SiC Silicon Carbide Diode 5 th Generation thinq! TM 65V SiC Schottky Diode Final Datasheet Rev. 2., 215-4-13 Power Management & Multimarket
5 th Generation thinq! SiC Schottky Diode 1 Description Features Revolutionary semiconductor material - Silicon Carbide Benchmark switching behavior No reverse recovery/ No forward recovery Temperature independent switching behavior High surge current capability Pb-free lead plating; RoHS compliant Qualified according to JEDEC 1) for target applications 2) 3) Breakdown voltage tested at 44 ma Optimized for high temperature operation Benefits System efficiency improvement over Si diodes System cost / size savings due to reduced cooling requirements Enabling higher frequency / increased power density solutions Higher system reliability due to lower operating temperatures Reduced EMI Applications ThinQ! Generation 5 represents Infineon leading edge technology for the SiC Schottky Barrier diodes. A combination with a new, more compact design and thinwafer technology results is a new family of products showing improved efficiency over all load conditions, resulting from both the improved thermal characteristics and a lower figure of merit (Qc x Vf). The new thinq! Generation 5 has been designed to complement our 65V CoolMOS families: this ensures meeting the most stringent application requirements in this voltage range. 1 Switch mode power supply Power factor correction Solar inverter Uninterruptible power supply Table 1 Key Performance Parameters 4) Parameter Value Unit V DC 65 V Q C ; V R =4V 2 x 29 nc E C ; V R =4V 2 x 6.6 µj I F @ T C < 12 C 2 x 2 A Table 2 Pin Definition Pin 1 Pin 2 Pin 3 A C A 2 3 Type / ordering Code Package Marking Related links PG-TO247-3 D465B5 www.infineon.com/sic 1) J-STD2 and JESD22 2) All devices tested under avalanche conditions for a time periode of 1ms 3) Per Leg 4) Per Device Final Datasheet 2 Rev. 2., 215-4-13
5 th Generation thinq! TM SiC Schottky Diode Table of contents Table of Contents 1 Description... 2 2 Maximum ratings... 4 3 Thermal characteristics... 4 4 Electrical characteristics... 5 5 Electrical characteristics diagrams... 6 6 Simplified Forward Characteristics Model... 8 7 Package outlines... 9 8 Revision History... 1 Final Datasheet 3 Rev. 2., 215-4-13
5 th Generation thinq! TM SiC Schottky Diode Maximum ratings 2 Maximum ratings Table 3 Maximum ratings Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. Continuous forward current 1) I F 2 T C < 12 C, D=1 Surge non-repetitive forward current, sine I F,SM 13 T C = 25 C, t p =1 ms halfwave 1) A 87 T C = 15 C, t p =1 ms Non-repetitive peak forward current 1) I F,max 776 T C = 25 C, t p =1 µs i²t value 1) i²dt 53 A²s T C = 25 C, t p =1 ms 38 T C = 15 C, t p =1 ms Repetitive peak reverse voltage V RRM 65 V T j = 25 C Diode dv/dt ruggedness dv/dt 1 V/ns V R =..48 V Power dissipation 1) P tot 112 W T C = 25 C Operating and storage temperature T j ;T stg -55 175 C Mounting torque 6 Ncm M3 screws 3 Thermal characteristics Table 4 Thermal characteristics TO-247-3 Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. Thermal resistance, junction-case 1) R thjc 1. 1.3 Thermal resistance, junction-ambient 1) R thja 62 K/W leaded Soldering temperature, wavesoldering only allowed at leads T sold 26 C 1.6mm (.63 in.) from case for 1 s 1) Per Leg 2) Per Device Final Datasheet 4 Rev. 2., 215-4-13
5 th Generation thinq! TM SiC Schottky Diode Electrical characteristics 4 Electrical characteristics Table 5 Static characteristics Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. DC blocking voltage V DC 65 T j =25 C Diode forward voltage V F 1.5 1.7 V I F = 2 A, T j =25 C 1.8 2.1 I F = 2 A, T j =15 C Reverse current 1) I R 1.1 21 V R =65 V, T j =25 C.3 75 µa V R =6 V, T j =25 C 4.1 145 V R =65 V, T j =15 C Table 6 AC characteristics Parameter Symbol Values Unit Note/Test Condition Total capacitive charge 1) Q c Min. Typ. Max. 29 nc Total Capacitance 1) C 59 V R =4 V, di/dt=2a/µs, I F I F,MAX, T j =15 C V R =1 V, f=1 MHz 76 pf V R =3 V, f=1 MHz 74 V R =6 V, f=1 MHz 1) Per Leg 2) Per Device Final Datasheet 5 Rev. 2., 215-4-13
I F [A] I F [A] P tot [W] I F [A] 5 th Generation thinq! TM SiC Schottky Diode Electrical characteristics diagrams 5 Electrical characteristics diagrams Table 7 Power dissipation 1) Maximal diode forward current 1) 12 1 8 16 14 12 1.1.3.5.7 1 6 4 2 8 6 4 2 25 5 75 1 125 15 175 T C [ C] 25 5 75 1 125 15 175 T C [ C] P tot =f(t C ); R thjc,max I F =f(t C ); R thjc,max ;T j 175 C; parameter D=duty cycle Table 8 Typical forward characteristics 1) Typical forward characteristics in surge current 1) 4 2 35 3 25 2-55 C 25 C 1 C 18 16 14 12 1-55 C 25 C 15 1 15 C 175 C 8 6 4 1 C 5 1 2 3 V F [V] 2 15 C 175 C 1 2 3 4 5 6 V F [V] I F =f(v F ); t p =2 µs; parameter: T j I F =f(v F ); t p =2 µs; parameter: T j 1) Per Leg 2) Per Device Final Datasheet 6 Rev. 2., 215-4-13
Z th,jc [K/W] C [pf] Q C [nc] I R [A] Table 9 5 th Generation thinq! TM SiC Schottky Diode Electrical characteristics diagrams Typ. capacitance charge vs. current slope 1) Typ. Reverse current vs. reverse voltage 1) 3 1.E-4 25 1.E-5 2 1.E-6 15 1.E-7 175 C 1 5 1.E-8 15 C 1 C 25 C -55 C 1 3 5 7 9 di F /dt [A/µs] 1.E-9 1 2 3 4 5 6 V R [V] Q C =f(di F /dt); T j =15 C; V R =4 V; I F I F,max I R =f(v R ); parameter: T j Table 1 Max. transient thermal impedance 1) Typ. capacitance vs. reverse voltage 1) 8 1 7 6.1.5.2.1.5.2.1 single pulse 5 4 3 2 1.1 1.E-6 1.E-3 1.E+ t p [s] Z th,jc =f(t P ); parameter: D=t P /T 1 1 1 1 V R [V] C=f(V R ); T j =25 C; f=1 MHz 1) Per Leg 2) Per Device Final Datasheet 7 Rev. 2., 215-4-13
I F [A] E C [µj] 5 th Generation thinq! TM SiC Schottky Diode Electrical characteristics diagrams Table 11 Typ. capacitance stored energy 1) 18 16 14 12 1 8 6 4 2 2 4 6 V R [V] E C =f(v R ) 6 Simplified Forward Characteristics Model Table 12 Equivalent forward current curve 1) Mathematical Equation V F V TH R DIFF I F V R TH T j.1 T j 1.4 V -7 2-5 T 6.4 1 T 6.4 1 T.23 DIFF j j j 1/R diff V th V F [V] V F =f(i F ) T j in C; -55 C < T j < 175 C; I F < 4 A 1) Per Leg 2) Per Device Final Datasheet 8 Rev. 2., 215-4-13
5 th Generation thinq! TM SiC Schottky Diode 7 Package outlines Figure 1 Outlines TO-247, dimensions in mm/inches 1) Per Leg 2) Per Device Final Datasheet 9 Rev. 2., 215-4-13
5 th Generation thinq! TM SiC Schottky Diode Revision History 8 Revision History 5 th Generation thinq! TM SiC Schottky Diode Revision History: 215-4-13, Rev. 2. Previous Revision: Revision Subjects (major changes since last version) 2. Release of the final datasheet. We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: erratum@infineon.com Edition 215-4-13 Published by Infineon Technologies AG 81726 Munich, Germany 215 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. The Infineon Technologies component described in this Data Sheet may be used in life-support devices or systems and/or automotive, aviation and aerospace applications or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support, automotive, aviation and aerospace device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Final Datasheet 1 Rev. 2., 215-4-13
w w w. i n f i n e o n. c o m Published by Infineon Technologies AG
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Infineon: IDW4G65C5FKSA1 XKSA1 IDW4G65C5 XKSA2 IDW4G65C5XKSA1