사양서 SPECIFICATION Product : White Top-View SMD LED (5060) Part No. : Date : 2009. 04. 13 Ver. 1.0 Proposed By Checked By Checked By Checked By Approval 결재완료 Comment Incheon Company : 58B-4L, 626-3 Gojan-dong, Namdong-gu, Incheon 405-817 KOREA TEL:+82-32-813-1910, FAX:+82+32-822-9009 Ochang Company : 9-4BL, Ochang Scientific Industrial Complex, 1115-4, Namchon-ri, Oksan-myeon, Cheongwon-gun, Chungbuk, 363-911, KOREA TEL:+82-43-218-1800, FAX:+ 82-43-218-1805, URL: http://www.itswell.com, Version of 1.0 PAGE : 1 / 12
1. Features High-Luminosity SMD LED 5.0 mm x 6.2 mm x 0.83 mm (W x L x H) Small Size Surface Mount Type Wide Viewing Angle Long Operating Life 2. Applications Automotive: Backlight in Dashboard and Switch General Lighting General Use Guard Lighting Street Lighting 3. Outline Drawing and Dimension Unit : mm Tolerance : ±0.1 6.2 3.59 1.99 0.62 1.55 5.0 1.90 1.55 <Top view> <Bottom view> 0.83 1 2 1 <Side view> 2 <Circuit diagram> Note 1. All dimensions are in millimeters 2. All dimensions without tolerances are for reference only Version of 1.0 PAGE : 2 / 12
4. Absolute Maximum Ratings ( Ta = 25 ) Parameter Symbol Value Unit Power Dissipation per Chip P d 1.51 W Continuous Forward Current I F 420 ma Peak Forward Current 1 I FP 700 ma Operating Temperature T opr -30 ~ +85 Storage Temperature T stg -40 ~ +100 Soldering Temperature T sol 260 (5sec) 1 Duty ratio = 1/10, Pulse width = 10ms 5. Electrical & Optical Characteristics (Ta : 25 ) Parameter Symbol Conditions Min. Typ. Max. Unit. Forward Voltage V F I F = 350mA 2.9 3.4 3.6 V Reverse Voltage V R I R = 5mA 0.7 0.8 1.5 V Color Coordinates 2 I F = 350mA x=0.2769 y=0.2190 - x=0.4820 y=0.4365 Correlated Colour Temperature 3 - I F = 350mA 2,600 30,000 K Luminous Flux 4 Φ V I F = 350mA 60-110 lm View Angle 5 I F = 350mA - 135-2θ 1/2 deg 2 and 3 Refer to 5.3 Color Coordinates Rank 4 Luminous Flux is measured with an integrating sphere and has an accuracy of 10%. 5 Viewing angle is the angle until 50% of brightness measured from the front part of LED. 5.1 Luminous Flux Rank (IF=350mA) Rank R S T U V Luminous Flux (lm) 60~70 70~80 80~90 90~100 100~110 Version of 1.0 PAGE : 3 / 12
5.2 Forward Voltage Rank Rank 0 1 2 3 4 5 6 Forward Voltage(V) 2.9 ~ 3.0 3.0 ~ 3.1 3.1 ~ 3.2 3.2 ~ 3.3 3.3 ~ 3.4 3.4 ~ 3.5 3.5 ~ 3.6 5.3 Color Coordinates Rank ( IF = 350 ma, Ta = 25 ) Rank Z Rank A Rank B Rank C Rank D 7000~6500 6500~6000 6000~5500 5500~5000 5000~4500 0.3102 0.2980 0.3060 0.3235 0.3162 0.3330 0.3257 0.3440 0.3345 0.3162 0.3060 0.3235 0.3330 0.3257 0.3440 0.3345 0.3582 0.3455 0.3100 0.3390 0.3204 0.3500 0.3320 0.3625 0.3460 0.3740 0.3640 0.3880 0.3037 0.3300 0.3110 0.3390 0.3204 0.3500 0.3320 0.3625 0.3460 0.3740 Rank E Rank F Rank G Rank H Rank J 4500~4200 4200~4000 4000~3800 3800~3600 3600~3400 0.3582 0.3455 0.3685 0.3530 0.3762 0.3578 0.3847 0.3630 0.3940 0.3690 0.3685 0.3530 0.3762 0.3578 0.3847 0.3630 0.3940 0.3690 0.4045 0.3740 0.3760 0.3960 0.3860 0.4042 0.3955 0.4075 0.4080 0.4140 0.4194 0.4192 0.3640 0.3880 0.3760 0.3960 0.3860 0.4020 0.3955 0.4075 0.4080 0.4140 Rank K Rank P Rank Q Rank R 3400~3200 3200~3000 3000~2800 2800~2600 0.4045 0.3740 0.4165 0.3800 0.4284 0.3850 0.4428 0.3900 0.4165 0.3900 0.4284 0.3850 0.4428 0.3900 0.4580 0.3940 0.4327 0.4240 0.4479 0.4295 0.4640 0.4335 0.4820 0.4365 0.4194 0.4192 0.4327 0.4240 0.4479 0.4295 0.4640 0.4335 Version of 1.0 PAGE : 4 / 12
Rank Z2 Rank A1 Rank A2 Rank B1 Rank B2 Rank C1 0.2708 0.2275 0.2795 0.2435 0.2880 0.2588 0.2960 0.2734 0.3058 0.2895 0.3060 0.2795 0.2435 0.2880 0.2588 0.2960 0.2734 0.3058 0.2895 0.3060 0.3235 0.2700 0.2575 0.2790 0.2745 0.2885 0.2917 0.3002 0.3110 0.3125 0.3300 0.3210 0.3430 0.2613 0.2405 0.2700 0.2575 0.2790 0.2745 0.2885 0.2917 0.3002 0.3110 0.3125 0.3300 Rank Z4 Rank A3 Rank A4 Rank B3 Rank B4 Rank C3 0.2769 0.2190 0.2850 0.2340 0.2932 0.2490 0.3005 0.2620 0.3095 0.2770 0.3180 0.2920 0.2850 0.2340 0.2932 0.2490 0.3005 0.2620 0.3095 0.2770 0.3180 0.2920 0.3248 0.3030 0.2795 0.2435 0.2880 0.2588 0.2960 0.2734 0.3058 0.2895 0.3060 0.3235 0.2708 0.2275 0.2795 0.2435 0.2880 0.2588 0.2960 0.2734 0.3058 0.2895 0.3060 Chromaticity Diagram Version of 1.0 PAGE : 5 / 12
6. Typical Characteristic Curve Forward Current(mA) Forward Current vs. Forward Voltage 1000 Relitive Luminous Intensity 100 10 2.5 3.0 3.5 4.0 4.5 Forward Voltage(V) Relative Luminous Intensity vs. Ambient Temperature 10 1 0.1 0 20 40 60 80 Lead Temperature( o C) Relative Luminous Intensity vs. Wavelength ( - Cold White - Cool white -- Warm White ) 1.0 DC Forward Current(mA) Relative Luminos Intensity(%) Forward Current vs. Ambient Temperature 500 450 400 350 300 250 200 R 150 th(j-a) =65 K/W R 100 th(j-a) =60 K/W R 50 th(j-a) =45 K/W R 0 th(j-a) =30 K/W 0 20 40 60 80 100 Ambient Temperature( o C) Relative Luminous Intensity vs. Forward Current 150 125 100 75 50 25 0 0 100 200 300 400 500 DC Fordward Current(mA) Radiation Diagram Relative intensity 0.8 0.6 0.4 0.2 0.0 400 500 600 700 800 Wavelength(nm) Version of 1.0 PAGE : 6 / 12
7. Dimension of Tape / Reel 7.1 Tape Dimension 7.2 Reel Dimension Version of 1.0 PAGE : 7 / 12
8. Packing Dimension Unit :mm 250 Bake: 60 C, 4hrs 220 Wheel Label Label Diameter : 180 mm Width : 12 mm M506 1,500 pcs/reel Shield Bag(Polyester/Al/LDPE) 1 Reel/Bag ( T = 0.1 mm ) with Silica gel Al Pack Label, Reel Label (70 37) Lot : VF[volt] LF [lm] CIE[x,y] MIN AVG MAX STD CHIP LED Label 226 Q ty : yyyy/mm/dd www.itswell.com 150 224 Maximum 10 Bags / 1Inner Box M506 15,000 pcs / 1 Inner Box Version of 1.0 PAGE : 8 / 12
9. Precaution in use 9.1 Soldering Conditions When soldering Power SMD, Heat may affect the electrical and optical characteristics of the LEDs. In soldering, do not stress the lead frame and the resin part under the high temperature. The silicone part should be protected from mechanical stress or vibration until the Power SMD return to room temperature after soldering. Preliminary heating to be at 160 max. for 120 Seconds max. Soldering heat to be at 260 max. for 5 sec. Max. For manual Soldering is Not more than 3 sec @MAX 350, under soldering iron < Lead Free > 1~5 /sec 1~5 /sec Pre-heating 140~160 120sec.Max. 60sec.Max. Above 220 260 Max. 5sec. Max. <Recommendable soldering pattern> 4.6 1.0 0.9 1.6 1.8 2.4 1.8 Unit: mm 6.0 9.2 Storage 8.1 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. The LEDs should be used within a year. After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. The LEDs should be used within 168 hours (7 day) after opening the package. If the moisture absorbent material (silicagel) has faded away or the LED have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60 ±5 for 24 hours. 9.3 Static Electricity Static electricity or surge voltage damages the Power SMD. It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. A tip soldering iron is requested to be grounded. An ionizer should also be installed where risk of static. All devices, equipment and machinery must be properly grounded (via 1MΩ). It is recommended that measures be taken against surge voltage to the equipment that mounts the Power SMD. 9.4 Cleaning Isopropyl Alcohol or Ethylene Alcohol is recommended in 5 minutes at room temperature. Don t use unspecified chemical may cause crack or haze on the surface of the epoxy resin. Before cleaning, a pre-test should be done to confirm whether any damage to the LED will occur. Freon solvents should not be used to clean the LEDs because of worldwide regulations. 9.5 Heat generation When the LEDs are illuminating, operating current should be decided after being considering the ambient maximum temperature. Please consider the heat generation of the LED when it is designed the PCB. The LED s must be mounted on MCPCB or heat sink or applied thermal pad. Version of 1.0 PAGE : 9 / 12
10. Reliability 10.1 Reliability Test Item Test Items Test Conditions Notes Resistance to Soldering Heat Test (Reflow Soldering) 260, 5sec. (2 times) 0/25 Solderability (Reflow Soldering) 215 ± 5, 3sec. (1 time. Over 95%) 0/25 High Temperature Storage 100, 1,000hr. 0/25 Low Temperature Storage -40, 1,000hr. 0/25 Temp. Humidity Storage 60, 90% RH, 1,000hr. 0/25 Steady State Operating life High Temperature Operating Life Low Temperature Operating Life Steady State Operating life Of High Humidity Heat 25, 420mA, 1,000hr. 85, 160mA, 1,000hr -30, 350mA, 1,000hr. 60, 90% RH, 285mA, 1,000hr. 0/25 0/25 0/25 0/25 Thermal Shock ESD -40 (30min) 100 (30min.), 100 cycle HBM, 100 pf, 1.5 kohm, 3 times 0/20 0/20 * Thermal resistance of LED with ITSWELL circuit board: R ja = 60 K/W 10.2 Criteria for Judging the Damage Items Luminous Intensity ( IV ) Forward Voltage ( VF ) Test Conditions I F = 350mA I F = 350mA Criteria for judgment > 70% of S Less than 110% of U * U means the upper limit of specified characteristics, S means initial value. Version of 1.0 PAGE : 10 / 12
11. Part Name Description I W S M 506 UW UW : White Color 506 : 5.0 mm x 6.2 mm x 0.83 mm(t) dimension M : Metal Type Package S : SMD type LED IT : Company Name, ITSWELL Co., Ltd. 12. Rank Description T B 4 Voltage Rank Color Coordinates Rank Luminous Flux Rank 13. Attention : Electric Static Discharge (ESD) Protection The symbol shown on the page herein to introduce Electro-Optical Characteristics. ESD protection for GaP and AlGaAs is based chips is still necessary even though they are safe in low static-electric discharge. Material in AlInGaP, GaP, or/and InGaN based chips are STATIC SENSITIVE devices. ESD protection has to considered and taken in the initial design stage. If manual work/process is needed, please ensure the device is well protective from ESD during all the process. LED s ESD Level is Class II and The range of Forward Voltage is 2000V ~ 3999V. Version of 1.0 PAGE : 11 / 12
Spec. Review History Review Ver. Date Correction List Etc. Ver 1.0 2009.04.13 Establish Version of 1.0 PAGE : 12 / 12