DM7404 Hex Inverting Gates

Similar documents
DM7417 Hex Buffers with High Voltage Open-Collector Outputs

DM74LS08 Quad 2-Input AND Gates

DM Quad 2-Input NAND Buffers with Open-Collector Outputs

DM74LS02 Quad 2-Input NOR Gate

DM74LS05 Hex Inverters with Open-Collector Outputs

DM74LS09 Quad 2-Input AND Gates with Open-Collector Outputs

DM74LS74A Dual Positive-Edge-Triggered D Flip-Flops with Preset, Clear and Complementary Outputs

DM74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Connection Diagram. Logic Diagram. Function Table (Each Latch)

DM74ALS109A Dual J-K Positive-Edge-Triggered Flip-Flop with Preset and Clear

74F30 8-Input NAND Gate

DM Bit Addressable Latch

74F174 Hex D-Type Flip-Flop with Master Reset


CD4028BC BCD-to-Decimal Decoder

74F153 Dual 4-Input Multiplexer

DM74LS670 3-STATE 4-by-4 Register File

DM74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver

DM74S373 DM74S374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops

74F139 Dual 1-of-4 Decoder/Demultiplexer

CD4028BC BCD-to-Decimal Decoder

74F537 1-of-10 Decoder with 3-STATE Outputs

CD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate

MM74C906 Hex Open Drain N-Channel Buffers

CD4024BC 7-Stage Ripple Carry Binary Counter

DM74LS373 DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops

MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter

CD40106BC Hex Schmitt Trigger

74F109 Dual JK Positive Edge-Triggered Flip-Flop

MM74HCT08 Quad 2-Input AND Gate

MM74HC00 Quad 2-Input NAND Gate

MM74C14 Hex Schmitt Trigger

DM7490A Decade and Binary Counter

74F175 Quad D-Type Flip-Flop

MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter

DM74LS240 DM74LS241 Octal 3-STATE Buffer/Line Driver/Line Receiver

CD4049UBC CD4050BC Hex Inverting Buffer Hex Non-Inverting Buffer

MM74HC08 Quad 2-Input AND Gate

74F194 4-Bit Bidirectional Universal Shift Register

74F539 Dual 1-of-4 Decoder with 3-STATE Outputs

MM74HC154 4-to-16 Line Decoder

74F379 Quad Parallel Register with Enable

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop

DM7446A, DM7447A BCD to 7-Segment Decoders/Drivers

MM74HC32 Quad 2-Input OR Gate

MM74C14 Hex Schmitt Trigger

MM74HC139 Dual 2-To-4 Line Decoder

74AC08 74ACT08 Quad 2-Input AND Gate

MM74HC4020 MM74HC Stage Binary Counter 12-Stage Binary Counter

CD4093BC Quad 2-Input NAND Schmitt Trigger

Excellent Integrated System Limited

MM74HC244 Octal 3-STATE Buffer

MM74HC138 3-to-8 Line Decoder

CD4013BC Dual D-Type Flip-Flop

MM74HCT138 3-to-8 Line Decoder


74F283 4-Bit Binary Full Adder with Fast Carry

74F240 74F241 74F244 Octal Buffers/Line Drivers with 3-STATE Outputs

MM74HC175 Quad D-Type Flip-Flop With Clear

CD4528BC Dual Monostable Multivibrator

MM74HC164 8-Bit Serial-in/Parallel-out Shift Register

Low Power Quint Exclusive OR/NOR Gate

MM74HC251 8-Channel 3-STATE Multiplexer

MM74HC74A Dual D-Type Flip-Flop with Preset and Clear

CD4021BC 8-Stage Static Shift Register

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset

MM74HC259 8-Bit Addressable Latch/3-to-8 Line Decoder

CD4514BC CD4515BC 4-Bit Latched/4-to-16 Line Decoders

MM74HC373 3-STATE Octal D-Type Latch

MM74HC540 MM74HC541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer

CD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate

74VHC00 Quad 2-Input NAND Gate

MM74HCT540 MM74HCT541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer

74F269 8-Bit Bidirectional Binary Counter

MM74HC573 3-STATE Octal D-Type Latch

DM74LS11 Triple 3-Input AND Gates

74FR74 74FR1074 Dual D-Type Flip-Flop

DM74LS02 Quad 2-Input NOR Gates

DM7445 BCD to Decimal Decoders/Drivers

DM7442A BCD to Decimal Decoders

74VHC00 Quad 2-Input NAND Gate

MM74HC373 3-STATE Octal D-Type Latch

74AC153 74ACT153 Dual 4-Input Multiplexer

MM74HC374 3-STATE Octal D-Type Flip-Flop

74FR244 Octal Buffer/Line Driver with 3-STATE Outputs

DM7473 Dual Master-Slave J-K Flip-Flops with Clear and Complementary Outputs

74LS393 Dual 4-Bit Binary Counter

MM74HCT573 MM74HCT574 Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

74F Bit D-Type Flip-Flop

74ACT825 8-Bit D-Type Flip-Flop

DM74LS154 4-Line to 16-Line Decoder/Demultiplexer

74F138 1-of-8 Decoder/Demultiplexer

74AC138 74ACT138 1-of-8 Decoder/Demultiplexer

CD4511BC BCD-to-7 Segment Latch/Decoder/Driver

MM74HCT573 MM74HCT574 Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

Excellent Integrated System Limited

MM74HC161 MM74HC163 Synchronous Binary Counter with Asynchronous Clear Synchronous Binary Counter with Synchronous Clear

74F Bit Random Access Memory with 3-STATE Outputs

74LVQ138 Low Voltage 1-of-8 Decoder/Demultiplexer

Transcription:

DM7404 Hex Inverting Gates General Description This device contains six independent gates each of which performs the logic INVERT function. Ordering Code: August 1986 Revised February 2000 DM7404 Hex Inverting Gates Order Number Package Number Package Description DM7404M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM7404N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter X to the ordering code. Connection Diagram Function Table H = HIGH Logic Level L = LOW Logic Level Inputs A L H Y = A Output Y H L 2000 Fairchild Semiconductor Corporation DS006494 www.fairchildsemi.com

DM7404 Absolute Maximum Ratings(Note 1) Supply Voltage 7V Input Voltage 5.5V Operating Free Air Temperature Range 0 C to +70 C Storage Temperature Range 65 C to +150 C Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The Recommended Operating Conditions table will define the conditions for actual device operation. Recommended Operating Conditions Symbol Parameter Min Nom Max Units V CC Supply Voltage 4.75 5 5.25 V V IH HIGH Level Input Voltage 2 V V IL LOW Level Input Voltage 0.8 V I OH HIGH Level Output Current 0.4 ma I OL LOW Level Output Current 16 ma T A Free Air Operating Temperature 0 70 C Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Typ Symbol Parameter Conditions Min (Note 2) Max Units V I Input Clamp Voltage V CC = Min, I I = 12 ma 1.5 V V OH HIGH Level V CC = Min, I OH = Max Output Voltage V IL = Max 2.4 3.4 V V OL LOW Level V CC = Min, I OL = Max Output Voltage V IH = Min 0.2 0.4 V I I Input Current @ Max Input Voltage V CC = Max, V I = 5.5V 1 ma I IH HIGH Level Input Current V CC = Max, V I = 2.4V 40 µa I IL LOW Level Input Current V CC = Max, V I = 0.4V 1.6 ma I OS Short Circuit Output Current V CC = Max (Note 3) 18 55 ma I CCH Supply Current with Outputs HIGH V CC = Max 6 12 ma I CCL Supply Current with Outputs LOW V CC = Max 18 33 ma Note 2: All typicals are at V CC = 5V, T A = 25 C. Note 3: Not more than one output should be shorted at a time. Switching Characteristics at V CC = 5V and T A = 25 C Symbol Parameter Conditions Min Max Units t PLH Propagation Delay Time C L = 15 pf LOW-to-HIGH Level Output R L = 400Ω 22 ns t PHL Propagation Delay Time HIGH-to-LOW Level Output 15 ns www.fairchildsemi.com 2

Physical Dimensions inches (millimeters) unless otherwise noted DM7404 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com

DM7404 Hex Inverting Gates Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 4 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com

This datasheet has been downloaded from: www.datasheetcatalog.com Datasheets for electronic components.