# LOBE (TX) PENETRATION GAGES TMF/TXq9 INTERNAL RECESS S STANDARD REFERENCES TMF/TXq9 5 7 9 5 5 7 5 5 55 7 9 5 7 9 5 5 7 5 5 55 7 9 When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With Digital Indicators Note: TamperProof Style Available (Sizes # Thru #5) # LOBE (TX) GO PRODUCTION GAGES TMF/TXq INTERNAL RECESS S STANDARD REFERENCES TMF/TXq 5 7 9 5 5 7 5 5 55 7 9 When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With Digital Indicators Note: TamperProof Style Available (Sizes # Thru #5) 5 7 9 5 5 7 5 5 55 7 9
#5 LOBE (TX) INTERNAL FINAL GAGES TMF/TXq INTERNAL RECESS S STANDARD REFERENCES TMF/TXq 5 5 5 5 55 5 57 5 59 5 55 5 55 57 5 5 55 55 555 5 57 5 59 5 5 7 9 5 5 7 5 5 55 7 9 Universal s Gage Probes are heat treated, thermally stabilized, and surface treated. This provides additional hardness for maximum wear. Gage probes are calibrated to dimensions and tolerances as specified and are traceable to the National Institute of Standards and Technology. #9 HEXALOBULAR GO PENETRATION GAGES IFI5 & ISO INTERNAL RECESS S REFERECE STANDARDS STANDARD REFERENCES IFI 5 & ISO.. 9 9 9 95 9 95 9 9 95 95 955 9 97 9 99 9 5 5 5 5 55 7 9 When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With Digital Indicators Note: TamperProof Style Available (Sizes # Thru #5) 5
#95 SCREW SLOT PENETRATION GAGE FOR SLOTTED HEAD SCREWS 95 DESCRIPTION SCREW SLOT PENETRATION GAUGE PROBE WIDTH. /,mm PROBE DEPTH UP TO 7/ / mm Universal s Screw Slot Penetration Gage Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators. #9 TOTAL RECESS DEPTH GAGE FOR ALL CROSS RECESS HEAD SCREWS 9 9 9 9 9 RECESS Universal s Total Recess Depth Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators.
#9 TYPE I PENETRATION GAGES FOR TYPE I CROSS RECESS HEAD SCREWS RECESS 9 9 9 9 9 Universal s Type Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPC Compatible With Digital Indicators. #9 TYPE IA PENETRATION GAGES FOR TYPE IA CROSS RECESS HEAD SCREWS 9 9 9 9 9 RECESS Universal s Type A Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPC Compatible With Digital Indicators.
#95 HEXAGON PENETRATION GAGES FOR SOCkET CAP, SHOULDER AND SET SCREWS 95 955 95 957 959 95 95 95 955 95 95 955 95 957 95 955 955 95 9575 957 HEX.5.5 / 5/ / 7/ / 9/ 5/ / 7/ / 5/ / 7/ / 9/ 5/ / 7/ When Ordering Specify: Inch Or Metric Dial Indicator SPCCompatible With Digital Indicators Note: TamperProof Style Available Specify When Ordering. #9 METRIC HEXAGON PENETRATION GAGES FOR SOCkET CAP, SHOULDER AND SET SCREWS HEX ISO7 (DIN9) JIS7 ISO7 (DIN799) JIS9 ISO / (DIN 9/9) JIS77 9.7 9.9 9..7mm.9mm.mm M. M./M./M. M M.5 9.5 9. 9.5.5mm mm.5mm M./M M.5 M M M M M M5 9. 9. 95. mm mm 5mm M M5 M M M 9. 9. 9 mm mm mm M M M M M M/ M/ M/M 9 9 9 mm mm mm M /M M/M M/M M/M 97 99 9 9 7mm 9mm mm mm M/M M/M7 M M When Ordering Specify: Inch Or Metric Dial Indicator SPCCompatible With Digital Indicators Note: TamperProof Style Available Specify When Ordering.
#9 WRENCHING HEIGHT GAGES FOR HEXAGON WASHER HEAD SCREWS SCREW HEX 9 9 95 9 97 95 95 9 975 # / # # / #5 # / #7 / # # / # / 5/ / 7/ / / / / 5/ / / 9/ 5/ / Universal s Wrenching Height Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPC Compatible With Digital Indicators. #9 WRENCHING HEIGHT GAGES FOR HEXAGON WASHER HEAD SCREWS SCREW HEX 9. 9 95 95.5 97 9 9 9 95 9 MX, M,5X,5 MX,5 M,5X, MX,7 M5X, X MX,5 MX,5 MX,75.mm.mm 5.mm 5.5mm 7.mm.mm mm mm 5mm mm Universal s Wrenching Height Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators.
#95 OFFSET CRUCIFORM PENETRATION GAGES FOR OFFSET CRUCIFORM RECESS HEAD SCREWS NASM7B AND NASM9 STANDARDS 95 95 95 95 95 955 95 95 95 955 95 95 95 955 955 95 9575 ACR NASM 9 95* 95* 95* 955* 95* RECESS 5 / 5/ / 7/ / 9/ 5/ / Universal s Offset Cruciform Penetration Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gauges Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators. #95 SQUARE PENETRATION GAGES FOR SqUARE RECESS HEAD SCREWS ROBERTSON SqUARE STANDARDS 95 95 95 95 95 Universal s Square Drive Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators.
#95 TWELVEPOINT PENETRATION GAGES FOR INTERNAL POINT RECESS HEAD SCREWS EUROPEAN AUTOMOTIVE STANDARDS 95 955 95 95 95 95 95 95 M M5 M M M M Universal s Point Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators. #95 TWELVEPOINT GONOGO GAGES FOR INTERNAL POINT RECESS HEAD SCREWS EUROPEAN AUTOMOTIVE STANDARDS 95 955 95 95 95 95 95 95 M M5 M M M M Universal s Point GoNoGo Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. 5