Surface Mount ESD Capability Rectifier MSQPG, MSQPJ esmp Series op View Bottom View MicroSMP (DO-29AD) PRIMARY CHARACERISICS I F(AV).0 A V RRM 400 V, 600 V I FSM 5 A V F at I F =.0 A 0.99 V J max. 75 C Package MicroSMP (DO-29AD) Circuit configuration Single FEAURES Very low profile - typical height of 0.65 mm Available Ideal for automated placement Oxide planar chip junction Low forward voltage drop, low leakage current ESD capability Meet MSL level, per J-SD-020, LF maximum peak of 260 C AEC-Q0 qualified available - Automotive ordering code: base P/NHM3 Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 YPICAL APPLICAIONS General purpose, polarity protection, and rail-to-rail protection in both consumer and automotive applications. MECHANICAL DAA Case: MicroSMP (DO-29AD) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q0 qualified erminals: matte tin plated leads, solderable per J-SD-002 and JESD 22-B02 M3 and HM3 suffix meet JESD 20 class 2 whisker test Polarity: color band denotes the cathode end MAXIMUM RAINGS ( A = 25 C, unless otherwise noted) PARAMEER SYMBOL MSQPG MSQPJ UNI Device marking code QG QJ Max. repetitive peak reverse voltage V RRM 400 600 V Max. average forward rectified current (fig. ) I F(AV).0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 5 A Operating junction and storage temperature range J, SG -55 to +75 C ELECRICAL CHARACERISICS ( A = 25 C, unless otherwise noted) PARAMEER ES CONDIIONS SYMBOL YP. MAX. UNI Max. instantaneous forward voltage I F = 0.5 A 0.99 - A = 25 C I F =.0 A V ().09.2 F I F = 0.5 A 0.88 - A = 25 C I F =.0 A 0.99.05 V A = 25 C Max. reverse current Rated V R I (2) -.0 R A = 25 C 6.0 50 μa ypical reverse recovery time I F = 0.5 A, I R =.0 A, I rr = 0.25 A t rr 650 - ns ypical junction capacitance 4.0 V, MHz C J 4 - pf () Pulse test: 300 μs pulse width, % duty cycle (2) Pulse test: Pulse width 40 ms Revision: 28-Sep-7 Document Number: 87547 HIS DOCUMEN IS SUBJEC O CHANGE WIHOU NOICE. HE PRODUCS DESCRIBED HEREIN AND HIS DOCUMEN ARE SUBJEC O SPECIFIC DISCLAIMERS, SE FORH A www.vishay.com/doc?9000
MSQPG, MSQPJ HERMAL CHARACERISICS ( A = 25 C, unless otherwise noted) PARAMEER SYMBOL MSQPG MSQPJ UNI ypical thermal resistance R JA ()(2) 0 R JM (2) 30 () he heat generated must be less than the thermal conductivity from junction to ambient: dp D /d J < /R JA (2) hermal resistance R JA junction to ambient and R JM - mounted on PCB with 6.0 mm x 6.0 mm copper pad areas. C/W IMMUNIY O ELECRICAL SAIC DISCHARGE O HE FOLLOWING SANDARDS ( A = 25 C, unless otherwise noted) SANDARD ES YPE ES CONDIIONS SYMBOL CLASS VALUE AEC-Q0-00 Human body model (contact mode) C = 00 pf, R =.5 k H3B > 8 kv AEC-Q0-002 Machine model (contact mode) C = 200 pf, R = 0 M4 > 400 V JESD 22-A4 Human body model (contact mode) C = 00 pf, R =.5 k V C 3B > 8 kv JESD 22-A5 Machine model (contact mode) C = 200 pf, R = 0 C > 400 V IEC 6000-4-2 (2) Human body model (contact mode) C = 50 pf, R = 330 4 > 8 kv Human body model (air-discharge mode) () C = 50 pf, R = 330 4 > 5 kv () Immunity to IEC 6000-4-2 air discharge mode has a typical performance > 30 kv (2) System ESD standard ORDERING INFORMAION (Example) PREFERRED P/N UNI WEIGH (g) PREFERRED PACKAGE CODE BASE QUANIY DELIVERY MODE MSQPJ-M3/H 0.006 H 4500 7" diameter plastic tape and reel MSQPJHM3/H () 0.006 H 4500 7" diameter plastic tape and reel Note () AEC-Q0 qualified RAINGS AND CHARACERISICS CURVES ( A = 25 C unless otherwise noted) Average Forward Rectified Current (A).2.0 0.8 0.6 0.4 0.2 0 95 05 5 25 35 45 55 65 75 Average Power Loss (W).4.2.0 0.8 0.6 0.4 0.2 0.0 D = 0.8 D = 0.5 D = 0.3 D =.0 D = 0.2 D = 0. D = t p / t p 0 0.2 0.4 0.6 0.8.2 Mount emperature ( C) Average Forward Current (A) Fig. - Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 28-Sep-7 2 Document Number: 87547 HIS DOCUMEN IS SUBJEC O CHANGE WIHOU NOICE. HE PRODUCS DESCRIBED HEREIN AND HIS DOCUMEN ARE SUBJEC O SPECIFIC DISCLAIMERS, SE FORH A www.vishay.com/doc?9000
MSQPG, MSQPJ Instantaneous Forward Current (A) 0 J = 75 C J = 50 C J = 00 C 0. J = 75 C J = -40 C 0.0 0.4 0.6 0.8.0.2.4 Junction Capacitance (pf) 00 0 f =.0 MHz V sig = 50 mv p-p 0. 0. 0 00 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - ypical Instantaneous Forward Characteristics Fig. 6 - ypical ransient hermal Impedance Instantaneous Reverse Current ( A) 00 J = 75 C 0 J = 50 C J = 00 C J = 75 C 0. 0.0 J = -40 C 0.00 0 20 30 40 50 60 70 80 90 00 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - ypical Reverse Leakage Characteristics ransient hermal Impedance ( C/W) 000 Junction to ambient 00 0 0.0 0. 0 00 000 t - Pulse Duration (s) Fig. 7 - hermal Resistance Junction Capacitance (pf) 00 0 f =.0 MHz V sig = 50 mv p-p 0. 0. 0 00 Reverse Voltage (V) Fig. 5 - ypical Junction Capacitance Revision: 28-Sep-7 3 Document Number: 87547 HIS DOCUMEN IS SUBJEC O CHANGE WIHOU NOICE. HE PRODUCS DESCRIBED HEREIN AND HIS DOCUMEN ARE SUBJEC O SPECIFIC DISCLAIMERS, SE FORH A www.vishay.com/doc?9000
MSQPG, MSQPJ PACKAGE OULINE DIMENSIONS in inches (millimeters) MicroSMP (DO-29AD) Cathode Band 0.059 (.50) 0.043 (.0) 0.030 (0.75) 0.022 (0.55) 0.055 (.40) 0.047 (.20) 0.039 (0.98) 0.03 (0.78) 0.030 (0.75) 0.022 (0.55) 0.09 (2.30) 0.083 (2.0) 0.06 (2.70) 0.09 (2.30) Mounting Pad Layout 0.079 (2.00) 0.032 (0.80) 0.029 (0.73) 0.025 (0.63) 0.043 (.0) 0.032 (0.80) 0.0 (0.27) 0.005 (0.2) 0.020 (0.50) Revision: 28-Sep-7 4 Document Number: 87547 HIS DOCUMEN IS SUBJEC O CHANGE WIHOU NOICE. HE PRODUCS DESCRIBED HEREIN AND HIS DOCUMEN ARE SUBJEC O SPECIFIC DISCLAIMERS, SE FORH A www.vishay.com/doc?9000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUC, PRODUC SPECIFICAIONS AND DAA ARE SUBJEC O CHANGE WIHOU NOICE O IMPROVE RELIABILIY, FUNCION OR DESIGN OR OHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. o the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INERECHNOLOGY, INC. ALL RIGHS RESERVED Revision: 08-Feb-7 Document Number: 9000