Cree SMD LED Model # LM1-EWN1-01-N2 Data Sheet 120-degree, 3.2 x 2.7 mm, SMT LED in white color with water-transparent lens Applications Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (T A = 25 C) Items Symbol Absolute Maximum Rating Unit Forward Current I F 25 ma Peak Forward Current Note 1 I FP 100 ma Reverse Voltage V R 5 V Power Dissipation P D 100 mw Operation Temperature T opr -40 ~ +100 C Storage Temperature T stg -40 ~ +100 C Junction Temperature T J 110 C Junction/Ambient Note 2 R THJA 450 C/W Junction/Solder Point R THJS 300 C/W Notes: 1. Pulse width 0.1 msec, duty 1/10. 2. Rth test condition: mounted on PCB FR4 (pad size 16 mm 2 ) Typical Electrical & Optical Characteristics (T A = 25 C ) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage V F I F = 20 ma V 3.4 4.0 Reverse Current I R V R = 5 V μa 10 Data Sheet: CLD-CT163.000 Luminous Flux θ V I F = 20 ma mlm 2700 Luminous Intensity I V I F = 20 ma mcd 710 1000 Chromaticity Coordinates x I F = 20 ma 0.31 y I F = 20 ma 0.32 50% Power Angle 2θ½ I F = 20 ma deg 120 Subject to change without notice.
Standard Bins for LM1-EWN1-01-N2 (I F = 20 ma) Lamps are sorted to luminous intensity (I V ) and chromaticity coordiates (x,y) bins shown. Orders for LM1-EWN1-01-N2 may be filled with any or all bins contained as below. All luminous intensity (I V ) and chromaticity coordinates (x,y) values shown and specified are at I F = 20 ma. A1 A2 B1 B2 c Luminous Intensity (I V ) 1800 mcd 1400 mcd 1120 mcd 900 mcd 710 mcd X1 or above W2 W1 V2 V1 Chromaticity Coordinates (x,y) Rank A1 A2 B1 Chromaticity Coordinates x 0.245 0.264 0.280 0.264 0.264 0.283 0.296 0.280 0.283 0.307 0.313 0.296 y 0.229 0.267 0.248 0.220 0.267 0.305 0.276 0.248 0.305 0.337 0.297 0.276 Rank B2 c Chromaticity Coordinates x 0.307 0.330 0.330 0.313 0.330 0.361 0.356 0.330 y 0.337 0.360 0.318 0.297 0.360 0.385 0.351 0.318 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the color coordinates is ±0.01. 4. Tolerance of measurement of V F is ±0.05 V. 5. Packaging methods are available for selection; please refer to the Cree LED Lamp Packaging document. 6. Please refer to the Cree LED Lamp Reliability Test Parameters document for reliability test conditions. 7. Please refer to the Cree LED Lamp Soldering & Handling document for information about how to use this LED product safely. 8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface. 2 CLD-CT163.000
CIE Chromaticity Diagram 0.90 0.80 520 530 510 540 0.70 550 560 0.60 490 570 0.50 580 Y 590 0.40 600 0.30 480 c B2 B1 A2 610 620 630 A1 0.20 0.10 470 460 0.00 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 X 3 CLD-CT163.000
Graphs 100.0 If (ma) -50-40 -30-20 Vr(V) -10 0 0.0 80.0-10.0 60.0-20.0 40.0 20.0 0.0 3.0 3.4 3.8 4.2 4.6 5.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -30.0-40.0-50.0 5.0 4.0 3.0 2.0 1.0 If(mA) 0.0 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Half Power WL=150nm 100% 75% 50% 25% 0% 400 500 600 700 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50 40 30 IF(mA) Rth j-s=300 C/W 50% Power Angle : 0 Ie(%) 100% 80% 20 60% 10 Rth j-a=450 C/W 0 T ( C) 0 20 40 60 80 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C -90-60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN 40% 20% 0% CLD-CT163.000
Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 5 CLD-CT163.000
Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the Cree LED Lamp Packaging Standard document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom V F 0: Full forward voltage distribution 1~9, A~Z... : special request * aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z... : special request * I V0: Full luminous intensity distribution 1~9, A~Z... : special request * Packing type 0: Standard = tape pack 1~9, A~Z... : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-EWN1-01-N2-00001 LM1-EWN1-01-N2-00002 Description SMD 120 White, FULL RANK, Tape & Reel SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. 6 CLD-CT163.000