Sight Glass and Moisture Indicator Virginia KMP LDE DIMENSIONS: Dimension Dimension Connection Type "A" "B" Inches (mm) Inches (mm) LDE2 1/4 Male X 1/4 Male 2-7/8 72 1-7/ 36 LDE2S 1/4 Sweat X 1/4 Sweat 5 126 1-7/ 36 LDE2MF 1/4 Male X 1/4 Female 2-68 1-7/ 36 LDE3 Male X Male 3-85 1-7/ 36 LDE3S Sweat X Sweat 5 126 1-7/ 36 LDE3MF Male X Female 3-1/8 79 1-7/ 36 LDE4 Male X Male 4-1/8 105 1-7/ 36 LDE4S Sweat X Sweat 5 126 1-7/ 36 LDE4MF Male X Female 3-7/ 87 1-7/ 36 LDE5 Male X Male 4-1/8 105 1-7/ 36 LDE5S Sweat X Sweat 5 126 1-7/ 36 LDE5MF Male X Female 3-7/8 98 1-7/ 36 LDE6 3/4 Male X 3/4 Male 4-114 2-1/32 52 LDE6S 3/4 Sweat X 3/4 Sweat 5-159 2-1/32 52 LDE7S 7/8 Sweat X 7/8 Sweat 5-159 2-1/32 52 LDE9S 1-1/8 Sweat X 1-1/8 Sweat 5-159 2-1/32 52 NON-WARRANTY - All data, statements and recommendations contained herein are based upon the best information available and are believed to be reliable. However, no warranty, either expressed or implied, is made concerning the application of this product since the customer's use cannot be controlled. Statements concerning the use of this product should not be construed as suggestions, recommendations or inducements that it be used in violation of patent rights or in violation of any applicable laws or regulations. Product improvement is a continuous process at Virginia KMP Corp., therefore, product specifications may change without notice. Please contact your VKMP representative or distributor to verify details. Hong Kong Tel: +852 8108 2998 Fax: +852 8106 3196 France Tel: +33 437 420008 Fax: +33 478 495653 Germany Tel: +49 22 9 907 Fax: +49 22 9 910 Italy Tel: +39 02 45 708 663 Fax: +390245708600 Virginia KMP Corp. 00 Platinum Way Dallas, Texas 237 USA Tel: 800 285 8567 Fax: 800 877 8567 E-Mail: info@virginiakmp.com Website: www.virginiakmp.com England Tel: +44 1226 273 400 Fax: +44 1226 273 401 Copyright 1999 Virginia KMP Corp. LDE - Version 3 - /99
Virginia KMP WLD The World WLD model is our premium liquid line filter drier. The internal construction of the WLD series driers has been designed to enhance performance and dependability. The use of carefully selected desiccants makes the WLD series filter drier compatible with CFC, HCFC and HFC refrigerants and the lubricants used in conjunction with them. The desiccant provides for extraordinarily high moisture capacity and acid removal. A larger volume of filter media before and after the desiccant provides for increased holding capacity of particulate matter down to 10 microns in size. Both the filter media and desiccant are protected from impact by an inlet baffle which also aids in reducing the entering refrigerant velocity and directs the flow evenly over the filter media. All of the internal components are held firmly in place by a cylindrical spring which also provides rigid compacting of the desiccant. Availability with solder or flare connectors, in inch or millimeter sizes, expands the versatility of this filter drier to meet a broad range of installation requirements. These units may also be special ordered with the optional -O o-ring connector. Manufactured in the USA in our ISO 9001 registered facility, the World driers are UL listed (SA1906) and CSA approved (LR494), and are rated per the ARI 710-86 standard. Intended for worldwide application, a World filter drier available in Europe or Asia is identical to those in North America, so wherever the equipment came from or wherever it goes - exact WLD filter driers will be available. CHARACTERISTICS: Compacted bead, spring loaded design. Superior moisture removal capacity. Acid removal capability. Very low pressure drop. Filtration down to 10 microns. Hard wrought copper connectors. Large wrench flats on flare connectors. Available in inch or millimeter sizes. Standard lay-in lengths. Highly shock resistant design. Powder coated finish is 1000 hours salt spray rated. 500 psig (35 bar) safe working pressure. -MI OPTION The WLD, WAH and V2A series may be special ordered with a moisture indicator built into the outlet shell closure. This indicator changes color from blue to pink, showing the technician when the drier needs to be replaced. To order, simply add the -MI suffix to the part number (eg. WLD3SMI). APPLICATIONS: For installation in the liquid line of any air conditioning or refrigeration system which requires the maximum protection from, or removal of moisture, contaminants and dirt. COMPATIBILITY: CFC, HCFC and HFC refrigerants. Mineral oils, alkylbenzene (AB), polyol ester (POE) and polyalkylene glycol (PAG) lubricants.
Virginia KMP WLD DIMENSIONS: "B" "C" "A" Cu. In. Fitting Type Overall Length Dimensions: Inches (Millimeters) Diameter Lay-in Length " A" " B" "C" WLD032 3 1/4 4-1/ 4 ( 108) WLD032FM 3 1/4 Female X Male 4-1/ 4 ( 108) WLD032MF 3 1/4 Male X Female 4-1/ 4 ( 108) WLD032S 3 1/4 4-1/ ( 103) 3-7/ (87) WLD06MM 3 6mm 4-1/ ( 103) 3-7/ (87) WLD033 3 4-3/ 4 ( 121) WLD033S 3 4-1/ ( 103) 3-7/ (87) WLD052 5 1/4 4-5/ 8 ( 118) WLD052MF 5 1/4 Male X Female 4-5/ 8 ( 118) WLD052S 5 1/4 4-7/ ( 113) 3-13/ (97) WLD0506MM 5 6mm 4-7/ ( 113) 3-13/ (97) WLD0525S 5 5/ 4-7/ ( 113) 3-13/ (97) WLD053 5 5-1/ 8 ( 1) WLD053S 5 4-1/ 2 ( 114) 3-3/ 4 (95) WLD0510MM 5 10mm 4-1/ 2 ( 114) 3-3/ 4 (95) WLD082 8 1/4 4-1/ 2 ( 140) WLD082S 8 1/4 5-5/ 4-11/ WLD0806MM 8 6mm 5-5/ 4-11/ 119 WLD0825S 8 5/ 5-5/ 4-11/ 119 WLD083 8 6 ( 152) WLD083S 8 5-5/ 4-11/ WLD0810MM 8 10mm 5-5/ 4-11/ WLD084 8 6-3/ ( 157) WLD084S 8 5-5/ 4-11/ WLD0812MM 8 12mm 5-5/ 4-11/ WLD2 1/4 6-1/ 4 ( 159) WLD2S 1/4 6-1/ 5-7/ (138) WLD25S 5/ 6-1/ 5-7/ (138) WLD3 6-3/ 4 ( 172) WLD3S 6-1/ 5-7/ (138) WLD10MM 10mm 6-1/ 5-7/ (138) WLD4 6-15/ ( 176) WLD4S 6-1/ 5-3/ 8 (137) WLD12MM 12mm 6-1/ 5-3/ 8 (137) WLD5 7-1/ 4 ( 184) WLD5S 6-5/ ( 0) 5-5/ (135) WLD3 9-3/ 4 ( 248) WLD3S 9-1/ 8 ( 232) 8-7/ (214) WLD4 9-15/ ( 253) WLD4S 9-1/ 8 ( 232) 8-3/ 8 (213) WLD12MM 12mm 9-1/ 8 ( 232) 8-3/ 8 (213) WLD5 10-1/ 4 ( 260) WLD5S 9-5/ 8 ( 245) 8-15/ (211) WLD7S 7/8 10-3/ ( 259) 8-5/ 8 (219)
Virginia KMP WLD DIMENSIONS: Cu. In. Fitting Type Overall Length Dimensions: Inches (Millimeters) Diameter Lay-in Length " A" " B" "C" WLD3 9-7/ 8 ( 251) WLD3S 9-1/ 4 ( 235) 8-1/ 2 (2) WLD4 10-1/ ( 256) WLD4S 9-1/ 4 ( 235) 8-1/ 2 (2) WLD12MM 12mm 9-1/ 4 ( 235) 8-1/ 2 (2) WLD5 10-3/ 8 ( 264) WLD5S 9-3/ 4 ( 248) 8-7/ (214) WLD7S 7/8 10-5/ ( 260) 8-3/ 4 (222) WLD4 13-1/ 2 ( 342) WLD4S 13-1/ ( 331) 11-7/ 8 (1) WLD5 13-3/ 4 ( 349) WLD5S 12-7/ 8 ( 327) 11-7/ 8 (1) WLD6 3/4 14-7/ ( 366) WLD6S 3/4 13-1/ 8 ( 333) 11-7/ 8 (1) WLD7S 7/8 13-3/ 4 ( 349) 12-1/ (6) WLD9S 1-1/8 14 ( 356) 12-3/ (310) FLOW CAPACITY: Due to the revision of ARI 710-86, pressure drop ratings have decreased from 2 psig to 1 psig. This has resulted in lower flow capacities than in previously published manufacturer s specs. R-12 R-22 Flow Capacity in Tons @ 1 psid (kw @ 0.07 bar) per ARI 710-86 Rating Conditions R-134a R-404A /R-507 R-407C R-502 WLD 032 (FM) (MF) (S) 1. 3 ( 4.7) 1. 7 ( 5.9) 1. 7 ( 5.9) 1. 2 (4.2) WLD 06MM 1. 3 ( 4.7) 1. 7 ( 5.9) 1. 7 ( 5.9) 1. 2 (4.2) WLD 033 (S) 3. 3 ( 5) 4. 5 ( 9) 4. 2 ( 6) 3. 2 ( 2) 4. 5 ( 9) 3 (5) WLD 052 (MF) (S) 1. 4 ( 5.0) 2 ( 6.9) 1. 8 ( 6.3) 2 ( 6.9) 1. 3 (4.6) WLD 0506MM 1. 4 ( 5.0) 2 ( 6.9) 1. 8 ( 6.3) 2 ( 6.9) 1. 3 (4.6) WLD 0525S 2. 1 ( 7.2) 2. 8 ( 0) 2. 6 ( 9.1) 2. 5 ( 9.0) 2. 8 ( 0) 1. 8 (6.6) WLD 053 (S) 3. 7 ( 13.0) 5. 1 ( 17.9) 4. 7 (.4) 3. 6 ( 7) 5. 1 ( 17.9) 3. 3 (8) WLD 0510MM 3. 7 ( 13.0) 5. 1 ( 17.9) 4. 7 (.4) 3. 6 ( 7) 5. 1 ( 17.9) 3. 3 (8) WLD 082 (S) 1. 6 ( 5.4) 1. 9 ( 6.9) 1. 5 ( 5.3) 1. 4 (5.0) WLD 0806MM 1. 6 ( 5.4) 1. 9 ( 6.9) 1. 5 ( 5.3) 1. 4 (5.0) WLD 0825S 2. 3 ( 8.3) 3. 3 ( 5) 3. 0 ( 5) 3 ( 5) 3. 3 ( 6) 2. 1 (7.6) WLD 083 (S) 3. 8 ( 13.4) 5. 2 ( 18.4) 4. 8 (.8) 3. 7 ( 13.0) 5. 2 ( 18.4) 3. 5 (2) WLD 0810MM 3. 8 ( 13.4) 5. 2 ( 18.4) 4. 8 (.8) 3. 7 ( 13.0) 5. 2 ( 18.4) 3. 5 (2) WLD 084 (S) 5. 7 ( 20.2) 7. 9 ( 27.9) 7. 2 ( 25.5) 5. 6 ( 19.7) 7. 9 ( 27.9) 5. 2 (18.4) WLD 0812MM 5. 7 ( 20.2) 7. 9 ( 27.9) 7. 2 ( 25.5) 5. 6 ( 19.7) 7. 9 ( 27.9) 5. 2 (18.4) WLD 2 (S) 1. 6 ( 5.4) 1. 9 ( 6.9) 1. 5 ( 5.3) 1. 4 (5.0) WLD 25S 2. 5 ( 8.6) 3. 4 ( 0) 3. 1 ( 9) 3. 1 ( 9) 3. 4 ( 0) 2. 3 (7.9) WLD 3 (S) 4. 2 ( 8) 5. 8 ( 20.4) 5. 3 ( 18.7) 4. 1 ( 4) 5. 8 ( 20.4) 3. 8 (13.4) WLD 10MM 4. 2 ( 8) 5. 8 ( 20.4) 5. 3 ( 18.7) 4. 1 ( 4) 5. 8 ( 20.4) 3. 8 (13.4) WLD 4 (S) 7. 6 ( 26.7) 9. 5 ( 33.7) 7. 4 ( 26.0) 6. 9 (24.3) WLD 12MM 7. 6 ( 26.7) 9. 5 ( 33.7) 7. 4 ( 26.0) 6. 9 (24.3) WLD 5 (S) 2 ( 35.9) 1 ( 49.5) 9 ( 45.3) 10 ( 35.0) 1 ( 49.5) 9. 3 (32.6) WLD 3 (S) 4. 3 ( 1) 5. 9 ( 20.9) 5. 4 ( 19.1) 5. 4 ( 19.0) 5. 9 ( 20.9) 3. 9 (13.8) WLD 4 (S) 8. 3 ( 29.2) 5 ( 40.3) 8. 1 ( 28.5) 5 ( 40.3) 7. 6 (26.6) WLD 12MM 8. 3 ( 29.2) 5 ( 40.3) 8. 1 ( 28.5) 5 ( 40.3) 7. 6 (26.6) WLD 5 (S) 5 ( 37.1) 6 ( 51.3) 13. 3 ( 46.9) 3 ( 36.2) 6 ( 51.3) 9. 6 (33.8) WLD 7S 8 ( 45.0) 17. 7 ( 62.2). 2 ( 56.9) 5 ( 44.0) 17. 7 ( 62.2) 7 (.0) WLD 3 (S) 4. 5 ( 7) 6. 2 ( 21.6) 5. 7 ( 19.8) 5. 6 ( 19.6) 6. 2 ( 21.6) 4 (3) WLD 4 (S) 8. 7 (.6) 12 ( 42.3) 0 ( 38.7) 8. 5 ( 29.9) 12 ( 42.3) 7. 9 (27.9) WLD 12MM 8. 7 (.6) 12 ( 42.3) 0 ( 38.7) 8. 5 ( 29.9) 12 ( 42.3) 7. 9 (27.9) WLD 5 (S) 3 ( 39.7) 6 ( 54.7) 2 ( 50.1) 11 ( 38.7) 6 ( 54.7) 3 (36.1) WLD 7S 9 ( 55.9) 21. 9 ( 77.1) 20. 1 ( 70.5) 5 ( 54.5) 21. 9 ( 77.1) 4 (50.8) WLD 4 (S) 9. 8 ( 34.5) 13. 5 ( 47.5) 4 ( 43.5) 9. 8 ( 34.5) 13. 5 ( 47.5) 8. 9 (31.3) WLD 5 (S) 4 ( 43.8) 17. 2 ( 60.5) 7 ( 55.9) 1 ( 42.5) 17. 2 ( 60.5) 3 (39.7) WLD 6 (S) 4 ( 50.4) 19. 7 ( 69.4) 18. 0 ( 63.4) 13. 9 ( 48.9) 19. 7 ( 69.4) 13 (45.8) WLD 7S. 9 ( 59.5) 23. 3 ( 82.1) 21. 4 (.1). 5 ( 58.1) 23. 3 ( 82.1) 4 (54.1) WLD 9S 24. 6 ( 86.6) 33. 9 ( 119.4) 31. 0 ( 109.2) 24 ( 84.4) 33. 9 ( 119.4) 22. 3 (78.7)
Virginia KMP WLD LIQUID HOLDING CAPACITY: R-12 R-22 Liquid Refrigerant Holding Capacity in Ounces @ 100 F (Grams @ 40 C) R-134a R-404A / R-507 R-407C R-502 WLD03 3. 5 ( 99) 3. 2 ( 91) 3. 2 ( 91) 2. 7 ( 77) 3. 0 ( 85) 3. 3 (94) WLD05 4. 2 ( 119) 3. 8 ( 108) 3. 8 ( 108) 3. 2 ( 91) 3. 6 ( 102) 3. 9 (111) WLD08 8. 4 ( 238) 7. 6 ( 215) 7. 7 ( 218) 6. 5 ( 184) 7. 2 ( 204) 7. 8 (221) WLD 4 ( 295) 9. 4 ( 266) 9. 5 ( 269) 8. 0 ( 227) 8. 9 ( 252) 9. 7 (2) WLD 28. 2 ( 799) 25. 5 ( 723) 25. 7 ( 729) 21. 8 ( 618) 24. 1 ( 683) 26. 2 (743) WLD 38. 1 ( 1080) 34. 5 ( 978) 34. 8 ( 987) 29. 5 ( 836) 32. 6 ( 924) 35. 4 (1004) WLD 55. 8 ( 1581) 50. 5 ( 1431) 50. 9 ( 1443) 43. 2 ( 1225) 47. 8 ( 1355) 51. 9 (1471) MOISTURE HOLDING CAPACITY: Drying Capacity in Drops (Grams) of Water R-12 R-22 R-134a F ( 24 C) F ( 52 C) F ( 24 C) F ( 52 C) F ( 24 C) F (52 C) WLD03 93. 0 ( 4.6) 86. 0 ( 4.3) 78. 0 ( 3.9) 69. 0 ( 3.4) 90. 0 ( 4.5) 85 (4.2) WLD05 1. 0 ( 8.0) 149. 0 ( 7.4) 136. 0 ( 6.8) 119. 0 ( 5.9) 156. 0 ( 7.8) 148 (7.4) WLD08 377. 0 ( 18.8) 348. 0 ( 17.4) 317. 0 ( 8) 279. 0 ( 13.9) 364. 0 ( 18.2) 346 (17.3) WLD 5 0 ( 25.5) 472. 0 ( 23.6) 4. 0 ( 21.5) 378. 0 ( 18.9) 494. 0 ( 24.7) 469 (23.4) WLD 9 0 ( 45.7) 845. 0 ( 42.2) 769. 0 ( 38.4) 676. 0 ( 33.8) 884. 0 ( 44.2) 839 (.9) WLD 1481. 0 ( 74.0) 1368. 0 ( 68.4) 1244. 0 ( 62.2) 1095. 0 ( 54.7) 1431. 0 ( 71.5) 1357 (67.8) WLD 2692. 0 ( 134.6) 2487. 0 ( 124.3) 2262. 0 ( 113.1) 1990. 0 ( 99.5) 2601. 0 ( 1.0) 2467 (123.3) R-404A/R-507 Drying Capacity in Drops (Grams) of Water R-407C R-502 F ( 24 C) F ( 52 C) F ( 24 C) F ( 52 C) F ( 24 C) F (52 C) WLD03 70. 0 ( 3.5) 67. 0 ( 3.3). 0 ( 3.7) 66. 0 ( 3.3) 79. 0 ( 3.9) 70 (3.5) WLD05 121. 0 ( 6.0) 1. 0 ( 5.8) 131. 0 ( 6.5) 1 0 ( 6.5) 137. 0 ( 6.8) 121 (6.0) WLD08 282. 0 ( 1) 270. 0 ( 13.5) 4. 0 ( 2) 267. 0 ( 13.3) 320. 0 (.0) 282 (1) WLD 382. 0 ( 19.1) 366. 0 ( 18.3) 3. 0 ( 20.6) 363. 0 ( 18.1) 434. 0 ( 21.7) 382 (19.1) WLD 684. 0 ( 34.2) 655. 0 ( 32.7) 738. 0 ( 36.9) 649. 0 ( 32.4) 777. 0 ( 38.8) 683 (34.1) WLD 1106. 0 ( 55.3) 1060. 0 ( 53.0) 1194. 0 ( 59.7) 1051. 0 ( 52.5) 1257. 0 ( 62.8) 1105 (55.2) WLD 20 0 ( 100.5) 1927. 0 ( 96.3) 2172. 0 ( 108.6) 19 0 ( 95.5) 2284. 0 ( 12) 2009 (100.4) NON-WARRANTY - All data, statements and recommendations contained herein are based upon the best information available and are believed to be reliable. However, no warranty, either expressed or implied, is made concerning the application of this product since the customer's use cannot be controlled. Statements concerning the use of this product should not be construed as suggestions, recommendations or inducements that it be used in violation of patent rights or in violation of any applicable laws or regulations. Product improvement is a continuous process at Virginia KMP Corp., therefore, product specifications may change without notice. Please contact your VKMP representative or distributor to verify details. Virginia KMP Corp. 00 Platinum Way Dallas, Texas 237 USA Tel: 800 285 8567 Fax: 800 877 8567 E-Mail: info@virginiakmp.com Hong Kong Tel: +852 8108 2998 Fax: +852 8106 3196 France Tel: +33 437 420008 Fax: +33 478 495653 Germany Tel: +49 36338 63532 Fax: +49 36338 62690 Italy Tel: +39 02 90 59451 Fax: +39 02 90 594 550 England Tel: +44 1226 273400 Fax: +44 1226 273401 Copyright 1999 Virginia KMP Corp. WLD - Version 3-3/9/99
Suction Line Filter Driers Virginia KMP WSL The Virginia KMP World WSL suction line filter drier is designed for use with most refrigerant/lubricant combinations. The WSL has been designed to provide a minimal pressure drop at the high flow rates of suction gas. Filtration of particles down to 10 microns in size is accomplished by both inlet and outlet filter pads. The WSL has been designed so that refrigerant will travel through the sides of the filter media to maximize filtration and to prevent "front end loading", maintaining a low pressure drop across the vessel. Acid and moisture removal is accomplished by a large volume of activated alumina in the heart of the filter drier. Internal components, including the desiccant bed, baffle, spider bracket and the inlet and outlet filter media, are compressed and held firmly in place by a special cylindrical spring applying pressure to the inlet and outlet retention screens. Availability with solder or flare connections, in inch or millimeter sizes, expands the versatility of this filter drier to meet a broad range of industry requirements. Manufactured in the USA in our ISO 9001 registered facility, the World driers are UL listed (SA1906) and CSA approved (LR494), and are rated per the ARI 7-86 standard. Intended for worldwide application, a World filter drier available in Europe or Asia is identical to those in North America, so wherever the equipment came from or wherever it goes - exact WSL filter driers will be available. CHARACTERISTICS: Compacted bead, spring loaded design. Exceptional acid and particulate removal. Very low pressure drop. Filtration down to 10 microns. Designed for permanent installation. Hard copper sweat connectors. Large wrench flats on flare connectors. Standard lay-in lengths. Shock resistant design. Powder coat finish is 1000 hours salt spray test rated. Access port on the inlet side. 2 psig (21 bar) safe working pressure. APPLICATIONS: Designed for installation in the suction line of any refrigeration or air conditioning application to provide system protection or cleanup from moisture, contaminants, dirt and acid. Recommended for retrofit applications to trap dirt and particles released by the solvent action of the new lubricants. COMPATIBILITY: CFC, HCFC and HFC refrigerants. Mineral oils, alkylbenzene (AB), polyol ester (POE), and polyalkylene glycol (PAG) lubricants.
Suction Line Filter Driers Virginia KMP WSL DIMENSIONS: Dimensions: Inches (Millimeters) Cu. Fitting In. Type Overall Length Diameter Lay-in Length "A" "B" "C" WSL-3 6-3/4 (171) 2- (63) WSL-3S 6-1/ (154) 2- (63) 5-7/ (138) WSL-4 6-15/ (176) 2- (63) WSL-4S 6-1/ (154) 2- (63) 5-7/ (138) WSL-5 7-1/4 (184) 2- (63) WSL-5S 6-5/ (0) 2- (63) 5-5/ (135) WSL-6S 3/4 6-9/ (7) 2- (63) 5-5/ (135) WSL-7S 7/8 7-1/ (179) 2- (63) 5-9/ (1) WSL-5S 7-15/ (202) 3 (76) 6-15/ (176) WSL-6S 3/4 7-15/ (202) 3 (76) 6-11/ (170) WSL-7S 7/8 8-7/ (214) 3 (76) 6-15/ (176) WSL-9S 1-1/8 10- (270) 3- (89) 8-13/ (224) WSL-11S 1-14-3/ (360) 3- (89) 12-1/4 (311) WSL-13S 1-14-7/ (367) 3- (89) 12-1/4 (311) FLOW CAPACITY: Tons (kw) Refrigerant 12 Refrigerant 22 +40 F +20 F 0 F -20 F +40 F +20 F 0 F -20 F 2 P 1.5 P 1 P 0.5 P 3 P 2 P 1.5 P 1 P WSL-3 0.4 (1.5) 0.3 (1.0) 0.2 (0.6) 0.1 (0.3) 0.8 (2.7) 0.5 (1.8) 0.3 (1.2) 0.2 (0.8) WSL-3S 0.5 (1.8) 0.3 (1.2) 0.2 (0.8) 0.1 (0.4) 0.9 (3.2) 0.6 (2.1) 0.4 (1.4) 0.3 (0.9) WSL-4 0.9 (3.2) 0.6 (2.2) 0.4 (1.4) 0.2 (0.7) 1.7 (5.8) 1.1 (3.8) 0.7 (2.6) 0.5 (1.6) WSL-4S 1.0 (3.6) 0.7 (2.4) 0.4 (1.5) 0.2 (0.8) 1.8 (6.4) 1.2 (4.2) 0.8 (2.8) 0.5 (1.8) WSL-5 1.4 (5.1) 1.0 (3.5) 0.6 (2.2) 0.3 (1.2) 2.6 (9.1) 1.7 (6.0) 1.2 (4.1) 0.7 (2.6) WSL-5S 1.5 (5.2) 1.0 (3.5) 0.6 (2.2) 0.3 (1.2) 2.7 (9.3) 1.7 (6.1) 1.2 (4.1) 0.7 (2.6) WSL-6S 1.8 (6.4) 1.3 (4.4) 0.8 (2.8) 0.4 (1.5) 3.3 (6) 2.2 (7.6) 1.5 (5.1) 0.9 (3.2) WSL-7S 1.9 (6.8) 1.3 (4.7) 0.8 (3.0) 0.5 (1.6) 3.5 (3) 2.3 (8.0) 1.6 (5.5) 1.0 (3.4) WSL-5S 2.5 (8.8) 1.7 (6.0) 1.1 (3.8) 0.6 (2.0) 4.5 (8) 2.9 (3) 2.0 (7.0) 1.3 (4.4) WSL-6S 3.1 (7) 2.1 (7.3) 1.3 (4.6) 0.7 (2.5) 5.5 (19.3) 3.6 (6) 2.4 (8.6) 1.5 (5.4) WSL-7S 4.7 (.6) 3.2 (3) 2.0 (7.2) 1.1 (3.8) 8.5 (29.9) 5.5 (19.5) 3.8 (13.3) 2.4 (8.3) WSL-9S 6.1 (21.5) 4.2 (7) 2.6 (9.3) 1.4 (5.0) 0 (38.7) 7.2 (25.2) 4.9 (17.2) 3.1 (8) WSL-4511S 8.9 (31.3) 6.1 (21.3) 3.8 (13.5) 2.1 (7.2).0 (56.3) 4 (36.7) 7.1 (25.0) 4.5 (7) WSL-13S 1 (39.1) 7.6 (26.7) 4.8 (.9) 2.6 (9.1) 20.0 (70.3) 13.0 (45.8) 8.9 (31.2) 5.6 (19.6)
Suction Line Filter Driers Virginia KMP WSL FLOW CAPACITY: Tons (kw) Refrigerant 502 Refrigerant 134a +20 F 0 F -20 F -40 F +40 F +20 F 0 F -20 F 3 P 2 P 1.5 P 1 P 2 P 1.5 P 1 P 0.5 P WSL-3 0.5 (1.7) 0.3 (1.1) 0.2 (0.7) 0.1 (2.6) 0.5 (1.8) 0.3 (1.1) 0.2 (0.7) 0.1 (0.4) WSL-3S 0.6 (2.0) 0.4 (1.3) 0.2 (0.8) 0.1 (3.0) 0.6 (2.1) 0.4 (1.4) 0.2 (0.7) 0.1 (0.4) WSL-4 1.1 (3.7) 0.7 (2.4) 0.4 (1.6) 0.3 (5.5) 1.0 (3.5) 0.7 (2.5) 0.4 (1.4) 0.2 (0.7) WSL-4S 1.2 (4.1) 0.7 (2.6) 0.5 (1.7) 0.3 (6.0) 1.2 (4.2) 0.8 (2.8) 0.5 (1.8) 0.2 (0.7) WSL-5 1.7 (5.9) 1.1 (3.7) 0.7 (2.5) 0.4 (8.6) 1.7 (6.0) 1.1 (3.9) 0.7 (2.5) 0.4 (1.4) WSL-5S 1.7 (6.0) 1.1 (3.8) 0.7 (2.5) 0.4 (8.8) 1.7 (6.0) 1.1 (3.9) 0.7 (2.5) 0.4 (1.4) WSL-6S 2.1 (7.5) 1.3 (4.7) 0.9 (3.1) 0.5 (0) 2.1 (7.4) 1.4 (4.9) 0.9 (3.2) 0.5 (1.8) WSL-7S 2.3 (7.9) 1.4 (5.0) 0.9 (3.3) 0.6 (6) 2.2 (7.7) 1.5 (5.3) 0.9 (3.2) 0.5 (1.8) WSL-5S 2.9 (2) 1.8 (6.5) 1.2 (4.2) 0.7 (9) 2.9 (2) 1.9 (6.7) 1.2 (4.2) 0.6 (2.1) WSL-6S 3.5 (5) 2.2 (7.9) 1.5 (5.2) 0.9 (18.3) 3.5 (3) 2.3 (8.1) 1.4 (4.9) 0.8 (2.8) WSL-7S 5.5 (19.3) 3.5 (2) 2.3 (8.0) 1.4 (28.2) 5.4 (19.0) 3.6 (7) 2.2 (7.7) 1.2 (4.2) WSL-9S 7.1 (24.9) 4.5 (8) 3.0 (4) 1.8 (36.5) 7.0 (24.6) 4.7 (.5) 2.9 (2) 1.5 (5.3) WSL-4511S 3 (36.2) 6.5 (22.9) 4.3 (1) 2.6 (53.1) 2 (35.9) 6.8 (23.9) 4.2 (8) 2.2 (7.7) WSL-13S 9 (45.3) 8.2 (28.7) 5.4 (18.9) 3.3 (66.4) 7 (44.7) 8.5 (29.9) 5.2 (18.3) 2.7 (9.5) Refrigerant 407C Refrigerant 404A / 507 +20 F 0 F -20 F -40 F +20 F 0 F -20 F -40 F 3 P 2 P 1.5 P 1 P 3 P 2 P 1.5 P 1 P WSL-3 0.7 (2.6) 0.5 (1.6) 0.3 (1.1) 0.2 (0.7) 0.5 (1.8) 0.3 (1.1) 0.2 (0.7) 0.1 (0.4) WSL-3S 0.9 (3.0) 0.5 (1.9) 0.4 (1.3) 0.2 (0.8) 0.6 (2.2) 0.4 (1.3) 0.2 (0.9) 0.1 (0.5) WSL-4 1.6 (5.5) 1.0 (3.5) 0.7 (2.3) 0.4 (1.4) 1.1 (4.0) 0.7 (2.4) 0.5 (1.6) 0.3 (1.0) WSL-4S 1.7 (6.1) 1.1 (3.9) 0.7 (2.6) 0.4 (1.6) 1.2 (4.4) 0.8 (2.7) 0.5 (1.8) 0.3 (1.1) WSL-5 2.5 (8.7) 1.6 (5.5) 1.0 (3.7) 0.6 (2.2) 1.8 (6.2) 1.1 (3.8) 0.7 (2.5) 0.4 (1.5) WSL-5S 2.5 (8.8) 1.6 (5.6) 1.1 (3.7) 0.6 (2.3) 1.8 (6.4) 1.1 (3.9) 0.7 (2.6) 0.4 (1.5) WSL-6S 3.1 (0) 2.0 (7.0) 1.3 (4.6) 0.8 (2.8) 2.3 (7.9) 1.4 (4.8) 0.9 (3.2) 0.5 (1.9) WSL-7S 3.3 (7) 2.1 (7.4) 1.4 (4.9) 0.9 (3.0) 2.4 (8.4) 1.5 (5.1) 1.0 (3.4) 0.6 (2.0) WSL-5S 4.3 (0) 2.7 (9.5) 1.8 (6.3) 1.1 (3.9) 3.1 (8) 1.9 (6.6) 1.2 (4.4) 0.7 (2.6) WSL-6S 5.2 (18.4) 3.3 (7) 2.2 (7.7) 1.3 (4.7) 3.8 (13.2) 2.3 (8.1) 1.5 (5.3) 0.9 (3.2) WSL-7S 8.1 (28.4) 5.1 (18.0) 3.4 (9) 2.1 (7.3) 5.8 (20.4) 3.5 (5) 2.3 (8.3) 1.4 (4.9) WSL-9S 4 (36.7) 6.6 (23.3) 4.4 (5) 2.7 (9.4) 7.5 (26.4) 4.6 (.2) 3.0 (7) 1.8 (6.4) WSL-4511S 2 (53.4) 9.6 (33.9) 6.4 (22.5) 3.9 (13.7) 9 (38.4) 6.7 (23.5) 4.4 (5) 2.6 (9.3) WSL-13S 19.0 (66.8) 1 (42.4) 8.0 (28.1) 4.9 (17.2) 13.7 (48.0) 8.3 (29.4) 5.5 (19.4) 3.3 (6)
Suction Line Filter Driers Virginia KMP WSL Other Suction Line Products WSD Suction Line Filter Drier - For suction line applications in which it is difficult or impossible to use a standard length filter drier, the WSD series is the answer. All WSD filter driers have a 4" diameter and none exceeds a lay-in length over 5- inches. WSF Suction Line Filter - For those suction line applications in which filtration of particulates is the only concern, the WSF series is the solution. This filter is designed to offer a lower pressure drop than a comparable filter drier, while still filtering out the dangerous particles that can damage a system. WLD Premium Liquid Line Filter Drier - For liquid line applications requiring exceptional moisture removal capability, as well as the ability to remove acids from the refrigerant. This premium filter drier contains a special blend of desiccants as well as an extended filtering surface for removing larger-than-normal amounts of particulate matter from the refrigerant/lubricant combination. Compatible with all CFC, HCFC and HFC refrigerant/lubricant combinations. WAH Standard Liquid Line Filter Drier - For liquid line applications that require good filtration and moisture adsorption from a filter drier that is compatible with all CFC, HCFC and HFC refrigerant/lubricant combinations. Ideal for use in new and replacement equipment which has not had a compressor burnout. WSC Solid Core Liquid Line Filter Drier - For those technicians who like the quality of Virginia KMP filter driers, but who prefer a solid core. Adsorbs moisture and acids from the refrigerant as well as removing small suspended particles. Compatible with all CFC, HCFC, and HFC refrigerant/lubricant combinations. V2A Two Way Liquid Line Filter Drier - For use in the bidirectional liquid line of heat pump applications. Contains a special blend of desiccants to remove both moisture and acid from a system, as well as filtering very small particles from the refrigerant/lubricant mixture. Offers exceptional flow and drying capabilities. WSG Liquid Line Filter Drier with Built-In Sight Glass - For liquid line applications which require the use of a standard liquid line filter drier and a sight glass. The built in sight glass saves time and money in installation and reduces the possibility for leaks while the liquid line filter drier removes moisture and contaminants from the refrigerant/lubricant combination. Compatible with all CFC, HCFC and HFC refrigerant/lubricant combinations. NON-WARRANTY - All data, statements and recommendations contained herein are based upon the best information available and are believed to be reliable. However, no warranty, either expressed or implied, is made concerning the application of this product since the customer s use cannot be controlled. Statements concerning the use of this product should not be construed as suggestions, recommendations or inducements that it be used in violation of patent rights or in violation of any applicable laws or regulations. Product improvement is a continuous process at Virginia KMP Corp., therefore, product specifications may change without notice. Please contact your VKMP representative or distributor to verify details. Hong Kong Tel: +852 8108 2998 Fax: +852 8106 3196 France Tel: +33 437 420008 Fax: +33 478 495653 Germany Tel: +49 22 9 907 Fax: +49 22 9 910 Italy Tel: +39 02 45 708 663 Fax: +39 02 45 708 600 Virginia KMP Corp. 00 Platinum Way Dallas, Texas 237 USA Tel: 800 285 8567 Fax: 800 877 8567 E-Mail: info@virginiakmp.com Website: www.virginiakmp.com England Tel: +44 1226 273 400 Fax: +44 1226 273 401 Copyright 2001 Virginia KMP Corp. WSL - Version 5-8/6/01