MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Similar documents
Oscillations. PHYS 101 Previous Exam Problems CHAPTER. Simple harmonic motion Mass-spring system Energy in SHM Pendulums

Chapter 14: Periodic motion

Practice Test SHM with Answers

Chapter 12 Vibrations and Waves Simple Harmonic Motion page

8. What is the period of a pendulum consisting of a 6-kg object oscillating on a 4-m string?

Chapter 12. Recall that when a spring is stretched a distance x, it will pull back with a force given by: F = -kx

AP Physics. Harmonic Motion. Multiple Choice. Test E

Chapter 14 Oscillations. Copyright 2009 Pearson Education, Inc.

Simple Harmonic Motion Practice Problems PSI AP Physics B

Chapter 13, Vibrations and Waves. 1. A large spring requires a force of 150 N to compress it only m. What is the spring constant of the spring?

AP Physics Free Response Practice Oscillations

Oscillations. Oscillations and Simple Harmonic Motion

PHYS 1303 Final Exam Example Questions

Good Vibes: Introduction to Oscillations

PHYS 1303 Final Exam Example Questions

Essential Physics I. Lecture 9:

CHAPTER 11 TEST REVIEW

Physics Mechanics. Lecture 32 Oscillations II

Name Lesson 7. Homework Work and Energy Problem Solving Outcomes

Summer Physics 41 Pretest. Shorty Shorts (2 pts ea): Circle the best answer. Show work if a calculation is required.

Physics 161 Lecture 17 Simple Harmonic Motion. October 30, 2018

4 A mass-spring oscillating system undergoes SHM with a period T. What is the period of the system if the amplitude is doubled?

11. (7 points: Choose up to 3 answers) What is the tension,!, in the string? a.! = 0.10 N b.! = 0.21 N c.! = 0.29 N d.! = N e.! = 0.

Phys101 Second Major-173 Zero Version Coordinator: Dr. M. Al-Kuhaili Thursday, August 02, 2018 Page: 1. = 159 kw

PHY218 SPRING 2016 Review for Final Exam: Week 14 Final Review: Chapters 1-11, 13-14

AP physics B - Webreview ch 13 Waves

Page kg kg kg kg (Total 1 mark) Q4. The diagram shows two positions, X and Y, o the Ea th s su fa e.

The maximum kinetic energy is directly proportional to the frequency. The time for one oscillation is directly proportional to the frequency.

End-of-Chapter Exercises

Q1. Which of the following is the correct combination of dimensions for energy?

PROBLEM 2 10 points. [ ] increases [ ] decreases [ ] stays the same. Briefly justify your answer:

PHYSICS 1 Simple Harmonic Motion

Name: AP Homework 9.1. Simple Harmonic Motion. Date: Class Period:

Simple Harmonic Motion Practice Problems PSI AP Physics 1

Use the following to answer question 1:

1 MR SAMPLE EXAM 3 FALL 2013

EXAM 3 MECHANICS 40% of the final grade

Chapter 15. Oscillations

PHYSICS B SAMPLE EXAM I Time - 90 minutes 70 Questions

Simple Harmonic Motion

AP Physics 1 Multiple Choice Questions - Chapter 9

C. points X and Y only. D. points O, X and Y only. (Total 1 mark)

Physics for Scientists and Engineers 4th Edition, 2017

Old Exams Questions Ch. 8 T072 Q2.: Q5. Q7.

Physics 41 HW Set 1 Chapter 15 Serway 8 th ( 7 th )

( ) Physics 201, Final Exam, Fall 2006 PRACTICE EXAMINATION Answer Key. The next three problems refer to the following situation:

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Lectures Chapter 10 (Cutnell & Johnson, Physics 7 th edition)

A 2.42 kg ball is attached to an unknown spring and allowed to oscillate. The figure shows a graph of the ball's position x as a function of time t.

Unit 7: Oscillations

A) 4.0 m/s B) 5.0 m/s C) 0 m/s D) 3.0 m/s E) 2.0 m/s. Ans: Q2.

AP Physics C 1984 Multiple Choice Questions Mechanics

Chapter 14 Oscillations

As the mass travels along the track, the maximum height it will reach above point E will be closest to A) 10. m B) 20. m C) 30. m D) 40.

Periodic Motion. Periodic motion is motion of an object that. regularly repeats

PHYSICS. Chapter 15 Lecture FOR SCIENTISTS AND ENGINEERS A STRATEGIC APPROACH 4/E RANDALL D. KNIGHT Pearson Education, Inc.

Chapter 14 Oscillations. Copyright 2009 Pearson Education, Inc.

Pre-AP Physics Review Problems

PHY 2048 Final Exam Review DISCLAIMER - I am a student and there could potentially be errors in the solutions.

Good Vibes: Introduction to Oscillations

4) Vector = and vector = What is vector = +? A) B) C) D) E)

16.07 Dynamics Final Exam

AP Physics 1 Waves and Simple Harmonic Motion Practice Test

Quantitative Skills in AP Physics 1

TOPIC E: OSCILLATIONS EXAMPLES SPRING Q1. Find general solutions for the following differential equations:

Chapter 14 Oscillations

Mass on a Horizontal Spring

Oscillatory Motion and Wave Motion

PHYSICS - CLUTCH CH 15: PERIODIC MOTION (NEW)

Rotation. PHYS 101 Previous Exam Problems CHAPTER

You may use your books and notes. Moreover, you are encouraged to freely discuss the questions..which doesn't mean copying answers.

is acting on a body of mass m = 3.0 kg and changes its velocity from an initial

PY205N Spring The vectors a, b, and c. are related by c = a b. The diagram below that best illustrates this relationship is (a) I

AHL 9.1 Energy transformation

r r Sample Final questions for PS 150

Simple Harmonic Motion Test Tuesday 11/7

Chapter 5 Oscillatory Motion

!T = 2# T = 2! " The velocity and acceleration of the object are found by taking the first and second derivative of the position:

Chapter 14 Periodic Motion

(A) 10 m (B) 20 m (C) 25 m (D) 30 m (E) 40 m

P211 Spring 2004 Form A

Phys 270 Final Exam. Figure 1: Question 1

6. Find the net torque on the wheel in Figure about the axle through O if a = 10.0 cm and b = 25.0 cm.

AAPT UNITED STATES PHYSICS TEAM AIP 2015

Oscillations - AP Physics B 1984

5. A car moves with a constant speed in a clockwise direction around a circular path of radius r, as represented in the diagram above.

UNIVERSITY OF MANITOBA. All questions are of equal value. Answer all questions. No marks are subtracted for wrong answers.

Sample Final Exam 02 Physics 106 (Answers on last page)

Show all work in answering the following questions. Partial credit may be given for problems involving calculations.

Potential Energy & Conservation of Energy

NAME NUMBER SEC. PHYCS 101 SUMMER 2001/2002 FINAL EXAME:24/8/2002. PART(I) 25% PART(II) 15% PART(III)/Lab 8% ( ) 2 Q2 Q3 Total 40%

CHAPTER 8: ROTATIONAL OF RIGID BODY PHYSICS. 1. Define Torque

Solution Derivations for Capa #12

Chapter 13. Simple Harmonic Motion

WAVES & SIMPLE HARMONIC MOTION

not to be republished NCERT OSCILLATIONS Chapter Fourteen MCQ I π y = 3 cos 2ωt The displacement of a particle is represented by the equation

No Brain Too Small PHYSICS

Page 1. Name:

1. Dimensions of force constant are (MHT-CET-2003) (a) M 1 L 0 T 2 (b) M 1 L 0 T 2. (c) M 0 L 1 T 2 (d) MLT 2

RELEASED. Go to next page. 2. The graph shows the acceleration of a car over time.

Transcription:

Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A 4.8-kg block attached to a spring executes simple harmonic motion on a frictionless horizontal surface. At time t = 0 s, the block has a displacement of -0.50 m, a velocity of -0.80 m/s, and an acceleration of +8.3 m/s 2. The force constant of the spring is closest to: A) 56 N/m B) 62 N/m C) 73 N/m D) 80 N/m E) 67 N/m 2) A 3.4-kg block attached to a spring executes simple harmonic motion on a frictionless horizontal surface. At time t = 0 s, the block has a displacement of -0.50 m, a velocity of -0.80 m/s, and an acceleration of +3.8 m/s 2. The amplitude of the motion is closest to: A) 0.80 m B) 3.8 m C) 0.88 m D) 0.58 m E) 0.72 m 3) A 1.5-kg block on a horizontal frictionless surface is attached to a spring whose force constant is 220 N/m. The block is pulled from its equilibrium position at x = 0 m to a displacement the x-axis (horizontal). The displacement of the block at time t = 0.70 s is closest to: A) 0.07 m B) -0.5 m C) 0.04 m D) -0.04 m E) -0.07 m 1) 2) 3) 4) A 1.6-kg block on a horizontal frictionless surface is attached to a spring whose force constant is 190 N/m. The block is pulled from its equilibrium position at x = 0 m to a displacement the x-axis (horizontal). The velocity of the block at time t = 0.40 s is closest to: A) -0.8 m/s B) -0.3 m/s C) 0.8 m/s D) 0.3 m/s E) zero 4) 5) A 0.13-kg block on a horizontal frictionless surface is attached to a spring whose force constant is 500 N/m. The block is pulled from its equilibrium position at x = 0 m to a displacement the x-axis (horizontal). When the displacement is x = 0.018 m, the kinetic energy of the block is closest to: A) 1.5 J B) 1.4 J C) 1.7 J D) 1.8 J E) 1.6 J 5) 6) A 0.028-kg block on a horizontal frictionless surface is attached to a spring whose force constant is 170 N/m. The block is pulled from its equilibrium position at x = 0 m to a displacement the x-axis (horizontal). When the displacement is x = -0.054 m, the acceleration of the block is closest to: A) 250 m/s 2 B) 970 m/s 2 C) 160 m/s 2 D) 820 m/s 2 E) 330 m/s 2 6) 7) A 0.068-kg block on a horizontal frictionless surface is attached to a spring whose force constant is 390 N/m. The block is pulled from its equilibrium position at x = 0 m to a displacement the x-axis (horizontal). The maximum elastic potential energy of the system is closest to: A) 1.1 J B) 1.2 J C) 1.4 J D) 1.5 J E) 1.6 J 7) 1

Figure 13.1 8) In Fig. 13.1, two masses, M = 10 kg and m = 8 kg, are attached to a spring of spring constant 100 N/m. The system is set into oscillation with an amplitude of 58 cm. At the instant when the acceleration is at maximum, the 10-kg mass separates from the 8-kg mass, which then remains attached to the spring and continues to oscillate. The amplitude of oscillation of the 8-kg mass will be: A) 46 cm B) 58 cm C) 130 cm D) 73 cm E) 26 cm 8) 9) For an object undergoing simple harmonic motion, A) the acceleration is greatest when the speed is greatest. B) the acceleration is greatest when the displacement is greatest. C) the displacement is greatest when the speed is greatest. D) the total energy oscillates at frequency f = 1 2π k m. E) the maximum potential energy is larger than the maximum kinetic energy. 10) A particle is in simple harmonic motion along the x-axis with a period of 1.4 s and an amplitude of 0.78 m. The equilibrium position of the particle is at x = 0. At time t = 0, the particle is at x = +0.47 m and it is moving in the negative x-direction. The magnitude of the velocity of the particle, at time t = 0 s, is closest to: A) 2.8 m/s B) 4.6 m/s C) 4.1 m/s D) 5.5 m/s E) 3.5 m/s 9) 10) 11) A particle is in simple harmonic motion along the x-axis with a period of 7.7 s and an amplitude of 0.51 m. The equilibrium position of the particle is at x = 0. At time t = 0, the particle is at x = +0.36 m and it is moving in the negative x-direction. The x-component of the acceleration, at time t = 0, is closest to: A) -0.34 B) 0.34 C) -0.24 D) 0.24 E) zero 11) 12) A particle is in simple harmonic motion along the x-axis with a period of 3.7 s and an amplitude of 0.64 m. The equilibrium position of the particle is at x = 0. At time t = 0, the particle is at x = +0.38 m and it is moving in the negative x-direction. The time interval required for the particle to reach x = - 0.64 m from its initial position at t = 0 s is closest to: A) 2.6 s B) 1.3 s C) 2.0 s D) 2.3 s E) 1.6 s 12) 13) A particle is in simple harmonic motion along the x-axis with a period of 3.5 s and an amplitude of 0.32 m. The equilibrium position of the particle is at x = 0. At time t = 0, the particle is at x = +0.26 m and it is moving in the negative x-direction. At time t = 0, the ratio of the potential energy to the total mechanical energy is closest to: A) 0.72 B) 0.64 C) 0.80 D) 1.1 E) 1.4 13) 2

Situation 13.1 A 0.90-kg solid disk has a radius of 10 cm and a thickness of 1.0 cm. The disk is used as a balance wheel in a mechanism and the torsion constant is 0.020 N m/rad. 14) In Situation 13.1, the period of oscillation of the wheel is closest to: A) 4.2 s B) 1.5 s C) 2.1 s D) 3.0 s E) 1.1 s 14) 15) In Situation 13.1, the torque required to hold the wheel at a 90 angular displacement from equilibrium is closest to: A) 0.05 N m B) 0.01 N m C) 0.04 N m D) 0.03 N m E) 0.02 N m 15) Figure 13.2 16) In Fig. 13.2, a mass of 2 kg is attached to three springs of spring constants 1 N/m, 2 N/m, and 3 N/m. When the mass is at rest the springs are unstretched. For this system: A)! 2 = 3/2 rad/s 2 B)! 2 = 1 rad/s 2 C)! 2 = 1/2 rad/s 2 D)! 2 = 3 rad/s 2 E)! 2 = 2 rad/s 2 16) 17) It has been suggested that a possible transportation system to connect two cities such as Boston and Washington, D.C., might function like this: Drill a tunnel straight from Boston to Washington. A car released in Boston would fall under the influence of gravity, gaining speed, and then finally coasting back to the surface at Washington. The only expenditure of energy required would be that to overcome friction, and this could be reduced by using an evacuated tunnel or magnetic levitation of the train or other possible techniques. Assuming the density of the earth is constant (it isn't), and using only the value of the acceleration of gravity at the earth's surface (9.8 m/s 2 ) and the radius of the earth (6380 km) determine how long it would take to travel between any two cities via a straight tunnel. The result, rather surprisingly, is about: A) 58 minutes B) 42 minutes C) 1 hour 23 minutes D) 2 hours 54 minutes E) 6 hours 33 minutes 17) 3

Situation 13.2 The x-component of the velocity of an object vibrating along the x-axis obeys the equation v x (t) = (0.445 m/s) sin[(25.4 rad/s)t + 0.223]. 18) In Situation 13.2, the amplitude of the motion is closest to: A) 0.445 m B) 0.223 m C) 0.0175 m D) 0.247 m E) 25.4 m 18) 19) In Situation 13.2, the maximum acceleration of the vibrating object is closest to: A) 287 m/s 2 B) 0.286 m/s 2 C) 25.4 m/s 2 D) 0.445 m/s 2 E) 11.3 m/s 2 19) Situation 13.3 The angle with the vertical of a swinging simple pendulum obeys the equation!(t) = (0.150 rad) cos[(2.85 rad/s)t + 1.66]. 20) In Situation 13.3, the length of the pendulum is closest to: A) 3.44 m B) 0.15 m C) 1.21 m D) 0.83 m E) 2.02 m 20) 21) In Situation 13.3, the mass of the swinging bob at the end of the pendulum is closest to: A) 0.454 kg B) 2.85 kg C) 0.150 kg D) 1.66 kg E) It cannot be determined from the information given. 21) 22) A mass at the end of an ideal spring vibrates with period T. If you double the mass, by what factor must you change the force constant of the spring so that the period of vibration will now be 2T? A) Decrease it by a factor of 2. B) Decrease it by a factor of 2. C) Increase it by a factor of 2. D) Decrease it by a factor of 4. E) Increase it by a factor of 2. 22) 23) A 2.00-kg mass is attached to an ideal horizontal spring of force constant 100.0 N/m and is at rest on a frictionless horizontal table. The spring is aligned along the x-axis and is fixed to a peg in the table. Suddenly this mass is struck by another 2.00-kg mass traveling along the x-axis at 3.00 m/s, and the two masses stick together. For the oscillations that result from this collision, the amplitude and period are closest to: A) 0.424 m, 1.26 s B) 0.300 m, 1.26 s C) 0.300 m, 0.889 s D) 0.424 m, 0.889 s E) 0.424 m, 5.00 s 23) 4

24) A meter stick is freely pivoted about the 20-cm mark. The frequency of small amplitude oscillations is closest to: A) 1.5 Hz B) 0.7 Hz C) 0.5 Hz D) 1.2 Hz E) 0.9 Hz 24) 25) A coin is placed on a platform attached to a spring that oscillates vertically in simple harmonic motion. The amplitude of the displacement is 1.20 cm. What is the maximum frequency for which the coin will always remain in contact with the platform? A) 6.89 Hz B) 8.75 Hz C) 12.2 Hz D) 4.55 Hz E) 2.25 Hz 25) 26) If both the mass of a simple pendulum and its length are doubled, the period will A) be unchanged. B) increase by a factor of 2. C) increase by a factor of 0.71. D) increase by a factor of 4. E) increase by a factor of 1.4 26) 27) What happens when a periodic driving force is applied to a vibrating system? A) The system will vibrate at the frequency of the driving force. B) The system will stop vibrating and finally come to a stop. C) It will vibrate at some multiple of the driving frequency (called a harmonic or "overtone"). D) The system will vibrate at its natural frequency. E) The system will exhibit chaotic motion. 27) Situation 13.4 A 5.0-kg block is attached to a spring whose force constant is 125 N/m. The block is pulled from its equilibrium position at x = 0 m to a position at x = +0.687 m and is released from rest. The block then executes damped oscillation along the x-axis. The damping force is proportional to the velocity. When the block first returns to x = 0 m, its x-component of velocity is -2.0 m/s and its x-component of acceleration is +5.6 m/s 2. 28) In Situation 13.4, the magnitude of the acceleration of the block upon release at x = +0.687 m is closest to: A) 16.4 m/s 2 B) 19.6 m/s 2 C) 18.0 m/s 2 D) 18.8 m/s 2 E) 17.2 m/s 2 28) 29) In Situation 13.4, the damping coefficient b is closest to: A) 14 kg/s 2 B) 22 kg/s 2 C) 16 kg/s 2 D) 18 kg/s 2 E) 20 kg/s 2 29) 30) In Situation 13.4, the work done by the damping force during the travel of the block from x = +0.687 m to x = 0 m is closest to: A) -20 J B) -30 J C) -25 J D) -15 J E) -10 J 30) 5

SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question. 31) An object of mass 6.8 kg is attached to a spring of force constant 1780 N/m. The object is set into simple harmonic motion, with an initial velocity of! o = 3.2 m/s and an initial displacement of x o = 0.14 m. Calculate the maximum velocity the object has during its motion. 31) 32) An object is undergoing simple harmonic motion with frequency f = 9.7 Hz and amplitude A = 0.12 m. At t = 0 the object is at x = 0. How long does it take the object to go from x = 0 to x = 0.024 m? 32) 33) A large stick is pivoted about one end and allowed to swing back and forth as a physical pendulum. The mass of the stick is 5.20 kg and its center of gravity (found by finding its balance point) is 2.00 m from the pivot. If the period of the swinging stick is 4.10 seconds, what is its moment of inertia, about an axis through the pivot? 33) 34) A 4.50-kg weight hangs from a vertical massless ideal spring. When set in vertical motion, the weight obeys the equation y(t) = (6.20 cm) cos[(2.74 rad/s)t - 1.40]. Find: (a) the time for this weight to vibrate one complete cycle, (b) the maximum speed and maximum acceleration of the weight, (c) the total distance the weight moves through in one cycle, (d) the maximum kinetic energy of the weight, and (e) the force constant of the spring. 34) Figure 13.3 35) In Fig. 13.3, a 0.24-kg ball is suspended from a string 9.79 m long and is pulled slightly to the left. As the ball swings through the lowest part of its motion it encounters a spring attached to the wall. The spring pushes against the ball and eventually the ball is returned to its original starting position. Find the time for one complete cycle of this motion if the spring constant is 21 N/m. (Assume that once the pendulum ball hits the spring there is no effect due to the vertical movement of the ball.) 35) 6

Answer Key Testname: UNTITLED1 1) D 2) D 3) D 4) C 5) A 6) E 7) B 8) B 9) B 10) A 11) C 12) B 13) B 14) B 15) D 16) D 17) B 18) C 19) E 20) C 21) E 22) C 23) B 24) B 25) D 26) E 27) A 28) E 29) A 30) A 31) 3.9 m/s 32) 0.0033 seconds 33) 43.4 kg m 2 34) (a) 2.29 s (b).170 m/s, 0.465 m/s 2 (c) 24.8 cm (d) 0.0649 J (e) 33.8 N/m 35) 3.5 s 7