ELECTRON MICROPROBE STUDY OF KAOLIN

Similar documents
Analysis of Clays and Soils by XRD

APPENDIX F PHOTOGRAPHS OF CORE SAMPLES

Prof. B V S Viswanadham, Department of Civil Engineering, IIT Bombay

Mineralogical characterisation of gold ores: collaboration is the best technique! Dorrit de Nooy (Senior Mineralogist, Metallurgy Services)

MINERAL CONTENT AND DISTRIBUTION AS INDEXES OF WEATHERING IN THE OMEGA AND AHMEEK SOILS OF NORTHERN WISCONSIN

Copyright SOIL STRUCTURE and CLAY MINERALS

Drill Cuttings Analysis: How to Determine the Geology of a Formation and Reservoir

CERAMIC GLAZING as an IGNEOUS PROCESS

305 ATOMS, ELEMENTS, AND MINERALS

HETEROGENEITY IN MONTMORILLONITE. JAMES L. MCATEE, JR. Baroid Division, National Lead Co., Houston, Texas

Petrographic Investigation of Two Float Samples from the Goldstake Property, Northern Ontario. Prepared for: Mr. Robert Dillman

Determination of Reservoir Properties from XRF Elemental Data in the Montney Formation


Your teacher will show you a sample or diagram of each, and show you a settling column. Draw these, and label your diagrams (8 pts) Ungraded:

Sedimentary Rocks. Weathering. Mechanical & Chemical Weathering. Sediments. Lithification. Deposition. Transport. Erosion.

Minerals and Rocks Chapter 20

AER/AGS Special Report 99. QEMSCAN Analysis of Various Lithologies from Tight- and Shale-Gas Plays in Alberta

WEATHERING. Turning Rock to Sediment and Solutions 10/22/2012

1. Which mineral is mined for its iron content? A) hematite B) fluorite C) galena D) talc

SAND ANALYSIS EXERCISE

An Investigation into

Weathering and Clast Production Geol 113

Mineralogical and technological investigation of pottery and raw materials for ceramic production. Tel el Farcha, Nile Delta. Egypt.

I.S : What s in it and the role of the Geologist

GEOL.3250 Geology for Engineers Sedimentary & Metamorphic Rocks

Rocks and the Rock Cycle notes from the textbook, integrated with original contributions

Arsenic and Other Trace Elements in Groundwater in the Southern San Joaquin Valley of California

Lab: Metamorphism: minerals, rocks and plate tectonics!

GEOLOGICAL LOG INTERPRETATION TUTORIAL

Rocks. Rocks are composed of 1 or more minerals. Rocks are classified based on how they formed (origin). 3 classes of rocks:

PETROGRAPHIC MINERALOGICAL ANALYSIS OF AGGREGATES FROM DEVOLL HYDROPOWER PROJECT

Igneous Rocks. Sedimentary Rocks. Metamorphic Rocks

Emily and Megan. Earth System Science. Elements of Earth by weight. Crust Elements, by weight. Minerals. Made of atoms Earth is mostly iron, by weight

Chapter 8 Lecture. Earth: An Introduction to Physical Geology. Twelfth Edition. Metamorphism. Rocks. Tarbuck and Lutgens Pearson Education, Inc.

ENVI.2030L Rock Identification

Adsorption of Cesium Ion on Various Clay Minerals and Remediation of Cesium Contaminated Soil in Japan

305 ATOMS, ELEMENTS, AND MINERALS

LAB 2 IDENTIFYING MATERIALS FOR MAKING SOILS: ROCK AND PARENT MATERIALS

305 ATOMS, ELEMENTS, AND MINERALS

305 ATOMS, ELEMENTS, AND MINERALS

Sedimentary Geology. Strat and Sed, Ch. 1 1

Figure 1 The map shows the top view of a meandering stream as it enters a lake. At which points along the stream are erosion and deposition dominant?

A Technique for Microscopical Soil Examinations

Geology 229 Engineering Geology. Lecture 6. Basic Rock Classification and Engineering Considerations (West, Chs. 2, 3, 4, 5)

Sandstone Petrography

Rock Identification. Aphanitic Texture (fine grained) Individual crystals are so small that they are not visible to the naked eye

Page 1. Name: 1) Which diagram best shows the grain size of some common sedimentary rocks?

Metamorphism: summary in haiku form

Crust Elements. Elements of Earth. Minerals. Crystals. Interconnected Rocks and minerals Interior processes Erosion and deposition Water and air

Chapter 4. Rocks and Minerals: Documents that Record Earth's History

Solid Earth materials:

UmllluIfiW, SfOLOGICAL SURVEY

Soil Mechanics Prof. B.V.S. Viswanadham Department of Civil Engineering Indian Institute of Technology, Bombay Lecture 3

PREDICTING THE SLAGGING PROPENSITY OF SASOL-LURGI GASIFIER COAL FEEDSTOCK

Review - Unit 2 - Rocks and Minerals

T6 soil base cation weathering rates

This is how we classify minerals! Silicates and Non-Silicates

1982/20. Supplementary report on sandstones from Linden sandstone quarry, New Norfolk.

Log Interpretation Parameters Determined by Analysis of Green River Oil Shale Samples: Initial Steps

CONTENTS INTRODUCTION...2

Sedimentary Rocks and Processes

Practice Test Rocks and Minerals. Name. Page 1

Geology for Engineers Rocks

Geotechnical Engineering I CE 341

1/31/2013. Weathering Includes Physical, Chemical, Biological processes. Weathering Mechanisms. Wind abrasion forming Ventifacts

Bowen s Chemical Stability Series

300 ATOMS, ELEMENTS, AND MINERALS

It is important to recognize two distinct but overlapping uses of the term "clay":

Metamorphism (means changed form

Sedimentary Rocks. Origin, Properties and Identification. Physical Geology GEOL 100. Ray Rector - Instructor

THE USE OF PIPERIDINE AS AN AID TO CLAY-MINERAL IDENTIFICATION

CERAMIC MATERIALS I. Asst. Prof. Dr. Ayşe KALEMTAŞ

Report on samples from the Great Basin Science Sample and Records Library

Preliminary Progress Report. Mineralogy and Geochemistry of Well Cuttings. Prepared for: Gastem USA. Colgate University Department of Geology

SST3005 Fundamentals of Soil Science LAB 5 LABORATORY DETERMINATION OF SOIL TEXTURE: MECHANICAL ANALYSIS

SAMREC 2009 Table 1, Section 5.5 Treatment / Processing

- Take a notes packet from trapezoid table. - Start vocab on notes packet

Which sample best shows the physical properties normally associated with regional metamorphism? (1) A (3) C (2) B (4) D

INTERVAL SHEET. VDMfl. Well No.: Well No. lloo. Tota 1 depth,_~5,-,0",0,- Oil Gas Water~Exploratory' From-To From-To From-To

Feet. Cape May Core #51 Start depth: 240 ft Stop depth: 245 ft Recovery (ft): 5.1 ft Date: 3/21/94 Described by: JVB, KGM, CL. 5.

Speciation of Individual Mineral Particles of Micrometer Size by the Combined Use of ATR-FT-IR Imaging and Quantitative ED-EPMA Techniques

STATE OF OREGON DEPARTMENT OF GEOLOGY AND MINERAL INDUSTRIES State Office Building. Port1 and, Oregon OPEN-FILE REPORT

Earth Science Minerals. Moh s Scale of Hardness In which New York State landscape region was most of the garnet mined?

Scientific registration n : 1789 Symposium n : 4 Presentation : poster. ARINGHIERI Roberto

DIVISION OF MINERAL RESOURCES OFFICE ADDRESS, JAMES L. CALVER, COMMISSIONER

Minerals: Minerals: Building blocks of rocks. Atomic Structure of Matter. Building Blocks of Rocks Chapter 3 Outline

To get you thinking Explain how these different layers of rock formed? Why are these layers different colors? Sedimentary Rocks

EFFECTS OF DIFFERENT DISPERSING SOLUTION ON THE PROPERTIES OF SOIL PARTICLE DURING HYDROMETER TEST

University of Tennessee at Chattanooga ENCE 3610L. Overview of Rock and Soil Formation Rock Quality Designation Test

THE MULTI-TECHNIQUE APPROACH

RR#7 - Multiple Choice

Unit 2 Exam: Rocks & Minerals

A. IGNEOUS Rocks formed by cooling and hardening of hot molten rock called magma (within crust or at its surface).

Igneous Rock Classification, Processes and Identification Physical Geology GEOL 100

Chemical Variation of Feed Coal and Coal Combustion Products from an Indiana Power Plant Utilizing Low Sulfur Powder River Basin Coal

CLASSIFICATION OF MATTER AND MIXTURES

These subclasses are to be used according to the following general rules:

Scanning Electron Microscopic Study of Formation. of Gibbsite From Plagioclase

GEL 109 Midterm W05, Page points total (1 point per minute is a good pace, but it is good to have time to recheck your answers!

Transcription:

Clays and Clay Minerals, 1968, Vol. 16, pp. 187-189. PergarnonPress. Printed in Great Britain ELECTRON MICROPROBE STUDY OF KAOLIN CHARLES E. WEAVER Geophysical Sciences, Georgia Institute of Technology, Atlanta, Georgia (Received 13 October 1967) Abstract- Electron microprobe studies of kaolinite indicate that most of the Fe is evenly distributed throughout the kaolinite and must either be in the structure or occur as very small particles adsorbed on the surface. In addition to Ti the anatase impurities contain Fe and Mg. Fe, Mg, Mn, V, and K are present in biotite. It is necessary to concentrate the fine-grained mineral impurities in order to study them with the electron microprobe. INTRODUCTION THE ELECTRON microprobe X-ray analyzer has been in use since the early 1950's. Since 1960, it has been widely used in the earth sciences. Keil (1967) has published a recent review of the mineralogical applications of the electron microprobe. White et al. (1964) have demonstrated that it is possible to obtain quantitative data from microcrystalline powders when individual flakes can be isolated. The electron microprobe is ideal for the study of sand and silt size materials; however, the size of the electron beam, generally 89 limits its use for the study of clay minerals. Qualitative electron microprobe analyses were made of some kaolinite samples from Georgia to obtain some idea of how the instrument could be used to study the fine grained clay minerals. Because many minerals are electrically nonconductive, samples have to be coated with a thin film of conductive material. Carbon was used to coat most samples, but aluminum was used on a few samples so that carbon determination could be made. RESULTS Several kaolinite samples were dispersed and sedimented on a glass slide. Electron beam scanning pictures of Fe, Ti, Mg, Mn, V, K, C, (Fig. 1) show that they are evenly distributed in the areas photographed. This even distribution indicates these elements are present in the kaolinite structure or are present in other minerals which are fine grained and homogeneously distributed. The relative intensity and the absolute intensity of the Fe, Ti, and Mg patterns varied from the center to the edge of the slide suggesting that a major portion of these elements is either present in non-kaolinite minerals or is concentrated preferentially in certain kaolinite flakes. Some of the photographs were enlarged to 6" z 8" 187 and printed on transparent film so that overlay comparisons could be made. Little additional information was obtained. Samples of the same kaolinites were flocculated and sedimented slides prepared. The Fe and Ti were both homogeneously distributed. The Mg had an irregular distribution (Fig. 2) indicating that some of it was present in minerals other than those containing the bulk of the Fe and Ti. Electron beam scanning pictures of the coarse (predominantly larger than 10/z) kaolinite book fraction show that most of the Ti is present as large particles 10-25/z in dia. (Fig. 3). The Fe is homogeneously distributed though occasionally there is a slight concentration in some of the TiO2 particles. Discrete K concentration can be seen. The Mg is present in minor amounts and is evenly distributed. The K and Mg distribution indicates the K is present in muscovite rather than biotite. A concentrated suspension of 90 per cent less than 2/x fraction of kaolinite was centrifuged to produce a clay plug approximately 1.5 in. thick. The clay at the base of the plug had a yellowish color; the center was white; the upper portion gray. Electron beam scanning pictures were made of surfaces at various intervals through the plug. Scanning time was constant for each element so that relative abundance could be estimated. The pictures showing the greatest concentration of each element were assigned a value of 10 and the other pictures proportioned to them. Clay plug Element K Mg Ti Fe Mn V Surface 10 5 10 10 -- 10 Gray 10 10 8 10 10 -- White 3 4 3 7 2 -- Yellow 9 3 10 8 4 -- -- = Not determined.

188 C.E. WEAVER It is evident from these relative concentration values that the various contaminate elements, except for Fe, are not uniformly distributed. The whitest clay has a lower concentration of all the elements for which analyses were made. The yellow portion has relatively high concentration of K and Ti. The electron scan pictures of this zone show a uniform distribution for all elements. The gray zone and the surface of the plug have a high concentration of K, Mg, Ti, Fe, Mn and possibly V. The pictures of the surface of the plug (Fig. 4) indicate that the distribution of intensities for K, Mg, Ti, V, and to some extent Fe are similar, indicating that they are probably present in biotite. X-ray analyses confirmed the presence of biotite. Some of the biotite is weathered to vermiculite. The Mn is also presumably in the biotite. Why these relatively coarse biotite flakes should centrifuge out last is not known for certain but it is possible that the suspension was so concentrated that the kaolinite flocculated and settled out more rapidly than the biotite. A kaolinite sample was treated to float off the Ti and Fe impurities. Chemical analyses indicate that approximately twice as much Ti as Fe was removed by flotation. Electron probe scanning picture of the froth product reflected the relatively high Ti content of the material floated from the kaolinite. The Fe is evenly distributed. Most of the Ti is also evenly distributed but some areas of the slide have Ti concentrations 4-5/x in dia. These concentrations may not represent discrete Ti-rich grains but may be fine-grained particles adhering to the surface of the calcite grains used as a carrier in the flotation technique. When the calcite was dissolved concentrations of Ti were not observed. X-ray patterns indicate most of the Ti is present in anatase and a lesser amount in rutile. Concentrations of anatase and futile were obtained from a 90 per cent less than 2/z fraction of commercial kaolinite. The method of Raman and Jackson (1965) was used to dissolve the other minerals present. Electron micrographs show the TiOz is present as square to subsequent particles generally les's than 0.1/z in dia. The anatase grains are too small to be resolved in electron beam scanning pictures, but the pictures do show that the anatase contains appreciable amounts of Fe and Mg. This preliminary study indicates that much of the Fe, Ti, Mg, etc., in some Georgia kaolins is present in the minerals anatase, rutile, muscovite, biotite and vermiculite. Some of the Fe, and to a lesser extent Ti, is either present in the kaolinite structure or as fine particles (less than 100A) adsorbed on the surface of the clay flakes, or in both positions. A cursory electron microprobe examination of thin sections of other types of clays indicates the probe can be useful for studying the compositional variations of such included grains as dolomite, feldspar, pyrite, phosphate, etc. When several types of clay minerals are present it is difficult to obtain quantitative data due to an averaging effect; however, relative information can usually be obtained, i.e. one clay mineral is richer in iron than another. Though the electron microprobe cannot be used to study compositional variations in individual clay mineral flakes less than a few ~ in dia. considerable information can be obtained about the composition of the non-clay minerals present in clay and shale samples. In order to study compositional variations in the clay minerals and associated minerals, techniques will have to be developed to concentrate and segregate these fine-grained minerals. Acknowledgments-Thanks are extended to the Thiele Kaolin Company for supporting this study and to J. W. Johnson who made the electron microprobe photographs. REFERENCES Keil, Klaus (1967) The electron microprobe X-ray analyzer and its application in mineralogy: FortsChr. Mineral. 44, 4-66. Raman, K. V. and Jackson, M. L. (1965) Rutile and anatase determination in solis and sediments: Am. Mineralogist 50, 1086-109 I. White, E. W., Denny, P. J. and Irving S. M. (1966) Quantitative microprobe analysis of microcrystalline powders. The Electron Microprobe: The Electrochem. Soc. Syrup., Wash. D. C., 1964, pp. 791-804. John Wiley, New York. R6sum6-- Des 6tudes sur le kaolin, effectu6es par microsonde 61ectronique, indiquent que la plupart du Fe est r6parti de facon uniforme darts tout le kaolin et dolt se trouver soit dans la structure, soit en tr6s petites particules adsorb6es ~ la surface. En plus du Ti, les impuret6s d'anatase contiennent du Feet du Mg. Fe, Mg, Mn, Vet K sont pr6sents dans le biotite. I1 faut concentrer les impuret6s min6rales fines pour pouvoir les 6tudier?a la microsonde 61ectronique.

t'q ~o~ C~ g~ ' :i}i... 'ill :i :,.".':: 2 o~,.o );5:}i;';' : : [facing page 188]

- 9 k 9. ~,~" l '~'i{" Fe Fe Mg Ti Fig. 2. Electron beam scanning pictures of flocculated kaolinite. Width of field is 240 x 180t~. Fig. 3. Electron beam scanning pictures of coarse fraction of kaolinite. W i d t h of field is 300tz.

Fe Ti,o.- MB K V Fig. 4. Electron beam scanning picture of top surface of centrifuged kaolinite plug. Aggregates of fine biotite flakes were concentrated on and near the top surface of the plug. Width of field is 240 180/~.

ELECTRON MICROPROBE STUDY OF KAOLIN 189 Kurzreferat-Untersuchungen yon Kaolinit mit der Elektronenmikrosonde zeigen an, dass der Hauptteil des Fe gleichfdrmig durch den Kaolinit hindurch verteilt ist und entweder im Geftige enthalten oder in Form winziger Teilchen an der Oberfl~iche adsorbiert worden sein muss. Neben Ti enthalten die Verunreinigungen des Anatas Fe und Mg. In Biotit sind Fe, Mg, Mn, V und K gegenw~irtig. Die feink~rnigen mineralischen Verunreinigungen miissen konzentriert werden, um der Untersuchung durch die Elektronenmikrosonde zug~inglich zu sein. Pe3lOMe--Hc~ne~OBaUgfl KaO~IHTa 3JIelCTpOHHblM MHK~OBOH,ROM noka3bibalot, qto 60~Ibm~XCTBO Fe pabhomepho pacnpe~eneho no sce~ Kaorm~Ty H Haxo~rcfl B r ~rm-xe HO~IBngeTCA Kalc OqeHb Man~ie, arcop6hpobah~ble Ha HoBepXHOCTH qacthubl. KpOMe Ti ahata3obble IIpHM~H co~epxat TaIOKe Fe, H Mg. B 6HOTHTe nphcytctby~ot Fe, Mg, Mn, V H K. Menxo3epHKCTble MHHepa.nbHble 3al~13Hem~ rlphxo~[tc~[ KOHHeHTpHpoBaTb ~ng TOFO, qto6bl no~beprhytb HX HCCJIe,/H~MHIO 3JIelCTpOHHblM MHIfpO3OH,~OM.