The SI System: FRRB Guide to Scientific Units

Similar documents
APPENDIX D UNIT CONVERSION TABLES. Sl SYMBOLS AND PREFIXES

SI base units. SI : Système International d'unités (International System of Units)

READ ONLY. Adopting Agency BSC SFM. Adopt Entire Chapter X X X X X X X X X Adopt Entire Chapter as amended (amended sections listed below)

UNIT & DIMENSIONS AND MEASUREMENT STRAIGHT LINES

SI UNITS AND SOME CONVERSION FACTORS. A. Woldai, B. Makkawi, and D. Al-Gobaisi International Center for Water and Energy Systems, Abu Dhabi, UAE

Standard physical units

Exact and Measured Numbers

GHANA CIVIL AVIATION (AIR NAVIGATION SERVICES) DIRECTIVES PART 22 - UNITS OF MEASUREMENTS TO BE USED IN AIR AND GROUND OPERATIONS

The SI (mks) Unit System

S I. A concise summary of the International System of Units, SI

General Physics. Prefixes. Aims: The Greek Alphabet Units. Provided Data

N5 H AH Physical Quantity Symbol Unit Unit Abbrev. 5 absorbed dose D gray Gy

Representation of SI Units and Prefixes

10. The State 11. FIRST SCHEDULE SECOND SCHEDULE THIRD SCHEDULE FOURTH SCHEDULE FIFTH SCHEDULE SIXTH SCHEDULE

Advanced Metric Flashcards

PHYSICS 1 (LIFE SCIENCES) ELECTRICITY

SI units are divided into 2 classes: base units (7) and derived units. Athens Programme Course CTU 1 - Metrology of Electrical Quantities.

T m / A. Table C2 Submicroscopic Masses [2] Symbol Meaning Best Value Approximate Value

Cosmological Ouroboros. Sheldon Lee Glashow (Nobel prize in Physics 1979)

For More info visit

State Legislation, Regulation or Document Reference CAR Civil Aviation Rule (CAR) Annex 5 is incorporated by reference in this rule.

UNITS AND DEFINITIONS RELATED TO BIOMECHANICAL AND ELECTROMYOGRAPHICAL MEASUREMENTS

Units of Measurements to be used in air and ground operations.

US Customary System (USC) Systeme Internationale (SI) Prefixes. Units & Significant Figures

Fundamentals of Measurement Systems

THE INTERNATIONAL SYSTEM OF UNITS (SI) SI Base Units. Quantity Name of unit Symbol

Subpart B Standard Application of Units of Measurement. Subpart- C Presentation Of Date And Time In All-Numeric Form

INTERNATIONAL SYSTEM OF UNITS

To begin, a little information about units: Milliliters, liters, gallons and ounces measure (liquid) volume.

US Customary System (USC)

Table of Information and Equation Tables for AP Physics Exams

1) The unit of the coefficient of viscosity in SI system is: a) m/kg-s b) m-s/kg 2 c) kg/m-s 2 d) kg/m-s

PREFIXES AND SYMBOLS SI Prefixes you need to know by heart

APPENDIX B ABBREVIATIONS, SYMBOLS AND CONVERSION FACTORS Abbreviations

Inspec numerical data indexing on EBSCOhost

APPENDIX H CONVERSION FACTORS

MEASUREMENTS. Dimensions of physical quantities

In recording measurements, it is necessary to understand 1. SIGNIFICANCE of numbers 2. importance of UNITS.

1 Fundamental Constants, Elements, Units

The SI Metric System LE SYSTÈME INTERNATIONAL D'UNITÉS ( I N T ERNATI ONA L SYST E M O F U N I T S)

Unit WorkBook 1 Level 4 ENG U3 Engineering Science 2018 Unicourse Ltd. All Rights Reserved. Sample

COPYRIGHTED MATERIAL. Basic Field Vectors. 1.1 The Electric and Magnetic Field Vectors

Introduction to Engineering ENGR System of Units

Explicit-unit formulations of proposed redefinitions of SI base units

288 MODERN SEWER DESIGN. Versatility of steel in sewer construction is typified by application of large diameter structural plate pipe.

Measurements in Chemistry

MYANMAR CIVIL AVIATION REQUIREMENTS

Equation Sheet For Quizzes and Tests

A P P E N D I X C Units and Dimensions 795

Materials and Energy Balance in Metallurgical Processes. Prof. S. C. Koria. Department of Materials Science and Engineering

NAME SYMBOL QUANTITY

Electrical and Electronic Measurements

Table 10-T-11 : Alphabetical Listings of Common Conversions

Al-Saudia Virtual Academy Pakistan Online Tuition Online Tutor Pakistan

Measuring Time, Space, and Matter. Units of Measurement

This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

Inspec on - Numerical Indexing Questel

Notes. Flield INFORMATION SYSTEM ENGINEERING TECHNICAL FOREST SERVICE JUNE 1977 VOLUME NUMBER. Conversion Tables. Metrication-Part 11.

The International System of Units and A Method of Problem Solving Called Dimensional Analysis

03 - measures, conversion tables

LECTURE 4 - Units Used in Measurements

Scientific Measurement

Do Now NOTHING! Someone 6 foot tall and 182 centimeters? Someone who is 182 lbs, 13 stone, or 82.5 kg? 1.5 minutes and 90 seconds?

UNIT 1 UNITS AND DIMENSIONS

FORMAT FOR PREPARATION OF SUMMER INTERNSHIP REPORT-RGUKT

SCC 14 Conventions for Metrication of IEEE Standards Approved October 31, 2017

BIBLIOGRAPHY. Englewood Cliffs, N.J.:Prentice-Hall, 1969.

The effects of electricity

Technical English -I 3 rd week SYSTEMS OF UNITS

Chapter II: Science Practices

The General Conference on Weights and Measures (CGPM), at its 24th meeting,

GCE Physics Transition Work

MOTOR WIRING DATA From National Electrical Code 3 PHASE SQUIRREL CAGE INDUCTION MOTORS 230 Volt 460 Volt Min. # Max. Rating

Measurement and Sig Figs Review

wave speed (metre/second, m/s) = frequency (hertz, Hz) x wavelength (metre, m)

100 Physics Facts. 1. The standard international unit (SI unit) for mass (m) is. kg (kilograms) s (seconds)

Ch. 2 Notes: ANALYZING DATA MEASUREMENT NOTE: Vocabulary terms are in boldface and underlined. Supporting details are in italics.

2 Standards for Measurement. Careful and accurate measurements of ingredients are important both when cooking and in the chemistry laboratory!

3.2 Units of Measurement > Chapter 3 Scientific Measurement. 3.2 Units of Measurement. 3.1 Using and Expressing Measurements

Ch. 2 Notes: ANALYZING DATA MEASUREMENT NOTE: Vocabulary terms are in boldface and underlined. Supporting details are in italics.

Facts themselves are meaningless. It's only the interpretation we give those facts which counts. - Earl Stanley Gardner

16 19 Study Guide. Pocket physics. a handy guide for bright stars

Lesson 2: Put a Label on That Number!

16 19 Study Guide. Pocket physics. a handy guide for bright stars

Security Industry Math Formula Reference us at

RELEVANT DEFINITIONS

PHY Tables & Formulas. You may refer to this handout on quizzes & exams. Do not add additional information. m

Appendix. A.3 Chemical Resistance of Materials 1799 Chemical Resistance of Materials (Table A.3a) 1800

Worksheet 2 Units, Signifiant Figures, Dimensional Analysis, & Density

4. Which instrument is used to measures force and velocity of wind and directions? A. Altimeter B. Ammeter C. Audiometer D.

2 Standards of Measurement

2. Basic Components and Electrical Circuits

Unit Conversions, Important Constants and Relationships

The maximum number of marks available for your answers in SECTION B is 50 marks.

Conversion Tables of Units in Science & Engineering

ECET 211 Electric Machines & Controls

Formulas & Constants

8/17/2016. Summary. Summary. Summary. Chapter 1 Quantities and Units. Passive Components. SI Fundamental Units. Some Important Electrical Units

Dimensional Analysis

STYLE GUIDELINES AND SPECIFICATIONS

Transcription:

FRRB SI Units 1 of 8 The SI System: FRRB Guide to Scientific Units Garry R. Buettner, Ph.D. and Freya Q. Schafer, Ph.D Free Radical and Radiation Biology Program EMRB 68 The University of Iowa Iowa City, IA 52242-1101 The purpose of this document is to provide an easy reference to some of the language of science. We want you to become familiar with the International System of Units (SI) and use them in the preparation of all presentations and documents while a member of FRRB. Detailed information on SI units can be found at: http://physics.nist.gov/cuu/units/ For students, the most common errors are with the following: 1. SI units for time are: s, min, h, d for second(s), minute(s), hour(s) and day(s). 2. Spaces: There is a space between the numerical value and unit symbol, even when the value is used in an adjectival sense (except in the case of the angular degree, e.g. 90. (See Table 2, footnote 4 for more examples.) Examples are: 10 mm, k = 1 x 10 5 M -1 s -1, kilodaltons would be 33 kda,. 3. The liter in Table 2 deserves comment. This unit and its symbol l were adopted by the CIPM in 1879. The alternative symbol for the liter, L, was adopted by the CGPM in 1979 in order to avoid the risk of confusion between the letter l and the number 1. Thus, although both l and L are internationally accepted symbols for the liter, to avoid this risk the preferred symbol for use in the United States is L. 4 Molarity also deserves comment. According to the SI police, molarity is now obsolete. But let s face reality. The world will continue to use M or M or M for the foreseeable future. We recommend for simplicity M, mm, µm etc., but efforts should be made to follow the SI approach. Beware of µm and word processors. It can be changed to mm so easily. Always check! If it will be a concern then use um. (Of course the same problems can occur with µl; it could appear as ml.) 5. Table 2 provides information on how to deal with presenting units and abbreviations in written documents. It should be followed for most presentations, reports, and student theses. Buettner GR & Schafer FQ Page 1

FRRB SI Units 2 of 8 Table 1. NAMES AND SYMBOLS OF SI UNITS Physical Quantity Name of unit Unit symbol Basic units length meter m mass kilogram kg time second s electric current ampere A temperature kelvin K luminous intensity candela cd amount of substance mole mol Derived units area square meter m 2 volume cubic meter m 3 frequency hertz Hz (s -1 ) density kilogram per cubic meter kg/m 3 speed meter per second m/s angular speed radian per second rad/s acceleration meter per second squared m/s 2 angular acceleration radian per second squared rad/s 2 force newton N (kg m/s 2 ) pressure pascal Pa (N/m 2 ) kinematic viscosity sq meter per second m 2 /s dynamic viscosity newton-second per sq meter N s/m 2 work energy, quantity of heat joule J (N m) power, radiant flux watt W (J/s) fluence kilojoule per sq meter kj/m 2 fluence rate watt per sq meter W/m 2 electric charge coulomb C (A s) voltage, potential difference, electromotive force volt V (W/A) Buettner GR & Schafer FQ Page 2

FRRB SI Units 3 of 8 electric field strength volt per meter V/m electric resistance ohm Ω (V/A) electric capacitance farad F (A s/v) magnetic flux weber Wb (V s) inductance henry H (Wb/A) magnetic flux density tesla T (Wb/m 2 ) magnetic field strength ampere per meter A/m magnetomotive force ampere A luminous flux lumen lm (cd sr) luminance candela per sq meter cd/m 2 illuminance lux lx (lm/m 2 ) wave number reciprocal meter m -1 entropy joule per kelvin J/K specific heat joule per kilogram kelvin J (kg K) thermal conductivity watt per m kelvin W/(m K) radiant intensity watt per steradian W/sr activity (of a radioactive source) absorbed dose of ionizing radiation becquerel Bq (s -1 ) gray Supplementary units Gy (J/kg) plane angle* radian rad solid angle steradian sr Buettner GR & Schafer FQ Page 3

FRRB SI Units 4 of 8 Table 2. FREQUENTLY USED SYMBOLS AND ABBREVIATIONS Symbol or Upper case (uc) abbreviation or lower case (lc) Greek (gr), italicized (ital), roman (rom), or script (sc) Meaning and/or special instructions c lc rom centi, as in 10 cm ca. lc ital circa, use period Chl, Chl a, etc. C, uc; h & l, lc rom chlorophyll, chlorophyll a, etc. cis- lc ital on this side of (isomerism) Da D, uc; a, lc rom Dalton Dr., Mr., Ms. n/a n/a most contracted abbreviations diam. lc rom diameter, use period et al. lc ital Latin: and others e.g. lc ital Latin: for example Eq., Eqs., Fig., Figs. leading caps rom use periods g lc rom gram g lc ital gyromagnetic ratio in ESR g lc ital bold face, meaning gravity, as in centrifugation at 100 000 g (does not need times sign) h lc rom hour or hours i.e. lc ital Latin: that is in vitro; in vivo; in situ etc. n/a ital Latin is always italicized J uc rom joule or joules Jpn., etc. n/a n/a use periods K; C; F uc rom degrees Kelvin (no degree sign); degrees Celsius, degrees Fahrenheit (use degree sign) k lc ital rate constant in units of s -1 and/or M -1 s -1 etc. K, K a K, uc; a, lc K,ital; a, rom binding or equilibrium constant kda k, lc; D, uc; a, lc rom kilodaltons Buettner GR & Schafer FQ Page 4

FRRB SI Units 5 of 8 kt k, lc; T, uc rom k, Boltzmann s constant; T, temperature L uc rom liter, as in 100 L or 100 ml (See Table Footnote) m lc rom milli- and/or meter, as in 100 mm M uc ital refers to concentration, e.g. 0.5 M or 0.5 mm (See Table Footnote) mol wt lc rom molecular weight, no periods No. N, uc; o, lc rom number, do not use #, follow o with period P uc ital probability, appears as an inequlity, e.g. (P > 0.05) ph p, lc; H, uc rom negative log of H + pk, pk a p & a, lc; K, uc p & a, rom; K, ital negative log of K; K a s; ns; ps; etc. lc rom second, seconds; nanosecond; picosecond, etc. trans- lc ital across or over (isomerism) µ lc gr mu, or micro USA, DNA, UK, etc. uc n/a no periods with most acronyms V uc rom volt or volts vol/vol, wt/vol, wt/wt, etc. lc rom volume/volume; weight/volume; weight/weight, etc. Do not use v/v, w/v, w/w, etc. W uc rom watt or watts x n/a n/a a cross signifying multiplication Footnote 1: The liter in Table 3 deserves comment. This unit and its symbol l were adopted by the CIPM in 1879. The alternative symbol for the liter, L, was adopted by the CGPM in 1979 in order to avoid the risk of confusion between the letter l and the number 1. Thus, although both l and L are internationally accepted symbols for the liter, to avoid this risk the preferred symbol for use in the United States is L. Footnote 2: Molarity also deserves comment. According to the SI police, molarity is now obsolete. But let s face reality. The world will continue to use M or M or M for Buettner GR & Schafer FQ Page 5

FRRB SI Units 6 of 8 the foreseeable future. We recommend for simplicity M, mm, µm etc. But beware of µm and word processors. It can be changed to mm so easily. Always check! If it will be a concern then use um. (Of course the same problems can occur with µl; it too can appear as ml.) Footnote 3: Journals often have their own rules and idiosyncrasies. Check the Notes to Contributors for each specific journal when preparing work for publication. Footnote 4: Spacing: There is a space between the numerical value and unit symbol, even when the value is used in an adjectival sense, except in the case of superscript units. A space or half-high dot is used to signify the multiplication of units. A solidus (i.e., slash), horizontal line, or negative exponent is used to signify the division of units. The solidus must not be repeated on the same line unless parentheses are used. For Example: proper: The speed of sound is about 344 m s -1 The decay rate of 113 Cs is about 21 ms -1 m/s, m s -2, m kg/(s 3 A), -1 m kg s -3 A m/s, m s -2, m kg/(s 3 A), m kg s -3 A -1 (meters per second) (reciprocal milliseconds) improper: The speed of sound is about 344 ms -1 (reciprocal milliseconds?) The decay rate of 113 Cs is about 21 m s -1 (meters per second?) m s, m/s/s, m kg/s 3 /A??? Thesis Format: We expect students to use standard units, nomenclature, and abbreviations. Buettner GR & Schafer FQ Page 6

FRRB SI Units 7 of 8 Table 3. CONVERSION FACTORS (Alphabetical listing) To convert from to Multiply by acre meter 2 4.406 x 10 3 angstrom meter 1 x 10-10 atmosphere Pa (newton/meter 2 ) 1.013 x 10 5 calorie (thermochemical) joule 4.184 centipoise newton second/m 2 1.0 x 10-3 curie disintegration/second 3.7 x 10 10 day (mean solar) second (mean solar) 8.64 x 10 4 degree (plane angle) radian 1.745 x 10-2 dyne newton 1 x 10-5 electron volt joule 1.602 x 10-19 erg joule 1.0 x 10-7 erg/cm 2 s watt/m 2 1.0 x 10-3 fahrenheit (temperature) kelvin T k = (5/9) (T F + 459.67) faraday coulomb 9.649 x 10 4 foot meter 3.048 x 10-1 foot-candle lumen/meter 1.076 x 10 1 gallon (U.K. liquid) meter 3 4.546 x 10-3 gallon (U.S. liquid) meter 3 3.785 x 10-3 gauss tesla 1.0 x 10-4 inch meter 2.54 x 10-2 kayser reciprocal meter 1.0 x 10 2 kilocalorie (thermochemical) joule 4.184 x 10 3 lux lumen/meter 2 1.00 millibar Pa (newton/meter 2 ) 1.0 x 10 2 millimeter of mercury (at 0 C) Pa (newton/meter 2 ) 1.333 x 10 2 minute (plane angle) radian 2.909 x 10-4 pint (U.S. liquid) meter 3 4.732 x 10-4 poise newton second/meter 2 0.10 Buettner GR & Schafer FQ Page 7

FRRB SI Units 8 of 8 psi Pa (newton/m 2 ) 6.894 x 10 3 rad (radiation dose absorbed) Gy (joule/kilogram) 1.0 x 10-2 roentgen coulomb/kilogram 2.5798 x 10-4 second (plane angle) radian 4.848 x 10-6 torr (at 0 C) Pa (newton/m 2 ) 1.333 x 10 2 watt/cm 2 watt/m 2 1.0 x 10 4 yard meter 9.144 x 10-1 End 04/18/2007 Buettner GR & Schafer FQ Page 8