DESCRIPTION A LED module for use with separate control gear and suitable for field replacement. The compact light emitting surface when combined with primary optics produce tight, controlled beams of light, ideal for accent and downlighting applications. Available in various CRI, CCT and lumen values. Use where color quality, consistency and optical control are required. Catalog # Project Comments Type Date Prepared By SPECIFICATION FEATURES Mechanical A Zhaga Book 3 compliant 50mm diameter LED module with 8.2mm light emitting surface (LES 9) intended to attach to the heat sink of the luminaire. Thermal Interface Material Use with die cut graphite thermal interface material (provided) to ensure effective heat transfer between the LED module and heat sink. Electrical Interface Integral 8-pin connector provides power to the LED array and connections to Rset and NTC providing compatibility with Xitanium drivers. Optical A high density LED array comprised of 24 die on a ceramic substrate providing a small, uniform, single point source for precise optical control without pixilation. Output is essentially Lambertian with a viewing angle of 115 (FWHM) allowing the luminaire optics to define the shape of light distribution. Available in 2700, 3000, 3500 and 4000 K in CRI 80 and CRI 90, refer to ordering table for available CRI/CCT combinations. Color accuracy within 2 SDCM initial and 3 SDCM at rated life provides excellent color uniformity and stability unit to unit and over time. Luminous Flux Delivered module lumens are dependent on various factors including CRI, CCT, driver current and thermal droop. All measurements are based on given drive current and tested at 85 C. Compliance culus recognized and suitable for damp locations. CE marked. Class 2 input only. Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11. Zhaga compliant. Warranty 5 year warranty when used in an approved luminaires. ZLM03 LED Module 50mm Diameter LES 9 900 and 1,200 Lumen Series 35mm (1.378) 7.2mm (.28) 45 50mm (1.97) Cooper Lighting is a founding member of the Zhaga Consortium
ORDERING INFORMATION Example: Configuration LES Luminous Flux CRI/CCT Accessories ELM03 ZLM03 = LED module, Zhaga Book 3 compliant 09 = 8.2mm light emitting surface 12 = 1,200 lumens nominal (See table) 09 = 900 lumens nominal (See table) 827 = 80 CRI Minimum, 2,700 K CCT 927 = 90 CRI Minimum, 2,700 K CCT 830 = 80 CRI Minimum, 3,000 K CCT 930 = 90 CRI Minimum, 3,000 K CCT 835 = 80 CRI Minimum, 3,500 K CCT 840 = 80 CRI Minimum, 4,000 K CCT TIM50 = Replacement die cut 50mm Zhaga Book 3 graphite thermal interface material Catalog Number Drive Current Zhaga Luminous Flux Category Luminous Flux CCT CRI LES Minimum Nominal Category Light Emitting Surface ZLM030912827 340mA C008 940 980 450mA C011 1130 1170 2700 K ZLM030912830 ZLM030912835 ZLM030912840 340mA C011 1000 1040 450mA C011 1170 1220 340mA C011 1100 1140 450mA C011 1330 1390 340mA C011 1170 1210 450mA C011 1250 1300 3000 K 3500 K 4000 K 80 LES 9 8.2mm ZLM030909927 ZLM030909930 340mA C008 770 800 450mA C008 920 950 340mA C008 800 830 450mA C008 990 1030 2700 K 3000 K 90 SPECTRAL POWER DISTRIBUTION Color rendering index (CRI) is an incomplete metric for many source technologies, especially LED. It is possible to overstate CRI for LED sources without improving the color rendering across the visible spectrum. Consider CRI, spectral power distribution (SPD) and real world performance to determine suitability for a given application. ZLM030912827 81 80 92 95 78 80 91 81 56 6 81 76 76 82 98
ZLM030912927 90 89 95 99 88 89 95 90 77 51 88 87 82 91 99 ZLM030912830 81 79 89 97 79 79 86 83 59 7 75 76 69 82 98
ZLM030909930 90 90 95 98 88 89 93 91 78 52 87 86 79 91 99 ZLM030912835 82 80 89 96 79 80 86 85 62 10 74 77 65 82 98
ZLM030912840 81 79 86 91 80 79 80 86 65 9 66 77 60 80 95