ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA 590 General partner Elektrobau Mulfingen GmbH Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRB 590 Nominal data Type Motor WE00-DS7-0 ME068-CF Phase ~ ~ Nominal voltage VAC Frequency Hz Method of obtaining data ml ml Valid for approval/standard CE CE Speed (rpm) min - 0 0 Power consumption W 7 90 Current draw A 0. 0. Capacitor µf Capacitor voltage VDB 00 00 Capacitor standard S0 (CE) S0 (CE) Max. back pressure Pa Max. back pressure in. wg 0. 0. Min. ambient temperature C -5-5 Max. ambient temperature C Starting current A 0.6 0.57 ml = Max. load me = Max. efficiency fa = Free air cs = Customer specification ce = Customer equipment Subject to change Item no. 66-5-9980 ENU Change 9090 Approved 07-0-05 Page / 5
Technical description Weight Fan size Rotor surface Blade material Fan housing material Guard grille material Number of blades 5 Airflow direction Direction of rotation.9 kg 00 mm Painted black PP plastic Sheet steel, pre-galvanized and coated with black plastic Steel, phosphated and coated with black plastic "A" Clockwise, viewed toward rotor Degree of protection IP; installation- and position-dependent as per EN 0-5 Insulation class Moisture (F) / Environmental (H) protection class Max. permitted ambient temp. for motor (transport/storage) Min. permitted ambient temp. for motor (transport/storage) Installation position Condensation drainage holes Mode Motor bearing Touch current according to IEC 990 (measuring circuit Fig., TN system) Motor protection With cable Protection class Conformity with standards "B" H0+ + 80 C - 0 C Shaft horizontal or rotor on bottom; rotor on top on request On rotor side S Ball bearing < 0.75 ma Thermal overload protector (TOP) internally connected Variable I (with customer connection of protective earth) EN 5-; CE Item no. 66-5-9980 ENU Change 9090 Approved 07-0-05 Page / 5
Product drawing Direction of air flow "A" Cable PVC G 0.5 mm², x crimped splices Connection diagram U blue Z brown U black PE green/yellow Item no. 66-5-9980 ENU Change 9090 Approved 07-0-05 Page / 5
Curves: Air performance Hz Pfs Pa 70 0 0 0 0 0.05 0. 0.5 0. 0.5 in wg 0 00 00 0 800 000 qv 00 800 00 0 m³/h ρ =.5 kg/m³ ± % Measurement: LU-8- Air performance measured according to ISO 580 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 7 / sound pressure level measured at m distance from fan axis. The values given are valid under the specified measuring conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be checked on the installed unit. Measured values U f n P e I LpA in LwA in V Hz min - W A m /h Pa in. wg 85 0.8 5 800 0 0 0.00 65 6 0.8 5 59 0 90 0.08 66 0.9 5 58 80 0 7 0.6 0 7 0. 5 6 895 0. U = Power supply f = Frequency n = Speed (rpm) P e = Power consumption I = Current draw LpA in = Sound pressure level intake side LwA in = Sound power level intake side = Air flow = Pressure increase Item no. 66-5-9980 ENU Change 9090 Approved 07-0-05 Page / 5
Curves: Air performance Hz Pfs Pa 0 0 0.05 0. 0.5 0. 0.5 in wg 0 00 00 0 800 000 00 qv 00 800 00 0 000 m³/h ρ =.5 kg/m³ ± % Measurement: LU-87- Air performance measured according to ISO 580 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 7 / sound pressure level measured at m distance from fan axis. The values given are valid under the specified measuring conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be checked on the installed unit. Measured values U V f Hz n min - 595 5 0 P e W 78 8 86 90 I A 0. 0.6 0.7 0.0 LpA in 56 LwA in 6 6 6 6 m /h 070 80 575 80 Pa 0 0 0 0 065 95 7 in. wg 0.00 0.08 0.6 0. U = Power supply f = Frequency n = Speed (rpm) P e = Power consumption I = Current draw LpA in = Sound pressure level intake side LwA in = Sound power level intake side = Air flow = Pressure increase Item no. 66-5-9980 ENU Change 9090 Approved 07-0-05 Page 5 / 5