Ultrafast Rectifier, 8 FRED Pt 2L TO-220C Base cathode 2 2L TO-220 FULL-PK FETURES State of the art low forward voltage drop Ultrafast recovery time 75 C operating junction temperature Low leakage current Fully isolated package (V INS = 2500 V RMS ) True 2 pin package Designed and qualified according to JEDEC -JESD 47 Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 Cathode 3 node VS-ETL0806-M3 PRODUCT SUMMRY Cathode 2 node VS-ETL0806FP-M3 Package 2L TO-220C, 2L TO-220FP I F(V) 8 V R 600 V V F at I F 0.84 V t rr (typ.) 65 ns T J max. 75 C Diode variation Single die DESCRIPTION State of the art, ultralow V F, soft-switching ultrafast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimized conduction loss, optimized stored charge and low recovery current minimized the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. PPLICTIONS C-DC SMPS 70 W to 400 W e.g. laptop and printer C adaptors, desktop PC, TV and monitor, games units and DVD C/DC power supplies. BSOLUTE MXIMUM RTINGS PRMETER SYMBOL TEST CONDITIONS VLUES UNITS Peak repetitive reverse voltage V RRM 600 V T C = 55 C verage rectified forward current in DC I F(V) 8 FULL-PK T C = 34 C Non-repetitive peak surge current I FSM T J = 25 C 20 Operating junction and storage temperatures T J, T Stg -65 to +75 C ELECTRICL SPECIFICTIONS (T J = 25 C unless otherwise specified) PRMETER SYMBOL TEST CONDITIONS MIN. TYP. MX. UNITS Breakdown voltage, blocking voltage V BR, V R I R = 00 μ 600 - - I F = 8-0.97.07 Forward voltage V F I F = 8, T J = 50 C - 0.84 0.90 V R = V R rated - 0.0 9 Reverse leakage current I R T J = 50 C, V R = V R rated - 5 50 μ Junction capacitance C T V R = 600 V - 6 - pf Series inductance L S Measured lead to lead 5 mm from package body - 8 - nh V Revision: 08-Jul-5 Document Number: 93528
DYNMIC RECOVERY CHRCTERISTICS (T J = 25 C unless otherwise specified) PRMETER SYMBOL TEST CONDITIONS MIN. TYP. MX. UNITS I F =, di F /dt = 00 /μs, V R = 30 V - 65 00 Reverse recovery time t rr I F = 8, di F /dt = 00 /μs, V R = 30 V - 50 250 T J = 25 C - 80 - ns T J = 25 C - 240 - Peak recovery current I RRM T I F = 8 J = 25 C - 5 - di F /dt = 200 /μs T J = 25 C V R = 390 V - 9 - T J = 25 C - 500 - Reverse recovery charge Q rr T J = 25 C - 2400 - nc THERML - MECHNICL SPECIFICTIONS PRMETER SYMBOL TEST CONDITIONS MIN. TYP. MX. UNITS Maximum junction and storage temperature range T J, T Stg -65-75 C Thermal resistance, - 2.0 2.6 R thjc junction to case FULL-PK - 4.6 5.5 Thermal resistance, junction to ambient R thj Typical socket mount - - 70 C/W Typical thermal resistance, case to heatsink R thcs Mounting surface, flat, smooth and greased - 0.5 - Weight Mounting torque Marking device Case style 2L TO-220C Case style 2L TO-220 FULL-PK - 2 - g - 0.07 - oz. 6 (5) - 2 (0) ETL0806 ETL0806FP kgf cm (lbf in) Revision: 08-Jul-5 2 Document Number: 93528
Instantaneous Forward Current - I F () 00 0 Tj = 75 C Tj = 25 C Tj = 50 C 0. 0.4 0.6 0.8.0.2.4.6 Forward Voltage Drop - V F (V) Fig. - Typical Forward Voltage Drop Characteristics Reverse Current - I R (µ) Junction Capacitance - C T (pf) 00 0 0. 0.0 0.00 75 C 50 C 25 C 00 C 75 C 50 C 25 C 0.000 0 00 200 300 400 500 600 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 00 0 0 00 200 300 400 500 600 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 0 Thermal Impedance ZthJC ( C/W) 0. D = 0.5 D = 0.2 D = 0. D = 0.05 D = 0.02 D = 0.0 Single Pulse (Thermal Resistance) 0.0 E-05 E-04 E-03 E-02 E-0 E+00 t, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance Z thjc Characteristics Revision: 08-Jul-5 3 Document Number: 93528
0 Thermal Impedance ZthJC ( C/W) D = 0.5 D = 0.2 D = 0. D = 0.05 D = 0.02 D = 0.0 Single Pulse (Thermal Resistance) 0. E-05 E-04 E-03 E-02 E-0 E+00 E+0 E+02 t, Rectangular Pulse Duration (Seconds) Fig. 5 - Maximum Thermal Impedance Z thjc Characteristics (FULL-PK) 80 80 llowable Case Temperature ( C) 70 60 50 DC llowable Case Temperature ( C) 60 40 20 00 DC 40 0 2 4 6 8 0 verage Forward Current - IF (V) () Fig. 6 - Maximum llowable Case Temperature vs. verage Forward Current 80 0 2 4 6 8 0 verage Forward Current - IF (V) () Fig. 7 - Maximum llowable Case Temperature vs. verage Forward Current (FULL-PK) 2 verage Power Loss ( Watts ) 0 8 6 4 2 RMS Limit D = 0.0 D = 0.02 D = 0.05 D = 0. D = 0.2 D = 0.5 DC 0 0 2 4 6 8 0 2 verage Forward Current - IF (V) () Fig. 8 - Forward Power Loss Characteristics Revision: 08-Jul-5 4 Document Number: 93528
360 3500 320 3000 If = 8, 25 C 280 2500 trr ( ns ) 240 200 If = 8, 25 C Qrr ( nc ) 2000 500 If = 8, 25 C 60 If = 8, 25 C 000 20 500 typical value 80 00 000 di F /dt (/µs ) Fig. 9 - Typical Reverse Recovery vs. di F /dt typical value 0 00 000 di F /dt (/µs ) Fig. 0 - Typical Stored Charge vs. di F /dt V R = 200 V L = 70 μh 0.0 Ω di F /dt adjust G D IRFP250 D.U.T. S Fig. - Reverse Recovery Parameter Test Circuit (3) t rr 0 I F t a tb (2) I RRM (4) Q rr 0.5 I RRM di (rec)m /dt (5) 0.75 I RRM () di F /dt () di F /dt - rate of change of current through zero crossing (4) Q rr - area under curve defined by t rr and I RRM (2) I RRM - peak reverse recovery current (3) t rr - reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 I RRM and 0.50 I RRM extrapolated to zero current. Q rr = t rr x I RRM 2 (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr Fig. 2 - Reverse Recovery Waveform and Definitions Revision: 08-Jul-5 5 Document Number: 93528
ORDERING INFORMTION TBLE Device code VS- E T L 08 06 FP -M3 2 3 4 5 6 7 8 - product 2 - Circuit configuration: E = single diode 3 - T = TO-220 4 - L = hyperfast recovery time 5 - Current code: 08 = 8 6 - Voltage code: 06 = 600 V 7 - None = TO-220 FP = FULL-PK 8 - Environmental digit: -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMTION (Example) PREFERRED P/N QUNTITY PER TUBE MINIMUM ORDER QUNTITY PCKGING DESCRIPTION VS-ETL0806-M3 50 000 ntistatic plastic tube VS-ETL0806FP-M3 50 000 ntistatic plastic tube Dimensions Part marking information LINKS TO RELTED DOCUMENTS 2L TO-220C 2L TO-220 FULL-PK 2L TO-220C 2L TO-220 FULL-PK www.vishay.com/doc?95259 www.vishay.com/doc?95260 www.vishay.com/doc?9539 www.vishay.com/doc?95392 Revision: 08-Jul-5 6 Document Number: 93528
Outline Dimensions True 2 Pin TO-220 DIMENSIONS in millimeters and inches 0.002" 0.05 mm Ø P E B F Q H D 0.50" REF. Term. 4 Ø 2.0 mm REF. 45 L b L b c 60 2 e J SYMBOL MILLIMETERS INCHES MIN. MX. MIN. MX. 4.32 4.57 0.70 0.80 b 0.7 0.9 0.028 0.036 b.5.39 0.045 0.055 c 0.36 0.53 0.04 0.02 D 4.99 5.49 0.590 0.60 E 0.04 0.4 0.395 0.40 e 5.08 BSC 0.200 BSC F.22.37 0.048 0.054 H 5.97 6.47 0.235 0.255 J 2.54 2.79 0.00 0.0 L 3.47 3.97 0.530 0.550 L () 3.3 3.8 0.30 0.50 Ø P 3.79 3.88 0.49 0.53 Q 2.60 2.84 0.02 0.2 Notes () Lead dimension and finish uncontrolled in L These dimensions are within allowable dimensions of JEDEC TO-220B rev. J outline dated 3-24-87 Controling dimension: Inch Revision: 05-Dec-2 Document Number: 95259
Outline Dimensions DIMENSIONS in millimeters and inches True 2 Pin TO-220 FULL-PK Ø Q F E Q H D Q 2 θ L b L b e C J SYMBOL MILLIMETERS INCHES MIN. MX. MIN. MX. 4.53 4.93 0.78 0.94 b 0.7 0.9 0.028 0.036 b.5.39 0.045 0.055 C 0.36 0.53 0.04 0.02 D 5.67 6.07 0.67 0.633 E 9.96 0.36 0.392 0.408 e 5.08 typical 0.200 typical F 2.34 2.74 0.092 0.07 H 6.50 6.90 0.256 0.272 J 2.56 2.96 0.0 0.7 L 2.78 3.8 0.503 0.59 L 2.23 2.63 0.088 0.04 Ø Q 2.98 3.38 0.7 0.33 Q 3.0 3.50 0.22 0.38 Q 2 4.80 5.20 0.583 0.598 0 5 0 5 Revision: 05-Dec-2 Document Number: 95260
Legal Disclaimer Notice Vishay Disclaimer LL PRODUCT, PRODUCT SPECIFICTIONS ND DT RE SUBJECT TO CHNGE WITHOUT NOTICE TO IMPROVE RELIBILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHY INTERTECHNOLOGY, INC. LL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000