INECTOBLEND FABS007 General Purpose ABS FABS007 is available in black color only. Further information and details are available upon request Melt Flow Rate @ 230C / 3.8kg, nominal D 1238 1.05 0.40.7 5 1.05 0.40.7 5 Tensile Strength @ Yield. 73 (23 ) Tensile Elongation @ Break. 73 (23 ) 6,000 41 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) 9,000 330,000 62 2,277 Shear Modulus. 73 (23 ) D 4065 Izod Impact, notched. 73 (23 ), 0.125 (3.2mm) Izod Impact, notched. 22 (30 ), 0.125 (3.2mm) Izod Impact, notched. 73 (23 ), 4 mm ftlb/in ftlb/in 2.5 1.2 134 64 Instrumented Impact Total Energy. 73 (23 ), 0.125 (3.2mm) ftlb 264 (1.82 ), Load 66 (0.45 ), Load 176 190 80 88 CLTE. 40 +80 ( 40 +176 ) 5.3 E5 9.5 E5 UL 94 Flame Class. 0.058 (1.47mm) UL 94 Rev. 1.02
INECTOBLEND FABSPC003 ABS/PC Blend FABSPC003 is available with internal and external lubricants, UV stabilized and other modifications. Further information and details are available upon request 0.50.8 0.10 0.50.8 0.10 Tensile Strength @ Yield. 73 (23 ) Tensile Elongation @ Break. 73 (23 ) 7,0 75 50 75 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) 11,000 275,000 76 1,898 Izod Impact, notched. 73 (23 ), 0.125 (3.2mm) Izod Impact, notched. 22 (30 ), 0.125 (3.2mm) Izod Impact, notched. 73 (23 ), 4 mm ftlb/in ftlb/in 11.0 8.0 587 427 46 Instrumented Impact Total Energy. 73 (23 ), 0.125 (3.2mm) Instrumented Impact Total Energy. 22 (30 ), 0.125 (3.2mm), ftlb ftlb 40 44 54 60 264 (1.82 ), Load 66 (0.45 ), Load 234 259 112 126 CLTE. 40 +80 ( 40 +176 ) 4.0 E5 7.2 E5 Vicat Softening Temperature, 50N ISO 306 268 131 UL 94 Flame Class. 0.058 (1.47mm) UL 94 Rev. 1.02
INECTOBLEND FPA66233 Nylon 6 6, 33 Glass Fiber Reinforced, Heat Stabilized reported DAM. Further information is available upon request Reported DAM. @ 50 RH are available upon request Mold Shrinkage, flow, 0.125 (3.2mm) Mold Shrinkage, crossflow, 0.125 (3.2mm) 1.40 1.40 Water Absorption, saturation, 73F (23C) Fiberglass Content D 2584 0.6 5.4 33 0.6 5.4 33 Tensile Modulus. 73 (23 ) Tensile Strength @ Break. 73 (23 ) Tensile Elongation @ Break. 73 (23 ) ISO 5271/2 ISO 5271/2 Psi 25,000 2 10,000 173 170 2 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) ISO 178 ISO 178 255 8,500 Izod Impact Strength, notched. 73 (23 ), 0.125 (3.2mm) Izod Impact, Strength, notched. 23, 4 mm Izod Impact Strength, notched. 30, 4 mm Charpy Impact Strength. 23, 4 mm 1/A 1/A ISO 179/1eU ftlb/in 2.0 107 10 7 70 264 (1.82 ), Load 66 (0.45 ), Load 1.82 Load, flatwise ISO 751/2 473 482 245 250 248 CLTE. 40 +35 ( 40 +95 ) 1.38 E5 2.50 E5 Melting Point ISO 3146 502 261 UL 94 Flame Class. 0.058 (1.47mm) 2.00mm +/ 0.2 mm UL 94 ISO 3795 <100 provided without any warranty or guarantee. Each user of the material should make his own test to determine the suitability of the material for his use. Therefore, it is understood and agreed that the customer assumes and hereby releases AGS Technology, Inc. from all liabilities, incurred in connection with the use of AGS products, technical assistance and information. Rev.1.23.10
INECTOBLEND FPC1 Impact Modified Grade Polycarbonate FPC1 is available with internal and external lubricants, UV stabilized and other modifications. Further information and details are available upon request Melt Flow Rate @ 300C / 1.2kg, nominal D 1238 9 0.50.8 0.15 9 0.50.8 0.15 Tensile Strength @ Yield. 73 (23 ) Tensile Elongation @ Break. 73 (23 ) 8,400 50 58 50 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) 12,500 330,000 86 2,277 Shear Modulus. 73 (23 ) D 4065 125,500 866 Izod Impact, notched. 73 (23 ), 0.125 (3.2mm) Izod Impact, notched. 22 (30 ), 0.125 (3.2mm) Izod Impact, notched. 73 (23 ), 4 mm ftlb/in ftlb/in 13.0 7.0 694 374 52 Charpy Impact, notched. 73 (23 ), 4 mm ISO 179 30 Instrumented Impact Total Energy. 73 (23 ), 0.125 (3.2mm) Instrumented Impact Total Energy. 22 (30 ), 0.125 (3.2mm), ftlb ftlb 42 46 57 63 264 (1.82 ), Load 66 (0.45 ), Load 259 275 126 135 CLTE. 40 +80 ( 40 +176 ) 4.31 E5 7.76 E5 Vicat Softening Temperature, 50N ISO 306 288 142 UL 94 Flame Class. 0.058 (1.47mm) UL 94 Rev. 1.02
INECTOBLEND FPOM110 Medium Viscosity Acetal Copolymer FPOM110 is available in black color, UV stabilized and with other modifications. Further information and details are available upon request Water Absorption. Saturation 73F (23C) Melt Flow Rate D 1238 1.41 1.8 2.2 0.9 10 1.41 1.8 2.2 0.9 10 Tensile Strength @ Yield. 73 (23 ) Tensile Elongation @ Break. 73 (23 ) 9,000 62 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) 13,500 390,000 93 2,691 Izod Impact, notched. 73 (23 ), 0.125 (3.2mm) Izod Impact, notched. 73 (23 ), 4 mm ftlb/in 59 5.0 264 (1.82 ), Load 66 (0.45 ), Load 221 3 105 160 Melting Point D 3418 325 163 CLTE. 40 to +35 (40 to +95 ) in/in/ in/in/ UL 94 Flame Class. 0.058 (1.47mm) UL 94 Rev.1.02
INECTOBLEND FPP135 Polypropylene Copolymer FPP135 is available in a variety of viscosities and other modifications. Further information and details are available upon request 0.91 1.3 2.0 0.91 1.3 2.0 Tensile Strength @ Yield. 73 (23 ) Tensile Elongation @ Yield. 73 (23 ) 3,900 6 27 6 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) 4,000 145,000 28 1,000 Izod Impact, notched. 73 (23 ), 0.125 (3.2mm) ftlb/in 2.0 107 Dart Impact. 22 (30 ), 0.125 (3.2mm) GM9300P ftlb 4.5 6.1 264 (1.82 ), Load 66 (0.45 ), Load 126 185 52 85 CLTE. +75 ( 68 +167 ) 5.5 E5 9.9 E5 Thermal Oxidative Stability. 150 D 3012 hours 350 hours 350 UL 94 Flame Class. 0.058 (1.47mm) GM UL 94 ISO 3795 < 100 < 100 Rev. 1.02
INECTOBLEND FPP330 Polypropylene Homopolymer, 30 Glass Fiber Reinforced, Heat Stabilized / Reported DAM Fiberglass Content D 2584 0.2 1.0 30 0.2 1.0 30 Tensile Strength @ Break. 73 (23 ) Tensile Elongation @ Break. 73 (23 ) Tensile Modulus. 73 (23 ) 11,000 3 980,000 76 3 5,800 Flexural Strength. 73 (23 ) Flexural Modulus. 73 (23 ) 16 740,000 110 5,100 Izod Impact Strength, notched. 73 (23 ), 0.125 (3.2mm) Izod Impact Strength, notched. 73 (23 ), 4 mm Izod Impact Strength, notched. 22 (30 ), 4 mm D 256 ftlb/in 60 6.8 4.5 Charpy Impact Strength, notched. 73 (23 ), 4 mm Charpy Impact Strength, notched. 22 (30 ), 4 mm ISO 179 ISO 179 8.0 5.0 264 (1.82 ), Load 66 (0.45 ), Load 295 312 146 155 CLTE. 30 +150 ( 22 +302 ) Flow CLTE. 30 +150 ( 22 +302 ) Cross Flow 4.4 E5 4.0 E5 7.9 7.2 UL 94 Flame Class. 0.058 (1.47mm) UL 94 ISO 3795 < 100 Rev.4.0