Figure 1 Answer: = m

Similar documents
Q1. Which of the following is the correct combination of dimensions for energy?

Solution to phys101-t112-final Exam

Department of Physics

Phys101 Second Major-173 Zero Version Coordinator: Dr. M. Al-Kuhaili Thursday, August 02, 2018 Page: 1. = 159 kw

PHYS 101 Previous Exam Problems. Force & Motion I

A) 4.0 m/s B) 5.0 m/s C) 0 m/s D) 3.0 m/s E) 2.0 m/s. Ans: Q2.


Q1. A) 46 m/s B) 21 m/s C) 17 m/s D) 52 m/s E) 82 m/s. Ans: v = ( ( 9 8) ( 98)

( ) Physics 201, Final Exam, Fall 2006 PRACTICE EXAMINATION Answer Key. The next three problems refer to the following situation:

Rolling, Torque & Angular Momentum

PHYSICS 221, FALL 2011 EXAM #2 SOLUTIONS WEDNESDAY, NOVEMBER 2, 2011

Use a BLOCK letter to answer each question: A, B, C, or D (not lower case such a b or script such as D)

Phys101 First Major-111 Zero Version Monday, October 17, 2011 Page: 1

Exam 2 Solutions. PHY2048 Spring 2017

PHYS 1303 Final Exam Example Questions

King Fahd University of Petroleum and Minerals Department of Physics. Final Exam 041. Answer key - First choice is the correct answer

43. A person sits on a freely spinning lab stool that has no friction in its axle. When this person extends her arms,

All questions are of equal value. No marks are subtracted for wrong answers.

A B = AB cos θ = 100. = 6t. a(t) = d2 r(t) a(t = 2) = 12 ĵ

is acting on a body of mass m = 3.0 kg and changes its velocity from an initial

1 MR SAMPLE EXAM 3 FALL 2013

UNIVERSITY OF MANITOBA

Practice Problems for Exam 2 Solutions

Potential Energy & Conservation of Energy

Phys101 Third Major-161 Zero Version Coordinator: Dr. Ayman S. El-Said Monday, December 19, 2016 Page: 1

Phys101 Second Major-162 Zero Version Coordinator: Dr. Kunwar S. Saturday, March 25, 2017 Page: N Ans:

Phys101 Third Major-161 Zero Version Coordinator: Dr. Ayman S. El-Said Monday, December 19, 2016 Page: 1

1. The diagram below shows the variation with time t of the velocity v of an object.

Center of Mass & Linear Momentum

A. B. C. D. E. v x. ΣF x

P211 Spring 2004 Form A

PY205N Spring The vectors a, b, and c. are related by c = a b. The diagram below that best illustrates this relationship is (a) I

Write your name legibly on the top right hand corner of this paper

Practice Test 3. Name: Date: ID: A. Multiple Choice Identify the choice that best completes the statement or answers the question.

Mechanics II. Which of the following relations among the forces W, k, N, and F must be true?

= M. L 2. T 3. = = cm 3

Rotation. PHYS 101 Previous Exam Problems CHAPTER

Pre-AP Physics Review Problems

PHYS 1303 Final Exam Example Questions

Phys101 Second Major-162 Zero Version Coordinator: Dr. Kunwar S. Saturday, March 25, 2017 Page: 1

PC 1141 : AY 2012 /13

Chapter 19 Practice Test 2

AP Physics. Harmonic Motion. Multiple Choice. Test E

Written Homework problems. Spring (taken from Giancoli, 4 th edition)

- 1 -APPH_MidTerm. Mid - Term Exam. Part 1: Write your answers to all multiple choice questions in this space. A B C D E A B C D E

Physics 201 Midterm Exam 3

Dynamics Examples. Robin Hughes and Anson Cheung. 28 th June, 2010

Phys 270 Final Exam. Figure 1: Question 1

Concept Question: Normal Force

Practice Test 3. Multiple Choice Identify the choice that best completes the statement or answers the question.

Physics 53 Summer Final Exam. Solutions

Use the following to answer question 1:

Q1. For a completely inelastic two-body collision the kinetic energy of the objects after the collision is the same as:

Exam 3 Practice Solutions

PHYSICS 221 SPRING 2015

Physics 23 Exam 3 April 2, 2009

Test 7 wersja angielska

= y(x, t) =A cos (!t + kx)

PHYSICS 1. Section I 40 Questions Time 90 minutes. g = 10 m s in all problems.

AP Physics C: Rotation II. (Torque and Rotational Dynamics, Rolling Motion) Problems

(A) 10 m (B) 20 m (C) 25 m (D) 30 m (E) 40 m

PHYSICS 221, FALL 2009 EXAM #1 SOLUTIONS WEDNESDAY, SEPTEMBER 30, 2009

UNIVERSITY OF MANITOBA. All questions are of equal value. No marks are subtracted for wrong answers.

(A) 10 m (B) 20 m (C) 25 m (D) 30 m (E) 40 m

Big Ideas 3 & 5: Circular Motion and Rotation 1 AP Physics 1

(A) I only (B) III only (C) I and II only (D) II and III only (E) I, II, and III

Practice Test for Midterm Exam

PHYSICS 221 Fall 2016 EXAM 2: November 02, :15pm 10:15pm. Name (printed): Recitation Instructor: Section #:

Q2. A machine carries a 4.0 kg package from an initial position of d ˆ. = (2.0 m)j at t = 0 to a final position of d ˆ ˆ

Physics for Scientists and Engineers 4th Edition, 2017

r r Sample Final questions for PS 150

Wiley Plus. Final Assignment (5) Is Due Today: Before 11 pm!

The graph shows how an external force applied to an object of mass 2.0 kg varies with time. The object is initially at rest.

Final Exam Name: Box# Physics

2007 Problem Topic Comment 1 Kinematics Position-time equation Kinematics 7 2 Kinematics Velocity-time graph Dynamics 6 3 Kinematics Average velocity

PHYSICS 221 SPRING 2014

Name: Date: Period: AP Physics C Rotational Motion HO19

Dynamics Kinetics of a particle Section 4: TJW Force-mass-acceleration: Example 1

Force, Energy & Periodic Motion. Preparation for unit test

Unit 2: Vector Dynamics

Physics I (Navitas) FINAL EXAM Fall 2015

PHYSICS 221, FALL 2010 EXAM #1 Solutions WEDNESDAY, SEPTEMBER 29, 2010

PHYSICS PAPER 1. (THEORY) (Three hours)

Page kg kg kg kg (Total 1 mark) Q4. The diagram shows two positions, X and Y, o the Ea th s su fa e.

FALL TERM EXAM, PHYS 1211, INTRODUCTORY PHYSICS I Thursday, 11 December 2014, 6 PM to 9 PM, Field House Gym

Sample Final Exam 02 Physics 106 (Answers on last page)

Chapter 12. Recall that when a spring is stretched a distance x, it will pull back with a force given by: F = -kx

Mechanical Energy and Simple Harmonic Oscillator

1. For which of the following motions of an object must the acceleration always be zero?

Physics 12 Final Exam Review Booklet # 1

Summer Physics 41 Pretest. Shorty Shorts (2 pts ea): Circle the best answer. Show work if a calculation is required.

Name (please print): UW ID# score last first

Physics 2101, Final Exam, Form A

1. An object is dropped from rest. Which of the five following graphs correctly represents its motion? The positive direction is taken to be downward.

Solution Only gravity is doing work. Since gravity is a conservative force mechanical energy is conserved:

Pleeeeeeeeeeeeeease mark your UFID, exam number, and name correctly. 20 problems 3 problems from exam 2

FALL TERM EXAM, PHYS 1211, INTRODUCTORY PHYSICS I Saturday, 14 December 2013, 1PM to 4 PM, AT 1003

The net force on a moving object is suddenly reduced to zero. As a consequence, the object

AAPT UNITED STATES PHYSICS TEAM AIP 2017

Name Student ID Score Last First. I = 2mR 2 /5 around the sphere s center of mass?

Transcription:

Q1. Figure 1 shows a solid cylindrical steel rod of length =.0 m and diameter D =.0 cm. What will be increase in its length when m = 80 kg block is attached to its bottom end? (Young's modulus of steel = 1.9 10 11 Pa) FL L = = AY mg AY = = 0.00006689 m A).6 x 10-5 m B) 1.3 x 10-5 m C) 4.8 x 10-5 m D) 7. x 10-5 m E) 3.5 x 10-5 m

Term: 111 Tuesday, January 10, 01 Page: 1 Q. In Fig., PQ is a horizontal uniform beam weighing 155 N. It is supported by a string and a hinge at point P. A 45 N block is hanging from point Q at the end of the beam. Find the horizontal component of net force on the beam from the hinge. Toque about P implies: o 1.7 ( T sin 35 )(1.35) (155) (45)(1.7) = 0 131.75 + 416.5 T = = 708 N o (1.35)sin 35 The force on x-axis implies: FH o ( ) o = T cos35 = 708 cos35 = 579.98 N 580 N A) 580 N B) 310 N C) 491 N D) 164 N E) 00 N

Term: 111 Tuesday, January 10, 01 Page: Q3. A 0.0 m long uniform beam weighing 550 N rests on supports A and B, as shown in Figure 3. Find the magnitude of the force that the support A exerts on the beam when the block of weight 00 N is placed at D. The torque about point B implies: M D 5 + M beam 5 FA 1 = 0 00 5 + 550 5 FA = = 145.8 N 146 N 1 A) 146 N B) 41 N C) 501 N D) 315 N E) 185 N Q4. At what height above earth s surface would the gravitational acceleration be 0.980 m/s? A) 1.38 10 7 m B) 1.1 10 7 m C) 7.1 10 7 m D) 5.8 10 8 m E) 4.05 10 8 m GM g GM / R E = = h = 10R R = 1.38 10 ( RE + h) 10 10 = 1.37737 107 m E E 7

Term: 111 Tuesday, January 10, 01 Page: 3 Q5. In Figure 4, what is the net gravitational force exerted on the 5.00 kg uniform sphere by the other two uniform spheres? The gravitational force is attractive: M 0.1 M 10 11 0.1 10-9 F = F1 + F = GM 5 + 6.67 10 5 +3.54 10 N r = + = 0.1 r 10.4 1 = 3.54344 10 9 A) 9 + 3.54 10 î N B) 11 +.3 10 î N C) 11.3 10 î N D) 13 1.45 10 î N E) + 1.45 10 i N 13 ˆ

Term: 111 Tuesday, January 10, 01 Page: 4 Q6. A rocket is launched from the surface of a planet of mass M =.0 10 8 kg and radius R = 5.35 10 6 m. What minimum initial speed is required if the rocket is to rise to a height of 6R above the surface of the planet? (Neglect the effects of the atmosphere). Conservation of total energy implies: 1 GmM GmM mv = 0 R 7R v = = = R 7 5.35 10 7 11 8 GM 1 6.67 10. 10 1 5 (1 ) (1 ) 6.86 10 m/s 6 A) 6.86 10 5 m/s B) 3.44 10 5 m/s C).18 10 6 m/s D) 8.0 10 6 m/s E) 9.45 10 5 m/s = 685708. Q7. A satellite of mass 00 kg is placed in Earth orbit at height of 00 km above the earth surface. How long does the satellite take to complete one circular orbit? 4π T = ( RE + h) GM E 3 A) 1.47 hours B).77 hours C) 8.14 hours D) 9.56 hours E) 7.38 hours = 1.47168

Term: 111 Tuesday, January 10, 01 Page: 5 Q8. In a hydraulic press, shown in Figure 5, the large piston has a cross sectional area of A 1 = 150 cm and mass m 1 = 450 kg. The small piston has a cross sectional area of A = 10 cm and mass m. If the height difference between the two pistons is 1.0 m, what is the mass m? [Note: The fluid in the hydraulic press is water] A) 9 kg B) 33 kg C) 15 kg D) 40 kg E) 11 kg The pressures at points A and B must be the same so that p (due to A 1 ) = p (due to A ) + p (due to water height of 1.0 m) 450 9.8 m 9.8 3 = + (1.0 10 )(9.8)(1) 4 4 150 10 10 10 m = 9 kg

Term: 111 Tuesday, January 10, 01 Page: 6 Q9. Figure 6 shows an open-tube manometer containing water and mercury. The height of water in the left column above the interface A is 30 cm while the height of mercury in the right column above B is 0 cm. The right column is open to the atmosphere P o. Find the pressure P in the bulb. (Take P o = 1.01 10 5 Pa and ρ (mercury) = 1.36 10 4 kg/m 3 ). The pressures on either side of the junction must be equal. This requires: p + ρ gh = p + ρ gh 1 1 o 3 5 3 p + (1.0 10 )(9.8)(0.3) = (1.01 10 ) + (13.6)(1.0 10 )(9.8)(0.) A) 1.5 10 5 Pa B) 0.55 10 5 Pa C) 0 D) 4.9 10 5 Pa E).46 10 5 Pa p = = 5 5 1.498 10 N/m 1.5 10 Pa

Term: 111 Tuesday, January 10, 01 Page: 7 Q10. A rectangular block, of area A and mass 500 kg, floats in still water with its submerged depth d 1 = 60.0 cm. When a man stands on the block, the submerged depth of the block becomes d = 7.0 cm (see Figure 7). What is the man s mass? Using the equilibrium conditions ρw Ad1g = Mg ρw Adg = ( M + m) g Dividing the above two equations and solve for m one finds: d 7. m = 1 M = 1 500 = 100 kg d1 6.0 A) 100 kg B) 00 kg C) 150 kg D) 500 kg E) 50 kg

Term: 111 Tuesday, January 10, 01 Page: 8 Q11. Figure 8 shows a pipe of uniform cross section in which water is flowing. The directions of flow and the volume flow rates (in cm 3 /s) are shown for various portions of the pipe. The direction of flow and the volume flow rate in the portion marked F are: A) B) C) D) E) and 9 cm / s 3 and 7 cm / s 3 and 3 cm / s 3 and 6 cm / s 3 and 15 cm / s 3

Term: 111 Tuesday, January 10, 01 Page: 9 Q1. 3 3 A closed large tank containing a liquid of density ρ = 1.50 10 kg/m has a small hole in its side (See Figure 9) and is open to the atmosphere, P o. The air above the liquid is maintained at a pressure of P = 3 P o. Determine the speed, v 1, of the liquid as it leaves the hole when the liquid s level is at a height h = 3.00 m above the hole. (take 5 P = 1.01 10 Pa ) o Because area at P >> area at Po, the liquid is approximately at rest at the top of the tank. Applying Bernoulli s equation at the top of the liquid and at the hole, we have: 1 P + ρv + ρgy = P + ρgy o v 1 1 ( P P ) v = + gh, h = y y ρ 5 4(1.01 10 )(9.8) 1 3 0 1 1 = + 9.8 3 = 18.1 m/s 1.5 10 A) 18.1 m/s B) 1.7 m/s C) 9.1 m/s D) 10.5 m/s E) 5.50 m/s

Term: 111 Tuesday, January 10, 01 Page: 10 Q13. A simple harmonic oscillator has amplitude of 3.50 cm and a maximum speed of 8.0 cm/s. What is its speed when the displacement of the oscillator is 1.75 cm? A) 4. cm/s B) 1.0 cm/s C) 14. cm/s D) 15.0 cm/s E) 17.0 cm/s X m = 3.50 cm, ωx = 8 cm/s ω=8, m v= ω X m X = 8 0.035 0.017 = 0.4 m/s Q14. A.0 kg block on a frictionless horizontal table is connected to two springs whose opposite ends are fixed to walls, as shown in Figure 10. If the spring constants k 1 = 7.6 N/m and k = 5.0 N/m, what is the angular frequency of oscillation of the block? When displaced from equilibrium, the net force exerted by the springs is ( k1+ k ) x = keff x acting in a direction so as to return the block to its equilibrium position (x = 0). Since the acceleration a = d x / dt, Newton s second law yields d x = ( 1+ ) m k k x dt A).5 rad/s B) 3.5 rad/s C) 0.56 rad/s D) 0.40 rad/s E) 1.3 rad/s

Term: 111 Tuesday, January 10, 01 Page: 11 Q15. The position of a.00 kg block, attached to spring and executing simple harmonic motion, is given by the equation: 1 x = 1.3 cm cos 1.6 s t. ( ) ( ) where t is the time in seconds. What is the total mechanical energy of the spring-block system at t = 0.815 s? 1 x = ( 1.3 cm) cos ( 1.6 s ) t dx 1 v = = ( 1.3 1.6) sin ( 1.6 s ) t = 15.498 sin(1.6 0.815 rad) = dt (*Problem 15 *) = -0.13616 = 0.0636493 = 0.040188 A).40 x 10 - J B) 4.48 x 10 - J C) 1.1 x 10 - J D) 8.96 x 10 - J E) 6.7 x 10 - J

Term: 111 Tuesday, January 10, 01 Page: 1 Q16. A simple pendulum of length L and mass M has frequency f. In order to increase its frequency to f we have to: A) decrease its length to L/ 4 B) increase its length to L C) decrease its length to L/ D) increase its length to 4L E) decrease its mass to M/4 Q17. The value of î ( kˆ ĵ ) is: ˆi kˆ ˆj = ˆi -i ˆ = 1 ( ) ( ) A) 1 B) +1 C) zero D) 3 E) î

Term: 111 Tuesday, January 10, 01 Page: 13 Q18. An object is moving along a straight line in the positive x direction. Figure 11 shows its position from the starting point as a function of time. Various segments of the graph are identified by the roman numerals I, II, III, and IV. Which segment(s) of the graph represent(s) a constant velocity of +1.0 m/s? A) IV B) II C) III D) I E) I and III

Term: 111 Tuesday, January 10, 01 Page: 14 Q19. A rock is thrown horizontally at a speed of 0 m/s from the edge of a cliff of height H. The rock strikes the ground 35 m from the foot of the cliff as shown in Figure 1. What is the height H of cliff edge? Neglect air resistance. 35 = 0t t = 3.5/ ; 1 H = gt = 4.9(1.75) = 15 m A) 15 m B) 11 m C) 1 m D) 17 m E) 19 m

Term: 111 Tuesday, January 10, 01 Page: 15 Q0. Figure 13 shows a particle P moving in a horizontal circle with uniform angular velocity about the origin of an xy coordinate system. At what values of θ, the y-component of the particle acceleration a y have maximum magnitude. (θ is measured counter clockwise from the positive x-axis) A) 90 and 70 B) 0 and 90 C) 90 and 180 D) 0 and 180 E) 0 and 70 Q1. Figure 14 shows four blocks connected with three cords, being pulled to the right on a horizontal frictionless floor by a horizontal force F. Rank the cords according to their tension, Greatest to least. A) 3,,1 B) All tie C),1,3 D) 1 and tie then 3 E) 1,3, a = = 0 / 0 1 m/s ; a = 0 T T = 18 N; 3 3 5a = 18 T T = 13 N; 10a = 13 T T = 3 N; 1 1

Term: 111 Tuesday, January 10, 01 Page: 16 Q. In Figure 15, blocks A and B have masses of m A = 5.0 kg and m B = 5.0 kg, respectively. Find the magnitude of the acceleration of mass A if the coefficient of kinetic friction between the block A and the horizontal table is 0.0 k pulley is massless and frictionless. µ =. Assume the The equation of motion for the system will be: ( ) M A + M B a = M Bg f k = M Bg f k = M Bg µ km Ag M Bg µ km Ag 1 1 a = = k = = A) 3.9 m/s B) 4.65 m/s C) 1.05 m/s D).57 m/s E) 9.80 m/s ( M + M ) A B ( 1 µ ) g ( 0.8) 9.8 3.9 m/s Q3. At time 0 t = a.0-kg particle has a velocity of ( ˆ ˆ) velocity is ( 5.0 ˆj ) m/s. During this time interval the work done on it was: A) 0 J B).0 J C) 5 J D) 50 J E) 1 J 4.0 i 3.0 j m/s. At t = 3.0 s its ( ) ( ) m m W = K = ( v ) 5.0 ˆj 4.0 ˆi 3.0 ˆ f v i = j = 0

Term: 111 Tuesday, January 10, 01 Page: 17 Q4. A block is moving along a frictionless horizontal track when it enters the circular vertical loop as shown in Figure 16. The block passes points 1,, 3, 4, 1 before returning to the horizontal track. Which one of the following statements describes the block at point 3 correctly? A) Its speed is a minimum B) The forces on it are balanced C) It is not accelerating D) Its mechanical energy is a minimum E) It experiences a net upward force Q5. A block of mass m = 4.0 kg, initially moving to the right on a horizontal frictionless surface at a speed v =.0 m/s, is heading towards a spring of spring constant k = 00 N/m. At the instant when the kinetic energy of the block is equal to the potential energy of the spring, the spring is compressed by a distance of: A) 0 cm B) 10 cm C) 15 cm D) 5.0 cm E) 100 cm 1 1 1 mv = kx + kx = kx mv 4 4 x = = = 0. m = 0 cm k 00

Term: 111 Tuesday, January 10, 01 Page: 18 Q6. A tennis ball of mass m = 0.060 kg and speed 5 m/s strikes a wall at 45 o angle and rebound with the same speed at 45 o as shown in Figure 17. What is the magnitude and direction of the impulse given to the ball? p = mv mv o o o = m( v sin 45 v sin 45 ) xˆ = mv sin 45 xˆ =.1 xˆ final initial A).1 kg.m /s, negative x-axis B) 5.4 kg. m/s, negative x-axis C) 1.0 kg.m/s, positive x-axis D).1 kg. m/s, positive y-axis E) 5.4 kg.m/s, negative y-axis Sec# Center of Mass and Linear Momentum - Collision and Impulse Grade# 50 Q7. If the total momentum of a system is changing: A) a net external force must be acting on the system B) particles of the system must be exerting forces on each other C) The center of mass must be at rest D) the center of mass must have constant velocity E) none of the other answers

Term: 111 Tuesday, January 10, 01 Page: 19 Q8. A disc, initially rotating at an angular speed of 10 rev/min about an axis passing through its symmetry axis, slows down with constant deceleration and stops 30 s later. How many revolutions did the disc make during this 30 s interval? ω+ ω o 10 + 0 30 θ = t = = 30 60 A) 30 B) 40 C) 10 D) 15 E) 5 Q9. A disk has a radius of 1.90 m. An applied torque of 96.0 N m gives the disk an angular acceleration of 6.0 rad/s about its central axis. What is the mass of the disk? 1 960 96.0 τo = Ioα = MR α M = = = R α 1.9 6. A) 8.58 kg B) 1.5 kg C) 14.3 kg D) 110 kg E) 17 kg 960 8.578 kg ( ) Q30. Figure 18 shows a hoop with mass M =.0 kg rolling without slipping on a horizontal surface so that its center proceeds to the right with a constant speed of 6.0 m/s. Which one of the following statements is true concerning the direction of angular momentum of this hoop about the contact point P? A) It points into the paper. B) It points out of the paper. C) It points to the left. D) It points to the right E) It points up.