Report No. Page 1 of 11 Applicant Address HER MEI ELECTRONIC CO.,LTD NO.61,FONG TIEN RD.,FONG TIEN INDUSTRY PARK,DAH-PYI SHANE,YUNLIN COUNTY,TAIWAN,R.O.C The following sample(s) and sample information was/were submitted and identified by/on the behalf of the client No. Sample Name Material Part No. (1) 正箔 LE LT LR LZ LL ZL LS (2) 負箔 LH HS HK HG SN HT (3) 電解紙 SP LB BL HR SU SS SH (4) 铝质电解电容器端子線 NP NK BP LA HC EC (5) 電解液 HL ML HA HX LV TC (6) 迫緊 LU HH EL UA SL (7) 鋁殼 Sample Received Date Jul. 21, 2012 Testing Period Jul. 21, 2012 to Jul. 25, 2012 Test Requested Please refer to the following page(s). Test Method Please refer to the following page(s). Test Result(s) Please refer to the following page(s). Tested by Reviewed by Approved by Date Jul. 25, 2012 Danny Liu Technical Manager Centre Testing International (Shenzhen) Co., Ltd. No. 15501266 Hongwei Industrial Zone, Bao an 70 District, Shenzhen, Guangdong, China
Report No. Page 2 of 11 Test Requested As specified by client, to test Lead(Pb), Cadmium(Cd), Mercury(Hg), Hexavalent Chromium(Cr(VI)), Polybrominated Biphenyls(PBBs), Polybrominated Diphenyl Ethers(PBDEs), Fluorine(F), Chlorine(Cl), Bromine(Br), Iodine(I), Polycyclic Aromatic Hydrocarbons(PAHs), Perfluorooctane Sulfonates(PFOS), Perfluorooctanoic Acid(PFOA) in the submitted sample(s). Test Method Test Method Measured Equipment(s) MDL IEC 62321:2008 Ed.1 Sec.8 Lead (Pb) IEC 62321:2008 Ed.1 Sec.9 IEC 62321:2008 Ed.1 Sec.10 ICP-OES 2 mg/kg IEC 62321:2008 Ed.1 Sec.8 Cadmium (Cd) IEC 62321:2008 Ed.1 Sec.9 IEC 62321:2008 Ed.1 Sec.10 ICP-OES 2 mg/kg Mercury (Hg) IEC 62321:2008 Ed.1 Sec.7 ICP-OES 2 mg/kg Hexavalent Chromium (Cr(VI)) IEC 62321:2008 Ed.1 Annex B / UV-Vis IEC 62321:2008 Ed.1 Annex C 2 mg/kg Fluorine (F) Refer to BS EN 14582:2007 IC 10 mg/kg Chlorine (Cl) Refer to BS EN 14582:2007 IC 10 mg/kg Bromine (Br) Refer to BS EN 14582:2007 IC 10 mg/kg Iodine (I) Refer to BS EN 14582:2007 IC 10 mg/kg Perfluorooctane Sulfonates(PFOS) Refer to US EPA 3550C:2007 LC-MS-MS 5 mg/kg Perfluorooctanoic Acid(PFOA) Refer to US EPA 3550C:2007 LC-MS-MS 5 mg/kg Polycyclic Aromatic Hydrocarbons Refer to US EPA 3550C:2007 & US EPA (PAHs) 8270D:2007 GC-MS 0.2 mg/kg Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS 5 mg/kg Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS 5 mg/kg
Report No. Page 3 of 11 Test Result(s) (1) (2) (3) (4) Lead (Pb) Cadmium (Cd) Mercury (Hg) Hexavalent Chromium (Cr(VI)) / / / Perfluorooctanoic Acid(PFOA) Perfluorooctane Sulfonates(PFOS) (5) (6) (7) Lead (Pb) Cadmium (Cd) Mercury (Hg) Hexavalent Chromium (Cr(VI)) / Perfluorooctanoic Acid(PFOA) Perfluorooctane Sulfonates(PFOS) Conclusion (1) (2) (4) (7) Hexavalent Chromium (Cr(VI)) Negative Negative Negative Negative
Report No. Page 4 of 11 Test Result(s) (1) (2) (3) (4) Polybrominated Biphenyls(PBBs) Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Polybrominated Diphenyl Ethers(PBDEs) Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether
Report No. Page 5 of 11 Test Result(s) (5) (6) (7) Polybrominated Biphenyls(PBBs) Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Polybrominated Diphenyl Ethers(PBDEs) Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether
Report No. Page 6 of 11 Test Result(s) (3) (5) (6) Halogen(s) Fluorine (F) Chlorine (Cl) Bromine (Br) Iodine (I) Polycyclic Aromatic Hydrocarbons(PAHs) Naphthalene Acenaphthylene Acenaphthene Fluorene Phenanthrene Anthracene Fluoranthene Pyrene Chrysene Benzo[a]anthracene Benzo[b]fluoranthene Benzo[k]fluoranthene Benzo[j]fluoranthene Benzo[a]pyrene Benzo[e]pyrene Indenol[1,2,3-cd]pyrene Dibenz[a,h]anthracene Benzo[g,h,i]perylene (6) 4.6 mg/kg
Report No. Page 7 of 11 Tested Sample/Part Description (1) Gray metal foil (2) Silvery metal foil (3) Beige-white paper (4) Silvery metal pin (5) Yellow liquid (6) Black rubber (7) Silver-white metal case Note: The samples had been dissolved totally tested for Lead, Cadmium, Mercury. -MDL = Method Detection Limit - = Not Detected (<MDL) -mg/kg = ppm = parts per million Negative = Absence of Cr(VI), the detected Cr(VI) concentration in the boiling water extraction solution is less than 0.02 mg/kg with 50cm 2 sample surface area used. Test Process 1. Lead(Pb), Cadmium(Cd) (1)IEC 62321:2008 Ed.1 Sec.8 Weigh sample and place it in a microwave digestion vessel Add digestion reagent Digest sample in microwave digestion oven Analyzed by Dry Ashing/ Alkali Fusion/ Acid Dissolution Residue Filtration ICP-OES deionized water Solution (2)IEC 62321:2008 Ed.1 Sec.9 Weigh sample and place it in a conical flask Add digestion reagent Digest the sample Analyzed by Dry Ashing/ Alkali Fusion/ Acid Dissolution Residue Filtration ICP-OES deionized water Solution
Report No. Page 8 of 11 (3)IEC 62321:2008 Ed.1 Sec.10 Weigh sample and place it in a microwave digestion vessel Add digestion reagent Digest sample in microwave digestion oven Analyzed by Dry Ashing/ Alkali Fusion/ Acid Dissolution Residue Filtration ICP-OES deionized water Solution 2. Mercury(Hg) Weigh sample and place it in a microwave digestion vessel Add digestion reagent Digest sample in microwave digestion oven Analyzed by Dry Ashing/ Alkali Fusion/ Acid Dissolution Residue Filtration ICP-OES deionized water Solution 3. Hexavalent Chromium(Cr(VI)) (1) IEC 62321:2008 Ed.1 Annex B Select a test sample measuring about 50±5cm 2 Extraction with boiling water Filter and remove the sample Analyzed by UV-Vis Add test solution Adjust the ph value of the solution (2) IEC 62321:2008 Ed.1 Annex C Weigh sample and place it in a conical flask Add digestion solution Heat at 90-95 for 3 hours Add test solution Adjust the ph value of the solution Cool and filter Adjust the ph value of the solution deionized water Analyzed by UV-Vis
Report No. Page 9 of 11 4. Polybrominated Biphenyls(PBBs), Polybrominated Diphenyl Ethers(PBDEs) Weigh sample and place it in a thimble Extracted with organic solvent Concentrate the extract Analyzed by GC-MS organic solvent Transfer the extract into a volumetric flask 5. Fluorine(F), Chlorine(Cl), Bromine(Br), Iodine(I) Weigh and place sample in a sample cup of bomb Fill the bomb with oxygen Combust the sample in oxygen bomb Analyzed by IC ultra-purity water Transfer the sample solution into a volumetric flask 6. Perfluorooctanoic Acid(PFOA), Perfluorooctane Sulfonates (PFOS) Weigh sample and place it in the glass tube Extracted with organic solvent in a ultrasonic equipment Concentrate the extract Analyzed by LC-MS-MS organic solvent Transfer the extract into a volumetric flask 7. Polycyclic Aromatic Hydrocarbons(PAHs) Weigh sample and place it in a thimble Extracted with organic solvent Concentrate the extract Analyzed by GC-MS organic solvent Transfer the extract into a volumetric flask
Report No. Page 10 of 11 Photo(s) of the sample(s) (1) (2) (3) (4)
Report No. Page 11 of 11 Photo(s) of the sample(s) (5) (6) (7) *** End of Report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CTI, this report can t be reproduced except in full.