Cree XLamp CXB1507 LED Product family data sheet CLD-DS117 Rev 3A Product Description features Table of Contents www.cree.com/xlamp The XLamp CXB1507 LED Array is a member of the second generation of the CXA family that delivers up to 30% higher efficacy and up to 20% higher lumens than the first generation in the same LES. The higher performance second generation CXA LED Arrays are compatible with the first generation, providing a drop-in performance upgrade to existing CXA LED designs to shorten the luminaire design cycle and improve time to market. Available in 2 step, 3 step and 5 step EasyWhite bins and 2 step and 3 step Premium Color bins, the CXB1507 LED delivers high lumen output and high efficacy in a single, easy to use package that eliminates the need for reflow soldering, enabling lighting manufacturers to rapidly address small form factor lighting applications. The CX Family LED Design Guide provides basic information on the requirements to use the CXB1507 LED successfully in luminaire designs. 9 mm optical source Mechanical and optical design consistent with other CXA15 and CXB15 LEDs Available in 70-, 80-, 90- and 95-minimum CRI options Cree EasyWhite 2-, 3 and 5-step binning Premium Color 2- and 3-step binning Forward voltage options: 18 V class & 36 V class 85 C binning and characterization Extremely uniform color over viewing angle Top-side solder connections Thermocouple attach point NEMA SSL-3 2011 standard flux bins RoHS and REACh compliant UL recognized component (E349212) Copyright 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, XLamp and EasyWhite are registered trademarks and the Cree logo is a Characteristics...2 Operating Limits...3 Flux Characteristics, EasyWhite Order Codes and Bins - 18 V...4 Flux Characteristics, Premium Color Order Codes and Bins - 18 V...7 Flux Characteristics, EasyWhite Order Codes and Bins - 36 V...8 Flux Characteristics, Premium Color Order Codes and Bins - 36 V... 11 Relative Spectral Power Distribution, EasyWhite... 12 Relative Spectral Power Distribution, Premium Color... 13 Electrical Characteristics... 14 Relative Luminous Flux... 15 Typical Spatial Distribution... 17 Performance Groups - Brightness... 17 Performance Groups - Chromaticity... 18 Premium Color Performance Groups - Chromaticity... 19 Cree EasyWhite Bins Plotted on the 1931 CIE Curve... 20 Cree Premium Color Bins Plotted on the 1931 CIE Color Space... 21 Bin and Order Code Formats... 23 Mechanical Dimensions... 23 Thermal Design... 24 Notes... 26 Packaging... 27 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300
Characteristics Characteristics Unit Minimum Typical Maximum Viewing angle (FWHM) degrees 115 ESD withstand voltage (HBM per Mil-Std-883D) V 8000 DC forward current (18 V) ma 750* DC forward current (36 V) ma 375* Reverse current 18 V, 36 V) ma 0.1 Forward voltage (18 V, 400 ma, 85 C) V 17.3 19 Forward voltage (36 V, 200 ma, 85 C) V 34.5 38 * Refer to the Operating Limits section. 2
Operating Limits The maximum current rating of the CXB1507 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 23 for the location of the Tc measurement point. Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a maximum LES temperature of 135 C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 24 for more information on LES temperature measurement. 800 700 600 500 If (ma) 400 300 18 V 200 100 0 0 25 50 75 100 125 150 Case Temperature ( C) 400 350 300 250 If (ma) 200 150 36 V 100 50 0 0 25 50 75 100 125 150 Case Temperature ( C) 3
Flux Characteristics, EasyWhite Order Codes and Bins - 18 V (I f = 400 ma, T J = 85 C) The following table provides order codes for XLamp CXB1507 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 23). Nominal CCT 6500 K 5700 K 5000 K CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step Min Typ Group 70 --- 70 --- 70 --- 90 92 Flux (lm) @ 85 C Flux (lm) @ 25 C** J4 1120 1247 J4 1120 1247 J4 1120 1247 G4 840 935 H2 900 1002 Group Order Code Group Order Code Group Order Code 50G 50G 000F0HH450G 000F0HJ250G 000F0UG450G 000F0UH250G 000F0UH450G 65E 65E 57E 57E 50E 50E 000F0BH465E 000F0BJ265E 000F0BJ465E 000F0HH465E 000F0HJ265E 000F0BH457E 000F0BJ257E 000F0BJ457E 000F0HH457E 000F0HJ257E 000F0BH450E 000F0BJ250E 000F0BJ450E 000F0HH450E 000F0HJ250E Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 4
Flux Characteristics, EasyWhite Order Codes and Bins - 18 V (I f = 400 ma, T J = 85 C) - Continued Nominal CCT 4000 K 3500 K 3000 K CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step Min Typ Group 70 --- 90 92 90 92 90 92 Flux (lm) @ 85 C Flux (lm) @ 25 C** J4 1120 1247 H2 900 1002 G2 780 869 G4 840 935 H2 9020 1002 H2 900 1002 G2 780 869 G4 840 935 H2 9020 1002 G4 840 935 H2 900 1002 F4 730 813 G2 780 869 G4 840 935 Group Order Code Group Order Code Group Order Code 40H 40H 35H 35H 30H 30H 000F0HH240H 000F0HH440H 000F0HJ240H 000F0UG240H 000F0UG440H 000F0UH240H 000F0HH235H 000F0HH435H 000F0HJ235H 000F0UG235H 000F0UG435H 000F0UH235H 000F0HG430H 000F0HH230H 000F0HH430H 000F0UF430H 000F0UG230H 000F0UG430H 40G 40G 35G 35G 30G 30G 000F0HH240G 000F0HH440G 000F0HJ240G 000F0UG240G 000F0UG440G 000F0UH240G 000F0HH235G 000F0HH435G 000F0HJ235G 000F0UG235G 000F0UG435G 000F0UH235G 000F0HG430G 000F0HH230G 000F0HH430G 000F0UF430G 000F0UG230G 000F0UG430G 40E 000F0BH440E 000F0BJ240E 000F0BJ440E Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 5
Flux Characteristics, EasyWhite Order Codes and Bins - 18 V (I f = 400 ma, T J = 85 C) - Continued Nominal CCT 2700 K CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step Min Typ Group 90 92 Flux (lm) @ 85 C Flux (lm) @ 25 C** G4 840 935 H2 900 1002 F2 680 757 F4 730 813 G2 780 869 Group Order Code Group Order Code Group Order Code 27H 27H 000F0HG427H 000F0HH227H 000F0HH427H 000F0UF227H 000F0UF427H 000F0UG227H 27G 27G 000F0HG427G 000F0HH227G 000F0HH427G 000F0UF227G 000F0UF427G 000F0UG227G Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 6
Flux Characteristics, Premium Color Order Codes and Bins - 18 V (I f = 400 ma, T J = 85 C) Fidelity Nominal CCT CRI* Minimum Luminous Flux Typical Luminous Min Typ Group Flux (lm) Flux (lm) Flux (lm) @ 85 C @ 25 C** @ 85 C Group 2-Step Order Code 4000 K 95 98 G2 780 869 818 L5A 000F0ZG2L5A 3500 K 95 98 F4 730 813 788 35H 000F0ZF435H 3000 K 95 98 F2 680 757 757 30H 000F0ZF230H 2700 K 95 98 F2 680 757 714 27H 000F0ZF227H Specialty Nominal CCT CRI Minimum Luminous Flux Typical Luminous Min Typ Group Flux (lm) Flux (lm) Flux (lm) @ 85 C @ 25 C** @ 85 C 2-Step 3100 K 90 92 G4 840 935 870 31Q 3000 K H2 900 1002 1000 L7B 3-Step Group Order Code Group Order Code Group Order Code 000F0HH2L7B 90 92 G4 840 935 870 30Q 95 98 F2 680 757 730 L7C 000F0ZF2L7C 000F0UG431Q 000F0UG430Q 30U 000F0UG430U Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 7
Flux Characteristics, EasyWhite Order Codes and Bins - 36 V (I f = 200 ma, T J = 85 C) The following table provides order codes for XLamp CXB1507 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 23). Nominal CCT 6500 K 5700 K 5000 K CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step Min Typ Group 70 --- 70 --- 70 --- 90 92 Flux (lm) @ 85 C Flux (lm) @ 25 C** J4 1120 1247 J4 1120 1247 J4 1120 1247 G4 840 935 H2 900 1002 Group Order Code Group Order Code Group Order Code 50G 50G 000N0HH450G 000N0HJ250G 000N0UG450G 000N0UH250G 000N0UH450G 65E 65E 57E 57E 50E 50E 000N0BH465E 000N0BJ265E 000N0BJ465E 000N0HH465E 000N0HJ265E 000N0BH457E 000N0BJ257E 000N0BJ457E 000N0HH457E 000N0HJ257E 000N0BH450E 000N0BJ250E 000N0BJ450E 000N0HH450E 000N0HJ250E Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 8
Flux Characteristics, EasyWhite Order Codes and Bins - 36 V (I f = 200 ma, T J = 85 C) - Continued Nominal CCT 4000 K 3500 K 3000 K CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step Min Typ Group 70 --- 90 92 90 92 90 92 Flux (lm) @ 85 C Flux (lm) @ 25 C** J4 1120 1247 H2 900 1002 G2 780 869 G4 840 935 H2 9020 1002 H2 900 1002 G2 780 869 G4 840 935 H2 9020 1002 G4 840 935 H2 900 1002 F4 730 813 G2 780 869 G4 840 935 Group Order Code Group Order Code Group Order Code 40H 40H 35H 35H 30H 30H 000N0HH240H 000N0HH440H 000N0HJ240H 000N0UG240H 000N0UG440H 000N0UH240H 000N0HH235H 000N0HH435H 000N0HJ235H 000N0UG235H 000N0UG435H 000N0UH235H 000N0HG430H 000N0HH230H 000N0HH430H 000N0UF430H 000N0UG230H 000N0UG430H 40G 40G 35G 35G 30G 30G 000N0HH240G 000N0HH440G 000N0HJ240G 000N0UG240G 000N0UG440G 000N0UH240G 000N0HH235G 000N0HH435G 000N0HJ235G 000N0UG235G 000N0UG435G 000N0UH235G 000N0HG430G 000N0HH230G 000N0HH430G 000N0UF430G 000N0UG230G 000N0UG430G 40E 000N0BH440E 000N0BJ240E 000N0BJ440E Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 9
Flux Characteristics, EasyWhite Order Codes and Bins - 36 V (I f = 200 ma, T J = 85 C) - Continued Nominal CCT 2700 K CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step Min Typ Group 90 92 Flux (lm) @ 85 C Flux (lm) @ 25 C** G4 840 935 H2 900 1002 F2 680 757 F4 730 813 G2 780 869 Group Order Code Group Order Code Group Order Code 27H 27H 000N0HG427H 000N0HH227H 000N0HH427H 000N0UF227H 000N0UF427H 000N0UG227H 27G 27G 000N0HG427G 000N0HH227G 000N0HH427G 000N0UF227G 000N0UF427G 000N0UG227G Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 10
Flux Characteristics, Premium Color Order Codes and Bins - 36 V (I f = 200 ma, T J = 85 C) Fidelity Nominal CCT CRI* Minimum Luminous Flux Typical Luminous Min Typ Group Flux (lm) Flux (lm) Flux (lm) @ 85 C @ 25 C** @ 85 C Group 2-Step Order Code 4000 K 95 98 G2 780 869 818 L5A 000N0ZG2L5A 3500 K 95 98 F4 730 813 788 35H 000N0ZF435H 3000 K 95 98 F2 680 757 757 30H 000N0ZF230H 2700 K 95 98 F2 680 757 714 27H 000N0ZF227H Specialty Nominal CCT CRI Minimum Luminous Flux Typical Luminous Min Typ Group Flux (lm) Flux (lm) Flux (lm) @ 85 C @ 25 C** @ 85 C 2-Step 3100 K 90 92 G4 840 935 870 31Q 3000 K H2 900 1002 1000 L7B 3-Step Group Order Code Group Order Code Group Order Code 000N0HH2L7B 90 92 G4 840 935 870 30Q 95 98 F2 680 757 730 L7C 000N0ZF2L7C 000N0UG431Q 000N0UG430Q 30U 000N0UG430U Notes Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). Cree XLamp CXB1507 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 C are calculated and for reference only. 11
Relative Spectral Power Distribution, EasyWhite The following graph is the result of a series of pulsed measurements at 400 ma for the 18-V CXB1507 LED and 200 ma for the 36-V CXB1507 LED and T J = 85 C. 100% 90% Relative Spectral Power 80% 70% 60% 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) 5000 K, 70 CRI 4000 K, 70 CRI 3000 K, 80 CRI 3000 K, 90 CRI 12
Relative Spectral Power Distribution, Premium Color The following graphs are the result of a series of pulsed measurements at 400 ma for the 18-V CXB1507 LED and 200 ma for the 36-V CXB1507 LED and T J = 85 C. Fidelity 100% 90% Relative Spectral Power 80% 70% 60% 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) 4000 K, Z CRI 3500 K, Z CRI 3000 K, Z CRI 2700 K, Z CRI Specialty Relative Spectral Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) 31Q, 3100 K, 90 CRI 30Q, 3000 K, 90 CRI L7B, 3000 K 80 CRI L7C, 3000 K, Z CRI 13
Electrical Characteristics The following graphs are the result of a series of steady-state measurements. 19.0 18 V 18.5 Voltage (V) 18.0 17.5 17.0 Tc = 25 C Tc = 55 C Tc = 85 C Tc = 105 C 16.5 16.0 200 250 300 350 400 450 500 550 600 650 700 750 Current (ma) 38 36 V 37 Voltage (V) 36 35 34 Tc = 25 C Tc = 55 C Tc = 85 C Tc = 105 C 33 32 100 125 150 175 200 225 250 275 300 325 350 375 Current (ma) 14
Relative Luminous Flux The relative luminous flux values provided below are the ratio of measurements of the CXB1507 LED at steady-state operation at the given conditions, divided by flux measured during binning, which is a pulsed measurement at 400 ma at T J = 85 C for the 18-V CXB1507 LED. Using the 18-V CXB1507 LED as an example, at steady-state operation of Tc = 105 C, I F = 550 ma, the relative luminous flux ratio is 120% in the chart below. A CXB1507 LED that measures 900 lm during binning will deliver 1080 lm (900 * 1.2) at steady-state operation of Tc = 105 C, I F = 550 ma. 200% 180% 18 V Relative Luminous Flux 160% 140% 120% 100% 80% 60% 40% Tc = 25 C Tc = 55 C Tc = 85 C Tc = 105 C 20% 0% 200 250 300 350 400 450 500 550 600 650 700 750 Current (ma) 15
Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of measurements of the CXB1507 LED at steady-state operation at the given conditions, divided by flux measured during binning, which is a pulsed measurement at 200 ma at T J = 85 C for the 36-V CXB1507 LED. Using the 36-V CXB1507 LED as an example, at steady-state operation of Tc = 105 C, I F = 275 ma, the relative luminous flux ratio is 120% in the chart below. A CXB1507 LED that measures 900 lm during binning will deliver 1080 lm (900 * 1.2) at steady-state operation of Tc = 105 C, I F = 275 ma. 200% 180% 36 V Relative Luminous Flux 160% 140% 120% 100% 80% 60% 40% Tc = 25 C Tc = 55 C Tc = 85 C Tc = 105 C 20% 0% 100 125 150 175 200 225 250 275 300 325 350 375 Current (ma) 16
Typical Spatial Distribution 100% Relative Luminous Intensity 80% 60% 40% 20% 0% -90-70 -50-30 -10 10 30 50 70 90 Angle (º) Performance Groups - Brightness (18 V, I f = 400 ma; 36 V, I f = 200 ma, T j = 85 C) XLamp CXB1507 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 17
Performance Groups - Chromaticity (T j = 85 C) XLamp CXB1507 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures 2-Step Code CCT x y 0.3777 0.3739 40H 35H 30H 27H 4000 K 3500 K 3000 K 2700 K 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Bin Code CCT EasyWhite Color Temperatures 3-Step Ellipse Center Point Major Axis Minor Axis Rotation Angle ( ) x y a b 50G 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 40G 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 EasyWhite Color Temperatures 5-Step Ellipse Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle ( ) x y a b 65E 6500 K 0.3123 0.3282 0.01110 0.00550 61.0 57E 5700 K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000 K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 18
Premium Color Performance Groups - Chromaticity (T j = 85 C) XLamp CXB1507 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. Fidelity EasyWhite Color Temperatures 2-Step Code CCT x y 0.3764 0.3711 0.3784 0.3787 L5A 4000 K 0.3847 0.3826 0.3825 0.3748 0.4022 0.3858 0.4053 0.3942 35H 3500 K 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 30H 3000 K 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 27H 2700 K 0.4633 0.4154 0.4581 0.4062 Specialty EasyWhite Color Temperatures 2-Step Code CCT x y 0.4263 0.3848 0.4296 0.3916 L7B 3000 K 0.4361 0.3938 0.4326 0.3868 0.4192 0.3754 0.4224 0.3823 L7C 3000 K 0.4291 0.3847 0.4257 0.3777 Bin Code CCT EasyWhite Color Temperatures 3-Step Ellipse Center Point Major Axis Minor Axis Rotation Angle ( ) x y a b 31Q 3100 K 0.4236 0.3888 0.00848 0.00455 50.3 30Q 3000 K 0.4305 0.3935 0.00834 0.00408 53.2 19
Cree EasyWhite Bins Plotted on the 1931 CIE Curve 0.44 0.43 ANSI C78.377 Quadrangle EasyWhite 5-step 3000 K 2700 K 0.42 0.41 0.40 EasyWhite 3-step EasyWhite 2-step 4500 K 4000 K 3500 K 0.39 0.38 5000 K 0.37 5700 K 0.36 0.35 6500 K 0.34 0.33 0.32 0.31 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 CCy CCx 20
Cree Premium Color Bins Plotted on the 1931 CIE Color Space (T j = 85 C) Fidelity (2-step) 0.44 0.43 ANSI C78.377 Quadrangle 3000K 2700K 0.42 3500K 0.41 0.40 4500K 4000K 30H 27H CCy 0.39 35H 0.38 L5A 0.37 0.36 0.35 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 CCx 0.42 0.43 0.44 0.45 0.46 0.47 0.48 21
Cree Premium Color Bins Plotted on the 1931 CIE Color Space (T j = 85 C) - Continued Speciality (2-step) 0.44 ANSI C78.377 Quadrangle 0.43 3000 K 0.42 3500 K 0.41 0.40 0.39 L7B 0.38 L7C 0.37 0.41 0.42 0.43 CCx 0.44 0.45 0.46 Speciality (3-step) 0.44 ANSI C78.377 Quadrangle 0.43 3000K 0.42 3500K 0.41 CCy 0.40 30Q 0.39 31Q 0.38 30U 0.37 0.41 0.42 0.43 CCx 0.44 0.45 0.46 22
Bin and Order Code Formats Bin codes and order codes are configured as follows: Order Code Series = CXB15 Internal code Bin Code Series = CXB15 Chromaticity bin SSSSSCC-HHHH-HHHGGNNNNNN CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum Kit code Vf class: F0 = 18-V class N0 = 36-V class Performance class SSSSSCC-WWW-FF-GGR-AAAAA Vf class: F0 = 18-V class N0 = 36-V class Internal code CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum Flux bin Performance class Mechanical Dimensions Dimensions are in mm. Tolerances unless otherwise specified: +.13 x +1 Meaning of B1507X B1507F = 18 V CXB1507 B1507N = 36 V CXB1507 B1507X 23
Thermal Design The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (T J ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum T J calculations with maximum ratings based on forward current (I F ) and case temperature (Tc). No additional calculations are required to ensure that the CXB LED is being operated within its designed limits. LES temperature measurement provides additional verification of good thermal design. Please refer to page 3 for the Operating Limit specifications. There is no need to calculate for T J inside the package, as the thermal management design process, specifically from T SP to ambient (T a ), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials (TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully in luminaire designs. To keep the CXB1507 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following graphs, depending on the operating environment. The y axis in the graphs is a base 10 logarithmic scale. As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) plus the thermal resistance of the heat sink (R_hs). R_j-c Tc R_tim R_j-c Tc R_c-a 100.00 R_hs Ta Ta 10.00 18 V Maximum R_c-a 1.00 0.10 Ta = 25 C Ta = 55 C Ta = 85 C Ta = 105 C 0.01 200 250 300 350 400 450 500 550 600 650 700 750 Current (ma) 24
Thermal Design - Continued 100.00 10.00 36 V Maximum R_c-a 1.00 0.10 Ta = 25 C Ta = 55 C Ta = 85 C Ta = 105 C 0.01 100 125 150 175 200 225 250 275 300 325 350 375 Current (ma) 25
Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. Pre Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. 26
Packaging Cree CXB1507 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. Dimensions are in inches. Tolerances: +13 x +1 5 4 3 2 5.875 R.375 1 SENT 6 5 4 3 2 1 NOTICE IDENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND IAL INFORMATION OF CREE, INC. THIS PLOT COPIED, REPRODUCED OR DISCLOSED 5.875 TO ANY ZED PERSON WITHOUT THE WRITTEN CONSENT. R.375.875 5.875 5.875 R.375.875.875 5.875 LABEL WITH CREE BIN CODE, QUANTITY, LOT #.875.38 PATENT LABEL IS LOCATED PATENT ON UNDERSIDE LABEL IS OF LOCATED COVER ON UNDERSIDE OF CARTON TH CREE BIN NTITY, LOT # LABEL WITH.875 CREE BIN CODE, QTY, LOT# PATENT LABEL L IS LOCATED IS LOCATED ON UNDERSIDE OF DE OF COVER CARTON.875.38.38 BAG BAG LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT# LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT# UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED:.X ± 0.1 APPROVED DATE.XX ±.05 TITLE.XXX ± THIRD ANGLE PROJECTION DRAWN.005BY DATE UNLESS OTHERWISE SPECIFIED X ± 1 MATERIAL CXA15XX_DATASHEET WITH CREE BIN 4600 Silicon Drive DIMENSIONS ARE FOR IN SHEET METAL PARTS ONLY Durham, N.C 27703 CHECK DATE SIZE DRAWING NO. UANTITY, LOT # MILLIMETERS & BEFORE FINISH. Copyright 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, XLamp.X ±.06 and EasyWhite Phone (919) 361-4770 are FINAL registered PROTECTIVE FINISH TOLERANCE UNLESS SPECIFIED:.XX ±.03 trademarks and Cthe Cree CXA15XX_DATASHEET_BAG2013 logo is a trademark of Cree, Inc. UL Fax (919) 313-5303 and the UR logo are registered trademarks of UL LLC..X ± 0.1.XXX ± APPROVED.010 DATE SCALE SHEET OF X ± 2 TITLE 0.500.XX ±.05 6 5 4 3.XXX ±.005 2 1 THIRD ANGLE PROJECTION X ± 1 MATERIAL CXA15XX_DATASHEET FOR SHEET METAL PARTS ONLY.X ±.06 FINAL PROTECTIVE FINISH DRAWN BY CHECK DATE DATE SIZE DRAWING NO. 27 CXA15XX_DATASHEET_BAG2013 4600 Silicon Dri Durham, N.C 27 Phone (919) 361 Fax (919) 313-5