Sign In Forgot Password Register ashwenchan username password Sign In If you like us, please share us on social media. The latest UCD Hyperlibrary newsletter is now complete, check it out. ChemWiki BioWiki GeoWiki StatWiki PhysWiki MathWiki SolarWiki Periodic Table of the Elements Reference Tables Physical Constants Units & Conversions Lab Techniques ChemWiki: The Dynamic Chemistry E-textbook > Physical Chemistry > Equilibria > Acid-Base Equilibria > 6. Acid-Base Indicators 6. Acid-Base Indicators This page describes how simple acid-base indicators work, and how to choose the right one for a particular titration. How simple indicators work Indicators as weak acids Litmus Litmus is a weak acid. It has a seriously complicated molecule which we will simplify to HLit. The "H" is the proton which can be given away to something else. The "Lit" is the rest of the weak acid molecule. There will be an equilibrium established when this acid dissolves in water. Taking the simplified version of this equilibrium: The un-ionised litmus is red, whereas the ion is blue. Now use Le Chatelier's Principle to work out what would happen if you added hydroxide ions or some more hydrogen ions to this equilibrium. Adding hydroxide ions: Adding hydrogen ions: If the concentrations of HLit and Lit - are equal: At some point during the movement of the position of equilibrium, the concentrations of the two colours will become equal. The colour you see will be a mixture of the two. http://chemwiki.ucdavis.edu/physical_chemistry/equilibria/acid-base_equilibria/6._acid-base_indicators 1/5
The reason for the inverted commas around "neutral" is that there is no reason why the two concentrations should become equal at ph 7. For litmus, it so happens that the 50 / 50 colour does occur at close to ph 7 - that's why litmus is commonly used to test for acids and alkalis. As you will see below, that isn't true for other indicators. Methyl orange Methyl orange is one of the indicators commonly used in titrations. In an alkaline solution, methyl orange is yellow and the structure is: Now, you might think that when you add an acid, the hydrogen ion would be picked up by the negatively charged oxygen. That's the obvious place for it to go. Not so! In fact, the hydrogen ion attaches to one of the nitrogens in the nitrogen-nitrogen double bond to give a structure which might be drawn like this: You have the same sort of equilibrium between the two forms of methyl orange as in the litmus case - but the colours are different. You should be able to work out for yourself why the colour changes when you add an acid or an alkali. The explanation is identical to the litmus case - all that differs are the colours. In the methyl orange case, the half-way stage where the mixture of red and yellow produces an orange colour happens at ph 3.7 - nowhere near neutral. This will be explored further down this page. Phenolphthalein Phenolphthalein is another commonly used indicator for titrations, and is another weak acid. In this case, the weak acid is colourless and its ion is bright pink. Adding extra hydrogen ions shifts the position of equilibrium to the left, and turns the indicator colourless. Adding hydroxide ions removes the hydrogen ions from the equilibrium which tips to the right to replace them - turning the indicator pink. The half-way stage happens at ph 9.3. Since a mixture of pink and colourless is simply a paler pink, this is difficult to detect with any accuracy! The ph range of indicators The importance of pk ind Think about a general indicator, HInd - where "Ind" is all the rest of the indicator apart from the hydrogen ion which is given away: Because this is just like any other weak acid, you can write an expression for K a for it. We will call it K ind to stress that we are talking about the indicator. Think of what happens half-way through the colour change. At this point the concentrations of the acid and its ion are equal. In that case, they will cancel out of the K ind expression. You can use this to work out what the ph is at this half-way point. If you re-arrange the last equation so that the hydrogen ion concentration is on the left-hand side, and then convert to ph and pk ind, you get: http://chemwiki.ucdavis.edu/physical_chemistry/equilibria/acid-base_equilibria/6._acid-base_indicators 2/5
That means that the end point for the indicator depends entirely on what its pk ind value is. For the indicators we've looked at above, these are: indicator pk ind litmus 6.5 methyl orange 3.7 phenolphthalein 9.3 The ph range of indicators Indicators don't change colour sharply at one particular ph (given by their pk ind ). Instead, they change over a narrow range of ph. Assume the equilibrium is firmly to one side, but now you add something to start to shift it. As the equilibrium shifts, you will start to get more and more of the second colour formed, and at some point the eye will start to detect it. For example, suppose you had methyl orange in an alkaline solution so that the dominant colour was yellow. Now start to add acid so that the equilibrium begins to shift. At some point there will be enough of the red form of the methyl orange present that the solution will begin to take on an orange tint. As you go on adding more acid, the red will eventually become so dominant that you can no longe see any yellow. There is a gradual smooth change from one colour to the other, taking place over a range of ph. As a rough "rule of thumb", the visible change takes place about 1 ph unit either side of the pk ind value. The exact values for the three indicators we've looked at are: indicator pk ind ph range litmus 6.5 5-8 methyl orange 3.7 3.1-4.4 phenolphthalein 9.3 8.3-10.0 The litmus colour change happens over an unusually wide range, but it is useful for detecting acids and alkalis in the lab because it changes colour around ph 7. Methyl orange or phenolphthalein would be less useful. This is more easily seen diagramatically. For example, methyl orange would be yellow in any solution with a ph greater than 4.4. It couldn't distinguish between a weak acid with a ph of 5 or a strong alkali with a ph of 14. Choosing indicators for titrations Remember that the equivalence point of a titration is where you have mixed the two substances in exactly equation proportions. You obviously need to choose an indicator which changes colour as close as possible to that equivalence point. That varies from titration to titration. Strong acid v strong base The next diagram shows the ph curve for adding a strong acid to a strong base. Superimposed on it are the ph ranges for methyl orange and phenolphthalein. http://chemwiki.ucdavis.edu/physical_chemistry/equilibria/acid-base_equilibria/6._acid-base_indicators 3/5
You can see that neither indicator changes colour at the equivalence point. However, the graph is so steep at that point that there will be virtually no difference in the volume of acid added whichever indicator you choose. However, it would make sense to titrate to the best possible colour with each indicator. If you use phenolphthalein, you would titrate until it just becomes colourless (at ph 8.3) because that is as close as you can get to the equivalence point. On the other hand, using methyl orange, you would titrate until there is the very first trace of orange in the solution. If the solution becomes red, you are getting further from the equivalence point. Strong acid v weak base This time it is obvious that phenolphthalein would be completely useless. However, methyl orange starts to change from yellow towards orange very close to the equivalence point. You have to choose an indicator which changes colour on the steep bit of the curve. Weak acid v strong base This time, the methyl orange is hopeless! However, the phenolphthalein changes colour exactly where you want it to. Weak acid v weak base The curve is for a case where the acid and base are both equally weak - for example, ethanoic acid and ammonia solution. In other cases, the equivalence point will be at some other ph. http://chemwiki.ucdavis.edu/physical_chemistry/equilibria/acid-base_equilibria/6._acid-base_indicators 4/5
You can see that neither indicator is any use. Phenolphthalein will have finished changing well before the equivalence point, and methyl orange falls off the graph altogether. It may be possible to find an indicator which starts to change or finishes changing at the equivalence point, but because the ph of the equivalence point will be different from case to case, you can't generalise. On the whole, you would never titrate a weak acid and a weak base in the presence of an indicator. Sodium carbonate solution and dilute hydrochloric acid This is an interesting special case. If you use phenolphthalein or methyl orange, both will give a valid titration result - but the value with phenolphthalein will be exactly half the methyl orange one. It so happens that the phenolphthalein has finished its colour change at exactly the ph of the equivalence point of the first half of the reaction in which sodium hydrogencarbonate is produced. The methyl orange changes colour at exactly the ph of the equivalence point of the second stage of the reaction. Copyright 2015 Chemwiki Powered by MindTouch Unless otherwise noted, content in the UC Davis ChemWiki is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License. Permissions beyond the scope of this license may be available at copyright@ucdavis.edu. Questions and concerns can be directed toward Prof. Delmar Larsen (dlarsen@ucdavis.edu), Founder and Director. Terms of Use http://chemwiki.ucdavis.edu/physical_chemistry/equilibria/acid-base_equilibria/6._acid-base_indicators 5/5