage ensuring that the tile covering remains damage free. 12
S T A I R N O S I N G P R O F I L E S Schlüter -TREP-S-E Schlüter -TREP-S-E is a slip resistant stair nosing profile made of stainless steel with a replaceable thermoplastic tread. Variations of Schlüter -TREP-S-E Stainless steel support profile, narrow, V2A 3 heights: 8 mm, 10 mm, 12.5 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Colours: yellow (CG), grey (G), black (GS), light beige (HB), nut brown (NB) Accessories: End caps Schlüter -TREP-E Schlüter -TREP-E is a stainless steel stair nosing profile with a special non slip tread. Variations of Schlüter -TREP-E 8 heights: of 2-25 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Variations of Schlüter -TREP-E V4A Stainless steel V4A 4 heights: 8 mm, 11 mm, 13 mm, 16 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Accessories: End caps Schlüter -TREP-EK Schlüter -TREP-EK is a stainless steel stair nosing profile with a special non slip tread to create safe and attractive stair edges. It can be retrofitted to steps with tile or natural stone coverings. Variations of Schlüter -TREP-EK Supplied lengths: 1.00 m, 1.50 m, 2.50 m Schlüter -TREP-FL Schlüter -TREP-FL is a stainless steel stair nosing profile in Florentine design for enhancing the safety and visual appeal of stair edges. Variations of Schlüter -TREP-FL-E 3 heights: 9 mm, 11 mm, 12.5 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Variations of Schlüter -TREP-FL-EB Brushed stainless steel V2A 3 heights: 9 mm, 11 mm, 12.5 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Accessories: End caps 13 13
S T A I R N O S I N G P R O F I L E S Schlüter -TREP-G Schlüter -TREP-G is a stair nosing profile of brushed stainless steel with an adhered, non slip tread. Variations of Schlüter -TREP-G-B Brushed stainless steel V2A, wide 4 heights: 9 mm, 11 mm, 13 mm, 15 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Colours: yellow (CG), black (GS), nut brown (NB), transparent (T) 17 mm 30 / 55 mm = H Variations of Schlüter -TREP-G-S Brushed stainless steel V2A, narrow 4 heights: 9 mm, 11 mm, 13 mm, 15 mm Supplied lengths: 1.00 m, 1.50 m, 2.50 m Colours: yellow (CG), black (GS), nut brown (NB), transparent (T) Accessories: End caps, slip resistant tape Schlüter -TREP-GK Schlüter -TREP-GK is a stair nosing profile of brushed stainless steel with an adhered, non slip tread. It can be retrofitted to steps with tile or natural stone coverings. Variations of Schlüter -TREP-GK-B Brushed stainless steel V2A, wide Supplied lengths: 1.00 m, 1.50 m, 2.50 m Colours: yellow (CG), black (GS), nut brown (NB), transparent (T) Variations of Schlüter -TREP-GK-S Brushed stainless steel V2A, narrow Supplied lengths: 1.00 m, 1.50 m, 2.50 m Colours: yellow (CG), black (GS), nut brown (NB), transparent (T) Accessories: 1.5 Slip resistant tape 14
Schlüter -PROFILES M O V E M E N T J O I N T A N D S T R E S S R E L I E V I N G P R O F I L E S The profiles of the Schlüter -DILEX range offer maintenance free and functional solutions for all relevant movement in tile coverings. The product range includes profile types for structural joints, perimeter joints, edge joints and connection joints. The profiles are installed at the same time as the tiles. Schlüter -DILEX profiles are available in various materials, depending on the expected mechanical or chemical stresses of the covering. 15
M O V E M E N T J O I N T A N D S T R E S S R E L I E V I N G P R O F I L E S Schlüter -DILEX-EMP Schlüter -DILEX-EMP is a movement profile of stainless steel with a tongue and groove mechanism that absorbs horizontal movement. Variations of Schlüter -DILEX-EMP 2.50 m: 3 heights of 35-65 mm Schlüter -DILEX-EKSBT Schlüter -DILEX-EKSBT is a structural movement profile with edge protection. The profile's anchoring legs, made of stainless steel, are connected to a 20 mm or 30 mm wide movement zone made of soft synthetic rubber. Variations of Schlüter -DILEX-EKSBT 20 2.50 m: 9 heights of 8-30 mm 11 KSBT 30 / VE KSBT 20 / EL KSBT 30 / EL Variations of Schlüter -DILEX-EKSBT 30 2.50 m: 9 heights of 8-30 mm Variations of Schlüter -DILEX-EKSBT 20 V4A Stainless steel V4A 2.50 m: 5 heights of 8-16 mm Accessories: Movement zone inserts, stainless steel insert for movement zone for Schlüter -DILEX-EKSBT 30 Variations of Schlüter -DILEX-EKSBT 30 V4A Stainless steel V4A 2.50 m: 5 heights of 8-16 mm Schlüter -DILEX-EKSN Schlüter -DILEX-EKSN is a movement profile with edge protection. The profiles anchoring legs, made of stainless steel, are connected to a movement zone made of soft synthetic rubber. Variations of Schlüter -DILEX-EKSN 2.50 m: 10 heights of 8-30 mm Variations of Schlüter -DILEX-EKSN V4A Stainless steel V4A 2.50 m: 5 heights of 8-16 mm Accessories: Movement zone inserts 16
M O V E M E N T J O I N T A N D S T R E S S R E L I E V I N G P R O F I L E S Schlüter -DILEX-EKSB Schlüter -DILEX-EKSB is a movement profile with edge protection for floor coatings and other thin floor coverings. It consists of lateral stainless steel anchoring legs that are connected to a fixed elastic insert of soft synthetic material. Variations of Schlüter -DILEX-EKSB 2.50 m: 3 heights of 2.5-6 mm Variations of Schlüter -DILEX-EKSB V4A Stainless steel V4A 2.50 m: 3 heights of 2.5-6 mm Schlüter -DILEX-EKSA Schlüter -DILEX-EKSA is a connection profile with edge protection. The profile s anchoring legs, made of stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for perimeter movement joints and creating transitions between coverings and fixed structures such as windows. Variations of Schlüter -DILEX-EKSA 2.50 m: 10 heights of 8-30 mm Variations of Schlüter -DILEX-EKSA V4A Stainless steel V4A 2.50 m: 5 heights of 8-16 mm 10 mm = H Schlüter -DILEX-EDP Schlüter -DILEX-EDP is a movement profile of stainless steel with a tongue and groove mechanism that absorbs horizontal movement. Variations of Schlüter -DILEX-EDP 2.50 m: 11 heights of 8-30 mm Schlüter -DILEX-HKS-E Schlüter -DILEX-HKS-E is a stainless steel cove shaped profile with a maintenance free movement zone for floor to wall connections in ceramic tile coverings.. Variations of Schlüter -DILEX-HKS-E 2.50 m: U = 8-30 mm / O = 7-11 mm Variations of Schlüter -DILEX-HKS-EB Brushed stainless steel V2A 2.50 m: U = 8-30 mm / O = 9-11 mm Variations of Schlüter -DILEX-HKS-E V4A Stainless steel V4A 2.50 m: U = 8-16 mm / O = 7-11 mm Accessories: Connectors, internal and external corners 17
M O V E M E N T J O I N T A N D S T R E S S R E L I E V I N G P R O F I L E S Schlüter -DILEX-EHK Schlüter -DILEX-EHK is a cove shaped profile made entirely of stainless steel for internal corners and floor to wall transitions in environments with stringent hygiene requirements. Variations of Schlüter -DILEX-EHK 2.50 m: U = 7-11 mm / O = 7-11 mm Variations of Schlüter -DILEX-EBHK Brushed stainless steel V2A 2.50 m: U = 7-11 mm / O = 7-11 mm Variations of Schlüter -DILEX-EHK V4A Stainless steel V4A 2.50 m: U = 7-16 mm / O = 7-16 mm Accessories: Connectors, internal and external corners 18
Schlüter -PROFILES DRAINAGE Schlüter-Systems carries a full assortment of accessories for the construction of barrier-free, floorlevel showers with ceramic tiles and natural stone. Whether the design calls for central drainage or modern linear drainage, our Schlüter -KERDI-DRAIN and Schlüter -KERDI-LINE products provide the right solution. What s more, the tapered profiles and wall connection profiles of the Schlüter - SHOWERPROFILE family offer elegant and practical detail solutions for any design. 19
d r a i n a g e Schlüter -KERDI-LINE-H Schlüter -KERDI-LINE-H is a complete set for linear floor-level showers with a horizontal drain. It can be universally used for intermediate installation in floor or wall areas. Versions of Schlüter -KERDI-LINE-H Supplied lengths: 8 lengths from 0.50 to 1.20 m 22 57 mm 22 DN 50 (50mm) 120 mm 97 mm Schlüter -KERDI-LINE-V Schlüter -KERDI-LINE-V is a complete set for linear floor-level showers with a vertical drain. It can be universally used for intermediate installation in floor or wall areas. Versions of Schlüter -KERDI-LINE-V Supplied lengths: 8 lengths from 0.50 to 1.20 m 24 22 57 mm 22 120 mm Schlüter -KERDI-LINE-A /-B /-C Schlüter -KERDI-LINE (KLA, KLB, KLC) are insertion frames of brushed stainless steel with design grates that match the Schlüter -KERDI-LINE channel bodies. A 10 47 mm 74 mm =H Versions of Schlüter -KERDI-LINE-A /-B /-C Supplied lengths: 8 lengths from 0.50 to 1.20 m B 10 54 mm 74 mm =H C 10 47 mm 74 mm 10 =H Schlüter -SHOWERPROFILE-S Schlüter -SHOWERPROFILE-S is a tapered profile made of a brush stainless steel flat profile with a 2% slope for covering the sloping edges of floorlevel showers. H = 5 / 10 mm Versions of Schlüter -SHOWERPROFILE-S, brushed with rigid PVC support profile (H = 5/10/12.5-22 mm) Tapered profile 120 cm: H2 = 30 mm Tapered profile 160 cm: H2 = 38 mm = H2 2% = L H1 = 6 Schlüter -SHOWERPROFILE-R Schlüter -SHOWERPROFILE-R is a two-part wall transition profile for covering the exposed wall area where the floor slopes down to a linear drainage. The visible surface of the profile consists of brushed stainless steel. A fleece fabric is laminated the backside for bonding with the tile adhesive. = H Versions of Schlüter -SHOWERPROFILE-R, brushed Height: 23-35 mm Supplied lengths: 1.00 m, 1.40 m 20
d r a i n a g e Schlüter -KERDI-DRAIN-DR Schlüter -KERDI-DRAIN-DR are design grates of solid brushed stainless steel for installation in tiled floor assemblies. Versions of Schlüter -KERDI-DRAIN-DR Length (L) x width (B): 100 mm x 100 mm Design grate 1 KD 10 DR1 Design grate with height adjustment ring KD 10 EDR Design grate 2 KD 10 DR2 Insert set including design grate KD 10 ASDR Schlüter -KERDI-DRAIN-SP-E Schlüter -KERDI-DRAIN-SP-E is a stainless steel spout for draining balconies and terraces that are enclosed by a parapet. Variations of Schlüter -KERDI-DRAIN-SP-E Length (L): 250 mm, 400 mm Pipe diameter: 45 mm 21
Schlüter -PROFILES BALCONY AND TERRACE ASSEMBLIES Schlüter-Systems provides a complete product range of matching components for balcony and terrace constructions with ceramic tile and natural stone. The system offers a broad spectrum of solutions for every individual project and includes stainless steel Schlüter -BARA profiles for balconies, as well as Schlüter -TROBA-LINE height adjustable drainage channels for installation with a low transition height to door elements. 22
B A L C O N Y A N D T E R R A C E A S S E M B L I E S Schlüter -BARA-ESOT Schlüter -BARA-ESOT is a skirting support profile made of stainless steel for use in applications where no load bearing substrate is available to support the skirting tiles. Variations of Schlüter -BARA-ESOT skirting support profile 2.50 m: 2 heights: 60 mm, 110 mm Schlüter -TROBA-LINE-TL Schlüter -TROBA-LINE-TL is a stainless steel drainage channel, which can be installed with low transition heights to door elements on balconies and terraces to prevent the accumulation of water. It can also be used as an area drainage channel. Variations of Schlüter -TROBA-LINE-TL, perforated gutter, W = 75 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m, perforated gutter, W = 110 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m, perforated gutter, W = 160 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m Variations of Schlüter -TROBA-LINE-TLG, closed gutter, W = 75 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m, closed gutter, W = 110 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m, closed gutter, W = 160 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m Schlüter -TROBA-LINE-TL/V Schlüter -TROBA-LINE-TL/V is a reinforcement for Schlüter -TROBA-LINE-TL and Schlüter -TROBA- LINE-TLG to accommodate larger traffic volumes, e.g. pedestrians or wheelchair users. 2 widths: 110 mm, 160 mm Schlüter -TROBA-LINE-TL/H Schlüter -TROBA-LINE-TL/H is a height adjustment for the stainless steel drainage channel Schlüter -TROBA-LINE-TL. Variations of Schlüter -TROBA-LINE-TL/H 2 heights: 20 mm, 40 mm 3 widths: 75 mm, 110 mm, 160 mm 23
B A L C O N Y A N D T E R R A C E A S S E M B L I E S Schlüter -TROBA-LINE-TLR-E Schlüter -TROBA-LINE-TLR-E is a drainage channel with an upper drainage screen made of polished stainless steel which can be installed in balconies and terraces with a low transition height to door elements to prevent the accumulation of water. It can also be used as an area drainage channel for higher traffic loads. Variations of Schlüter -TROBA-LINE-TLR-E, with screen, W = 110 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m, with screen, W = 160 mm 2 heights: 20 mm, 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m Variations of Schlüter -TROBA-LINE-TLGR-E, closed, with screen, W = 110 mm Height: 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m, with screen, closed, W = 160 mm Height: 40 mm Supplied lengths: 0.75 m, 1.00 m, 1.50 m, 2.00 m = B = H Schlüter -TROBA-LINE-TLK-E Schlüter -TROBA-LINE-TLK-E is a stainless steel gravel containment profile to be used at the edge of coverings or load distribution layers. Variations of Schlüter -TROBA-LINE-TLK-E Supplied lengths: 0.75 m, 1.00 m Schlüter -BARA-RW-E R Schlüter -BARA-RW-E is an angled finishing profile of stainless steel for covering exposed edges of balconies and terraces. Variations of Schlüter -BARA-RW-E Angled finishing profile, stainless steel V2A 2.50 m: 9 heights of 15-150 mm RW / E 90 RW / V Accessories: Corners and connectors Schlüter -KERDI-DRAIN-SP-E Schlüter -KERDI-DRAIN-SP-E is a stainless steel spout for draining balconies and terraces that are enclosed by a parapet. Variations of Schlüter -KERDI-DRAIN-SP-E Length (L): 250 mm, 400 mm Pipe diameter: 45 mm 24 Radius perforation: R see Illustrated Price List
N O T E S 25
26 N O T E S
N O T E S 27
T A K E A L O O K A T T H E S E Schlüter -KERDI makes it happen No matter what the design of your dream bathroom may be, the necessary bonded waterproofing assembly is quickly and safely created with Schlüter - KERDI. Thanks to the endless variety of ceramic tile and natural stone there are no limits to your imagination in the design. Ask for a copy of our Schlüter -KERDI brochure today. Cost effective underfloor heating If you don t just want a beautifully tiled room, but a well heated one, too, we can recommend Schlüter -BEKOTEC-THERM. This ceramic thermal comfort floor combines environmentally sound heating comfort with hygiene and easy care. The patented floor assembly, with low construction height and innovative heating and control technology, turns the floor into an energy efficient and cost effective, quick reacting heating system with especially low supply temperatures. But that is not all: the ceramic thermal comfort floor is also quick and easy to install, with many system accessories. Important for renovation projects: Our control valves allow for integrating the ceramic thermal comfort floor into existing conventional heating circuits. Schlüter -BEKOTEC-THERM Ceramic thermal comfort floor Ask for a copy of our ceramic thermal comfort floor brochure today. i Would you like to find out more? Please don t hesitate to give us a call. We will be pleased to send you our latest information, at no charge and without obligation. If you don t want to wait, please visit our websites at: www.schluter.co.uk / www.bekotec-therm.co.uk Art.-Nr. 551 970 - Issue 02/11 Schlüter-Systems KG Schmölestraße 7 D-58640 Iserlohn Tel. 00 49 / 23 71 / 971-261 Fax 00 49 / 23 71 / 971-112 Internet www.schlueter-systems.com Schlüter-Systems Ltd. Units 4-6 Bardon 22 Beveridge Lane COALVILLE Leicestershire LE67 1TE Tel. 00 44 (0) 1530 813396 Fax. 00 44 (0) 1530 813376 Internet www.schluter.co.uk E-mail technical@schluter.co.uk sales@schluter.co.uk