Page : 1 of 12 The following samples was/were submitted and identified by/on behalf of the applicant as : Sample Description Style/Item No. Sample Receiving Date Testing Period : : : : SMD CRYSTAL RESONATOR 7B(HB), 7M(HM), 8Z(HG), 8Y(HY), 8H, 8Q(HF), 8J, 9Q SERIES AB, AM, AZ, AY, AJ SERIES DX SERIES 2017/11/27 2017/11/27 TO 2017/12/01 ========================================================================================= Test Result(s) : Please refer to following pages.
Page : 2 of 12 Test Result(s) PART NAME No.1 : MIXED ALL PARTS Test Item(s) Cadmium (Cd) Unit Method With reference to IEC 62321-5 (2013) and performed by ICP-AES. Result MDL No.1 2 n.d. Lead (Pb) With reference to IEC 62321-5 (2013) and performed by ICP-AES. 2 n.d. Mercury (Hg) With reference to IEC 62321-4 (2013) and performed by ICP-AES. 2 n.d. Hexavalent Chromium Cr(VI) With reference to IEC 62321-7-2 (2017) and performed by UV-VIS. 8 n.d. Sum of PBBs - n.d. Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs With reference to IEC 62321-6 (2015) and performed by GC/MS. - n.d. Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether
Page : 3 of 12 Test Item(s) Unit Method MDL DBP (Dibutyl phthalate) (CAS No.: 84-74-2) BBP (Butyl Benzyl phthalate) (CAS No.: 85-68-7) DEHP (Di- (2-ethylhexyl) phthalate) (CAS No.: 117-81-7) DIDP (Di-isodecyl phthalate) (CAS No.: 26761-40-0; 68515-49-1) DINP (Di-isononyl phthalate) (CAS No.: 28553-12-0; 68515-48-0) DNOP (Di-n-octyl phthalate) (CAS No.: 117-84-0) DIBP (Di-isobutyl phthalate) (CAS No.: 84-69-5) DNHP (Di-n-hexyl phthalate) (CAS No.: 84-75-3) Hexabromocyclododecane (HBCDD) and all major diastereoisomers identified (α- HBCDD, β- HBCDD, γ- HBCDD) (CAS No.: 25637-99-4 and 3194-55-6 (134237-51-7, 134237-50-6, 134237-52-8)) Halogen Halogen-Fluorine (F) (CAS No.: 14762-94-8) Halogen-Chlorine (Cl) (CAS No.: 22537-15-1) Halogen-Bromine (Br) (CAS No.: 10097-32-2) Halogen-Iodine (I) (CAS No.: 14362-44-8) Perfluorooctane sulfonates (PFOS-Acid, Metal Salt, Amide) With reference to IEC 62321 (2008). Analysis was performed by GC/MS. With reference to BS EN 14582 (2016). Analysis was performed by IC. With reference to BS EN 14582 (2016). Analysis was performed by IC. With reference to BS EN 14582 (2016). Analysis was performed by IC. With reference to BS EN 14582 (2016). Analysis was performed by IC. With reference to US EPA 3550C (2007). Analysis was performed by LC/MS. Result No.1 10 n.d.
Page : 4 of 12 Test Item(s) PFOA (CAS No.: 335-67-1) Antimony (Sb) Arsenic (As) Beryllium (Be) Unit Method With reference to US EPA 3550C (2007). Analysis was performed by LC/MS. With reference to US EPA 3052 (1996). Analysis was performed by ICP-AES. With reference to US EPA 3052 (1996). Analysis was performed by ICP-AES. With reference to US EPA 3052 (1996). Analysis was performed by ICP-AES. MDL Result No.1 10 n.d. 2 n.d. 2 n.d. 2 n.d. Note: 1. = ppm;0.1wt% = 1000ppm 2. MDL = Method Detection Limit 3. n.d. = Not Detected = less than MDL 4. " - " = Not Regulated 5. The sample(s) was/were analyzed on behalf of the applicant as mixing sample in one testing. The above result(s) was/were only given as the informality value. PFOS Reference Information : POPs - (EU) 757/2010 Outlawing PFOS as substances or preparations in concentrations above 0.001% (10ppm), in semi-finished products or articles or parts at a level above 0.1%(1000ppm), in textiles or other coated materials above 1µg/m².
Page : 5 of 12 #FLOW Analytical flow chart of Heavy Metal These samples were dissolved totally by pre-conditioning method according to below flow chart.(cr 6+ test method excluded) Technician : JR Wang Cutting Preparation Sample Measurement Pb/Cd/Hg Cr 6+ Acid digestion with microwave / hotplate Non-metal Metal Solution Filtration Residue 1) Alkali fusion 2) HCl to dissolve ABS / PC / PVC Dissolving by ultrasonication Digesting at 60 by ultrasonication Others Digesting at 150~160 Separating to get aqueous phase Boiling water extraction Cool, filter digestate through filter ICP-AES ph adjustment Add diphenylcarbazide for color development Add diphenyl-carbazide for color development Measure the absorbance at 540 nm by UV-VIS Measure the absorbance at 540 nm by UV-VIS
Page : 6 of 12 These samples were dissolved totally by pre-conditioning method according to below flow chart. Technician: JR Wang Flow Chart of digestion for the elements analysis performed by ICP-AES Cutting / Preparation Sample Measurement Acid digestion by suitable acid depended on different sample material (as below table) Filtration Solution Residue 1) Alkali Fusion 2) HCl to dissolve ICP-AES Steel, copper, aluminum, solder Glass Gold, platinum, palladium, ceramic Silver Plastic Others Aqua regia, HNO3, HCl, HF, H2O2 HNO3/HF Aqua regia HNO3 H2SO4, H2O2, HNO3, HCl Added appropriate reagent to total digestion
Page : 7 of 12 Analytical flow chart - PFOA/PFOS Technician: Yaling Tu Sample pretreatment Sample extraction by Ultrasonic extraction (Reference method: US EPA 3550C) Concentrate/Dilute Extracted solution Analysis was performed by LC/MS Data
Page : 8 of 12 Analytical flow chart - Halogen Technician: Rita Chen Sample pretreatment / Separation Weighting and putting sample in cell Oxygen Bomb Combustion / Absorption Dilution to fixed volume Analysis was performed by IC
Page : 9 of 12 Analytical flow chart - HBCDD Technician: Yaling Tu Sample pretreatment Sample extraction / Ultrasonic method Concentrate/Dilute Extracted solution Filter Analysis was performed by GC/MS Data
Page : 10 of 12 Analytical flow chart - Phthalate Technician: Andy Hsu Test method: IEC 62321-8 Sample pretreatment/separation Sample dissolved/extracted by THF Dilute Extracted solution Analysis was performed by GC/MS
Page : 11 of 12 Analytical flow chart PBB / PBDE Technician : Yaling Tu First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction / Soxhlet method Concentrate/Dilute Extracted solution Filter GC/MS
Page : 12 of 12 #PIC * The tested sample / part is marked by an arrow if it's shown on the photo. * ** End of Report **