RITON RT-S Mod 3 1-4x24 Illuminated Reticle Riflescope Manual

RITON RT-S Mod 3 1-4x24 Illuminated Reticle Riflescope Manual

RITON RT-S Mod 3 1-4x24IR Riflescope Thank you for choosing a quality RITON rifle scope. This manual is designed to help you get the fullest potential out of your new RITON scope and to ensure you have years of trouble free use. Made from a single piece of aircraft-grade aluminum. Your RITON RT-S Mod 3 1-4x24IR riflescope is waterproof, fogproof and the lenses are fully multi-coated. It has been tested to withstand up to 1200 G force of impact as well as being sealed with O rings and Nitrogen purged and sealed for fog and water protection. It has long eye relief, easy to use tactical adjustment knobs for elevation, windage and side parallax adjustment (on select Models). Elevation Adjustment Knob Illumination Control Knob Windage Adjustment Knob Fast Focus Eyepiece Objective Exit Pupil Magnification Adjustment Mounting Your Scope It is recommended, if you are not familiar with scope mounting, that you have a professional mount your scope. If you decide to mount it yourself, we recommend using high quality scope rings like the RITON RT-M scope rings. It is important to use rings that fit the proper tube size of the scope you are mounting.

Following the mounting instruction that are included with your scope rings. Before completely tightening the scope rings look through your RITON scope and ensure that you have proper eye relief and the reticle is level and plum. Note: Mounting the scope too far back can cause injury with the rearward recoil of the rifle. It is recommended that you initially bore sight your scope to ensure proper alignment with your rifle and to save time when zeroing your rifle at the range. Zeroing Your Scope Final sighting in of your rifle and scope should be done with live ammunition. It is recommend you shoot at a target of known distance that is comparable to the distance you plan to hunt or shoot at. Three shot groups are the best way to average and zero in your rifle. Scopes equipped with the RITON BDC reticle should zero their scopes at 100 yards for 5.56 and at 50 yards for.22 LR. Your RITON RT-S Mod 3 rifle scope feature finger-adjustable Elevation and Windage knobs and each adjustment is accompanied by an audible click. The adjustment value is clearly marked on your scope, either ¼, ½, or.1 Mil intervals. The Elevation knob is marked UP and the Windage knob is marked R. Once you have sighted in your scope you can realign your turrets to the zero position for easy reference in the future. All you need to do is unscrew the turrets with an allen wrench, being careful not to turn the turrets, pull them straight up, align the 0 on the turret with the hash mark on the scope and resecure the turret. In the future if you ever need to adjust your scope you can always quickly adjust it back to 0.

Fast Focus Eyepiece This allows you to adjust the focus so the reticle appears clear to your eyes. All RITON scopes are focused at the factory but if you need additional adjustments simply turn the fast focus eyepiece until the image you are viewing becomes clear. Variable Power Scopes To change the magnification, simply turn the magnification adjustment ring to the desired magnification level. Lower powers offer a wider field of view while higher powers offer a more focused zoomed in view. The RITON BDC reticle is designed to be the most accurate on the highest magnification setting. Side Parallax Adjustment (Select Models) Parallax is when the target and reticle are not on the same focal plane. The parallax adjustment knob allows you to adjust a movable lens inside your scope in order to eliminate any parallax aiming issues. Simply line up the estimated distance to your target with the corresponding numbers on the parallax adjustment knob. If your target distance is unknown, simply turn the parallax knob while looking through your scope until your scope is focused as sharply as possible. RITON BDC Illuminated Reticle The RITON BDC Illuminated reticle is designed to work with any 5.56 55 grain ammunition. Scopes with the RITON BDC Illuminated reticle are designed to be sighted in at 100 yards utilizing the highest magnification power setting. The corresponding hashmarks on the reticle will then represent 200, 300, 400 and 500 yard aiming point. Any aiming distance in between the set hashmarks like 350 yards the user can hold the target between the 300 and 400 yard aiming points. RITON BDC Illuminated Reticle 200 Yards 400 Yards 300 Yards 500 Yards

Illuminated Reticles Scopes equipped with an illuminated reticle have an extra knob either located on top of the eyepiece or on the side of the scope. The knob that controls the illuminated reticle has power levels between 0 (off) and 11(high). To turn on the illumination feature simply turn the knob until the illuminated part of the reticle is visible. Always store the scope with the knob set to 0 to prolong battery life. The scopes use a single CR 2032 battery for power. To access the battery compartment simply twist off the cover on the brightness adjustment knob and replace the battery with the positive side facing up. For extended storage timeframes it is recommended that you remove the battery. Illumination Control Knob and Battery Compartment