PNEUMTIC SERVO CTUTOR BORE () COMMUNICTION CRD STROKE () ROD END VLVE ENVIRONMENTL PROTECTION OPTIONS MOUNTING PS 325 - XX - XXXX - X - X - X - X - X 3.25 = 325 4.00 = 04 6.00 = 06 8.00 = 08 0.00 = 0 2.00 = 2 8.00 = 8 STNDRD FLOW/3 POSITION = 0 LOW FLOW/3 POSITION = 2 RS232 SERIL = 0 I/O = T CN2.0B = C DeviceNet = D PROFIBUS = P ETHERNET = E SERCOS = S 5/8-8 X.00 MLE = 0M 5/8-8 X.25 MLE = 0ML 5/8-8 X 0.75 FEMLE = 0F 3/4-6 X.25 MLE W/ HEX = 2MH M6X.5-6g X.250" MLE W/ HEX = M6MH NONE = 0 BRONZE ROD BUSHING (NO ROD SEL OR ROD WIPER) = Z ROD BRKE = B VITON SELS = V SS TIE RODS = S IP67 (design) = Base cylder (no mount) = 0 Left (side) Mount = LM Bottom Mount = BM Right (side) Mount = RM Front Trunnion (horizontal wrt valve) = FT Rear Trunnion (horizontal wrt valve) = RT Front Trunnion Vertial (wrt valve) CONSULT FCTORY = FTV Rear Trunnion Vertial (wrt valve) CONSULT FCTORY = RTV Detachable Head Clevis = DHC Detachable Head Eye = DHE CONSULT FCTORY = OTHER MOUNTING OPTIONS SOLD S CCESSORIES Rectangular Flange Front cap = 325RFF Rectangular Flange Back cap = 325RFB Right ngle foot Mount = 325RM tie rod Extensions Front cap = 325EF tie rod Extensions Back cap = 325EB tie rod Extensions Front and Back cap = 325EFB SPECIFICTION NOTES: DRWING PER SME Y4.5N-994 DO NOT SCLE DRWING: TOLERNCES ON DIMENSIONS 2 PLCES (0.00) +/-0.00 3 PLCES (0.000) +/-0.005 THIRD NGLE PROJECTION NGLE +/-2 DEGREES Property of SUNSTREM INCORPORTED DRWN BY: PPROVED BY: SCLE: N/ 02/22/2 02/22/2 DRWING NUMBER: OF 6 3.25" BORE PS PS325-XX-XXXX-0-0-0-0-0
Table (unit ). STROKE L L2 L3 L4 P/N = STK = STK + 0.832 = STK + 7.24 = STK/2 + 3.62 = STK/2 + 0.076 PS325-04-XXXX-0-0-0-0-0 4.00 4.832.24 5.62 2.076 PS325-06-XXXX-0-0-0-0-0 6.00 6.832 3.24 6.62 3.076 PS325-08-XXXX-0-0-0-0-0 8.00 8.832 5.24 7.62 4.076 PS325-0-XXXX-0-0-0-0-0 0.00 20.832 7.24 8.62 5.076 PS325-2-XXXX-0-0-0-0-0 2.00 22.832 9.24 9.62 6.076 PS325-8-XXXX-0-0-0-0-0 8.00 28.832 25.24 2.62 9.076 3.269 3.09 TO TOP OF M6 CIRCULR CONNECTOR 0.700 0.700 L4 0.020 6.952 3/8-24 UNF - 2B x0.45 MIN 4.500 SQ 3.504 SQ WIDTH CROSS FLTS RODn.000 0.240 3/8-24 UNF - 2B x0.45 MIN L3 L2 L 3.592 3.504 SQ 4.500 SQ Property of SUNSTREM INCORPORTED 2.65 n 2.63 7/8 CROSS FLTS DETIL SCLE / 3 SEE PGE 4 FOR ROD END OPTIONS SPECIFICTION NOTES: DRWING PER SME Y4.5N-994 DO NOT SCLE DRWING: TOLERNCES ON DIMENSIONS 2 PLCES (0.00) +/-0.00 3 PLCES (0.000) +/-0.005 THIRD NGLE PROJECTION NGLE +/-2 DEGREES DRWN BY: PPROVED BY: SCLE: :4 3.25" BORE PS DRWING NUMBER: 2 OF 6 PS325-XX-XXXX-0-0-0-0-0
VLVE MOUNTING SCREWS: SS 0-32 x 2" HEX (5/32") SOCKET HED CP SCREW EXHUST PORTS FOR MUFFLERS/SILENCERS 3/8-8 NPT E3: ELECTRICL CONNECTION FOR: 2 BIT PRLLEL I/O (4-PIN M6 CIRCULR CONNECTOR) OR CN2.0B (6-PIN M6 CIRCULR CONNECTOR) INLET PRESSURE PORT 3/8-8 NPT MNULLY OPERTED VENTS PHILLIPS E2: ELECTRICL CONNECTION FOR: RS232 (6-PIN M6 CIRCULR CONNECTOR) E: ELECTRICL CONNECTION TO POWER SUPPLY (4-PIN M6 CIRCULR CONNECTOR) Property of SUNSTREM INCORPORTED DRWN BY: PPROVED BY: SPECIFICTION NOTES: SCLE: THIRD NGLE PROJECTION :3 DRWING PER SME Y4.5N-994 DO NOT SCLE DRWING: TOLERNCES ON DIMENSIONS 2 PLCES (0.00) +/-0.00 3 PLCES (0.000) +/-0.005 NGLE +/-2 DEGREES 3 OF 6 3.25" BORE PS DRWING NUMBER: PS325-XX-XXXX-0-0-0-0-0
ROD END WIDTH CROSS FLTS WIDTH CROSS FLTS PS 325 - XX - XXXX - X - X - X - X - X 0F.000 0M 0M = 5/8-8 X.00 MLE 0ML = 5/8-8 X.25 MLE SCLE 0F = 5/8-8 X 0.75 FEMLE 2MH = 3/4-6 X.25 MLE W/ HEX M6M = M6X.5-6g X.250" MLE W/ HEX SCLE / 2 5/8-8 UNF-2Bx0.75 MIN /2 5/8-8 UNF - 2 7/8 CROSS FLTS 7/8 CROSS FLTS.375.250 M6M WIDTH CROSS FLTS.25 SCLE / 2 2MH SCLE / 2 0ML SCLE / 2 M6x.5-6g.375 22 mm HEX 5/8-8 UNF - 2 7/8 CROSS FLTS.25 Property of SUNSTREM INCORPORTED DRWN BY: PPROVED BY: 3/4-6 UNF - 2 SPECIFICTION NOTES: SCLE: THIRD NGLE PROJECTION :2 7/8 HEX DRWING PER SME Y4.5N-994 DO NOT SCLE DRWING: TOLERNCES ON DIMENSIONS 2 PLCES (0.00) +/-0.00 3 PLCES (0.000) +/-0.005 NGLE +/-2 DEGREES 4 OF 6 3.25" BORE PS DRWING NUMBER: PS325-XX-XXXX-0-0-0-0-0
Table (unit ). PS325-XX-XXXX-0-0-0-0-LM (LEFT MOUNT) P/N PS325-04-XXXX-0-0-0-0-LM/BM/RB PS325-06-XXXX-0-0-0-0-LM/BM/RM PS325-08-XXXX-0-0-0-0-LM/BM/RM PS325-0-XXXX-0-0-0-0-LM/BM/RM PS325-2-XXXX-0-0-0-0-LM/BM/RM PS325-8-XXXX-0-0-0-0-LM/BM/RM 2.000 STROKE =STK 4.00 6.00 8.00 0.00 2.00 8.00 = STK + 5.99 9.99.99 3.99 5.99 7.99 23.99 /2-3 UNC - 2B x.000 w n0.520 X 90~ LEFT PS325-XX-XXXX-0-0-0-0-BM (BOTTOM MOUNT) 2.000 BOTTOM TOP RIGHT /2-3 UNC - 2B x.000 w n0.520 X 90 2.000 PS325-XX-XXXX-0-0-0-0-RM (RIGHT MOUNT) Property of SUNSTREM INCORPORTED DRWN BY: PPROVED BY: SPECIFICTION NOTES: SCLE: DRWING PER SME Y4.5N-994 THIRD NGLE PROJECTION :4 /2-3 UNC - 2B x.000 w n0.520 X 90~ DO NOT SCLE DRWING: TOLERNCES ON DIMENSIONS 2 PLCES (0.00) +/-0.00 3 PLCES (0.000) +/-0.005 NGLE +/-2 DEGREES 5 OF 6 3.25" BORE PS DRWING NUMBER: PS325-XX-XXXX-0-0-0-0-LM/BM/RM
Table (unit ). P/N PS325-04-XXXX-0-0-0-0-XT PS325-06-XXXX-0-0-0-0-XT PS325-08-XXXX-0-0-0-0-XT PS325-0-XXXX-0-0-0-0-XT PS325-2-XXXX-0-0-0-0-XT PS325-8-XXXX-0-0-0-0-XT FRONT TRUNNION (FT) STROKE = STK 4.00 6.00 8.00 0.00 2.00 8.00 n L6 = STK + 6.65 0.65 2.65 4.65 6.65 8.65 2.65.000 0.999 RER TRUNNION (RT).460 L6 NOTES: CONSULT FCTORY FOR FTV (FRONT TRUNNION VERTICL) ND RTV (RER TRUNNION VERTICL) OPTIONS.460 Property of SUNSTREM INCORPORTED DRWN BY: PPROVED BY: SPECIFICTION NOTES: SCLE: THIRD NGLE PROJECTION :4 DRWING PER SME Y4.5N-994 DO NOT SCLE DRWING: TOLERNCES ON DIMENSIONS 2 PLCES (0.00) +/-0.00 3 PLCES (0.000) +/-0.005 NGLE +/-2 DEGREES 6 OF 6 3.25" BORE PS DRWING NUMBER: PS325-XX-XXXX-0-0-0-0-XT