GBdistribution boxes and enclosures, polyester, to European Standards (ATEX) Features þ ATEXcertified þ BASEEFAcertified þ Large range of s including BARTEC, Weidmüller, Phoenix þ Different enclosure s þ External earth connection þ Extended ambient temperature range GBdistribution boxes and enclosures Description The GB box, both distribution box and empty enclosure, is manufactured of high impact resistance, glassfibre reinforced polyester SMC & DMC providing extraordinary stability and corrosion resistance. The standard enclosure consists of black, antistatic material. Other colours without antistatic characteristics are also available. All listed GB distribution boxes and empty enclosure have been tested and approved by the BASEEFA authorities according to the latest European Standards. These correspond to the requirements of the EC directive 94/9/EC (ATEX). Installation instructions The installer must make sure that the enclosure used is suitable for the corresponding field of application. This means that the material must be suitable and the required Ex protection type must correspond to the classification of the Ex area. Also the temperature class of the distribution box must meet the respective requirements. power dissipation for distribution boxes GB80 GB0 GB GB60 GB0 GB60 GB GB400/ GB400 Certification BAS98ATEX090X Empty enclosures approved for components GB9/090 GB960/6090 GB960/6090 GB9/0 GB94004/0 Certification BAS98ATEX089U BAS98ATEX089U BAS98ATEX089U Type GB80 GB0 GB GB60 GB0 GB60 GB GB400/ power dissipation at ambient temperatures of +40 C + C.80 0.90.0.0 4.00.00 7.00.0 6.80.40 9.00 4.0.00 7.0.40 0.70 +6 C 0.4 0..00.7.70..7. Distribution box Empty Exenclosure EEx edistribution boxe GB... Enclosure GB9.../... Explosion protection Ex protection type BS EN 004, BS EN 009; 994 II G EEx e II T6, II G EEx e II II G EEx e II T6, II G EEx e II EN 08; 998 BS EN 004, BS EN 009; 994 0000006/0BCSB07/E Ambient temperature ranges 0 C to +40 C 0 C to +40 C (special temperature range on request) extended ambient temperature range extended ambient temperature range C to +6 C C to +6 C Technical data Material polyester, black, antistatic, polyester glassfibre reinforced, glassfibre reinforced, surface resistance < 0 9 Ω surface resistance > 0 9 Ω flame retardant: IEC 9., UL94VO flame retardant: IEC 9., UL94VO Colour/coating polyester, black, antistatic polyester Lid screws captive slotted or hexagon socket screw, captive slotted or hexagon socket screw, (other models on request) highquality stainless steel 6 highquality stainless steel 6 Standard seals captive silicone oring in featherkey and captive silicone oring in featherkey and keyway,,arrangement, protected against the keyway, arrangement, protected against the penetration of foreign matters, penetration of foreign matters, acc. to IP 66 (IEC 609/EN 609) acc. to IP 66 (IEC 609/EN 609) Mechanical resistance acc. to EN 004 impact energy < x 7 Nm impact energy < x 7 Nm Protection class acc. to 609/IEC 609 IP 66 IP 66 Power dissipation see selection chart (without BTB) see selection chart (without BTB) Certification EC model test certification BAS98ATEX090X EC model test certification BAS98ATEX089U Accessories XE earthing studs, ES earthing studs, XE earthing studs, ES earthing studs, WB wall bracket, PB pipe bracket WB wall bracket, PB pipe bracket FB highquality steel fixing bracket FB highquality steel fixing bracket /0
GBdistribution boxes Type GB80, polyester, to European Standards (ATEX) GB80 4 number of s 6 AKZ 4 4 AKZ 4 BK ( x pole) BK ( x pole) BK 4 ( x 4pole) BK 4 ( x 4pole) BK 6 ( x 6pole) BK 6 ( x 6pole) BARTEC Mini ( x pole) BARTEC Mini ( x pole) A 0 6 4 V 7 7 40 range mm² 0. to. 0. to. AKE 4 DFG MK (pole) DFG MK (pole) DFG MK (pole) DFG range mm² 0. to 4.0 0. to 4.0 Fixing hole diameter mm. The number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. View on sides Thread Side entries Position of hole Notes per side M 0 M Locknuts max. 7 mm A/C* þ EEx e plug elements can be fitted, if required *A/C = Across Corner 0000006/0BCSB07/E Order no.: GB80 /
GBdistribution boxes Type GB0, polyester, to European Standards (ATEX) GB0 Fixing hole diameter mm. number of s 7 AKZ 4 AKZ 4 BK ( x pole) BK ( x pole) BK 4 ( x 4pole) BK 4 ( x 4pole) BK 6 ( x 6pole) BK 6 ( x 6pole) BARTEC Mini ( x polig) BARTEC Mini ( x pole) BARTEC Mini ( x pole) 6 7 7 40 0. to. 0. to. AKE 4 DFG MK (pole) DFG MK (pole) DFG MK (pole) DFG 0. to 4.0 0. to 4.0 The number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. View on sides Thread Side entries Position of hole Notes per side M 0 M M, M (or 4 m, M) Locknuts max. 7 mm A/C* þ EEx e plug elements can be fitted, if required *A/C = Across Corner 0000006/0BCSB07/E / Order no.: GB0
GBdistribution boxes Type GB, polyester, to European Standards (ATEX) Seite Seite D number of s 0 SAK. 8 SAK 4 6 SAK 6N SAK 0 WDU. 9 WDU 4 9 WDU 6 6 WDU 0 6 WDU 6 WDU BK ( x pole) BK 4 ( x 4 pole) BK 6 ( x 6pole) BK ( x pole) MK 6/6 ( x 6pole) BTB 4 ( x 4pole) BTB 6 ( x 6pole) 6 6 7 0 6 0 76 7 48 76 þ A maximum of earth bars type QS may be supplied. þ Alternative types are available. GB 0. to. 0. to 6.0. to 0.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 0. to 6.0 EK 0 WPE. WPE 0 WPE BET BET. to 0.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 0. to 6.0 0. to 6.0 4 View on sides The number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. Thread Side entries Position Notes per side of holes View on sides (viewed from side C) M 0 M M M, M U, 4L, L Not with ECP fitted and locknuts max. 7 mm A/C* M Not when strip fitted M Not when QS fitted M M, M Locknut max. 40 mm A/C* M M Entries on sides are directly opposite each other. 0000006/0BCSB07/4E View on sides F Special rear entry positions Thread Side entries per side Position of holes M 0 F 4 F, F, F, 4F þ Single M 0 entry in the lid is possible. *A/C = Across Corner Order no.: GB /
GBdistribution boxes Type GB0,polyester, to European Standards (ATEX) GB0 0000006/0BCSB07/E View on sides View on sides (viewed from side C) Entries on sides are directly opposite each other. View on sides F /4 number of s SAK. 0 SAK 4 9 SAK 6N 9 SAK 0 WDU. 9 WDU 4 0 WDU 6 7 WDU 0 7 WDU 6 4 WDU BK ( x pole) BK 4 ( x 4pole) BK 6 ( x 6pole) BK ( x pole) MK 6/6 ( x 6pole) BTB 4 ( x 4pole) BTB 4 ( x 4pole) BTB 6 ( x 6pole) BTB 6 ( x 6pole) 6 6 7 þ A maximum of earth bars type QS may be supplied. þ Alternative types are available. The number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. 0 6 0 76 7 48 76 0. to. 0. to 6.0. to 0.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 0. to 6.0* EK 0 WPE. WPE 0 WPE BET BET. to 0.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 0. to 6.0* 0. to 6.0* Thread Side entries Position Notes per side of holes M, 8M, 9M, M 0 4 M, M, 0M, M M, 6M, 7M, M, M M oder M Not when QS earth bar fitted M 4M, M M, 0M, M M 4M, M Special rear entry positions Thread Side entries per side Position of holes M 0 F 4 F, F, F, 4F þ Single M 0 entry in the lid is possible. Order no.: GB0
GBdistribution boxes Type GB60, polyester, to European Standards (ATEX) GB60 number of s SAK. 4 SAK 4 SAK 6N 8 SAK 0 7 SAK 6 7 WDU. WDU 4 WDU 6 9 WDU 0 9 WDU 6 WDU BK ( x pole) BK 4 ( x 4pole) 6 6 7 0 76 0. to. 0. to 6.0. to 0.0 6.0 to 6.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 EK 0 EK 6 WPE. WPE 0 WPE. to 0.0 6.0 to 6.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 4 BK 6 ( x 6pole) BK ( x pole) x BK 4 + x BK 7 BET 0. to 6.0* BTB 4 ( x 4pole) BTB 4 ( x 4pole) BTB 6 ( x 6pole) 76 0. to 6.0* BET 0. to 6.0* BTB 6 ( x 6pole) þ A maximum of earth bars type QS4 may be supplied. þ Alternative types are available. View on sides View on sides The maximum number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. Thread Side entries Position Note per side of holes M 0 M, 4M, M M, M Not when QS4 earth bar fitted M M M, M Not when QS4 earth bar fitted M, M M M, M Special rear entry positions Thread Side entries per side Position of holes M 0 F 4 F, F, F, 4F þ Single M 0 entry in the lid is possible also. 0000006/0BCSB07/6E View on sides F Special side entry positions Thread Side entries per side Position of holes M 0 6 U, L, su, sl, su, sl su, sl, su, sl M 0 + M 4 x M0 x M, M x M0 su, sl M 0 + M x M sm þ Single M 0 entry in the lid is possible. Order no.: GB60 /
GBdistribution boxes Type GB60,polyester, to European Standards (ATEX) GB60 number of s 7 SAK. SAK. SAK. SAK 4 8 SAK 4 0 SAK 4 SAK 6N SAK 6N 4 SAK 6N SAK 0 8 SAK 0 SAK 6 SAK 6 7 WDU. WDU 4 WDU 6 0 WDU 0 9 WDU 6 6 WDU. 6 6 0 8 6 7 0 76 0. to. 0. to 6.0. to 0.0 6.0 to 6.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 EK 0 EK 6 WPE. WPE 0 WPE. to 0.0 6.0 to 6.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 View on sides View on sides þ A maximum of earth bars type QS4 may be supplied. þ Alternative types are available. The maximum number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. Thread Side entries per side Position of holes M, M, M, 6M, 7M M 0 0 U, U, U, 6U, 7U, L, L, L, 6L, 7L M, M M, 4M, M M 4 sm, sm, 8sM, 9sM M, M M M, 4M, M 0000006/0BCSB07/7E View on sides F Special rear entry positions Thread Side entries per side Position of holes M 0 F 8 F, F, F, 4F, F, 6F, 7F, 8F M F 9F þ Single M 0 entry in the lid is possible also. Order no.: GB60 /6
GBdistribution boxes Type GB, polyester, to European Standards (ATEX) number of s Number of rails GB 4 SAK. SAK. 6 SAK. 0 SAK 4 44 SAK 4 60 SAK 4 9 SAK 6N 4 SAK 6N 48 SAK 6N 7 SAK 0 6 SAK 0 SAK 6 8 SAK N WDU. 9 WDU 4 0 WDU 6 4 WDU 0 4 WDU 6 9 WDU þ A maximum of earth connection bars type QS9 may be supplied. þ Alternative types are available.. 6 6 0 8 7 6 7 0 76 0. to. 0. to 6.0. to 0.0. to 0.0. to 0.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 EK 0 EK 6 EK WPE. WPE 0 WPE 0, bis 4,0. to 0.0 6.0 to 6.0 6.0 to.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 0000006/0BCSB07/8E View on sides View on sides The maximum number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned or fitted with a single diagonally mounted strip. Thread Side entries per side Position of holes M 0 M M M 40 M 0 M, 4M, M, 0M, M 0 U, 4U, U, 0U, U, L, 4L, L, 0L, L 4 M, M, 6M, 7M 8 U, U, 6U, 7U, L, L, 6L, 7L 4 M, M, 8M, 9M M, 6M, 7M M, 6M, 7M 4M, M M, 6M, 7M 4M, M M M Order no.: GB /7
GBdistribution boxes Type GB400, polyester, to European Standards (ATEX) GB400 number of s SAK. 74 SAK. 08 SAK. 7 SAK 4 9 SAK 4 0 SAK 4 6 SAK 6N 6 SAK 6N 84 SAK 6N SAK 0 SAK 0 0 SAK 6 9 SAK N SAK 70 WDU, 6 WDU 4 6 WDU 6 0 WDU 0 9 WDU 6 WDU Number of rails. 6 6 0 8 7 4 6 7 0 76 þ A maximum of earth bars type QS may be supplied. þ Alternative types are available. 0. to. 0. to 6.0. to 0.0 6.0 to 6.0. bis.0.0 to 70.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 EK 0 EK 6 EK WPE. WPE 0 WPE. to 0.0 6.0 to 6.0 6.0 to.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 The maximum number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned or connected with a single diagonally mounted strip. 0000006/0BCSB07/9E View on sides and sides /8 Thread Side entries per side Position of holes 8 M, M, 6M, 7M, M, M, 6M, 7M M 0 and U, U, 6U, 7U, U, U, 6U, 7U, 6 L, L, 6L, 7L, L, L, 6L, 7L M and 7 M, 4M, M, 0M, M, 6M, 7M M and M, 8M, 9M, 4M, M M 40 and M, 8M, 9M, 4M, M M M 0 and 4sM, sm oder M, 4sM oder M, sm Order no.: GB400
GBdistribution boxes, Type GB400/, polyester, to European Standards (ATEX) GB400/ 4 number of s SAK. 8 SAK 4 8 SAK 6N 6 SAK 0 SAK 6 4 SAK N WDU. 8 WDU 4 8 WDU 6 4 WDU 0 4 WDU 6 9 WDU Number of rails 6 7 6 7 0 76 range 0. to. 0. to 6.0 6.0 to 0.0 6.0 to 6.0. to.0 0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 EK 0 EK 6 EK WPE. WPE 0 WPE range 0. 4.0. 0.0 6.0 to 6.0 6.0 to.0. to.. to 4.0. to 6.0. to 0.0. to 6.0. to.0 þ A maximum of earth bars type QS9 may be supplied. þ Alternative types are available. The maximum number of s listed above depends on the maximum conductor and maximum. At least one earth must be supplied. The enclosure can be mounted with the strip horizontally or vertically aligned. 0000006/0BCSB07/0E View on sides View on sides Thread Side entries Position of holes per side 8 M, M, 6M, 7M, M, M, 6M, 7M 6 U, L, U, L, 6U, 6L, 7U, 7L, U, L, U, L,6U, 6L,7U,7L M 0 4 M, M, 6M, 7M 8 U, L, U, L, 6U, 6L, 7U, 7L M M M 40 M 0 7 M, 4M, M, 0M, M, 6M, 7M M, 8M, 9M, 4M, M M, 8M, 9M, 4M, M M M, 6M, 7M 4M, M 4M, M M Order no.: GB400/ /9