General Specifications Model PR10 ph Retractable fitting On-line measurements always present extra challenges compared to at-line measurements. For example when maintenance needs to be done. pplications where the sensors has to be removed without interruptions or shut-downs the PR10 is especially suitable. Without any special tools the PR10 can be retracted safely from the process up to 5 bar. For easy of use optional flush ports are available. In the retracted position the sensor can be kept moist, cleaned or even calibrated. This can all be done without process interruption or disassembly of the armature. The model PR10 can be adapted for use with ph electrodes with PG13,5 connection by changing only one part of the retractable assembly. lso Yokogawa s FU20 sensors with 3/4 NPT thread can be used with optional adapters. Features One model for ph, conductivity and inductive conductivity sensors Integrated protection cage uild in scraper to avoid contamination of the fitting Usable for wide range of sensors safe through the valve insertion and retraction design Simplified installation by optional ball valves with flanged or tapered connections Optional flush port for keeping moist, cleaning and calibration vailable in Stainless Steel and with Titanium shaft cage and adapters for more harsh applications GS 120603-01- 7th dition
2 General Specifications. Wetted materials - For sensor check Instruction Manual - Stainless steel ISI 316 / Titanium - O-ring seals: Viton 70 shore. Non-wetted materials - For sensor check Instruction Manual - Stainless steel ISI 316, 304 - Polypropylene glass filled C. Insertion length - Ref. mechanical drawing Figure 2.. Pressure/temperature ratings - Static conditions: see Figure 1. - Operating conditions during extraction and insertion max. 500kPa, max. 100 C. Flange ratings: - IN flange N32 PN10 - NSI flange 1¼ 150 lbs F. Specifications of the sensor used - Please check sensor specifications G. Weight - pprox 2.5 kg excl. ball valve H. Specifications of the sensor used YP ph sensors ll SC21 sensors (PG13,5 connector) and can be used with the standard spare part cable (see table 1). ll sensors (YF connector) spare part cable is needed to fit in the PR10. Maximum sensor length is 120 mm FU20(f) sensor of YP in fitting with FU20 option ph senbsor with 3/4 NPT thread and variopin connector (FU20-like) Competitor ph sensors ll ph sensors with PG13,5, VP or Smart connector with a max sensor length of 120 mm can be used (see table 1 and 2 for yokogawa sensors). Table 1 Specifications Combined ph lectrodes (non-flow) Type Membrane Resistance ph-range Temp. Pressure Reference Reference aphragm Flow in MΩ/25ºC range (ºC) range kpa liquid system SC21()-GP24 Universal 50-100 0-14 0-80 1-500 3.3 m. CI g/gcl (wire) Porous PTF 0 ph-glass bulb Thickened Silver-silverchloride SC21()-SP23 ow ohmic 40-100 0-10 0-80 1-500 3.3 m. CI g/gcl (wire) Porous PTF 0 ph-glass bulb Thickened Silver-silverchloride SC21()-P26 Chem. res. ph-glass bulb 250-400 0-14 0-110 1-500 Oversatured g/gcl (wire) Porous PTF 0 steam-sterrillisable 3/4 bulb CI thickened Silver-silverchloride SC21()-P26 Chem. res. 500-900 0-14 10-120 1-500 Oversatured g/gcl (wire) Porous PTF 0 ph-glass dome CI thickened Silver-silverchloride SC21()-GP26 Universal 120-200 0-14 -10-100 1-500 Oversatured g/gcl (wire) Porous PTF 0 ph-glass bulb CI thickened Silver-silverchloride SC21(C)-GP64 Universal 50-100 0-14 0-80 1-500 3.3 m. CI g/gcl (wire) Porous PTF 0 ph-glass bulb Thickened Silver-silverchloride SC24V-N26 Chem.res. 400-1000 4-14 0-120 0-1000 g/gcl Salt sensitive glasss - 0 ph glass dome SC25V-GP25 Universal 225 0-14 -10-80 0-1000 Cl saturated g/gcl double - 0 ph- glass bulb with g+-trap junction SC25V-P25 Chem.res. 600 0-14 15-130 0-1000 Cl saturated g/gcl double - 0 ph glass bulb with g+-trap junction Note 1: with connector No Temperature compensation is possible Note 2: with YF connector PR20 cable is needed with integral T sensor 1520P, 1520Q, 1520S and 1520T. Table 2 Specifications Redox lectrodes Type Temperature Process Metal range pressure surface SM29-PT9 0-130ºC max. 1000 kpa Platinum SC29C()-PTP29-10 - 100ºC max. 500 kpa Platinum SC29-PTG29 0-100ºC max. 1000 kpa Platinum Note 1: with connector No T comp. is possible bar 12 10 ISI 316 8 6 4 2 0 10 20 30 40 50 60 70 80 100 120 140 160 FIG. 1 Pressure / Temperature graphic GS 120603-01-
3 Table 3 Model- and suffix codes Model Suffix Options escription PR10 Retractable fitting general purpose Material fitting -S Stainless steel -T Titanium (tube and sensor holder only) Material O-rings -V Viton Tube length -5 Tube length 0.5 meter Connection -32 N32 / 1¼ -50 N50 / 2 Measuring sensor -PH12 For 12mm ph sensors Y-cap -PH13 For 12mm ph sensors PG13.5 cap -SC4 For SC4 -ISC4 For ISC40 -NNNN No parameter specification -FU20 For FU20 / FU20F g Only for -S dapter screw-in /S125 ISO 228/1 G1¼ to 1¼ M-NPT Only available /S125 ong ISO 228/1 G1¼ to 1¼ M-NPT in Stainless Steel /S200 ISO 228/1 G2 to 2 M-NPT /S200 ong ISO 228/1 G2 to 2 M-NPT Flange adapter /F125 Flange adapter drain 1¼ 150 bs Only available /FN125 Flange adapter no drain 1¼ 150 bs in Stainless Steel /F125 ong flange adapter drain 1¼ 150 bs /F200 Flange adapter drain 2 150 bs /FN200 Flange adapter no drain 2 150 bs /F200 ong flange adapter drain 2 150 bs /F32 Flange adapter drain N32 /FN32 Flange adapter no drain N32 /F50 Flange adapter drain N50 /FN50 Flange adapter no drain N50 dapter weld-in /W125 Straight weld-in adapter ISO 228/1 G1¼ Only available in Stainless Steel /W200 Straight weld-in adapter ISO 228/1 G2 all-valves /F125 all-valve flanged 1¼ 150 bs Only availablein Stainless Steel /F200 all-valve flanged 2 150 bs With all-valves /F32 all-valve flanged N32 PN10 flange adapters /F50 all-valve flanged N50 PN10 or screw-in adapters /S125 all-valve screw-in 1¼ F-NPT are necessary. /S200 all-valve screw-in 2 F-NPT Certificates /M Material certificate 3.1 according to NN-N 10024 (on wetted parts). *With all-valves flange adapters or screw-in adapters are necessary. GS 120603-01-
4 mensions unit mm (inches) 381 (15") 110 PR10-..-..-...-32.-PH.../S125/S125 414 (16.3") 54 PR10-..-..-...-32-PH.../F..125/F125 PR10-..-..-...-32-PH.../F..32/F32 520 (20.5") PR10-.. -V-5-32-PH12 PR10-.. -V-5-32-PH13 FIG. 2 mensional drawing PR10...-32 with mounted ph12 + ph13 sensor GS 120603-01-
5 unit mm (inches) FIG. 3 mensional drawing PR10...-32 with mounted FU20 sensor GS 120603-01-
6 mensions unit mm (inches) FIG. 4 mensional drawing PR10...-50 with mounted FU20 sensor GS 120603-01-
7 Options PR10 C C F G C C C g C F F G g G g b FIG. 5 mensions of the PR10 options Table 4 mensions options in mm (inches) C g Option escription Fig. C b g /S125 ISO 228/1 G1¼ to 1¼ M-NPT ISO 228/1 - G1¼ 1¼ NPT 60 ( 2.4 ) /S125 ong ISO 228/1 G1¼ to 1¼ M-NPT ISO 228/1 - G1¼ 1¼ NPT 170 (6.7 ) /F125 Flange adapter drain 1¼ 150 bs, G ISO 228/1 - G1¼ 69.5 ( 2.7 ) 66 ( 2.6 ) 29 ( 1.1 ) 15.7 ( 0.6 ) 117.3 ( 4.6 ) 1/8 NPT 47 ( 1.9 ) 15.7 ( 0.6 ) 88.9 ( 3.5 ) /F125 ong flange adapter drain 1¼ 150 bs, G ISO 228/1 - G1¼ 69.5 ( 2.7 ) 170 (6.7 ) 86 (3.4 ) 15.7 ( 0.6 ) 117.3 ( 4.6 ) 1/8 NPT 47 ( 1.9 ) 15.7 ( 0.6 ) 88.9 ( 3.5 ) /FN125 Flange adapter no drain 1¼ 150 bs C, G ISO 228/1 - G1¼ 69.5 ( 2.7 ) 66 ( 2.6 ) 29 ( 1.1 ) 15.7 ( 0.6 ) 117.3 ( 4.6 ) 47 ( 1.9 ) 15.7 ( 0.6 ) 88.9 ( 3.5 ) /F32 Flange adapter drain N32, G ISO 228/1 - G1¼ 69.5 ( 2.7 ) 66 ( 2.6 ) 29 ( 1.1 ) 16 ( 0.6 ) 140 ( 5.5 ) 1/8 NPT 47 ( 1.9 ) 18 ( 0.7 ) 100 ( 3.9 ) /FN32 Flange adapter no drain N32 C, G ISO 228/1 - G1¼ 69.5 ( 2.7 ) 66 ( 2.6 ) 29 ( 1.1 ) 16 ( 0.6 ) 140 ( 5.5 ) 47 ( 1.9 ) 18 ( 0.7 ) 100 ( 3.9 ) /W125 Straight weld-in adapter ISO 228/1 G1¼ ISO 228/1 - G1¼ 42 ( 1.7 ) 45 ( 1.8 ) /F32 all-valve flanged N32 PN10 F 60 ( 2.4 ) 140 ( 5.5 ) 32 ( 1.3 ) M16 100 ( 3.9 ) /F125 all-valve flanged 1¼ 150 bs F 60 ( 2.4 ) 118 ( 4.6 ) 32 ( 1.3 ) M14 89 ( 3.5 ) /S125 all-valve screw-in 1¼ F-NPT 1¼ NPT 110 ( 4.3 ) 32 ( 1.3 ) /S200 ISO 228/1 G2 to 2 M-NPT ISO 228/1 - G2 2 NPT 58 ( 2.3 ) /S200 ong ISO 228/1 G2 to 2 M-NPT ISO 228/1 - G2 2 NPT 177 (7 ) /F200 Flange adapter drain 2 150 bs, G ISO 228/1 - G2 101 ( 4 ) 77 ( 3 ) 32 ( 1.3 ) 20 ( 0.8 ) 165 ( 6.5 ) 1/8 NPT 73 ( 2.9 ) 19 ( 0.7 ) 120.7 ( 4.75 ) /F200 ong Flange adapter drain 2 150 bs, G ISO 228/1 - G2 101 ( 4 ) 177 (7 ) 86 (3.4 ) 20 ( 0.8 ) 165 ( 6.5 ) 1/8 NPT 73 ( 2.9 ) 19 ( 0.7 ) 120.7 ( 4.75 ) /FN200 Flange adapter no drain 2 150 bs C, G ISO 228/1 - G2 101 ( 4 ) 70 ( 2.8 ) 32 ( 1.3 ) 20 ( 0.8 ) 165 ( 6.5 ) 73 ( 2.9 ) 19 ( 0.7 ) 120.7 ( 4.75 ) /F50 Flange adapter drain N50, G ISO 228/1 - G2 101 ( 4 ) 77 ( 3 ) 32 ( 1.3 ) 20 ( 0.8 ) 165 ( 6.5 ) 1/8 NPT 73 ( 2.9 ) 19 ( 0.7 ) 125 ( 4.9 ) /FN50 Flange adapter no drain N50 C, G ISO 228/1 - G2 101 ( 4 ) 70 ( 2.8 ) 32 ( 1.3 ) 20 ( 0.8 ) 165 ( 6.5 ) 73 ( 2.9 ) 19 ( 0.7 ) 125 ( 4.9 ) /W200 Straight weld-in adapter ISO 228/1 G2 ISO 228/1 - G2 49 ( 1.9 ) 45 ( 1.8 ) /F200 all-valve flanged 2 150 bs F 82 ( 3.2 ) 150 ( 5.9 ) 50 ( 2 ) M16 121 ( 4.8 ) /F50 all-valve flanged N50 PN10 F 82 ( 3.2 ) 165 ( 6.5 ) 50 ( 2 ) M16 125 ( 4.9 ) /S200 all-valve screw-in 2 F-NPT 2 NPT 142 ( 5.6 ) 50 ( 2 ) g b g b GS 120603-01-
8 Table 5 Spareparts Part no. escription 1520P Cable retractable fitting 5M PT100 1520Q Cable retractable fitting 5M PT1000 1520S Cable retractable fitting 10M PT100 1520T Cable retractable fitting 10M PT1000 1525 Z Cable gland (5 pcs) 1525 Outer tube SS 1525 Sensor holder PG13.5 SS 1525F O-ring pick up tool 1525G dapter Y-cap 1525P dapter SC4-ISC40 SS 1525 O-ring set PR10-S-V-5-32 1525 O-ring set PR10-S-V-5-50 1525C ey set 1525 Squeezing set 1525 Set M16 bolt & washer (8 pcs) 1525F Set M14 bolt & washer (8 pcs) 1525G Gaskets ball valves - 50 1525H Gaskets ball valves - 32 1525J Gaskets ball valves - 50 + 2 1525 Gaskets ball valves - 1¼ 1525X OUTR TU SS FU20 1525Z Cable gland (5 pcs) 1525C Outer tube titanium 1525C Sensor holder PG13.5 Titanium 1525CP dapter SC4a-ISC40 Titanium 1525Y PR10/S125 1525Y PR10/F125 1525YC PR10/FN125 1525Y PR10/F200 1525Y PR10/FN200 1525YF PR10/F32 1525YG PR10/FN32 1525YH PR10/W125 1525YJ PR10/W200 1525Y PR10/F125 1525Y PR10/F200 1525YM PR10/F32 1525YN PR10/F50 1525YP PR10/S125 1525YR PR10/F50 1525YS PR10/FN50 1525YT PR10/S125 1525YU PR10/F125 1525YV PR10/S200 1525YW PR10/F200 1541M dapter 2 NPT - G2SS rain ports connection The PR10 retractable fitting can be equipped with optional drain (or flush) ports on the flanged adapter. The drain ports are tapered 1/8 NPT female for small diameter connectors. FIG. 6 rain Port Connection GS 120603-01-
9 PR10-S-V-5-32-FU20 PR10-S-V-5-32-NNNN PR10-S-V-5-32-PH12 PR10-S-V-5-32-PH13 PR10-S-V-5-32-SC4 PR10-S-V-5-50-FU20 PR10-S-V-5-50-ISC4 PR10-S-V-5-50-NNNN PR10-S-V-5-50-PH12 PR10-S-V-5-50-PH13 PR10-S-V-5-50-SC4 PR10-T-V-5-32-NNNN PR10-T-V-5-32-PH12 PR10-T-V-5-32-PH13 PR10-T-V-5-32-SC4 PR10-T-V-5-50-ISC4 PR10-T-V-5-50-NNNN PR10-T-V-5-50-PH12 PR10-T-V-5-50-PH13 PR10-T-V-5-50-SC4 /S125 X X X X /S125 X X X X X /S200 X X X X X X /S200 X X X X X X X /F125 X X X X /FN125 X X X X /F125 X X X X X /F200 X X X X X X /FN200 X X X X X X /F200 X X X X X X X /F32 X X X X /FN32 X X X X /F50 X X X X X X /FN50 X X X X X X /W125 X X X X X /W200 X X X X X X /F125 X X X X X /F200 X X X X X X /F32 X X X X X /F50 X X X X X X /S125 X X X X X /S200 X X X X X X /M X X X X X X X X X X X X X X X X X X X X GS 120603-01-
YOOGW CTRIC CORPORTION World Headquarters 9-32, Nakacho 2-chome, Musashino-shi Tokyo 180-8750 Japan www.yokogawa.com YOOGW CORPORTION OF MRIC 2 art Road Newnan G 30265 US www.yokogawa.com/us YOOGW CTRIC SI Pte. T. 5 edok South Road Singapore 469270 Singapore www.yokogawa.com/sg YOOGW CHIN CO. T. 3F Tower Cartelo Crocodile uilding No.568 West Tianshan Road Changing strict Shanghai, China www.yokogawa.com/cn Yokogawa has an extensive sales and distribution network. Please refer to the uropean website (www.yokogawa.com/eu) to contact your nearest representative. uroweg 2 3825 H mersfoort The Netherlands www.yokogawa.com/eu YOOGW MI ST.S.C.(c) P.O. ox 10070, Manama uilding 577, Road 2516, usaiteen 225 Muharraq, ahrain www.yokogawa.com/bh GS 120603-01- Subject to change without notice Copyright Printed in The Netherlands, 7-1703 () I