Chapter 3: Solutions and Thermodynamics of Multicomponent Systems

Similar documents
Thermodynamics of Materials

_J _J J J J J J J J _. 7 particles in the blue state; 3 particles in the red state: 720 configurations _J J J _J J J J J J J J _

Chapter 6 : Gibbs Free Energy

Chem 204A, Fall 2004, Mid-term (II)

Chapter 7. Systems 7.1 INTRODUCTION 7.2 MATHEMATICAL MODELING OF LIQUID LEVEL SYSTEMS. Steady State Flow. A. Bazoune

V. Electrostatics Lecture 27a: Diffuse charge at electrodes

Approach: (Equilibrium) TD analysis, i.e., conservation eqns., state equations Issues: how to deal with

Open Systems: Chemical Potential and Partial Molar Quantities Chemical Potential

Phys 344 Ch 5 Lect 4 Feb 28 th,

Problem Set 5 Solutions - McQuarrie Problems 3.20 MIT Dr. Anton Van Der Ven

A brief overview of the principles of thermobarometry Cin-Ty Lee (2009)

6. ELUTRIATION OF PARTICLES FROM FLUIDIZED BEDS

Introduction to Vapor/Liquid Equilibrium, part 2. Raoult s Law:

Feedback Principle :-

BME 5742 Biosystems Modeling and Control

Circuits Op-Amp. Interaction of Circuit Elements. Quick Check How does closing the switch affect V o and I o?

Physic 231 Lecture 33

Lecture 12. Heat Exchangers. Heat Exchangers Chee 318 1

SIMULATION OF THREE PHASE THREE LEG TRANSFORMER BEHAVIOR UNDER DIFFERENT VOLTAGE SAG TYPES

Wp/Lmin. Wn/Lmin 2.5V

A New Method for Solving Integer Linear. Programming Problems with Fuzzy Variables

Shell Stiffness for Diffe ent Modes

Introduction to Electronic circuits.

Appendix II Summary of Important Equations

Transient Conduction: Spatial Effects and the Role of Analytical Solutions

CHAPTER Read Chapter 17, sections 1,2,3. End of Chapter problems: 25

Chapter 3, Solution 1C.

(element) But, we do NOT know G!!! Correct, but not applicable! Free Energy Problems: o r. products. reactants. o f. reactants.

Water vapour balance in a building moisture exposure for timber structures

Section 3: Detailed Solutions of Word Problems Unit 1: Solving Word Problems by Modeling with Formulas

Solution Thermodynamics

element k Using FEM to Solve Truss Problems

Regression with Stochastic Regressors

Thermodynamics and Equilibrium

Spring 2002 Lecture #17

Section 10 Regression with Stochastic Regressors

Conduction Heat Transfer

CTN 2/23/16. EE 247B/ME 218: Introduction to MEMS Design Lecture 11m2: Mechanics of Materials. Copyright 2016 Regents of the University of California

Conservation of Energy

...Thermodynamics. If Clausius Clapeyron fails. l T (v 2 v 1 ) = 0/0 Second order phase transition ( S, v = 0)

CHAPTER 3 ANALYSIS OF KY BOOST CONVERTER

Lecture. Polymer Thermodynamics 0331 L Chemical Potential

14 The Boole/Stone algebra of sets

A Note on the Linear Programming Sensitivity. Analysis of Specification Constraints. in Blending Problems

Chem 75 February 16, 2017 Exam 2 Solutions

PHYSICS 536 Experiment 12: Applications of the Golden Rules for Negative Feedback

Chapter 4 Thermodynamics and Equilibrium

ME2142/ME2142E Feedback Control Systems. Modelling of Physical Systems The Transfer Function

ALE 21. Gibbs Free Energy. At what temperature does the spontaneity of a reaction change?

4DVAR, according to the name, is a four-dimensional variational method.

Unit 14 Thermochemistry Notes

15-69C Under the conditions of complete combustion with stoichiometric amount of air.

Inference in Simple Regression

CHEM Thermodynamics. Change in Gibbs Free Energy, G. Review. Gibbs Free Energy, G. Review

Unit 11 Solutions- Guided Notes. What are alloys? What is the difference between heterogeneous and homogeneous mixtures?

Lucas Imperfect Information Model

Chapter 17: Thermodynamics: Spontaneous and Nonspontaneous Reactions and Processes

A method of constructing rock-analysis diagrams a statistical basks.

Lecture 17: Free Energy of Multi-phase Solutions at Equilibrium

CIRCLE YOUR DIVISION: Div. 1 (9:30 am) Div. 2 (11:30 am) Div. 3 (2:30 pm) Prof. Ruan Prof. Naik Mr. Singh

Chapters 29 and 35 Thermochemistry and Chemical Thermodynamics

Physics 107 HOMEWORK ASSIGNMENT #20

Thermodynamics Partial Outline of Topics

Edexcel IGCSE Chemistry. Topic 1: Principles of chemistry. Chemical formulae, equations and calculations. Notes.

PT326 PROCESS TRAINER

Temperature. Chapter Heat Engine

AP CHEMISTRY CHAPTER 6 NOTES THERMOCHEMISTRY

Thermodynamics II. Department of Chemical Engineering. Prof. Kim, Jong Hak

Design of Analog Integrated Circuits

" 1 = # $H vap. Chapter 3 Problems

Non-Ideality Through Fugacity and Activity

Chapter 17 Free Energy and Thermodynamics

Analytical Modeling of Natural Convection in Horizontal Annuli

Supplementary Notes for Chapter 9 Mixture Thermodynamics

Entropy, Free Energy, and Equilibrium

Solution Thermodynamics

Chem 116 POGIL Worksheet - Week 3 - Solutions Intermolecular Forces, Liquids, Solids, and Solutions

A.P. CHEMISTRY. SOLUTIONS AND ACID BASE CHEMISTRY. p 1

55:041 Electronic Circuits

Thermochemistry. Thermochemistry

An Extended Regular Solution Model with Local Volume Fraction

4.8 Degradation of Elastomers by Heat and/or Radiation

CHEM 116 Concentrations and Colligative Properties

Chemistry 1A Fall 2000

Lead/Lag Compensator Frequency Domain Properties and Design Methods

Structure and Drive Paul A. Jensen Copyright July 20, 2003

CHM112 Lab Graphing with Excel Grading Rubric

Find this material useful? You can help our team to keep this site up and bring you even more content consider donating via the link on our site.

( ) 1/ 2. ( P SO2 )( P O2 ) 1/ 2.

Experiment #3. Graphing with Excel

A Note on Equivalences in Measuring Returns to Scale

University of Washington Department of Chemistry Chemistry 453 Winter Quarter 2015

Gibbs-Duhem Equation

Final Exam Spring 2014 SOLUTION

Lecture 12: Chemical reaction equilibria

Unit 9: The Mole- Guided Notes What is a Mole?

CinChE Problem-Solving Strategy Chapter 4 Development of a Mathematical Model. formulation. procedure

WYSE Academic Challenge 2004 Sectional Physics Solution Set

Foundations of Arithmetic

If two volatile and miscible liquids are combined to form a solution, Raoult s law is not obeyed. Use the experimental data in Table 9.

Transcription:

W. M. Whte Gechemstry Chapter 3: Slutns Chapter 3: Slutns and Thermdynamcs f Multcmpnent Systems 3.1 Intrductn In the prevus chapter, we ntrduced thermdynamc tls that allw us t predct the equlbrum mneral assemblage under a gven set f cndtns. Fr example, havng specfed temperature, we were able t determne the pressure at whch the assemblage anrthte+frsterte s n equlbrum wth the assemblage dpsde+spnel+enstatte. In that reactn the mnerals had unque and nvarant cmpstns. In the Earth, thngs are nt qute s smple: these mnerals are present as sld slutns*, wth substtutns f Fe fr Mg, Na fr Ca, and Cr and Fe 3+ fr Al, amng thers. Indeed, mst natural substances are slutns; that s, ther cmpstns vary. Water, whch s certanly the mst nterestng substance at the surface f the Earth and perhaps the mst mprtant, nevtably has a varety f substances dsslved n t. These dsslved substances are themselves ften f prmary gechemcal nterest. Mre t the pnt, they affect the chemcal behavr f water. Fr example, the freezng temperature f an aqueus NaCl slutn s lwer than that f pure water. Yu may have taken advantage f ths phenmenn by spreadng salt t de-ce sdewalks and rads, r addng salt t ce t make ce cream. In a smlar way, the equlbrum temperature and pressure f the plagclase+lvne clnpyrxene+spnel+rthpyrxene reactn depends n the cmpstn f these mnerals. T deal wth ths cmpstnal dependence, we need t develp sme addtnal thermdynamc tls, whch s the bjectve f ths chapter. Ths may seem burdensme at frst: f t were nt fr the varable cmpstn f substances, we wuld already knw mst f the thermdynamcs we need. Hwever, as we wll see n Chapter 4, we can use ths cmpstnal dependence t advantage n recnstructng cndtns under whch a mneral assemblage r a hydrthermal flud frmed. A fnal dffculty s that the valance state f many elements may vary. Irn, fr example, may change frm ts Fe 2+ state t Fe 3+ when an gneus rck weathers. The tw frms f rn have very dfferent chemcal prpertes; fr example Fe 2+ s cnsderably mre sluble n water than s Fe 3+. Anther example f ths knd f reactn s phtsynthess, the prcess by whch CO 2 s cnverted t rganc carbn. These knds f reactns are called xdatn reductn, r redx reactns. The energy yur bran uses t prcess the nfrmatn yu are nw readng cmes frm xdatn f rganc carbn carbn rgnally reduced by phtsynthess n plants. T fully specfy the state f a system, we must specfy ts redx state. We treat redx reactns n the fnal sectn f ths chapter. Thugh Chapter 4 wll add a few mre tls t ur gechemcal tlbx, and treat a number f advanced tpcs n thermdynamcs, t s desgned t be ptnal. Wth cmpletn f ths chapter, yu wll have a suffcent thermdynamc backgrund t deal wth a wde range f phenmena n the Earth, and mst f the tpcs n the remander f ths bk. 3.2 Phase Equlbra 3.2.1 Sme Defntns 3.2.1.1 Phase Phases are real substances that are hmgeneus, physcally dstnct, and (n prncple) mechancally separable. Fr example, the phases n a rck are the mnerals present. Amrphus substances are als phases, s glass r pal wuld be phases. The sugar that wn't dsslve n yur ce tea s a *The naturally ccurng mnerals f varyng cmpstn are referred t as plagclase rather than anrthte, lvne rather than frsterte, clnpyrxene rather than dpsde, and rthpyrxene rather than enstatte. 62 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns dstnct phase frm the tea, but the dsslved sugar s nt. Phase s nt synnymus wth cmpund. Phases need nt be chemcally dstnct: a glass f ce water has tw dstnct phases: water and ce. Many sld cmpunds can exst as mre than ne phase. Nr need they be cmpstnally unque: plagclase, clnpyrxene, lvne, etc., are all phases even thugh ther cmpstn can vary. Thus a fssl n whch the aragnte (CaCO 3 ) s partally retrgraded nt calcte (als CaCO 3 ) cnssts f 2 phases. Systems, and reactns ccurrng wthn them, cnsstng f a sngle phase are referred t as hmgenus ; thse systems cnsstng f multple phases, and the reactns ccurrng wthn them, are referred t as hetergeneus. 3.2.1.2 Speces Speces s smewhat mre dffcult t defne than ether phase r cmpnent. A speces s a chemcal entty, generally an element r cmpund (whch may r may nt be nzed). The term s mst useful n the cntext f gases and lquds. A sngle lqud phase, such as an aqueus slutn, may cntan a number f speces. Fr example, H 2 O, H 2 CO 3, HCO 3, CO 2 + 3, H +, and OH are all speces cmmnly present n natural waters. The term speces s generally reserved fr an entty that actually exsts, such as a mlecule, n, r sld n a mcrscpc scale. Ths s nt necessarly the case wth cmpnents, as we shall see. The term speces s less useful fr slds, althugh t s smetmes appled t the pure end-members f sld slutns and t pure mnerals. 3.2.1.3 Cmpnent In cntrast t a speces, a cmpnent need nt be a real chemcal entty, rather t s smply an algebrac term n a chemcal reactn. The mnmum number f cmpnents* f a system s rgdly defned as the mnmum number f ndependently varable enttes necessary t descrbe the cmpstn f each and every phase f a system. Unlke speces and phases, cmpnents may be defned n any cnvenent manner: what the cmpnents f yur system are and hw many there are depend n yur nterest and n the level f cmplexty yu wll be dealng wth. Cnsder ur aragntecalcte fssl. If the nly reactn ccurrng n ur system (the fssl) s the transfrmatn f aragnte t calcte, ne cmpnent, CaCO 3, s adequate t descrbe the cmpstn f bth phases. If, hwever, we are als nterested the precptatn f calcum carbnate frm water, we mght have t cnsder CaCO 3 as cnsstng f 2 cmpnents: Ca 2+ and CO 2 3. There s a rule t determne the mnmum number f cmpnents n a system nce yu decde what yur nterest n the system s; the hard part s ften determnng yur nterest. The rule s: c = n - r 3.1 where n s the number f speces r phases, and r s the number f ndependent chemcal reactns pssble between these speces. Let's try t fr ur fssl. n s 2 (calcte and aragnte), r s 1 (the transfrmatn reactn), s c =1; the aragnte calcte fssl has nly ne cmpnent. Thus a system may have nly 1 cmpnent (here n =2 and r = 1), but several phases. Nw let s try the rule n the speces we lsted abve fr water. We have 6 speces: H 2 O, H 2 CO 3, HCO 3, CO 2 + 3, H +, and OH. We can wrte 3 reactns relatng them: H + + CO 3 2 HCO 3 H + + HCO 3 H 2 CO 3 H + + OH H 2 O S equatn 3.1 tells us we need 3 = 6 3 cmpnents t descrbe ths system: CO 3 2 +, H +, and OH. In gneus and metamrphc petrlgy, cmpnents are ften the majr xdes (thugh we may ften chse t cnsder nly a subset f these). On the ther hand, f we were cncerned wth the stpc equlbratn f mnerals wth a hydrthermal flud, 18 O wuld be cnsdered as a dfferent cmpnent than 16 O. * Cautn: sme bks use the term number f cmpnents as synnymus wth mnmum number f cmpnents. 63 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns Al 2 O 3 AlO(OH) Al(OH) 3 H 2 O Fgure 3.1. Graphcal Representatn f the System Al 2 O 3 -H 2 O. Perhaps the mst straghtfrward way f determnng the number f cmpnents s a graphcal apprach. If all phases can be represented n a ne-dmensnal dagram (that s, a straght lne representng cmpstn), we are dealng wth a tw cmpnent system. Fr example, cnsder the hydratn f Al 2 O 3 (crundum) t frm behmte (AlO(OH)) r gbbste Al(OH) 3. Such a system wuld cntan 4 phases (crundum, behmte, gbbste, water), but s nevertheless a tw cmpnent system because all phases may be represented n ne-dmensn f cmpstn space, as s shwn n Fgure 3.1. Because there are tw plymrphs f gbbste, ne f bhemte, and tw ther pssble phases f water, there are 9 phases pssble phases n ths tw-cmpnent system. Clearly, a system may have many mre phases than cmpnents. Smlarly, f a system may be represented n 2 dmensns, t s a three-cmpnent system. Fgure 3.2 s a ternary dagram llustratng the system Al 2 O 3 H 2 O SO 2. The graphcal representatn apprach reaches t practcal lmt n a fur cmpnent system because f the dffculty f representng mre than 3 dmensns n paper. A fur cmpnent system s a quaternary ne, and can be represented wth a three-dmensnal quaternary dagram. It s mprtant t understand that a cmpnent may r may nt have chemcal real- H 2 O w ty. Fr example n the exchange reactn: NaAlS 3 O 8 + K + = KAlS 3 O 8 + Na + d,b g,by,n p ka,ha,d,na c q Al 2 O 3 a,k,s SO 2 Fgure 3.2 Phase dagram fr the system Al 2 O 3 H 2 O SO 2. The lnes are called jns because they jn phases. In addtn t the end-members, r cmpnents, phases represented are g: gbbste, by: bayerte, n: nrstrandte (all plymrphs f Al(OH) 3 ), d: daspre, b: bhemte (plymrphs f AlO(OH)), a: andeluste, k: kyante, s: sllmante (all plymrphs f Al 2 SO 5 ), ka: kalnte, ha: hallyste, d: dckte, na: nacrte (all plymrphs f Al 2 S 2 O 5 (OH) 4 ), and p: pyrphyllte (Al 2 S 4 O 10 (OH) 2 ). There are als 6 plymrphs f quartz (ceste, stshvte, trdymte, crstbalte, a-quartz, and b-quartz). we culd alternatvely defne the exchange peratr KNa -1 (where Na -1 s -1 ml f Na n) and wrte the equatn as: NaAlS 3 O 8 + KNa 1 = KAlS 3 O 8 Here we have 4 speces and 1 reactn and thus a mnmum f 3 cmpnents. Yu can see that a cmpnent s merely an algebrac term. There s generally sme freedm n chsng cmpnents. Fr example, n the ternary (.e., 3 cmpnent) system SO 2 Mg 2 SO 4 MgCaS 2 O 6, we culd chse ur cmpnents t be quartz, dpsde, and frsterte, r we culd chse them t be SO 2, MgO, and CaO. Ether way, we are dealng wth a ternary system (whch cntans MgSO 3 as well as the three ther phases). 3.2.1.4 Degrees f Freedm The number f degrees f freedm n a system s equal t the sum f the number f ndependent ntensve varables (generally T & P) and ndependent cncentratns (r actvtes r chemcal ptentals) f cmpnents n phases that must be fxed t defne unquely the state f the system. A system 64 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns that has n degrees f freedm (.e., s unquely fxed) s sad t be nvarant, ne that has ne degree f freedm s unvarant, etc. Thus n an unvarant system, fr example, we need specfy nly the value f ne varable, fr example, temperature r the cncentratn f ne cmpnent n ne phase, and the value f pressure and all ther cncentratns are then fxed,.e., they can be calculated (assumng the system s at equlbrum). 3.2.2 The Gbbs Phase Rule The Gbbs Phase Rule s a rule fr determnng the degrees f freedm, r varance, f a system at equlbrum. The rule s: ƒ = c - f + 2 3.2 where ƒ s the degrees f freedm, c s the number f cmpnents, and f s the number f phases. The mathematcal analgy s that the degrees f freedm are equal t the number f varables less the number f equatns relatng thse varables. Fr example, n a system cnsstng f just H 2 O, f tw phases f cexst, fr example, water and steam, then the system n unvarant. Three phases cexst at the trple pnt f water, s the system s sad t be nvarant, and T and P are unquely fxed: there s nly ne temperature and ne pressure at whch the three phases f water can cexst (273.15 K and 0.006 bar). If nly ne phase s present, fr example just lqud water, then we need t specfy 2 varables t descrbe cmpletely the system. It desn t matter whch tw we pck. We culd specfy mlar vlume and temperature and frm that we culd deduce pressure. Alternatvely, we culd specfy pressure and temperature. There s nly 1 pssble value fr the mlar vlume f temperature and pressure are fxed. It s mprtant t remember ths apples t ntensve parameters. T knw vlume, an extensve parameter, we wuld have t fx ne addtnal extensve varable (such as mass r number f mles). And agan, we emphasze that all ths apples nly t systems at equlbrum. Nw cnsder the hydratn f crundum t frm gbbste. There are 3 phases, but there need be nly tw cmpnents. If these 3 phases (water, crundum, gbbste) are at equlbrum, we have nly 1 degree f freedm,.e., f we knw the temperature at whch the reactn s ccurrng, the pressure s als fxed. Rearrangng equatn 3.2, we als can determne the maxmum number f phases that can cexst at equlbrum n any system. The degrees f freedm cannt be less than zer, s fr an nvarant, ne cmpnent system, a maxmum f three phases can cexst at equlbrum. In a unvarant necmpnent system, nly 2 phases can cexst. Thus sllmante and kyante can cexst ver a range f temperatures, as can kyante and andaluste. But the three phases f Al 2 SO 5 cexst nly at ne unque temperature and pressure. Let's cnsder the example f the three cmpnent system Al 2 O 3 H 2 O SO 2 n Fgure 3.2. Althugh many phases are pssble n ths system, fr any gven cmpstn f the system nly three phases can cexst at equlbrum ver a range f temperature and pressure. Fur phases, e.g., a, k, s and q, can cexst nly at pnts f ether fxed pressure r fxed temperature. Such pnts are called unvarant pnts. Fve phases can cexst at nvarant pnts at whch bth temperature and pressure are unquely fxed. Turnng ths arund, f we fund a metamrphc rck whse cmpstn fell wthn the Al 2 O 3 H 2 O SO 2 system, and f the rck cntaned 5 phases, t wuld be pssble t determne unquely the temperature and pressure at whch the rck equlbrated. J. Wllard Gbbs (1839-1903) s vewed by many as the father f thermdynamcs. He receved the frst dctrate n engneerng granted n the U. S., frm Yale n 1858. He was Prfessr f Mathematcal Physcs at Yale frm 1871 untl hs death. He als helped t fund statstcal mechancs. The mprtance f hs wrk was nt wdely recgnzed by hs Amercan clleagues, thugh t was n Eurpe, untl well after hs death. 65 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns 3.2.3 The Clapeyrn Equatn A cmmn prblem n gechemstry s t knw hw a phase bundary vares n P-T space, e.g., hw a meltng temperature wll vary wth pressure. At a phase bundary, tw phases must be n equlbrum,.e., DG must be 0 fr the reactn Phase 1 Phase 2. The phase bundary therefre descrbes the cndtn: d(dg r ) = DV r dp - DS r dt = 0. Thus the slpe f a phase bundary n a temperature-pressure dagram s: dt Vr = D 3.3 dp DSr where DV r and DS r are the vlume and entrpy changes asscated wth the reactn. Equatn 3.3 s knwn as the Clausus-Clapeyrn Equatn, r smply the Clapeyrn Equatn. Because DV r and DS r are functns f temperature and pressure, ths, f curse, s nly an nstantaneus slpe. Fr many reactns, hwever, partcularly thse nvlvng nly slds, the temperature and pressure dependences f DV r and DS r wll be small and the Clapeyrn slpe wll be relatvely cnstant ver a large T and P range. Because DS = DH/T, the Clapeyrn equatn may be equvalently wrtten as: dt T Vr = D 3.4 dp DH r Slpes f phase bundares n P-T space are generally pstve, mplyng that the phases wth the largest vlumes als generally have the largest entrpes (fr reasns that becme clear frm a statstcal mechancal treatment). Ths s partcularly true f sld-lqud phase bundares, althugh there s ne very mprtant exceptn: water. Hw d we determne the pressure and temperature dependence f DV r and why s DV r relatvely T and P ndependent n slds? 3.3 Slutns Slutns are defned as hmgeneus phases prduced by dsslvng ne r mre substances n anther substance. In gechemstry we are ften cnfrnted by slutns: as gases, lquds, and slds. Free energy depends nt nly n T and P, but als n cmpstn. In thermdynamcs t s generally mst cnvenent t express cmpstns n terms f mle fractns, X, the number f mles f dvded by the ttal mles n the substance (mles are weght dvded by atmc r mlecular weght). The sum f all the X must, f curse, ttal t 1. Slutns are dstnct frm purely mechancal mxtures. Fr example, salad dressng (l and vnegar) s nt a slutn. Smlarly, we can grnd anrthte (CaAl 2 S 2 O 8 ) and albte (NaAlS 3 O 8 ) crystals nt a fne pwder and mxture them, but the result s nt a plagclase sld slutn. The Gbbs Free Energy f mechancal mxtures s smply the sum f the free energy f the cmpnents. If, hwever, we heated the anrthte-albte mxture t a suffcently hgh temperature that the knetc barrers were vercme, there wuld be a rerderng f atms and the creatn f a true slutn. Because ths rerderng s a spntaneus chemcal reactn, there must be a decrease n the Gbbs Free Energy asscated wth t. Ths slutn wuld be stable at 1 atm and 25 C. Thus we can cnclude that the slutn has a lwer Gbbs Free Energy than the mechancal mxture. On the ther hand, vnegar wll never dsslve n l at 1 atm and 25 C because the Gbbs Free Energy f that slutn s greater than that f the mechancal mxture. 66 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns Example 3.1: The Graphte-Damnd Transtn At 25 C the graphte-damnd transtn ccurs at 1600 MPa (megapascals, 1 MPa =10 b). Usng the standard state (298 K, 0.1 MPa) data belw, predct the pressure at whch the transfrmatn ccurs when temperature s 1000 C. Graphte Damnd a (K 1 ) 1.05 10-05 7.50 10-06 b (MPa -1 ) 3.08 10-05 2.27 10-06 S (J/K-ml) 5.74 2.38 V (cm 3 /ml) 5.2982 3.417 Answer: We can use the Clapeyrn equatn t determne the slpe f the phase bundary. Then, assumng that DS and DV are ndependent f temperature, we can extraplate ths slpe t 1000 C t fnd the pressure f the phase transtn at that temperature. Frst, we calculate the vlumes f graphte and damnd at 1600 MPa as: V = V (1 bdp) 3.5 where DP s the dfference between the pressure f nterest (1600 MPa n ths case) and the reference pressure (0.1 MPa). Dng s, we fnd the mlar vlumes t be 5.037 fr graphte and 3.405 fr damnd, s DV r s 1.6325 cc/ml. The next step wll be t calculate DS at 1600 MPa. The pressure dependence f entrpy s gven by equatn 2.143: S/ P) T = av. Thus t determne the effect f pressure we ntegrate: S P =S + P 1 P S 1 dp =S + avdp 3.6 P Pref T (We use S p t ndcate the entrpy at the pressure f nterest and S the entrpy at the reference pressure.) We need t express V as a functn f pressure, s we substtute 3.5 nt 3.6: S P =S + P 1 Pref Pref av (1 bp)dp =S av DP b 2 (P 1 2 P 2 ref ) 3.7 The reference pressure, P ref, s neglgble cmpared t P 1 (0.1 MPa vs 1600 PMa), s that ths smplfes t: S P =S av DP b 2 P 1 2 Fr graphte, S p s 5.66 J/K-ml, fr damnd, t s 2.34 J/K-ml, s DS r at 1600 MPa s -3.32 J-K -1 - ml -1. The Clapeyrn slpe s therefre: DS DV = 3.322 1.63 = 2.035 JK-1 cm -3 One dstnct advantage f the SI unts s that cm 3 = J/MPa, s the abve unts are equvalent t K/MPa. Frm ths, the pressure f the phase change at 1000 C can be calculated as: P 1000 = P 298 + DT DS DV =1600 + 975 2.035 = 3584 MP The Clapeyrn slpe we calculated (sld lne) s cmpared wth the expermentally determned phase bundary n Fgure 3.3. Our calculated phase bundarys lnear whereas the expermental ne s nt. The curved nature f the bserved phase bundaryndcates DV and DS are pressure and temperature dependent Ths s ndeed the case, partcularly fr graphte. A mre accurate estmate f the vlume change requres b be expressed as a functn f pressure. Pressure, MPa 10000 8000 6000 4000 2000 Damnd Graphte 0 0 500 1000 1500 2000 2500 Temperature, C Fgure 3.3. Cmparsn f the graphte-damndphase bundarycalculated frm thermdynamc data and the Clapeyrn slpe (sld lne) wth the expermentally bserved phase bundary (dashed lne). 67 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns 3.3.1 Rault's Law Wrkng wth slutns f ethylene brmde and prpylene brmde, Rault ntced that the vapr pressures f the cmpnents n a slutn were prprtnal t the mle fractns f thse cmpnents: P = X P 3.8 where P s the vapr pressure f cmpnent abve the slutn, X s the mle fractn f n slutn, and P s the vapr pressure f pure under standard cndtns. Assumng the partal pressures are addtve and the sum f all the partal pressures s equal t the ttal gas pressure (SP = P ttal ): P = X P 3.9 ttal Thus partal pressures are prprtnal t ther mle fractns. Ths s the defntn f the partal pressure f the th gas n a mxture. Rault's Law hlds nly fr deal slutns,.e., substances where there are n ntermlecular frces. It als hlds t a gd apprxmatn where the frces between lke mlecules are the same as between dfferent mlecules. The tw cmpnents Rault was wrkng wth were very smlar chemcally, s that ths cndtn held and the slutn was nearly deal. As yu mght guess, nt all slutns are deal. Fg. 3.4 shws the varatns f partal pressures abve a mxture f water and dxane. Sgnfcant devatns frm Rault's Law are the rule except where X appraches 1. 60 50 P B 40 P (mm Hg) 30 20 P A 10 (A) H 2 O 0.2 0.4 0.6 0.8 (B) Fgure 3.4. Vapr pressure f water and dxane n a water-dxane mxture shwng devatns frm deal mxng. Shaded areas are areas where Rault's Law (dashed lnes). Henry's Law slpes are shwn as dt-dashed lnes. After Nrdstrm and Munz (1986). Francs Mare Rault (1830-1901), French chemst. 68 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns 3.3.2 Henry's Law Anther useful apprxmatn ccurs when X appraches 0. In ths case, the partal pressures are nt equal t the mle fractn tmes the vapr pressure f the pure substance, but they d vary lnearly wth X. Ths behavr fllws Henry s Law, whch s: P = hx fr X <<1 3.10 where h s knwn as the Henry's Law cnstant. 3.4 Chemcal Ptental 3.4.1 Partal Mlar Quanttes Free energy and ther thermdynamc prpertes are dependent n cmpstn. We need a way f expressng ths dependence. Fr any extensve prperty f the system, such as vlume, entrpy, energy, r free energy, we can defne a partal mlar value, whch expresses hw that prperty wll depend n changes n amunt f ne cmpnent. Fr example, we can defne partal mlar vlume f cmpnent n phase f as: Ê V v f = ˆ Á such that V = Â nv Ë n 3.11 T, P, n j, j π (we wll use small letters t dente partal mlar quanttes; the superscrpt refers t the phase and the subscrpt refers t the cmpnent). The Englsh nterpretatn f equatn 3.11 s that the partal mlar vlume f cmpnent n phase f tells us hw the vlume f phase f wll vary wth an nfntesmal addtn f cmpnent, f all ther varables are held cnstant. Fr example, the partal mlar vlume f Na n an aqueus slutn such as seawater wuld tell us hw the vlume f that slutn wuld change fr an nfntesmal addtn f Na. In ths case wuld refer t the Na cmpnent and f wuld refer t the aqueus slutn phase. In Table 2.2, we see that the mlar vlumes f the albte Pl and anrthte end-members f the plagclase sld slutn are dfferent. We culd defne v Ab as the partal mlar vlume f albte n plagclase, whch wuld tell us hw the vlume f plagclase wuld vary fr an nfntesmal addtn f albte. (In ths example, we have chsen ur cmpnent as albte rather than Na. Whle we culd have chsen Na, the chce f albte smplfes matters because the replacement f Na wth Ca s accmpaned by the replacement f S by Al.) Anther example mght be a slutn f water and ethanl. The varatn f the partal mlar vlumes f water and ethanl n a bnary slutn s llustrated n Fgure 3.5. Ths system llustrates very clearly why the qualfcatn fr an nfntesmal addtn s always added: the value f a partal mlar quantty f a cmpnent may vary wth the amunt f that cmpnent present. Equatn 3.11 can be generalzed t all partal mlar quanttes and als expresses an mprtant prperty f partal mlar quanttes: an extensve varable f a system r phase s the sum f t s partal mlar quanttes fr each cmpnent n the system. In ur example abve, ths means that the vlume f plagclase s the sum f the partal mlar vlume f the albte and anrthte cmpnents. Generally, we fnd t mre cnvenent t cnvert extensve prpertes t ntensve prpertes by dvdng by the ttal number f mles n the system, Sn. Dvdng bth sdes f equatn 3.11 by Sn we have: V = Â X v 3.12 Ths equatn says that the mlar vlume f a substance s the sum f the partal mlar vlumes f ts cmpnents tmes ther mle fractns. Fr a pure phase, the partal mlar vlume equals the mlar vlume snce X=1. named fr Englsh chemst Wllam Henry (1775-1836), wh frmulated t. 69 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns 3.4.2 Defntn f Chemcal Ptental and Relatnshp t Gbbs Free Energy We defne µ as the chemcal ptental, whch s smply the partal mlar Gbbs Free Energy: Ê m = G ˆ Á 3.13 Ë n PT,, n j, jπ The chemcal ptental thus tells us hw the Gbbs Free Energy wll vary wth the number f mles, n, f cmpnent hldng temperature, pressure, and the number f mles f all ther cmpnents cnstant. We sad that the Gbbs Free Energy f a system s a measure f the capacty f the system t d chemcal wrk. Thus the chemcal ptental f cmpnent s the amunt by whch ths capacty t d chemcal wrk s changed fr an nfntesmal addtn f cmpnent at cnstant temperature and pressure. In a NCd battery (cmmn rechargeable batteres) fr example, the chemcal ptental f N n the battery (ur system) s a measure f the capacty f the battery t prvde electrcal energy per mle f addtnal N fr an nfntesmal addtn. The ttal Gbbs Free Energy f a system wll depend upn cmpstn as well as n temperature and pressure. The equatns we ntrduced fr Gbbs Free Energy n Chapter 2 fully descrbe the Gbbs Free Energy nly fr sngle cmpnents systems r systems cntanng nly pure phases. The Gbbs Free Energy change f a phase f varable cmpstn s fully expressed as: dg = VdP - SdT + Â mdn 3.14 3.4.3 Prpertes f the Chemcal Ptental We nw want t cnsder tw mprtant prpertes f the chemcal ptental. T llustrate these prpertes, cnsder a smple tw-phase system n whch an nfntesmal amunt f cmpnent s transferred frm phase b t phase a, under cndtns where T, P, and the amunt f ther cmpnents s held cnstant n each phase. One example f such a reactn wuld be the transfer f Pb frm a hydrthermal slutn t a sulfde mneral phase. The chemcal ptental expresses the change n Gbbs Free Energy under these cndtns: a b a a b b dg = dg + dg = m dn + m dn 3.15 snce we are hldng everythng else cnstant, what s ganed by a must be lst by b, s dn a = dn b and: a b dg = m - m dn 3.16 ( ) a At equlbrum, dg = 0, and therefre m = m b Equatn 3.17 reflects a very general and very mprtant relatnshp, namely: In a system at equlbrum, the chemcal ptental f every cmpnent n a phase s equal t the chemcal ptental f that cmpnent n every ther phase n whch that cmpnent s present. 58 56 54 V 52 (ml/ml) 18 16 14 Ethanl Water 0.1 0.2 0.3 0.4 0.5 0.6 X Ethanl Fgure 3.5. Varatn f the partal mlar vlumes f water and ethanl as a functn f the mle fractn f ethanl n a bnary slutn. Ths fgure als llustrates the behavr f a very nn-deal slutn. 3.17 70 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns Equlbrum s the state tward whch systems wll naturally transfrm. The Gbbs Free Energy s the chemcal energy avalable t fuel these transfrmatns. We can regard dfferences n chemcal ptentals as the frces drvng transfer f cmpnents between phases. In ths sense, the chemcal ptental s smlar t ther frms f ptental energy, such as gravtatnal r electrmagnetc. Physcal systems spntaneusly transfrm s as t mnmze ptental energy. Thus fr example, water n the surface f the Earth wll mve t a pnt where t s gravtatnal ptental energy s mnmzed,.e., dwnhll. Just as gravtatnal ptental energy drves ths mtn, the chemcal ptental drves chemcal reactns, and just as water wll cme t rest when gravtatnal energy s mnmzed, chemcal reactns wll cease when chemcal ptental s mnmzed. S n ur example abve, the spntaneus transfer f Pb between a hydrthermal slutn and a sulfde phase wll ccur untl the chemcal ptentals f Pb n the slutn and n the sulfde are equal. At ths pnt, there s n further energy avalable t drve the transfer. We defned the chemcal ptental n terms f the Gbbs Free Energy. Hwever, n hs rgnal wrk, Gbbs based the chemcal ptental n the nternal energy f the system. As t turns ut, hwever, the quanttes are the same: Ê m = G ˆ Ê Á = U ˆ Á 3.18 Ë n Ë n PT,, n j, jπ SV,, nj, jπ It can be further shwn (but we wn t) that: Ê m = G ˆ Ê Á = U ˆ Ê Á = H ˆ Ê Á = A ˆ Á Ë n Ë n Ë n Ë n 3.4.4 The Gbbs-Duhem Relatn PT,, n π SV n π SPn j, j,, j, j,, j, jπ T, V, n j, jπ Snce µ s the partal mlar Gbbs Free Energy, the Gbbs Free Energy f a system s the sum f the chemcal ptentals f each cmpnent: Ê G ˆ G = ÂÁ = Ânm 3.19 Ë n PT,, n j, jπ The dfferental frm f ths equatn (whch we get smply by applyng the chan rule) s: dg = n dm + m dn   3.20 Equatng ths wth equatn 3.14, we btan: ndm + m dn = VdP - SdT + m dn    3.21 Rearrangng, we btan the Gbbs-Duhem Relatn: VdP -SdT -  n dm = 0 3.22 The Gbbs-Duhem Equatn descrbes the relatnshp between smultaneus changes n pressure, temperature and cmpstn n a sngle-phase system. In a clsed system at equlbrum, net changes n chemcal ptental wll ccur nly as a result f changes n temperature r pressure. At cnstant temperature and pressure, there can be n net change n chemcal ptental at equlbrum:  nd m = 0 3.23 Ths equatn further tells us that the chemcal ptentals d nt vary ndependently, but change n a related way. In a clsed system, nly ne chemcal ptental can vary ndependently. Fr example, cnsder a tw cmpnent system. Then we have n 1 dµ 1 + n 2 dµ 2 = 0 and dµ 2 = (n 1 /n 2 )dµ 1. If a gven varatn n cmpstn prduces a change n µ 1 then there s a cncmtant change n µ 2. 71 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns Fr mult-phase systems, we can wrte a versn f the Gbbs-Duhem relatn fr each phase n the system. Fr such systems, the Gbbs-Duhem relatn allws us t reduce the number f ndependently varable cmpnents n each phase by ne. We wll return t ths pnt later n the chapter. We can nw state an addtnal prperty f chemcal ptental: In spntaneus prcesses, cmpnents r speces are dstrbuted between phases s as t mnmze the chemcal ptental f all cmpnents. Ths allws us t make ne mre characterzatn f equlbrum: equlbrum s pnt where the chemcal ptental f all cmpnents s mnmzed. 3.4.5 Dervatn f the Phase Rule Anther sgnfcant aspect f the Gbbs-Duhem Equatn s that the phase rule can be derved frm t. We begn by recallng that the varance f a system (the number f varables that must be fxed r ndependently determned t determne the rest) s equal t the number f varables less the number f equatns relatng them. In a multcmpnent sngle phase system, cnsstng f c cmpnents, there are c +2 unknwns requred t descrbe the equlbrum state f the system: T, P, µ 1, µ 2,...µ c. But n a system f f phases at equlbrum, we can wrte f versns f equatn 3.23, whch reduces the ndependent varables by f. Thus the number f ndependent varables that must be specfed t descrbe a system f c cmpnents and f phases s: f = c + 2 -f whch s the Gbbs phase rule. Specfcatn f ƒ varables wll cmpletely descrbe the system, at least wth the qualfcatn that n thermdynamcs we are nrmally unnterested n the sze f the system, that s, n extensve prpertes such as mass, vlume, etc. (thugh we are nterested n ther ntensve equvalents) and utsde frces r felds such as gravty, electrc r magnetc felds, etc. Nevertheless, the sze f the system s descrbed as well, prvded nly that ne f the ƒ varables s extensve. 3.5 Ideal Slutns Havng placed anther tl, the chemcal ptental, n ur thermdynamc tlbx, we are ready t cntnue ur cnsderatn f slutns. We wll begn wth deal slutns, whch, lke deal gases, are fctns that avd sme f the cmplcatns f real substances. Fr an deal slutn, we make an assumptn smlar t ne f thse made fr an deal gas, namely that there were n frces between mlecules. In the case f deal slutns, whch may be gases, lquds, r slds, we can relax ths assumptn smewhat and requre nly that the nteractns between dfferent knds f mlecules n an deal slutn are the same as thse between the same knds f mlecules. 3.5.1 Chemcal Ptental n Ideal Slutns Hw des chemcal ptental vary n an deal slutn? Cnsder the vapr pressure f a gas. The dervatve f G wth respect t pressure at cnstant temperature s vlume: Ê G ˆ Á = V Ë P Wrtten n terms f partal mlar quanttes: If the gas s deal, then: T Ê m ˆ Á = Ë P and f we ntegrate frm P t P we btan: T, deal RT P Ê m ˆ Á = v Ë P T 3.24 72 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns P P P m - m = RT ln 3.25 P where µ P s the chemcal ptental f the pure gas at the reference (standard state) pressure P. Ths s the standard-state chemcal ptental and s wrtten as µ. If we let P be the vapr pressure f pure and P be the vapr pressure f n an deal slutn, then we may substtute X fr P/P nt Rault's Law (Equatn 3.8) and t btan the fllwng: m, deal = m + RT ln X 3.26 Ths equatn descrbes the relatnshp between the chemcal ptental f cmpnent and ts mle fractn n an deal slutn. 3.5.2 Vlume, Enthalpy, Entrpy, and Free Energy Changes n Ideal Slutns We wll be able t generalze a frm f ths equatn t nn-deal cases a bt later. Let's frst cnsder sme ther prpertes f deal mxtures. Fr real slutns, any extensve thermdynamc prperty such as vlume can be cnsdered t be the sum f the vlume f the cmpnents plus a vlume change due t mxng: V =  XV + DVmxng 3.27 The frst term n the rght reflects the vlume resultng frm mechancal mxng f the varus cmpnents. The secnd term reflects vlume changes asscated wth slutn. Fr example, f we mxed 100 ml f ethanl and 100 ml f water (Fgure 3.5), the vlume f the resultng slutn wuld be 193 ml. Here, the value f the frst term n the rght wuld be 200 ml, the value f the secnd term wuld be -7 ml. We can wrte smlar equatns fr enthalpy, etc. But the vlume change and enthalpy change due t mxng are bth 0 n the deal case. Ths s true because bth vlume and enthalpy changes f mxng arse frm ntermlecular frces, and, by defntn, such ntermlecular frces are absent n the deal case. Thus: DV deal mxng = 0 therefre: V = X v = XV  deal  and DH deal mxng = 0 and therefre: H = Xh = X H  deal  Ths, hwever, s nt true f entrpy. Yu can magne why: f we mx tw substances n an atmc level, the number f pssble arrangements f ur system ncreases even f they are deal substances. The entrpy f deal mxng s (cmpare equatn 2.110): D S = -R X ln X 3.28 deal mxng S = X S - R X X deal slutn   ln 3.29 Because DG mxng = DH mxng TDS mxng and DH mxng = 0, t fllws that: D G = RT X ln X 3.30 deal mxng We stated abve that the ttal expressn fr an extensve prperty f a slutn s the sum f the partal mlar prpertes f the pure phases (tmes the mle fractns) plus the mxng term. The partal mlar Gbbs Free Energy s the chemcal ptental, s the full expressn fr the Gbbs Free Energy f an deal slutn s: 73 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns   D G = X m + RT X ln X 3.31 deal slutn Rearrangng terms, we can re-express equatn 3.31 as: D G = X m + RT ln X 3.32  deal slutn ( ) The term n parentheses s smply the chemcal ptental f cmpnent, µ, as expressed n equatn 3.26. Substtutng equatn 3.26 nt 3.32, we have  D G = X m deal slutn Nte that µ s always less than r equal t µ because the term RTln X s always negatve (because the lg f a fractn s always negatve). Let's cnsder deal mxng n the smplest case, namely bnary mxng. Fr a tw cmpnent (bnary) system, X 1 = (1 X 2 ), s we can wrte equatn 3.30 fr the bnary case as: [ ] D Gdeal mxng = RT ( 1- X )ln( 1- X ) + X ln X 3.33 2 2 2 2 3.34 Snce X 2 s less than 1, DG s negatve and becmes ncreasngly negatve wth temperature, as llustrated n Fgure 3.6. The curve s symmetrcal wth respect t X;.e., the mnmum ccurs at X 2 = 0.5. Nw let s see hw we can recver nfrmatn n µ frm plts such as Fgure 3.6, whch we wll call G-bar X plts. Substtutng X 1 = (1 X 2 ) nt equatn 3.33, t becmes: D G = m ( 1 - X ) + m X =m + ( m -m ) X 3.35 deal slutn 1 2 2 2 1 2 2 2 Ths s the equatn f a straght lne n such a plt wth slpe f (µ 2 µ 1 ) and ntercept µ 1. Ths lne s llustrated n Fgure 3.7. The curved lne s descrbed by equatn 3.31. The dashed lne s gven by equatn 3.35. Bth equatn 3.31 and 3.35 gve the same value f G fr a gven value f X 2, such as X 2. Thus the straght lne and the curved ne n Fgure 3.7 much tuch at X 2. In fact, the straght lne s the tangent t the curved ne at X 2. The ntercept f the tangent at X 2 = 0 s µ 1 and the ntercept at X 2 = 1 s µ 2. The pnt s, n a plt f mlar free energy vs. mle fractn (a G-X dagram), we can determne the chemcal ptental f cmpnent n a tw cmpnent system by extraplatng a tangent f the free energy curve t X = 1. We see that n Fgure 3.7, as X 1 appraches 1 (X 2 appraches 0), the ntercept f the tangent appraches µ 1,.e., µ 1 appraches µ 1. Lkng at equatn 3.26, ths s exactly what we expect. Fgure 3.7 llustrates the case f an deal slutn, but the ntercept methd apples t nn-deal slutns as well, as we shall see. Fnally, nte that the sld lne, the lne cnnectng the µ s s the Gbbs Free Energy f a mechancal mxture f cmpnents 1 and 2, whch we may express as:  D G = X m mxture 3.36 Yu shuld satsfy yurself that the DG mxng s the dfference between ths lne and the free energy curve: G G G 15 = - 3.37 0 X 2 1 deal mx. deal sl. mxture G deal mxng kj/ml 0 5 10 T = 0 K 298.15 K 500 K 1000 K 1500 K 2000 K Fgure 3.6. Free energy f mxng as a functn f temperature n the deal case. 74 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns G (per mle) m 1 G mxture = X 1 m 1 +X 2 m 2 m' 1 G deal sl. = m 1 +(m 2 m 1 )X 2 Gdeal sl. = G m xture+ D G m xng 0 1 X 2 Fgure 3.7. Mlar free energy n an deal mxture and graphcal llustratn f equatn 3.31. After Nrdstrm & Munz, 1986. ' X 2 3.6 Real slutns We nw turn ur attentn t real slutns, whch are smewhat mre cmplex than deal nes, as yu mght magne. We wll need t ntrduce a few new tls t help us deal wth these cmplextes. 3.6.1 Chemcal Ptental n Real Slutns Let s cnsder the behavr f a real slutn n vew f the tw slutn mdels we have already ntrduced: Rault s Law and Henry s Law. Fgure 3.8 llustrates the varatn f chemcal ptental as a functn f cmpstn n a hypthetcal real slutn. We can dentfy 3 regns where the behavr f the chemcal ptental s dstnct: 1.) The frst s where the mle fractn f cmpnent X s clse t 1 and Rault's Law hlds. In ths case, the amunt f slute dsslves n s trvally small, s mlecular nteractns nvlvng slute mlecules d nt sgnfcantly affect the thermdynamc prpertes f the slutn, and the behavr f µ s clse t that n an deal slutn: m, deal = m + RT ln X (3.26) 2.) At the ppste end s the case where X s very small. Here nteractns between tw cmpnent mlecules are extremely rare, and the behavr f µ s essentally cntrlled by nteractns between and thse f the slvent. Whle the behavr f µ s nt deal, t s nnetheless a lnear functn f ln X. Ths s the regn where Henry s Law hlds. The cmpstnal dependence f the chemcal ptental n ths regn can be expressed as: m = m + RT ln hx 3.38 where h s the Henry s Law cnstant defned n equatn 3.10. Ths equatn can be rewrtten as: m = m + RT ln X + RT ln h 3.39 DG mxng By defntn, h s ndependent f cmpstn at cnstant T and P and can be regarded as addng a fxed amunt t the standard state chemcal ptental (a fxed amunt t the ntercept n Fg. 3.8). By ndependent f cmpstn, we mean t s ndependent f X, the mle fractn f the cmpnent f nterest. h wll, f curse depend n the nature f the slutn. Fr example, f Na s ur cmpnent f nterest, h Na wll nt be the same fr an electrlyte slutn as fr a slcate melt. We can defne a new term, µ*, as: * m m + RT ln h 3.40 Substtutng 3.40 nt 3.39 we btan: m * m + RT ln X 3.41 m 2 m' 2 75 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns When pltted aganst ln X, the chemcal ptental f n the range f very dlute slutns s gven by a straght lne wth slpe RT and ntercept µ* (the ntercept s at X = 1 and hence ln X = 0 and µ = µ*). Thus µ* can be btaned by extraplatng the Henry's Law slpe t X = 1. We can thnk f µ* as the chemcal ptental n the hypthetcal standard state f Henry's Law behavr at X = 1. 3.) The thrd regn f the plt s that regn f real slutn behavr between the regns where Henry's Law and Rault's Law apply. In ths regn, µ s nt a lnear functn f ln X. We wll ntrduce a new parameter, actvty, t deal wth ths regn. 3.6.2 Fugactes The tls we have ntrduced t deal wth deal slutns and nfntely dlute nes are based n bservatns f the gaseus state: Rault s Law and Henry s Law. We wll cntnue t make reference t gases n dealng wth real slutns that fllw nether law. Whle ths apprach has a largely hstrcal bass, t s nevertheless a cnsstent ne. S m* m m 0 ln X - fllwng ths pattern, we wll frst ntrduce the cncept f fugacty, and derve frm t a mre general parameter, actvty. In the range f ntermedate cncentratns, the partal pressure f the vapr f cmpnent abve a slutn s generally nt lnearly related t the mle fractn f cmpnent n slutn. Thus chemcal ptental f cannt be determned frm equatns such as 3.26, whch we derved n the assumptn that the partal pressure was prprtnal t the mle fractn. T deal wth ths stuatn, chemsts nvented a fcttus partal pressure, fugacty. Fugacty may be thught f as the escapng tendency f a real gas frm a slutn. It was defned t have the same relatnshp t chemcal ptental as the partal pressure f an deal gas: f m = m + RT ln 3.42 f where ƒ s the standard-state fugacty, whch s analgus t standard-state partal pressure. We are free t chse the standard state, but the standard state fr ƒ and µ must be the same. ƒ s analgus t the standard state partal pressure, P, f an deal gas. If we chse ur standard state t be the pure substance, then ƒ s dentcal t P, but we may wsh t chse sme ther standard state where ths wll nt be the case. Snce the behavr f real gases appraches deal at lw pressures, the fugacty wll apprach the partal pressure under these crcumstances. Thus the secnd part f the defntn f fugacty s: f lm = 1 3.43 P Æ0 P Fr an deal gas, fugacty s dentcal t partal pressure. Snce, as we stated abve, fugacty bears the same relatnshp t chemcal ptental (and ther state functns) f a nn-deal substance as pressure f a nn-deal gas, we substtute fugacty fr pressure n thermdynamc equatns. The relatnshp between pressure and fugacty can be expressed as: Rault's Law m = m * + RT ln X m = m + RT ln X Real Slutns Henry's Law Fgure 3.8. Schematc plt f the chemcal ptental f cmpnent n slutn as a functn f ln X. Here µ s the chemcal ptental f pure at the pressure and temperature f the dagram. After Nrdstrm and Munz (1986). 76 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns ƒ = fp 3.44 where f s the fugacty ceffcent, whch wll be a functn f temperature and pressure dffer fr each real gas. The fugacty ceffcent expresses the dfference n the pressure between a real gas and an deal gas under cmparable cndtns. Kerrch and Jacbs (1981) ftted the Redlch-Kwng equatn (equatn 2.15) t bservatns n the vlume, pressure and vlume f H 2 O and CO 2 t btan values fr the ceffcents a and b n equatn 2.15. Frm these, they btaned fugacty ceffcents fr these gases at a seres f temperatures and pressures. These are gven n Table 3.1. 3.6.3 Actvtes and Actvty Ceffcents Fugactes are thermdynamc functns Frm Kerrck and Jacbs (1981). that are drectly related t chemcal ptental and can be calculated frm measured P-T-V prpertes f a gas, thugh we wll nt dscuss hw. Hwever, they have meanng fr slds and lquds as well as gases snce slds and lquds have fnte vapr pressures. Whenever a substance exerts a measurable vapr pressure, a fugacty can be calculated. Fugactes are relevant t the equlbra between speces and phase cmpnents, because f the vapr phases f the cmpnents f sme sld r lqud slutns are n equlbrum wth each ther, and wth ther respectve sld r lqud phases, then the speces r phases cmpnents n the sld r lqud must be n equlbrum. One mprtant feature f fugactes s that we can use them t defne anther thermdynamc parameter, the actvty, a: a f 3.45 f Table 3.1. H 2 O and CO 2 Fugacty Ceffcents H 2 O T C P, MPa 400 600 800 1000 50 0.4 0.78 0.91 200 0.2 0.52 0.79 0.94 400 0.21 0.54 0.84 1.03 600 0.28 0.67 1.01 1.22 800 0.4 0.89 1.27 1.49 CO 2 T C P, MPa 377 577 777 977 50 1.02 1.1 1.12 1.12 200 1.79 1.86 1.82 1.75 400 4.91 4.18 3.63 3.22 600 13.85 9.48 7.2 5.83 800 38.73 21.33 14.15 10.44 ƒ s the standard state fugacty. Its value depends n the standard state yu chse. Yu are free t chse a standard state cnvenent fr whatever prblem yu are addressng. If we substtute equatn 3.45 nt equatn 3.42, we btan the mprtant relatnshp: m = m + RT ln a 3.46 The catch n selectng a standard state fr ƒ, and hence fr determnng a n equatn 3.46, s that ths state must be the same as the standard state fr µ. Thus we need t bear n mnd that standard states are mplct n the defntn f actvtes and that thse standard states are ted t the standardstate chemcal ptental. Untl the standard state s specfed, actvtes have n meanng. Cmparng equatn 3.46 wth3.26 leads t: a,deal = X 3.47 Thus n deal slutns, the actvty s equal t the mle fractn. Chemcal ptentals can be thught f as drvng frces that determne the dstrbutn f cmpnents between phases f varable cmpstn n a system. Actvtes can be thught f as the effectve cncentratn r the avalablty f cmpnents fr reactn. In real slutns, t wuld be cnvenent t relate all nn-deal thermdynamc parameters t the cmpstn f the slutn, because cmpstn s generally readly and accurately measured. T relate actvtes t mle fractns, we defne a new parameter, the ratnal actvty ceffcent, l. The relatnshp s: 77 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns Example 3.2. Usng Fugacty t Calculate Gbbs Free Energy The mnerals bructe (Mg(OH) 2 ) and perclase (MgO) are related by the reactn: Mg(OH) 2 MgO + H 2 O Whch sde f ths reactn represent the stable phase assemblage at 600 C and 200 MPa? Answer: We learned hw t slve ths srt f prblem n Chapter 2: the sde wth the lwest Gbbs Free Energy wll be the stable assemblage. Hence, we need nly t calculate DG r at 600 C and 200 MPa. T d s, we use equatn 2.131: Ú D G = D G - D S dt + D V dp TP ' ' T ' T ref r Ú T ' T ref r (2.131) Our earler examples dealt wth slds, whch are ncmpressble t a gd apprxmatn, and we culd smply treat DV r as beng ndependent f pressure. In that case, the slutn t the frst ntegral n the left was smply DV r (P - P ref ). The reactn n ths case, lke mst metamrphc reactns, nvlves H 2 O, whch s certanly nt ncmpressble: the vlume f H 2 O, as steam r a supercrtcal flud, s very much a functn f pressure. Let s slate the dffculty by dvdng DV r nt tw parts: the vlume change f reactn due t the slds, n ths case the dfference between mlar vlumes f perclase and bructe, and the vlume change due t H 2 O. We wll dente the frmer as DV S and assume that t s ndependent f pressure. The secnd ntegral n 2.131 then becmes: Ú P' Pref Ú s D VdP = DV ( P' - P ) + V dp 3.48 2 r ref Hw d we slve the pressure ntegral abve? One apprach s t assume that H 2 O s an deal gas. RT Fr an deal gas: V = P P' RT s that the pressure ntegral becmes: P dp RT P' Ú = ln Pref Steam s a very nn-deal gas, s ths apprach wuld nt yeld a very accurate answer. The cncept f fugacty prvdes us wth an alternatve slutn. Fr a nn-deal substance, fugacty bears the same relatnshp t vlume as the pressure f an deal gas. Hence we may substtute fugacty fr pressure s that the pressure ntegral n equatn 2.131 becmes: f ' RT P df RT ' Ú = ln f ref ref where we take the reference fugacty t be 0.1 MPa. Equatn 3.47 thus becmes: P' f ' s s f ' Ú D VdP r = DV ( P' - Pref ) + Ú VH Odf = DV ( P' -Pref )ln 3.49 Pref f 2 ref fref We can then cmpute fugacty usng equatn 3.44 and the fugacty ceffcents n Table 3.1. Usng the data n Table 2.2 and slvng the temperature ntegral n 2.131 n the usual way (equatn 2.139), we calculate the DG T,P s 3.29 kj. Snce t s pstve, the left sde f the reactn,.e., bructe, we predct that bructe s stable. The DS f ths reactn s pstve, hwever, mplyng that at sme temperature, perclase plus water wll eventually replace bructe. T calculate the actual temperature f the phase bundary requres a tral and errr apprach: fr a gven pressure, we must frst guess a temperature, then lk up a value f f n Table 2.1 (nterplatng as necessary), and calculate DG r. Dependng n ur answer, we make a revsed guess f T and repeat the prcess untl DG s 0. Usng a spreadsheet, hwever, ths ges farly quckly. Usng ths methd, we calculate that bructe breaks dwn at 660 C at 200 MPa, n excellent agreement wth expermental bservatns. P' Pref P ref H O 78 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns a = X l 3.50 The ratnal actvty ceffcent dffers slghtly n defntn frm the practcal actvty ceffcent, g, used n aqueus slutns. l s defned n terms f mle fractn, whereas g s defned n terms f mles f slute per mles f slvent. Cnsder fr example the actvty f Na n an aqueus sdum chlrde slutn. Fr l Na, X s cmputed as: nna X Na = nna + ncl + nh 2O Na whereas fr g Na, X Na s: n nh 2 O where n ndcates mles f substance. In very dlute slutn, the dfference s trval. g s als used fr ther cncentratns unts that we wll ntrduce n sectn 3.7. 3.6.4 Excess Functns The deal slutn mdel prvdes a useful reference fr slutn behavr. Cmparng real slutns wth deal nes leads t the cncept f excess functns, fr example: G excess = G real - G deal 3.51 whch can be reslved nt cntrbutns f excess enthalpy and entrpy: G excess = H excess - TS excess 3.52 The excess enthalpy s a measure f the heat released durng mxng the pure end-members t frm the slutn, and the excess entrpy s a measure f all the energetc effects resultng frm a nnrandm dstrbutn f speces n slutn. We can express excess enthalpy change n the same way as excess free energy,.e.: DH excess = DH real - DH deal 3.53 But snce DH deal mxng = 0, DH excess = DH real ; n ther wrds, the enthalpy change upn mxng s the excess enthalpy change. Smlar expressns may, f curse, be wrtten fr vlume and entrpy (bearng n mnd that unlke vlume and enthalpy, DS deal s nt zer). Cmbnng equatn 3.46 wth equatn 3.50 leads t the fllwng: m m + RT ln X l 3.54 We can rewrte ths as: m m + RT ln X + RT ln l 3.55 Equatn 3.55 shws hw actvty ceffcents relate t Henry's and Rault's Laws. Cmparng equatn 3.55 wth equatn 3.39, we see that n the regn where Henry's Law hlds, that s dlute slutns, the actvty ceffcent s equal t Henry's law cnstant. In the regn where Rault's Law hlds, the actvty ceffcent s 1 and equatn 3.55 reduces t equatn 3.26 snce RT ln l = 0. Ê G ˆ Snce we knw that Á =m =m + RT ln Xl Ë n T, P, n j, jπ cmparng equatns 3.51 and 3.55, we fnd that: Ê G ˆ excess Á = RT ln l Ë n T, P, n j, jπ whch s the same as: Gexcess, = RT ln l 3.56 S that the mlar excess free energy asscated wth cmpnent s smply RT tmes the lg f the actvty ceffcent. The ttal mlar excess free energy f the slutn s then: G = RT Â X ln l 3.57 excess 79 September 26, 2001

W. M. Whte Gechemstry Chapter 3: Slutns Depressn f the Meltng Pnt In nrthern clmates such as Ithaca, NY saltng rad and sdewalks t melt snw and ce s a cmmn practce n wnter. We have nw acqured the thermdynamcs tls t shw why salt melts ce and that ths effect des nt depend n any specal prpertes f salt r water. Depressn f the meltng pnt by addtn f a secnd cmpnent t a pure substance s a general phenmenn. Suppse that we have an aqueus slutn cntanng sdum chlrde cexstng wth pure ce. If the tw phases are at equlbrum, then the chemcal ptental f water n ce must equal that f water n the slutn,.e.: ce aq m = m 3.58 H 2O H 2O (we are usng subscrpts t dente the cmpnent, and superscrpts t dente the phase; aq dentes the lqud aqueus slutn). We defne ur standard state as that f the pure substance. Accrdng t equ. 3.48, the chemcal ptental f water n the slutn can be expressed as: aq aq m = m + RT ln a 3.59 H 2O H 2O H 2O µ H 2 O dentes the chemcal ptental f pure lqud water. Substtutng 3.56 nt 3.57 and rearrangng, we have: ce aq mh O - m H O = RT ln a 2 2 l H 2O 3.60 Ice wll ncrprate very lttle salt; f we assume t s a pure phase, we may wrte 3.60 as: aq mh O - m H O = RT ln a 2 s 2 l H 2O 3.60a aq r mh O - m H O = -RT ln a 2 l 2 s H 2O 3.61 (The rder s mprtant: equatn 3.60a descrbes the freezng prcess, 3.61 the meltng prcess. These prcesses wll have equal and ppste entrpes, enthalpes, and free energes). The left hand sde f 3.61 s the Gbbs Free Energy f meltng fr pure water, whch we dente as DG m (DG m s 0 at the meltng temperature f pure water, whch we dente T m, but nn-zer at any ther temperature). We may rewrte 3.61 as: aq D G = -RT ln a 3.62 m H 2O If we assume that DH and DS are ndependent f temperature (whch s nt unreasnable ver a lmted temperature range) and we assume pressure s cnstant as well, the left hand sde f the equatn may als be wrtten as: D G = DH -TDS 3.63 m Substtutng 3.59 nt 3.58: DH -TD S = -RT ln a m m m m aq H 2O 3.64 At the meltng temperature f pure water, D G m s zer, s that: D Hm = Tm DSm Substtutng ths nt 3.60 and rearrangng: aq DS T -T RT ln a 3.65 m ( m ) =- H 2O Further rearrangement yelds: Tm R aq - 1 = - ln a H 2O T DSm Fr a reasnably dlute slutn, the actvty f water wll apprxmately equal ts mle fractn, s that: Tm R aq - 1 = - ln X H O 3.66 2 T DSm The entrpy f meltng s always pstve and snce X s always less than 1, the left hand sde f 3.66 must always be pstve. Thus the rat T m /T must always be greater than 1. S the temperature at whch an aqueus slutn wll freeze wll always be less than the meltng pnt f pure water. Saltng f rads s nt a questn f gechemcal nterest, but there are many examples f depressn f the freezng pnt f gelgcal nterest. Fr example, the freezng pnt f the cean s abut 2 C. And ths phenmenn s mprtant n gneus petrlgy, as we shall see n the next chapter. A related phenmenn f gelgcal nterest s elevatn f the blng pnt f a lqud: fr example hydrthermal slutns bl at temperatures sgnfcantly abve that f pure water. Can yu demnstrate that elevatn f the blng pnt f an deal slutn depends nly n the mle fractn f the slute? We wll see the usefulness f the cncept f excess free energy shrtly when we cnsder actvtes n electrlyte slutns. It wll als prve mprtant n ur treatment f nn-deal sld slutns and exslutn phenmena n the next chapter. 80 September 26, 2001