Keep the Heat Test School Name. Team Number

Similar documents
International Academy Invitational Tournament Keep the Heat Test Team Name. Team Number. Predicted Water Temp C

Thermodynamics B Test

Chapter: Heat and States

* Defining Temperature * Temperature is proportional to the kinetic energy of atoms and molecules. * Temperature * Internal energy

PHYS102 Previous Exam Problems. Temperature, Heat & The First Law of Thermodynamics

Chapter 10 Temperature and Heat

Entropy & the Second Law of Thermodynamics

Chapter 11. Energy in Thermal Processes

Preview. Heat Section 1. Section 1 Temperature and Thermal Equilibrium. Section 2 Defining Heat. Section 3 Changes in Temperature and Phase

Chapter 11. Energy in Thermal Processes

Part III: Planes, Trains, and Automobiles: Making Heat Work for You

This Week. 6/2/2015 Physics 214 Summer

Temperature and Its Measurement

Chapters 17 &19 Temperature, Thermal Expansion and The Ideal Gas Law

THERMODYNAMICS WRITTEN TEST PORTION GOPHER INVITATIONAL JANUARY 6TH 2018 NAMES TEAM NAME AND NUMBER SCHOOL

Thermodynamics C Test

MATTER AND HEAT. Chapter 4 OUTLINE GOALS

CHAPTER 3 TEST REVIEW

What does temperature have to do with energy? What three temperature scales are commonly used? What makes things feel hot or cold?

Thermal energy 7 TH GRADE SCIENCE

Start Part 2. Tro's "Introductory Chemistry", Chapter 3

Classification following properties of the system in Intensive and Extensive

Atomic Theory, Temperature and Thermal Expansion

Chapter 14: Temperature and Heat

(Heat capacity c is also called specific heat) this means that the heat capacity number c for water is 1 calorie/gram-k.

Temperature Energy and Heat

Recap. There are 3 different temperature scales: Celsius, Kelvin, and Fahrenheit

8th Grade. Thermal Energy Study Guide.

Module - 1: Thermodynamics

Slide 1 / 67. Slide 2 / 67. 8th Grade. Thermal Energy Study Guide Slide 3 / 67. Thermal Energy. Study Guide.

Chapter 11. Important to distinguish between them. They are not interchangeable. They mean very different things when used in physics Internal Energy

Temperature, Heat, and Expansion

Chapter 21: Temperature, Heat and Expansion

Archimedes Principle

CALORIEMETRY. Similar to the other forms of the energy, The S.I unit of heat is joule. joule is represented as J.

A) 2.0 atm B) 2.2 atm C) 2.4 atm D) 2.9 atm E) 3.3 atm

CHAPTER 15 The Laws of Thermodynamics. Units

A thermodynamic system is taken from an initial state X along the path XYZX as shown in the PV-diagram.

Thermal Physics. Topics to be covered. Slide 2 / 105. Slide 1 / 105. Slide 3 / 105. Slide 4 / 105. Slide 5 / 105. Slide 6 / 105.

Speed Distribution at CONSTANT Temperature is given by the Maxwell Boltzmann Speed Distribution

PROGRAM OF PHYSICS. Lecturer: Dr. DO Xuan Hoi Room A

Temperature and Thermometers. Temperature is a measure of how hot or cold something is. Most materials expand when heated.

Page 1 SPH3U. Heat. What is Heat? Thermal Physics. Waterloo Collegiate Institute. Some Definitions. Still More Heat

THERMODYNAMICS CONCEPTUAL PROBLEMS

Exercises Temperature (pages ) 1. Define temperature. 2. Explain how a common liquid thermometer works.

Chapter 14 Temperature and Heat

PAPER 2 THEORY QUESTIONS

Thermal Physics. Slide 1 / 163. Slide 2 / 163. Slide 3 / 163. Thermal Physics.

Study Guide Unit 3 Chapter 6 DRAFT

Slide 2 / 118. Thermochemistry

2,000-gram mass of water compared to a 1,000-gram mass.

Temp vs. Heat. Absolute Temperature Scales. Common Temperature Scales. Thermal Energy. Heat and Temperature are not the same!!

Handout 12: Thermodynamics. Zeroth law of thermodynamics

Name... Class... Date... Specific heat capacity and specific latent heat

kinetic molecular theory thermal energy.

CHAPTER - 12 THERMODYNAMICS

1. How much heat was needed to raise the bullet to its final temperature?

2. If the volume of a container holding a gas is reduced, what will happen to the presure within the container?

CHEM What is Energy? Terminology: E = KE + PE. Thermodynamics. Thermodynamics

Dual Program Level 1 Physics Course

Handout 12: Thermodynamics. Zeroth law of thermodynamics

Introduction CHAPTER Prime Movers. 1.2 Sources of Energy

Chapter 14 Temperature and Heat

SPECIFIC HEAT CAPACITY AND HEAT OF FUSION

1985B4. A kilogram sample of a material is initially a solid at a temperature of 20 C. Heat is added to the sample at a constant rate of 100

Physical Science Chapter 5 Cont2. Temperature & Heat

Temperature Thermal Expansion Ideal Gas Law Kinetic Theory Heat Heat Transfer Phase Changes Specific Heat Calorimetry Heat Engines

Heat and Temperature

Chapter 5: Thermochemistry. Problems: , , 5.100, 5.106, 5.108, , 5.121, 5.126

We ll cut through this one. :) CHOPPED-UP CHAPTER

Broughton High School. Thermal Energy. Physical Science Workbook Chapter 6 Thermal Energy 2016 Mr. Davis

Figure 1.1. Relation between Celsius and Fahrenheit scales. From Figure 1.1. (1.1)

Physics 5D PRACTICE FINAL EXAM Fall 2013

Kinetic Theory continued

Chapter 2 Heat, Temperature and the First Law of Thermodynamics

Temperature and Heat. Chapter 17. PowerPoint Lectures for University Physics, Twelfth Edition Hugh D. Young and Roger A. Freedman

I. The Nature of Energy A. Energy

NATIONAL 5 PHYSICS THERMODYNAMICS

Name Class Date. How are temperature and energy related? What are the three common temperature scales? Why do objects feel hot or cold?

Boundary. Surroundings

Answer: Volume of water heated = 3.0 litre per minute Mass of water heated, m = 3000 g per minute Increase in temperature,

Kinetic Theory continued

Chapter 9. Preview. Objectives Defining Temperature. Thermal Equilibrium. Thermal Expansion Measuring Temperature. Section 1 Temperature and

Thermochemistry. Energy (and Thermochemistry) World of Chemistry Chapter 10. Energy. Energy

Bell Ringer. What are the formulas to obtain the force, acceleration, and mass? And corresponding units. F= ma M= f/a A= f/m

Chapter 5. Thermochemistry

A). Yes. B). No. Q15 Is it possible for a solid metal ball to float in mercury?

First Law of Thermodynamics Second Law of Thermodynamics Mechanical Equivalent of Heat Zeroth Law of Thermodynamics Thermal Expansion of Solids

Name Class Date. As you read Lesson 17.1, use the cause and effect chart below. Complete the chart with the terms system and surroundings.

Chapter 10 Test Form B

The first law of thermodynamics. U = internal energy. Q = amount of heat energy transfer

10/12/10. Chapter 16. A Macroscopic Description of Matter. Chapter 16. A Macroscopic Description of Matter. State Variables.

Chapter 1: FUNDAMENTAL CONCEPTS OF THERMODYNAMICS AND VARIOUS THERMODYMIC PROCESSES

Thermodynamic system is classified into the following three systems. (ii) Closed System It exchanges only energy (not matter) with surroundings.

Chapter 4: Heat Capacity and Heat Transfer

ENERGY. Unit 12: IPC

Phase Changes and Latent Heat

Temperature and Heat. Chapter 10. Table of Contents. Chapter 10. Chapter 10. Bellringer. Objectives. Chapter 10. Chapter 10

Thermodynamics - Heat Transfer June 04, 2013

Thermodynamics Test Wednesday 12/20

Transcription:

Keep the Heat Test 1-28-2012 School Name Team Number Circle the all of the correct answer to the below questions. One or more of the answers can be correct, if more than on one answer is correct, circle all correct answers. 1) Temperature is a measure of of the particles in an object. a) the difference between the potential and kinetic energy b) the sum of the potential and kinetic energy c) the average potential energy d) the average kinetic energy 2) A liquid thermometer works because liquid when warmed. a) expands b) solidifies c) contracts d) condenses 3) An increase in heat in a system. a) has less kinetic energy b) increases entropy c) decreases entropy d) reduces temperature 4) The specific latent heat of melting for lead is 22.4 kj/kg and that of oxygen is 13.9 kj/kg. This means: a) Lead melts at a higher temperature. b) More energy is needed to heat lead than is needed to heat the same mass of oxygen by the same amount. c) More energy is needed to melt lead than is needed to melt oxygen. d) Less energy is needed to heat lead than is needed to heat the same mass of oxygen by the same amount. e) Lead melts at a lower temperature. 5) Convert the temperature of 32 o C to degrees Rankline a) -409 o R b) -370 o R c) 485 o R d) 509 o R e) 549 o R 6) Convert the temperature of 100 o F to degrees Celsius a) 24 o C b) 38 o C c) 88 o C d) 122 o C e) 148 o C 7) Convert the temperature of 32 o F to degrees Kelvin a) 259 o K b) 273 o K c) 299 o K d) 323 o K e) 388 o K

8) The temperature of Lightening is 28000 o K. Convert this temperature to degrees Fahrenheit. a) 15644 o F b) 15708 o F c) 49940 o F d) 50000 o F e) 50149 o F 9) An Object starts at 50 o C, energy is added until the temperature increases to 60 o C for a total T of 10 o C. What is the temperature change as expressed in degrees Kelvin a) -263 o K b) 10 o K c) 50 o K d) 283 o K e) 510 o K 10) An Object starts at 85 o C, energy is added until the temperature increases to 100 o C for a total T of 15 o C. What is the temperature change as expressed in degrees Fahrenheit a) 8.3 o F b) 15 o F c) 27 o F d) 40 o F e) 59 o F 11) Which of the following statement is/are correct? a) Heat is a form of energy and it is contained inside a body b) The temperature of a body does not depend on the internal energy it possesses c) When two bodies of different temperatures are in thermal contact, internal energy are transferred from the body of higher temperature to that of lower temperature d) It is impossible to transfer heat energy from one body to another if they are at the same temperature 12) Which of the following statements about 'heat' is/are Correct? a) it is the energy transferred due to temperature difference b) if Object A has a higher temperature than Object B, Object A must have more thermal energy than Object B. c) it has the same meaning as work d) it is related to degree of hotness 13) The specific heat capacity of a substance is the heat required to warm a) it by 1 degree Celsius b) 1 kilogram of water by one degree Celsius c) 1 kilogram of it by one degree Celsius d) an equal weight of water by one degree Celsius 14) Given the specific heat capacity of ice is 2100 Jkg -1o C -1, and the specific heat capacity of water is 4200 Jkg -1o C -1. For the same mass of ice and water, if the same amount of heat is added to the ice and water: a) The temperature of the Ice will increase 2 times the temperature increase of the water b) The temperature of the Ice and water will increase the same amount. c) The temperature of the Ice will increase 0.5 times the temperature increase of the water d) Not enough information is provided determine the relative temperature change 15) The specific heat capacity of a water is 4200 Jkg -1o C -1 means that if we have 1 kg of water: a) a heater of power 1 W would take 4200s to heat the water before it boils b) a heater of power 4200 W would take 1 s to heat the water from 300 K to 301 K c) the water contains 4200 J of internal energy d) 4200 J are needed to turn the water into steam 16) By E = mc T and c = 4200 Jkg -1o C -1. Calculate the energy used to heat the water. (Given Mass of water m = 2 kg, Initial temperature T1 = 80 o C, Final temperature T2 = 100 o C ) a) 672000J b) 840000J c) 168000J d) 120000J

17) Sublimation occurs when a) liquid water changes to gaseous water. b) gaseous water changes to ice. c) ice changes to gaseous water. d) ice changes to liquid water. e) liquid water changes to ice. 18) Which of the following are expressions of microscopic energy: a) A vehicle is sitting on top of a large hill b) The kinetic energy of individual molecules c) The potential energy stored in candle wax d) A ball is flying through the air at 10 feet / second. e) An average donut is 320 calories 19) A heat engine has a thermal efficiency of 45%. How much power does the engine produce when heat is transferred into it at a rate of 10 9 kj/hr? a) 50 MW b) 75 MW c) 100 MW d) 125 MW 20) The thermodynamic efficiency of a heat engine that rejects heat at a rate of 20 MW when heat is supplied to it at a rate of 60 MW is: a) 33.3% b) 50% c) 66.7% d) 75% 21) Which of the following laws of physics becomes the foundation of thermodynamics? a) Newton s laws of motion b) Law of conservation of energy c) Law of universal gravitation d) Law of conservation of momentum 22) All real refrigerators require work to get heat to flow from a cold area to a warmer area. Which of the following parts of the refrigerator does work for this purpose? a) coils b) lamp c) condenser d) motor 23) What do you call an object that does not significantly change in temperature and internal energy even when heat is removed or added to it? a) Heat sink b) Reservoir c) Working substance d) Heat engine 24) The natural direction of heat flow is from high-temperature reservoir to a low temperature reservoir, regardless of their respective heat contents. This fact is incorporated in the a) first law of thermodynamics. b) second law of thermodynamics. c) law of conservation of energy. d) law of conservation of entropy. 25) If 50 grams of ice and 50 grams of water are both at 0 o C, then it is true that a) the water molecules have a higher average kinetic energy than the ice molecules b) the ice molecules have a higher average kinetic energy than the water molecules c) the water molecules have a higher total potential energy than the ice molecules d) the ice molecules have a higher total potential energy than the water molecules

26) A block of ice at -10 o C is slowly heated and converted to steam at 100 o C. Which of the following curves represents the phenomenon qualitatively 27) A block of metal is heated to a temperature much higher than the room temperature and allowed to cool in a room free from air currents. Which of the following curves correctly represents the rate of cooling? 28) An adiabatic expansion of a gas is one in which a) the pressure is kept constant b) the volume is kept constant c) the temperature is kept constant d) it neither loses nor gains heat 29) In what year did Anders Celsius propose the international temperature scale bearing his name? a) 1614 b) 1655 c) 1703 d) 1742 e) 1821 30) This person is often called the father of thermodynamics c) Anders Celsius d) Rudolf Diesel e) Daniel Gabriel Fahrenheit 31) This person laid the ground work for the second law of thermodynamics c) Anders Celsius d) Rudolf Diesel e) Daniel Gabriel Fahrenheit 32) Who is known as the first engineer to prove that fuel can be ignited without a flame or a spark, which he accomplished in the 1890s. c) Rudolf Diesel d) James Prescott Joule e) Nikolaus August Otto

33) Who invented the four stroke combustion cycle. He was the first to create a practical multistroke engine. His working model was the first internal combustion, four-stroke engine to efficiently burn fuel in a piston. c) Rudolf Diesel d) James Prescott Joule e) Nikolaus August Otto 34) Which of the following were NOT credited with optimizing or improving thermal engines? a) Miller b) Otto c) Atkinson d) Watt e) Fahrenheit 35) List the Number of the Law of Thermodynamics that is expressed in the following statements (0 th Law,1 st Law,2 nd Law,3 rd Law or 4 th Law). a) Using logs in a fire place to heat a home b) Lighting a Candle which gives off heat and light c) A thermometer is placed in a cup of hot water to measure it s temperature. d) Coffee is placed in a coffee mug. The outside of the mug heats up. e) An oscillating pendulum eventually stops and comes to rest. f) A heat engine takes that works between two heat reservoirs 36) A small candy bar has 52 calories. If all of its energy were converted to heat, by how much would it raise the temperature of 1 L of water? a) 0.1 C b) 52 C c) 104 C d) 0 C 37) Who discovered the mechanical equivalent of heat? a) Robert Boyle b) Antoine Lavoisier c) James Joule d) James Watt 38) If a fixed volume cylinder containing water, is heated by a bunsen burner, what is the type of thermodynamic process? a) Isochoric b) Isobaric c) Adiabatic d) Isothermal e) Isentropic 39) Express the following quantities in terms of base SI units (kg, m, and s): (a) power, (b) kinetic energy, and (c) specific weight. a) Power = b) Kinetic energy = c) Specific weight =

40) Identify which of the following are extensive properties and which are intensive properties: (a) a 10-m3 volume, (b) 30 J of kinetic energy, (c) a pressure of 90 kpa, (d) a stress of 1000 kpa, (e) a mass of 75 kg, and (f) a velocity of 60 m/s. (g) Convert all extensive properties to intensive properties assuming m = 75 kg. a) b) c) d) e) f) g) 41) When you are setting a table, why does the metal fork feel cooler than a plastic cup? Use Thermodynamic terms to explain your answer. (This question is worth both points and is the first Tie Breaker) 42) The gas in a cubical volume with sides at different temperatures is suddenly isolated with reference to transfer of mass and energy. Is this system in thermodynamic equilibrium? Why or why not? (This question is worth both points and is the Second Tie Breaker) 43) Does exothermic truly mean the reaction releases only heat? Use Thermodynamic terms to explain your answer. (This question is worth both points and is the Third Tie Breaker) 44) Use equations to show that -40 C is the same temperature as 40 F. (This question is worth both points and is the Fourth Tie Breaker)

Keep the Heat Test 1-28-2012 School Name Team Number Circle the all of the correct answer to the below questions. One or more of the answers can be correct, if more than on one answer is correct, circle all correct answers. 1) Temperature is a measure of of the particles in an object. a) the difference between the potential and kinetic energy b) the sum of the potential and kinetic energy c) the average potential energy d) the average kinetic energy 2) A liquid thermometer works because liquid when warmed. a) expands b) solidifies c) contracts d) condenses 3) An increase in heat in a system. a) has less kinetic energy b) increases entropy c) decreases entropy d) reduces temperature 4) The specific latent heat of melting for lead is 22.4 kj/kg and that of oxygen is 13.9 kj/kg. This means: a) Lead melts at a higher temperature. b) More energy is needed to heat lead than is needed to heat the same mass of oxygen by the same amount. c) More energy is needed to melt lead than is needed to melt oxygen. d) Less energy is needed to heat lead than is needed to heat the same mass of oxygen by the same amount. e) Lead melts at a lower temperature. 5) Convert the temperature of 32 o C to degrees Rankline a) -409 o R b) -370 o R c) 485 o R d) 509 o R e) 549 o R 6) Convert the temperature of 100 o F to degrees Celsius a) 24 o C b) 38 o C c) 88 o C d) 122 o C e) 148 o C 7) Convert the temperature of 32 o F to degrees Kelvin a) 259 o K b) 273 o K c) 299 o K d) 323 o K e) 388 o K

8) The temperature of Lightening is 28000 o K. Convert this temperature to degrees Fahrenheit. a) 15644 o F b) 15708 o F c) 49940 o F d) 50000 o F (SIG Fig s) e) 50149 o F 9) An Object starts at 50 C, energy is added until the temperature increases to 60 C for a total T of 10 C. What is the temperature change as expressed in degrees Kelvin a) -263 o K b) 10 o K c) 50 o K d) 283 o K e) 510 o K 10) An Object starts at 85 C, energy is added until the temperature increases to 100 C for a total T of 15 C. What is the temperature change as expressed in degrees Fahrenheit a) 8.3 o F b) 15 o F c) 27 o F d) 40 o F e) 59 o F 11) Which of the following statement is/are correct? a) Heat is a form of energy and it is contained inside a body b) The temperature of a body does not depend on the internal energy it possesses c) When two bodies of different temperatures are in thermal contact, internal energy are transferred from the body of higher temperature to that of lower temperature d) It is impossible to transfer heat energy from one body to another if they are at the same temperature 12) Which of the following statements about 'heat' is/are Correct? a) it is the energy transferred due to temperature difference b) if Object A has a higher temperature than Object B, Object A must have more thermal energy than Object B. c) it has the same meaning as work d) it is related to degree of hotness 13) The specific heat capacity of a substance is the heat required to warm a) it by 1 degree Celsius b) 1 kilogram of water by one degree Celsius c) 1 kilogram of it by one degree Celsius d) an equal weight of water by one degree Celsius 14) Given the specific heat capacity of ice is 2100 Jkg -1o C -1, and the specific heat capacity of water is 4200 Jkg -1o C -1. For the same mass of ice and water, if the same amount of heat is added to the ice and water: a) The temperature of the Ice will increase 2 times the temperature increase of the water b) The temperature of the Ice and water will increase the same amount. c) The temperature of the Ice will increase 0.5 times the temperature increase of the water d) Not enough information is provided determine the relative temperature change 15) The specific heat capacity of a water is 4200 Jkg -1o C -1 means that if we have 1 kg of water: a) a heater of power 1 W would take 4200s to heat the water before it boils b) a heater of power 4200 W would take 1 s to heat the water from 300 K to 301 K c) the water contains 4200 J of internal energy d) 4200 J are needed to turn the water into steam 16) By E = mc T and c = 4200 Jkg -1o C -1. Calculate the energy used to heat the water. (Given Mass of water m = 2 kg, Initial temperature T1 = 80 o C, Final temperature T2 = 100 o C ) a) 672000J b) 840000J c) 168000J d) 120000J

17) Sublimation occurs when a) liquid water changes to gaseous water. b) gaseous water changes to ice. c) ice changes to gaseous water. d) ice changes to liquid water. e) liquid water changes to ice. 18) Which of the following are expressions of microscopic energy: a) A vehicle is sitting on top of a large hill b) The kinetic energy of individual molecules c) The potential energy stored in candle wax d) A ball is flying through the air at 10 feet / second. e) An average donut is 320 calories 19) A heat engine has a thermal efficiency of 45%. How much power does the engine produce when heat is transferred into it at a rate of 10 9 kj/hr? a) 50 MW b) 75 MW c) 100 MW d) 125 MW 20) The thermodynamic efficiency of a heat engine that rejects heat at a rate of 20 MW when heat is supplied to it at a rate of 60 MW is: a) 33.3% b) 50% c) 66.7% d) 75% 21) Which of the following laws of physics becomes the foundation of thermodynamics? a) Newton s laws of motion b) Law of conservation of energy c) Law of universal gravitation d) Law of conservation of momentum 22) All real refrigerators require work to get heat to flow from a cold area to a warmer area. Which of the following parts of the refrigerator does work for this purpose? a) coils b) lamp c) condenser d) motor 23) What do you call an object that does not significantly change in temperature and internal energy even when heat is removed or added to it? a) Heat sink b) Reservoir c) Working substance d) Heat engine 24) The natural direction of heat flow is from high-temperature reservoir to a low temperature reservoir, regardless of their respective heat contents. This fact is incorporated in the a) first law of thermodynamics. b) second law of thermodynamics. c) law of conservation of energy. d) law of conservation of entropy. 25) If 50 grams of ice and 50 grams of water are both at 0 o C, then it is true that a) the water molecules have a higher average kinetic energy than the ice molecules b) the ice molecules have a higher average kinetic energy than the water molecules c) the water molecules have a higher total potential energy than the ice molecules d) the ice molecules have a higher total potential energy than the water molecules

26) A block of ice at -10 o C is slowly heated and converted to steam at 100 o C. Which of the following curves represents the phenomenon qualitatively 27) A block of metal is heated to a temperature much higher than the room temperature and allowed to cool in a room free from air currents. Which of the following curves correctly represents the rate of cooling? 28) An adiabatic expansion of a gas is one in which a) the pressure is kept constant b) the volume is kept constant c) the temperature is kept constant d) it neither loses nor gains heat 29) In what year did Anders Celsius propose the international temperature scale bearing his name? a) 1614 b) 1655 c) 1703 d) 1742 e) 1821 30) This person is often called the father of thermodynamics c) Anders Celsius d) Rudolf Diesel e) Daniel Gabriel Fahrenheit 31) This person laid the ground work for the second law of thermodynamics c) Anders Celsius d) Rudolf Diesel e) Daniel Gabriel Fahrenheit 32) Who is most known as the first engineer to prove that fuel can be ignited without a flame or a spark, which he accomplished in the 1890s. c) Rudolf Diesel d) James Prescott Joule e) Nikolaus August Otto

33) Who invented the four stroke combustion cycle. He was the first to create a practical multistroke engine. His working model was the first internal combustion, four-stroke engine to efficiently burn fuel in a piston. c) Rudolf Diesel d) James Prescott Joule e) Nikolaus August Otto 34) Which of the following were NOT credited with optimizing or improving thermal engines? a) Miller b) Otto c) Atkinson d) Watt e) Fahrenheit 35) List the Number of the Law of Thermodynamics that is expressed in the following statements (0 th Law,1 st Law,2 nd Law,3 rd Law or 4 th Law). a) Using logs in a fire place to heat a home (1 st Law) b) Lighting a Candle which gives off heat and light (1 st Law) c) A thermometer is placed in a cup of hot water to measure it s temperature. (0th Law) d) Coffee is placed in a coffee mug. The outside of the mug heats up. (1 st Law) e) An oscillating pendulum eventually stops and comes to rest. (2 nd Law) f) A heat engine takes that works between two heat reservoirs (2 nd Law) 36) A small candy bar has 52 calories. If all of its energy were converted to heat, by how much would it raise the temperature of 1 L of water? a) 1 C b) 52 C c) 104 C d) 0 C 37) Who discovered the mechanical equivalent of heat? a) Robert Boyle b) Antoine Lavoisier c) James Joule d) James Watt 38) If a fixed volume cylinder containing water, is heated by a bunsen burner, what is the type of thermodynamic process? a) Isochoric b) Isobaric c) Adiabatic d) Isothermal e) Isentropic 39) Express the following quantities in terms of base SI units (kg, m, and s): (a) power, (b) kinetic energy, and (c) specific weight. a) Power = (force)(velocity) = (N)(m/s) = (kg m/s 2 )(m/s) = kg m 2 /s 3 b) Kinetic energy = mass velocity 2 = kg = kg m 2 /s 2 c) Specific weight = weight/volume = N/m 3 = kg /m 3 = kg/(s 2 m 2 )

40) Identify which of the following are extensive properties and which are intensive properties: (a) a 10-m3 volume, (b) 30 J of kinetic energy, (c) a pressure of 90 kpa, (d) a stress of 1000 kpa, (e) a mass of 75 kg, and (f) a velocity of 60 m/s. (g) Convert all extensive properties to intensive properties assuming m = 75 kg. a) Extensive. If the mass is doubled, the volume increases. b) Extensive. If the mass doubles, the kinetic energy increases. c) Intensive. Pressure is independent of mass. d) Intensive. Stress is independent of mass. e) Extensive. If the mass doubles, the mass doubles. f) Intensive. Velocity is independent of mass. g) 41) When you are setting a table, why does the metal fork feel cooler than a plastic cup? Use Thermodynamic terms to explain your answer. (This question is worth both points and is the first Tie Breaker) The reason for that is conductivity. Metal is a better conductor of heat than plastic. When you touch metal, the body heat from your body is conducted to the metal very quickly. Because of the high thermal conductivity of the metal, the heat from your body is heating a larger portion of the mass of the metal than of the plastic cup. 42) The gas in a cubical volume with sides at different temperatures is suddenly isolated with reference to transfer of mass and energy. Is this system in thermodynamic equilibrium? Why or why not? (This question is worth both points and is the Second Tie Breaker) It is not in thermodynamic equilibrium. If the sides of the container are at different temperatures, the temperature is not uniform over the entire volume, a requirement of thermodynamic equilibrium. After a period of time elapsed, the sides would all approach the same temperature and equilibrium would eventually be attained. 43) Does exothermic truly mean the reaction releases only heat? Use Thermodynamic terms to explain your answer. (This question is worth both points and is the Third Tie Breaker) In thermodynamics, the term exothermic ("outside heating") describes a process or reaction that releases energy from the system, usually in the form of heat, but also in the form of light (e.g. a spark, flame, or explosion), electricity (e.g. a battery), or sound (e.g. burning hydrogen). 44) Use equations to show that -40 C is the same temperature as 40 F. (This question is worth both points and is the Fourth Tie Breaker) Two Equations - C = (F -32)*5/9; and F = C Therefore F = (F-32)*5/9 F 5/9*F = - 32 * 5/9 4/9 * F = - 32 *5/9 F = (- 32 * 5/9) / (4/9) F = C = -40