ISSUE NO : Rev: DATE OF ISSUE : 2008. 06. 12 S P E C I F I C A T I O N MODEL : SLTRGB35066B [Approved Rank : VF(S), CIE(S1, S2), IV(AAA, AAB, AAC, ABA, ABB, ABC,BAA, BAB, BAC, BBA, BBB, BBC)] RGBW TOP VIEW CUSTOMER : CUSTOMER : DRAWN CHECKED APPROVED SAMSUNG ELECTRO-MECHANICS DRAWN CHECKED APPROVED SAMSUNG ELECTRO-MECHANICS CO,.LTD. 314. MAETAN3-DONG, YEONGTONG-KU, SUWON-SI,GYUNGKI-DO,KOREA,442-743 SAMSUNG ELECTRO-MECHANICS PAGE 1/18
Contents 1. Product outline-------------------- 3 2. Absolute Maximum Rating------------ 3 3. Characteristics ------------------- 3 4. Chromaticity Diagram---------------- 5 5. Typical Characteristic Graph ----------6 6. Outline Drawing and Dimension ------- 7 7. Reliability Test Items and Conditions ---- 8 8. Solder Conditions ------------------- 9 9. Taping Dimension ------------------ 10 10. Label Structure ------------------- 11 11. Lot Number ---------------------- 11 12. Reel Packing Structure ------------- 12 13. Aluminum Vinyl Bag----------------- 13 14. Precaution for Use ----------------- 14 15. Hazard Substance Analysis------------15 16. Revision History ------------------- 18 SAMSUNG ELECTRO-MECHANICS PAGE 2/18
1. Product Outline 1) Feature. Lead Frame Type LED Package ( 5.2 * 6.0 * t 1.3mm ). Beam Angle ( θ : 120 0 ). AlGaInP, GaN/Al2O3 Chip & Long Time Reliability 2) Applications. Indoor, Outdoor Display and etc. 2. Absolute Maximum Rating Item Symbol Absolute Maximum Rating Red Green Blue Unit Forward Current IF 30 30 30 ma Pulse Forward Current IFP 100 100 100 ma Reverse Voltage Vr 5 - - V Reverse Current IR - 85 85 ma Power Disspiation PD 78 111 108 mw Operating Temperature Topr -30 85 Storage Temperature Range Tstg -40 100 -. IFP Conditions : Duty 1/10 Pulse Width 10msec 3. Characteristics Electrical properties ( Ta : 25 O C ) Item Symbol Condition Rank Color min. Typ. MAX. Unit Forward Red 1.8 2.1 2.6 Voltage VF IF = 20 ma S Green 2.9 3.2 3.7 V (*) Blue 2.9 3.2 3.6 Reverse Current IR VR= 5V - R - - 50 μa Reverse Voltage Vr IR =10mA - G, B 0.6-2.0 V Chromaticity Coordinate ( Ta : 25 O C ) Item Condition Rank Color x y Red 0.696 0.707 0.690 0.676 0.284 0.304 0.325 0.304 S1 Green 0.186 0.216 0.191 0.157 0.680 0.680 0.753 0.748 Chromaticity Blue 0.138 0.150 0.145 0.130 0.039 0.057 0.075 0.054 IF=20mA S Coordinate (*) Red 0.696 0.707 0.690 0.676 0.284 0.304 0.325 0.304 S2 Green 0.186 0.216 0.191 0.157 0.680 0.680 0.753 0.748 Blue 0.130 0.145 0.139 0.121 0.054 0.075 0.097 0.075 SAMSUNG ELECTRO-MECHANICS PAGE 3/18
Luminous Intensity ( Ta : 25 O C ) Color Item Symbo l Condition Red Green Blue Rank Value Rank Value Ran k Value Unit Luminous A 620~760 A 1200~1340 A 280~370 Intensity IV IF=20 ma B 760~925 B 1340~1630 B 370~460 mcd (*) - - - - C 460~560 * Tolerance : VF:±0.1V, IV:±5%, x,y:±0.01 * Luminous intensity measuring equipment : CAS140 B Luminous Intensity Detail Ranks Item Symbol Condition Rank Color Red Green Blue AAA 620~760 1200~1340 280~370 AAB 620~760 1200~1340 370~460 AAC 620~760 1200~1340 460~560 ABA 620~760 1340~1630 280~370 ABB 620~760 1340~1630 370~460 Luminous ABC 620~760 1340~1630 460~560 Intensity IV IF=20mA P BAA 760~925 1200~1340 280~370 (*) BAB 760~925 1200~1340 370~460 BAC 760~925 1200~1340 460~560 BBA 760~925 1340~1630 280~370 BBB 760~925 1340~1630 370~460 BBC 760~925 1340~1630 460~560 Unit mcd Approved Rank VF CIE Iv S S1. S2 AAA, AAB, AAC, ABA, ABB, ABC, BAA, BAB, BAC, BBA, BBB, BBC * Each reel contains only one of the S1 or S2, a segment (1/2) of the CIE rank. * Each reel contains only one of the AAA, AAB, AAC, ABA, ABB, ABC,BAA, BAB, BAC, BBA, BBB, or BBC a segment (1/12) of the Iv rank. SAMSUNG ELECTRO-MECHANICS PAGE 4/18
4. Chromaticity Diagram y 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 520 510 500 490 Green Blue 550 570 590 Red 610 700 0.1 470 0.0 450 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 x y Red 0.34 0.32 0.30 0.28 0.66 0.68 0.70 0.72 x Green 0.80 Blu e 0.11 0.75 0.09 y y 0.07 0.70 0.05 0.65 0.14 0.17 0.20 0.23 x 0.03 0.10 0.12 0.14 0.16 x SAMSUNG ELECTRO-MECHANICS PAGE 5/18
5. Typical Characteristics Graph Relative Luminous Intensity (%) * These graphs show typical values. 1000 100 10 1 40 Relative Luminous Intensity vs. Forward Current B G R 1 10 100 Forward Current(mA) Forward Current Derating Curve (Discrete Color) Forward Current IF(mA) ( Ta : 25 O C ) Forward Current vs. Forward Voltage 100 10 1 100 B 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage VF(V) Forward Current Derating Curve (Full Color) R G Forward Current IF(mA) 30 20 10 --- Blue, Green - - Red Forward Current IF(mA) 80 60 40 20 Relative Emission Intensity(%) 0 100 50 0 0 20 40 60 80 100 Ambient Temp(deg) SpectrumDistribution B G R 400 500 600 700 Wave Length(nm) I F T a 0 0 20 40 60 80 100 Ambient Temp(deg) Radiation Diagram = 20 ma = R.T 80 90 80 70 70 50 60 60 50 40 40 30 30 20 20 10 10 0 0 100 80 60 40 20 0 20 40 60 80 100 Relative Luminous Intensity(%) Y X Relative Luminous Intensity (%) 120 110 100 90 80 70 60 50 Relative Luminous Intensity vs. Ambient Temperature 20 40 60 80 Ambient Temperature Ta ( ) B G R Relative Forward Voltage (%) Forward Voltage vs. Ambient Temperature 110 100 90 80 70 60 50 20 40 60 80 Ambient Temperature Ta ( ) SAMSUNG ELECTRO-MECHANICS PAGE 6/18
6. LED Package Outline Dimensions Common Cathode Anode Cathode Circuit Diagram Land Pattern 6 4 3 5 2 1 NUMBER ITEM MATERIAL 1 FRAME Copper Frame(Silver Plated) 2 LED CHIP AlGaInP, GaN/Al2O3 3 Zener Diode Si 4 WIRE Gold Wire 5 RESIN Silicone + SiO2 6 PACKAGE Heat-resistant Polymer SAMSUNG ELECTRO-MECHANICS PAGE 7/18
7. Reliability Test Items and Conditions 1) Test Items and Results Test Item Room Temperature life test High Temperature humidity life test High Temperature life test Low Temperature life test Thermal Shock High Temperature Storage Low Temperature Storage High Temperature humidity Storage Temperature humidity Cycle Reflow Soldeing (Pb-Free) Test Conditions 25 ±3, Red;DC30 ma, Green;DC30 ma, Blue;DC30 ma 60 ±3, 95%±2%RH, Red;DC18 ma, Green;DC18 ma, Blue;DC18 ma 85 ±3, Red;DC9 ma, Green;DC9 ma, Blue;DC9 ma -30 ±3, Red;DC30 ma, Green;DC30 ma, Blue;DC30 ma -40 ~ 100 0.5 h 0.5 h Test Hours/Cycles Sample No 500 h 50 500 h 50 500 h 50 500 h 50 100 cycles 22 Ta=100 ±3 500 h 22 Ta=-40 ±3 500 h 22 60 ±3, 95%±2%RH 500 h 50 25 ~ 65 ~ -10 24hrs/1cycle, 95%RH Peak 260±5 for 10sec, 220 over time 60sec max 10 cycles 22 3 times 22 ESD(HBM) 5 times 5 On/Off test -R1:10MΩ, R2:1.5KΩ, C:100pF 50 ±3, 95%±2%RH, On/2sec, Off/2sec Red;DC30 ma, Green;DC30 ma, Blue;DC30 ma 120h 50 SAMSUNG ELECTRO-MECHANICS PAGE 8/18
2) Criteria for Judging the Damage Item Symbol Test Condition Limit Min Max Forward Voltage VF IF=20 ma - U.S.L.*1.2 Luminous Intensity IV IF=20 ma L.S.L.*0.5 - * USL : Upper Standard Level LSL : Lower Standard Level 8. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. Preheating: 150~180 Peak Temp. : 260±5, MAX Max.. 10sec Time above 220 : Max. 60sec Max. 60sec Max. Temp. gradient in Cooling : -5 /sec 2) For Manual Soldering Not more than 5 seconds @MAX300, under soldering iron.(one time only) SAMSUNG ELECTRO-MECHANICS PAGE 9/18
9. Taping Dimension Polarity End Start More than 40 mm Mounted with More than (100~200) mm Leading part more than Unloaded tape Flash LED Unloaded tape (200~400) mm (1) Quantity : The quantity/reel to be 1000pcs. (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2 mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a damp proof package. SAMSUNG ELECTRO-MECHANICS PAGE 10/18
10. Label Structure abcdef SS1AAA S1AAA SLTRGB35066B SS1AAA 01 IIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII GLAR94001 / 1001 / 1,000pcs IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII Rank Code N.B) Denoted rank is the only example. Rank Code a : Forward Voltage(VF) Rank (refer to page. 3) bc : Chromaticity Coordinate Rank (refer to page. 3) def : Luminous Intensity(IV) Rank (refer to page. 4) 11. Lot Number The Lot number is composed of the following characters SS1AAA S1AAA SLTRGB35066B SS1AAA 01 IIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII GLAR94001 / 1001 / 1,000pcs IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII / I / 1000PCS : Production Site (S:SEMCO, G:Gosin China) : L (LED) : Product State (A:Normality, B: Bulk, C:First Production, R:reproduction, S:Sample) : Year (Q:2006, R:2007, S:2008...) : Month (1 ~ 9, A, B) : Day (1 ~ 9, A, B ~ V) : SEMCO. Product number (1 ~ 999) : Reel Number (1 ~ 999) SAMSUNG ELECTRO-MECHANICS PAGE 11/18
12. Reel Packing Structure Reel SS1AAA S1AAA SLTRGB35066B SS1AAA 01 IIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII GLAR94001 / 1001 / 1,000pcs IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag SS1AAA S1AAA SLTRGB35066B SS1AAA 01 IIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII GLAR94001 / 1001 / 1,000pcs IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII Material : Paper(SW3B(B)) SIZE(mm) TYPE L W H 7inch 245 220 182 1 SIDE SS1AAA S1AAA SLTRGB35066B SS1AAA 01 IIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII GLAR94001 / 1001 / 10,000pcs IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII H CHIP LED W 1 [Box Label] L SAMSUNG ELECTRO-MECHANICS PAGE 12/18
13. Aluminum Vinyl Bag SS1AAA S1AAA SLTRGB35066B SS1AAA 01 IIIIIIIIIIIIIIII IIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII GLAR94001 / 1001 / 1,000pcs IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag SAMSUNG ELECTRO-MECHANICS PAGE 13/18
14. Precaution for Use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from SEMCO, they should be packed by a sealed container with nitrogen gas injected. (Shelf life of sealed bags: 12 months, temp. 0~40, 20~70%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 168 hours (7 days) at an assembly line with a condition of no more than 30 /60%RH. b. Stored at <10% RH. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >65% at 23±5. 8) Devices must be baked for 24hours at 65±5, if baking is required. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. SAMSUNG ELECTRO-MECHANICS PAGE 14/18
15. Hazard Substance Analysis SAMSUNG ELECTRO-MECHANICS PAGE 15/18
SAMSUNG ELECTRO-MECHANICS PAGE 16/18
SAMSUNG ELECTRO-MECHANICS PAGE 17/18
Revision History (Model: Model:SLTRGB35066B SLTRGB35066B) Writer Date Revision History Drawn Approved 2008.06.12 New Version S.B Yun B.M KIM SAMSUNG ELECTRO-MECHANICS PAGE 18/18