PL-0B PLUG VALVE
ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valve and butterfly valve in carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the latest industry standards in accordance to ANSI, ASME and API. FBV today has over 00,000 square feet of manufacturing facilities. Through its conviction to provide only the finest quality products and services to match the need of our customers, FBV has now established itself as a serious player in the valve business. FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and the Middle East. We consider product quality and customer satisfaction our highest priority. We look forward to new customer relationships by providing value, quality, customer service, honesty, integrity and the commitment to maintain product consistency with each and every order. MISSION STATEMENT We at FBV, Inc. commit to taking ACTION: Adopt the latest technology to take the product quality to the next level; Consistently provide on-time services to our customers; Train and develop talented people with strong work ethics to deliver effective performance; Improve and enhance engineering designs to ensure product performance; Optimize management systems and increase productivity; Never forget our customers and employees needs.
TABLE OF INDEX PAGE Introduction, Features Scope of Products, Overview, Sleeved Type Dimensions and Weights, Sleeved Type Class 0 (PN ) Class (PN 0) Class 00 (PN 0) Overview, Pressure Balanced Type Dimensions and Weights, Pressure Balanced Type Class 0 (PN ) Class (PN 0) Class 00 (PN 0) Class 00 (PN 0) Seat and Seal Material, Selection Guide Valve Figure Number, How To Order
This page is intentionally left blank.
INTRODUCTION FEATURES PRESSURED BALANCED TYPE This type of plug valve has tapered plug that is installed from bottom to the valve body and is generally metal seated, which makes it good for high pressure high temperature services. The valves are provided with sealant injecting fittings on stem and plug. INTRODUCTION A plug valve is a valve with a Conical plug, the part of the valve which controls the flow through it. The plug has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. FBV produces Sleeved Type and Pressure Balanced Type plug valves. SLEEVED TYPE This type of plug valve has tapered plug that is installed to the body from top; it is generally soft seated type for which service temperature is limited by the kind of sleeve it uses. The maximum service temperature is about 0 o C, and the pressure is not high either. BLOWOUT PROOF STEM The valve stem is made with a shoulder at the bottom end. It s securely retained by the stuffing box, to avoid that the stem, under certain operating conditions, accidentally blows out. Other designs are available on request. ANTI-STATIC Because the plug and stem in a plug valve are suspended on non-metallic parts, i.e. the seat seal and stem seal, there is a possibility a static charge may build up on the stem-plug, is introduced in the design to maintain the metal-to-metal contact between the rotating plug/stem and the valve body which will ground any charges to the valve body.
SCOPE OF PRODUCTS Legends: Size in/mm ½ ¾ ½ 0 0 0 0 0 0 0 00 0 00 0 00 0 00 0 0 00 0 00 A Available in Casting and Forging B Available in Casting Only C Available Forging Only Class 0 PN Class PN 0 Class 00 PN 0 D Not Usually Required E Casting Not Recommended N Not Available Class 00 PN 0 Class 00 PN 0 Class 00 PN A A A A A A,E A A A A A A,E A A A A A A,E A A A A A A,E A A A A A A,E B B B B B B,E B B B B B B,E B,D B,D B,D B,D B,D B,D,E B B B B B B,E B B B B B B,E B B B B B B,E B B B B B B,E B B B B B N B B B B B N B B B B B N B B B B B N B,D B,D B,D B,D B,D N B B B B B N B,D B,D B,D B,D B,D N B,D B,D B,D B,D B,D N B B B B B N B B B B B N B,D B,D B,D B,D B,D N B B B B B N
OVERVIEW (SLEEVE TYPE) STANDARDS Design & manufacture API, API D, ISO, Face-to-face API D, ASME B. End Dimension Test & inspection API D, API Fire safe API FA, API 0 ASME B. (RF, RTJ), ASME B. (RF, RTJ) MSS SP- (NPS Only) ASME B.. (NPT) ASME B. (SW) ASME B. (BW) Other NACE MR 0-, MR 0 TYPICAL MATERIALS Body/Bonnet A, A F0, F0L, F, FL, F, F, A LF, LF, LF (Forging, for NPS ) A WCB, A CF, CF, CFM, CFM, A A, A, A LCB, LCC, LC, Monel, Inconel, Hastelloy (Casting) Plug CA, CS+ENP, A F0, F0L, F, FL, F, F, CS+TCC, CS+Ni0 Seat Stem Packing O-ring PTFE, RPTFE, PPL A Fa, F, F, A+ENP, AISI 0+ENP, -PH Graphite, PTFE, RPTFE Viton, NBR, HNBR, AFLAS
DIMENSIONS AND WEIGHTS (SLEEVE TYPE) ASME CLASS 0 ( PN ) ASME CLASS 0 (PN ) Size in/mm D RF RTJ BW ½ 0.... -. ¾ 0... -.... 0 ¼...0... 0 ½... 0. 0... 0 0. 0 ½.... 0..0 0. 0.. 0. 0.. 0.. 0.... 0. 0 0.. 0 0.. 0. 0... 0 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W.....0 0.. 0...... 0. 0 RF/RTJ (lb/kg).. 0 0 0 0 0 0 Weight
DIMENSIONS AND WEIGHTS (SLEEVE TYPE) ASME CLASS ( PN 0) ASME CLASS (PN 0) Size in/mm D RF RTJ BW ½ 0... 0.. ¾ 0....... ¼..... ½... 0. 0 0.... 0 0. 0 ½..... 0...0 0. 0.. 0. 0 0.. 0... 0. 0.... 0. 0.. 0... 0. 0 0 0 0. 0.. 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W.....0 0.. 0...... 0. 0 RF/RTJ (lb/kg).. 0 0 0 0 0 0 Weight
DIMENSIONS AND WEIGHTS (SLEEVE TYPE) ASME CLASS 00 (PN 0) ASME CLASS 00 (PN 0) Size in/mm D RF RTJ BW ½ 0...... ¾ 0...... 0 0 0..... ¼... ½..... 0. 0.... 0 0. 0 ½.... 0 0..0 0... 0. 0.. 0 0 0.. 0... 0. 0 0 0.. 0 0.. 0. 0... 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W.....0 0.. 0...... 0. 0 RF/RTJ (lb/kg) 0 0 0 Weight
OVERVIEW (Pressure Balance Type) STANDARDS Design & manufacture API, API D, ISO, Face-to-face API D, ASME B. End Dimension Test & inspection API D, API Fire safe API FA, API 0 ASME B. (RF, RTJ), ASME B. (RF, RTJ) MSS SP- (NPS Only) ASME B.. (NPT) ASME B. (SW) ASME B. (BW) Other NACE MR 0-, MR 0 TYPICAL MATERIALS Body/Bonnet A, A F0, F0L, F, FL, F, F, A LF, LF, LF (Forging, for NPS ) A WCB, A CF, CF, CFM, CFM, A A, A, A LCB, LCC, LC, Monel, Inconel, Hastelloy (Casting) Plug CA+Nitrding, CS+ENP, A F0, F0L, F, FL, F, F, CS+TCC, CS+Ni0 Stem Packing O-ring A Fa, F, F, A+ENP, AISI 0+ENP, -PH Graphite, PTFE, RPTFE Viton, NBR, HNBR, AFLAS
DIMENSIONS AND WEIGHTS (Pressure Balance Type) ASME CLASS 0 (PN ) ASME CLASS 0 (PN ) Size in/mm D RF RTJ BW ½ 0....0 -. 0 ¾ 0...0 -. 0.... 0 0 ¼...0... 0 0 ½... 0.... 0 0. ½.... 0 0.. 0. 0 0.. 0... 0.. 0.... 0. 0 00.. 0 0 0..0 0.... 0 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W. 00. 00. 00. 00. 00.. 00. 00...... 0. 0 RF/RTJ (lb/kg) 0 0 0 0 Weight
DIMENSIONS AND WEIGHTS (Pressure Balance Type) ASME CLASS (PN 0) ASME CLASS (PN 0) Size in/mm D RF RTJ BW ½ 0... 0..0 ¾ 0...0.... ¼..... 0 ½... 0. 0.... 0 0. ½..... 0 0... 0. 0 0.. 0. 0.. 0... 0. 0.... 0. 00.. 0 0...0 0. 0 0 0. 0.. 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W. 00. 00. 00. 00. 00.. 00. 00...... 0. 0 RF/RTJ (lb/kg) 0 0 0 0 0 Weight
DIMENSIONS AND WEIGHTS (Pressure Balance Type) ASME CLASS 00 (PN 0) ASME CLASS 00 (PN 0) Size in/mm D RF RTJ BW ½ 0......0 ¾ 0.....0. 0 0 0..... ¼... 0 ½..... 0..... 0 0. ½.... 0 0 0.. 0. 0.. 0... 0 0 0.. 0... 0. 0 0 00.. 0 0 0..0 0.... 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W. 00. 00. 00. 00. 00.. 00. 00...... 0. 0 RF/RTJ (lb/kg) 0 0 0 0 Weight
DIMENSIONS AND WEIGHTS (Pressure Balance Type) ASME CLASS 00 (PN 0) ASME CLASS 00 (PN 0) Size in/mm D RF RTJ BW ½ 0.....0.0 ¾ 0..0.0.0. 0.... ¼..... 0 ½.. 0. 0 0 0..... 0. ½...... 0... 0. 0... 0. 0... 0. 0... 0.... 0 0. 0 00... 0 0...0.. 0. 0. 0... 0 The dimension and weights are for reference only and subject to change without notice.. "W" is the O.D. of the handwheel for NPS and above, and length of lever/wrench for NPS. For more dimensional information, contact one of our representatives. L H W. 00. 00. 00. 00. 00.. 00. 00...... 0. 0 RF/RTJ (lb/kg) 0 0 0 0 0 Weight
SEAT AND SEAL MATERIAL Seat Material Pressure-Temperature Rating (Operating) SELECTION GUIDE SEAT MATERIALS Material Name Description Operating Temperature PTFE Virgin PTFE is the most widely used sealing material with excellent - o F o F characteristics suitable for most services. It has excellent chemical -0 o C 0 o C resistance throughout valve industries and low coefficient of frication. RPTFE RPTFE (Reinforced PTFE) is typically produced by adding % fiber glass - o F o F to virgin PTFE. It has better pressure-temperature properties than virgin -0 o C 0 o C PTFE, better resistance to wear and deformation under load. NOT to be used in hydrofluroic acid PCTFE PCTFE is a homopolymer of chlorotrifluoroethylene, featuring high - o F o F compressive strength and low deformation under load. - o C 0 o C Nylon Nylon is a common seat material for Class 00 valves. It is highly - o F o F resistance to many chemicals and abrasions, and can be used in air, oil -0 o C 0 o C and other gas media. It is NOT suitable for strong oxidization agents. Devlon Devlon is a high molecular weight polyamide that is specifically tailored -0 o F 0 o F for high temperature/pressure applications in the offshore oil and gas - o C 0 o C sector. It is low moisture absorption. Nylon+MoS Molon (Nylon+MoS) is a modified Nylon, the characteristics are similar to - o F o F Devlon with it is cheaper than Devlon. - o C 0 o C PEEK PEEK is a high performance engineered thermoplastic. It is excellent in - o F 00 o F water/chemical resistance and it is unaffected by continuous exposure to -0 o C o C hot water/steam PPL PPL (Polyparaphenylene) is an excellent seat material with low coefficient -0 o F o F of friction, highly resistant to pressure and temperature. - o C 0 o C Delrin TFM Metal Delrin (Acetal Resin) possesses high tensile strength, creep resistance -0 o F o F and toughness. It exhibits low moisture absorption. It is chemically - o C 0 o C resistant to hydrocarbons, solvents and neutral chemicals. DO NOT use it on oxygen service or steam. TFM (modified PTFE) is a chemically modified PTFE that offers enhanced properties while retaining all the proven advantages of a conventional PTFE. Metal (typically stellite) seats are used in severe conditions where flashing, hydraulic shock, abrasive media or trapped metal may exist in the line. - o F o F -0 o C 0 o C Operating Pressure Class 0 PN 0 Class 0 00 PN 0 Class 0 PN 0 Class 0 00 PN Class 0 00 PN Class 0 00 PN 0 Class 00 00 PN 0 Class 0 PN 0 Class 0 00 PN 0 Class 0 00 PN 0 Service Application General chemicals, low pressure services. For low and medium pressure services. For low temperature low pressure services. For high pressure, low temperature services. For high pressure high temperature offshore services. For high pressure, low temperature services. For high pressure high temperature services. For high temperature low pressure services. For extreme pressure services. For services requiring high purity. Varies Varies For severe services. O-RING MATERIALS Material Name Description Operating Temperature NBR Buna-N (NBR) is an all purpose polymer with good resistance to water, solvents, oil and -0 o F o F hydraulic fluids. - o C 0 o C HNBR HNBR (Hydrogenated NBR) has similar media stability to NBR but with significantly - o F o F better heat and oxidization stability. - o C 0 o C Viton EPDM FVMQ Viton (fluorocarbon) is a fluorocarbon elastomer that is compatible with a broad range of chemicals. It performs well in mineral acids, salt solutions, chlorinated hydrocarbons and petroleum oils EPDM has good abrasion and tear resistance with excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oil, strong acids and strong alkalines and should not be used in compressed air lines. Fluorosilcione is a silicone polymer chain with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone. - o F o F - o C o C -0 o F 0 o F - o C 0 o C -0 o F o F - o C o C AFLAS AFLAS is highly resistant to a wide range of chemicals - o F o F - o C o C Operating Pressure Class 0 00 PN 0 Class 0 00 PN 0 Class 0 00 PN 0 Class 0 00 PN 0 Class 0 00 PN 0 Class 0 00 PN 0
VALVE FIGURE NUMBER HOW TO ORDER Nominal Size Valve Type Pressure Rating End Conn. Construction Body Material Trim Material Seat O-ring Operation Mode A B C D E F G H I J e.g. P L R C 0 M G is a NPS Class 00, Plug Valve, RF flanged, Pressure Balanced Type, A WCB body, SS Trim, Metal Seat, Viton O-ring, Gear Operated. A Nominal Size 00 Special 0 (DN 0) 0 RB RB RB F / (DN ) R RB 0 (DN 0) (DN 00) (DN 00) F / (DN ) F ½ (DN ) 0 RB RB RB 0R / RB R ½ RB (DN 0) (DN 0) (DN 0) F / (DN ) 0 (DN 0) RB RB RB R0 / RB R RB (DN (DN 00) (DN 00) 0 (DN ) 0 (DN 0) RB RB RB R RB R RB (DN ) (DN 0) (DN 0) F ¼ (DN ) 0 (DN ) RB RB 0 RB R ¼ RB R RB (DN 00) (DN 00) 0 0 (DN 00) F ½ (DN 0) 0 (DN 0) RB 0 RB RB R ½ RB R RB (DN 0) 0 0 (DN 0) More as such B Valve Type C Pressure Rating D End Connection PL Plug Valve 0 Special Class 00 X Special B Butt-Weld (BW) Class 0 Class 00 R RF Flanged S Socket-Weld (SW) Class Class 00 J RTJ Flanged W Wafer Class 00 Class F FF Flanged L Lug Class 00 Class 00 T Threaded E Construction F Body Material 0 Special X0 Special M A F CL L A LF S A CFM Pressure Balanced C A M0 A WC L A LC S A FL Sleeved Type C A WCA E A F L A LF S A CFM C A WCB E A C L A LCB S A F C A WCC E A C L A LF S0 A C FC M A F E A F LA A LF D A F M A WC E A C LB A LC D A A M A F E A F LD A LCC D A F M A WC E A CA S A F0 D A A M A F CL L A LF S A CF D A F M A WC L A LCA S A F0L D A A M A F CL L A LF S A CF M A WC L A LC S A F G Trim Material G Seat I O-Ring J Operation 00 Special 0 Cr/Cr 0 0/0 0 0L/0L 0 / 0 L/L 0 STL/0 0 STL/ X T M Special PTFE Metal 0 None Viton Teflon HNBR NBR Special EPDM FVMQ FFKM B L G P E C N S Bare Stem Lever Gearbox Pneumatic Electric Gear w/ Chain Pneumatic-Hydraulic Solid Lever AFLAS D Lever with locking device R Solid lever with locking device
VALVE FIGURE NUMBER (CONT D) HOW TO ORDER HOW THE FIGURE NUMBER SYSTEM WORKS Introduction. Figure number system uses a code consisting digits of letters and numbers to represent the specification of a valve of certain specification. Of digits, they are separated into groups identified by letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential parameters of the valve. Uses. To use the figure number system to generate a code is easy. Under each group, the code is shown on the left while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the specification of the valve is not listed, select the code for Special. The total length of the figure number shall be exactly digits. Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which means eliminating Specials. If you don t have enough specification or information about the valve you are ordering, or you re not sure how to use the system to generate a figure number, contact one of our sales representatives for help. Note: FBV reserves the right to make any modifications without notice.
Offshore Pipeline Onshore Refinery IMPORTANT NOTICE All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms. Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only. FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Brittmoore Rd Suite 000 Houston, TX 0, USA T -- F -- E sales@fbvalve.com www.fbvalve.com FBV Inc. All rights reserved. FBV Inc. All rights reserved.