Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial planar diode Fast switching diodes AEC-Q qualified Base P/N-E - RoHS-compliant, commercial grade Base P/N-HE - RoHS-compliant, AEC-Q qualified Material categorization: For definitions of compliance please see www.vishay.com/doc?999 PARTS TABLE PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS -E-08 or -E-8 -HE-08 or -HE-8 Single diode A Tape and reel ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 7 V Repetitive peak reverse voltage V RRM 0 Average rectified current half wave rectification with resistive load () f 0 Hz I F(AV) ma Surge forward current t < s and T j = C I FSM 0 Power dissipation () P tot 00 mw Note () Valid provided that electrodes are kept at ambient temperature. THERMAL CHARACTERISTICS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Thermal resistance junction to ambient air () R thja 60 K/W Junction temperature T j C Storage temperature range T stg - 6 to + C Operating temperature range T op - to + C Note () Valid provided that electrodes are kept at ambient temperature Rev..0, -May- Document Number: 87 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage I F = ma V F V I F = 0 ma V F. V V R = 0 V I R na Leakage current V R = 7 V I R V R = 0 V I R 0 μa V R = 0 V, T j = C I R 0 Diode capacitance V F = V R = 0 V C D pf Voltage rise when switching ON Reverse recovery time Tested with 0 ma pulses, t p = 0. μs, rise time < 0 ns, f p = ( to 0) khz I F = ma, i R = ma, V R = 6 V, R L = 0 TYPICAL CHARACTERISTICS (T amb = C, unless otherwise specified) V fr. V t rr ns 0 I F (ma) - T j = 0 C T j = C P tot - Power Dissipation (mw) 00 0 0 77-0 V F (V) Fig. - Forward Characteristics 0 0 0 0 00 0 T amb - Ambient Temperature ( C) Fig. - Admissible Power Dissipation vs. Ambient Temperature T j = C f = khz. T j = C f = MHz.0 R f (Ω) C D (V R ) C D (0 V) 0.9 0.8 0.7 78 - - I F (ma) 0 6 8 70 V R (V) Fig. - Dynamic Forward Resistance vs. Forward Current Fig. - Relative Capacitance vs. Reverse Voltage Rev..0, -May- Document Number: 87 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
I R (na) 7 0 T j ( C) V R = 0 V 0 00 Fig. - Leakage Current vs. Junction Temperature I FRM (A) 0 I n = t P /T T = /f P t P n = 0 T t 0. 0. 0. 0. - - - - - 7 t P (s) I FRM Fig. 6 - Admissible Repetitive Peak Forward Current vs. Pulse Duration Rev..0, -May- Document Number: 87 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
PACKAGE DIMENSIONS in millimeters (inches): SOD- 0. (0.00) Cathode bar. (0.0) 0.8 (0.0) 0.0 (0.06) 0. (0.008) 0. (0.006) 0. (0.00) max. 0.0 (0.06) 0. (0.0) 0 to 8.9 (0.077).60 (0.06) 0.0 (0.008).8 (0.).0 (0.098). (0.09). (0.0) Foot print recommendation: 0.6 (0.0) 0.6 (0.0) Document no.:s8-v-9.0-00 () Created - Date:.August.00 Rev. - Date:.Sept.009 7.6 (0.06) 0.6 (0.0) Rev..0, -May- Document Number: 87 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 0/6/EU of The European Parliament and of the Council of June 8, 0 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 00/9/EC. We confirm that all the products identified as being compliant to Directive 00/9/EC conform to Directive 0/6/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 69-- definition. We confirm that all the products identified as being compliant to IEC 69-- conform to JEDEC JS709A standards. Revision: 0-Oct- Document Number: 900