School of Mechanical Engineering Purdue University. ME375 Frequency Response - 1

Similar documents
Bode Diagrams School of Mechanical Engineering ME375 Frequency Response - 29 Purdue University Example Ex:

School of Mechanical Engineering Purdue University

Dynamic Response of Linear Systems

School of Mechanical Engineering Purdue University. ME375 Transfer Functions - 1

EE Control Systems

Transfer Function Analysis

Mechatronics. Time Response & Frequency Response 2 nd -Order Dynamic System 2-Pole, Low-Pass, Active Filter

2.004 Dynamics and Control II Spring 2008

Lecture 13. Graphical representation of the frequency response. Luca Ferrarini - Basic Automatic Control 1

Chapter 4 : Laplace Transform

Answer: 1(A); 2(C); 3(A); 4(D); 5(B); 6(A); 7(C); 8(C); 9(A); 10(A); 11(A); 12(C); 13(C)

School of Mechanical Engineering Purdue University. ME375 Dynamic Response - 1

1the 1it is said to be overdamped. When 1, the roots of

EXPERIMENT OF SIMPLE VIBRATION

Solutions - Homework # 1

Course Outline. Designing Control Systems. Proportional Controller. Amme 3500 : System Dynamics and Control. Root Locus. Dr. Stefan B.

Class 07 Time domain analysis Part II 2 nd order systems

Problem 1. Problem Engineering Dynamics Problem Set 9--Solution. Find the equation of motion for the system shown with respect to:

MEM 255 Introduction to Control Systems: Analyzing Dynamic Response

5.1. Periodic Signals: A signal f(t) is periodic iff for some T 0 > 0,

Frequency Response Methods

FIR Filter Design: Part II

University of California at Berkeley College of Engineering Department of Electrical Engineering and Computer Sciences

Exponential Moving Average Pieter P

Chapter 2 Feedback Control Theory Continued

Vibratory Motion. Prof. Zheng-yi Feng NCHU SWC. National CHung Hsing University, Department of Soil and Water Conservation

Lab(8) controller design using root locus

CHAPTER NINE. Frequency Response Methods

Signal Processing in Mechatronics. Lecture 3, Convolution, Fourier Series and Fourier Transform

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science. BACKGROUND EXAM September 30, 2004.

Chapter 7: The z-transform. Chih-Wei Liu

Exam. Notes: A single A4 sheet of paper (double sided; hand-written or computer typed)

Dr. Seeler Department of Mechanical Engineering Fall 2009 Lafayette College ME 479: Control Systems and Mechatronics Design and Analysis

FREE VIBRATION RESPONSE OF A SYSTEM WITH COULOMB DAMPING

Chapter 10: Power Series

Generalizing the DTFT. The z Transform. Complex Exponential Excitation. The Transfer Function. Systems Described by Difference Equations

Time-Domain Representations of LTI Systems

Appendix: The Laplace Transform

732 Appendix E: Previous EEE480 Exams. Rules: One sheet permitted, calculators permitted. GWC 352,

Sinusoidal Steady-state Analysis

Chapter 15: Fourier Series

Filter banks. Separately, the lowpass and highpass filters are not invertible. removes the highest frequency 1/ 2and

ELEG3503 Introduction to Digital Signal Processing

2C09 Design for seismic and climate changes

6.003 Homework #3 Solutions

Solution of EECS 315 Final Examination F09

COMM 602: Digital Signal Processing

FIR Filters. Lecture #7 Chapter 5. BME 310 Biomedical Computing - J.Schesser

Dynamic Response of Second Order Mechanical Systems with Viscous Dissipation forces

Numerical Methods for Partial Differential Equations

Introduction to Signals and Systems, Part V: Lecture Summary

MATH 31B: MIDTERM 2 REVIEW

Solutions. Number of Problems: 4. None. Use only the prepared sheets for your solutions. Additional paper is available from the supervisors.

EE 205 Dr. A. Zidouri. Electric Circuits II. Frequency Selective Circuits (Filters) Bode Plots: Complex Poles and Zeros.

The z-transform. 7.1 Introduction. 7.2 The z-transform Derivation of the z-transform: x[n] = z n LTI system, h[n] z = re j

Voltage controlled oscillator (VCO)

Ch3 Discrete Time Fourier Transform

EECE 301 Signals & Systems

CDS 101: Lecture 8.2 Tools for PID & Loop Shaping

Chapter 2 Systems and Signals

mx bx kx F t. dt IR I LI V t, Q LQ RQ V t,

Dynamics of Structures 5th Edition Chopra SOLUTIONS MANUAL

2C09 Design for seismic and climate changes

Solution of Linear Constant-Coefficient Difference Equations

Signals & Systems Chapter3

EE Midterm Test 1 - Solutions

Contents Kreatryx. All Rights Reserved.

Simple Linear Regression

x[0] x[1] x[2] Figure 2.1 Graphical representation of a discrete-time signal.

ECE 422/522 Power System Operations & Planning/Power Systems Analysis II : 6 - Small Signal Stability

Dynamic System Response

Math 21B-B - Homework Set 2

Frequency Response of FIR Filters

Chapter 7 z-transform

For example suppose we divide the interval [0,2] into 5 equal subintervals of length

Lecture 6 Chi Square Distribution (χ 2 ) and Least Squares Fitting

Principle Of Superposition

Analysis of the No-Load Characteristic of the Moving Coil Linear Compressor

Module 18 Discrete Time Signals and Z-Transforms Objective: Introduction : Description: Discrete Time Signal representation

CHAPTER 7 : BODE PLOTS AND GAIN ADJUSTMENTS COMPENSATION

Stopping oscillations of a simple harmonic oscillator using an impulse force

(, ) (, ) (, ) ( ) ( )

Lecture 6 Chi Square Distribution (χ 2 ) and Least Squares Fitting

Crash course part 2. Frequency compensation

Chapter 4. Fourier Series

Linear Differential Equations of Higher Order Basic Theory: Initial-Value Problems d y d y dy

EE / EEE SAMPLE STUDY MATERIAL. GATE, IES & PSUs Signal System. Electrical Engineering. Postal Correspondence Course

Numerical Methods in Fourier Series Applications

For example suppose we divide the interval [0,2] into 5 equal subintervals of length

Math 105: Review for Final Exam, Part II - SOLUTIONS

Apply change-of-basis formula to rewrite x as a linear combination of eigenvectors v j.

CONTROL SYSTEMS. Chapter 7 : Bode Plot. 40dB/dec 1.0. db/dec so resultant slope will be 20 db/dec and this is due to the factor s

Computing the output response of LTI Systems.

The type of limit that is used to find TANGENTS and VELOCITIES gives rise to the central idea in DIFFERENTIAL CALCULUS, the DERIVATIVE.

x x x Using a second Taylor polynomial with remainder, find the best constant C so that for x 0,

Linear Regression Analysis. Analysis of paired data and using a given value of one variable to predict the value of the other

GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL OF ELECTRICAL AND COMPUTER ENGINEERING

1. Linearization of a nonlinear system given in the form of a system of ordinary differential equations

ME 375 FINAL EXAM Friday, May 6, 2005

Transcription:

Case Study ME375 Frequecy Respose -

Case Study SUPPORT POWER WIRE DROPPERS Electric trai derives power through a patograph, which cotacts the power wire, which is suspeded from a cateary. Durig high-speed rus betwee New Have, CT ad New York City, the trai experieces itermittet power loss at 4 km/hr ad km/hr. ME375 Frequecy Respose -

Case Study Patograph Model F (t) mz b b z k k z b z k z F c (t) m z mz bz kz bz kz F () c t k k m b b z For m = 3. kg, b = 5 N/(m/s), k = 96 N/m, m =.5 kg, b = 75 N/(m/s), ad k = 958 N/m: Z( s).87( s 9.78s834) 4 3 c () F s s 6.3s 79s 855s347,75 ME375 Frequecy Respose - 3

Case Study Frequecy Respose -6 ) Magitude (db) -7-8 -9 - - 8 Phase (deg) 35 9 45 Frequecy (rad/sec) ME375 Frequecy Respose - 4

Frequecy Respose Forced Respose to Siusoidal Iputs Frequecy Respose of LTI Systems Bode Plots ME375 Frequecy Respose - 5

Forced Respose to Siusoidal Iputs Ex: Let s fid the forced respose of a stable first order system: to a siusoidal iput: Forced respose: y 5yu ut () si() t Y() s G() s U() s where Gs ( ) ad Us ( ) Lsi( t) Y( s) PFE: A A Y() s A 3 Compare coefficiets to fid A, A ad A 3 : ME375 Frequecy Respose - 6

Forced Respose to Siusoidal Iputs Ex: (cot.) Use ILT to fid y(t) ) : yt ( ) L Y( s) L Useful lformula: Asi( i( t ) Bcos( t ) A B si( i( t ) Where ata( BA, ) = ( A jb) Usig this formula, the forced respose ca be represeted by 5t yt ( ) e si( t) ME375 Frequecy Respose - 7

Forced Respose of st Order System.5 Output Iput is si(t) Iput.5 Respose -.5 - -.5-4 6 8 4 Time (sec) ME375 Frequecy Respose - 8

Forced Respose to Siusoidal Iputs Ex: Give the same system as i the previous example, fid the forced respose to u(t) ( ) = si( t). Y() s G() s U() s where Gs () ad Us () Lsi( t) Y( s) ME375 Frequecy Respose - 9

Forced Respose of st Order Systems Iput is si(t) Output.8.6.4 Respose. -. -.4 -.6 -.8 - Iput.5.5.5 3 3.5 4 4.5 5 Time (sec) ME375 Frequecy Respose -

Frequecy Respose Ex: Let s revisit the same example where y 5yu ad the iput is a geeral siusoidal iput: si(t). Ys () Gs () Us () s 5 s s 5 ( s j )( sj ) A A A3 Ys () s5 sj sj Istead of comparig coefficiets, use the residue formula to fid A i s: ( 5) ( ) 5 ( 5) A s Y s s s ( 5) s s s 5 A ( s j) Y( s) ( s j) Gs ( ) sj s sj A3 ( s j) Y( s) ( s j) Gs ( ) s j s s j ME375 Frequecy Respose -

Frequecy Respose Ex: (Cot.) A 5 A G( j ) j j 5 j j A 3 G ( j ) j j 5 j j The steady state respose Y SS (s) is: 3 A A YSS () s s j s j jt jt SS 3 y () t L Y ( s) A e A e SS yss ( t ) G ( j ) si( t ) where G( j) ME375 Frequecy Respose -

Frequecy Respose Frequecy Respose ME375 Frequecy Respose - 3

I Class Exercise For the curret example, y 5 yu Calculate the magitude ad phase shift of the steady state respose whe the system is excited by (i) si(t) ad (ii) si(t). Compare your result with the steady state respose calculated i the previous examples. Note: Gs () G( j ) s5 j 5 G( j ) ad G( j) ata(,5) 5 ME375 Frequecy Respose - 4

Frequecy Respose Frequecy respose is used to study the steady state output y SS (t) of a stable system due to siusoidal iputs at differet frequecies. I geeral, give a stable system: ( ) ( ) ( m) ( m) a y a y a ya yb u b u bub u m m m m bms bms bs b Ns () bm sz sz szm () as as as a Ds a s p s p s p ( )( ) ( ) Gs () ( )( ) ( ) If the iput is a siusoidal sigal with frequecy, i.e. ut () A si( t) u the the steady state output y SS (t) is also a siusoidal sigal with the same frequecy as the iput sigal but with differet magitude ad phase: y () t G( j ) A si( tg( j)) SS where G(j) ) is the complex umber obtaied by substitute for j s i G(s) ), i.e. G ( j ) G ( s ) s j u m m m b m ( j ) b ( j ) b ( j ) b a ( j) a ( j) a ( j) a ME375 Frequecy Respose - 5

Frequecy Respose Iput u(t) U(s) LTI System G(s) Output y(t) Y(s) u / y SS / t t u () t A si( t) y () t G ( j ) A si( t G( j)) u A differet perspective of the role of the trasfer fuctio: Amplitude of the steady state siusoidal output G( j ) Amplitude of the siusoidal iput G( j ) Phase differece (shift) betwee yss ( t) ad the siusoidal iput SS u ME375 Frequecy Respose - 6

Frequecy Respose G Iput u(t) Output y(t) G ME375 Frequecy Respose - 7

I Class Exercise Ex: st Order System The motio of a pisto i a cylider ca be modeled by a st order system with force as iput ad pisto velocity as output: f(t) () Calculate the steady state output of the system whe the iput is Iput f(t) Steady State Output v(t) si( t) ) G(j) ) si( t + ) si(t) si(t + si(t) si(t + si(t) si(t + v The EOM is: si(3t) si(3t + Mv Bv f() t si(4t) si(4t + () Let M = kg. ad B = 5N/(m/s).5 N/(m/s), fid the trasfer fuctio of the system: si(5t) si(5t + si(6t) si(6t + ME375 Frequecy Respose - 8

I Class Exercise (3) Plot the frequecy respose plot.8-6.6 - Magitude ((m/s)/n).4..8.6 Phase (deg) -3-4 -5-6 -7 4.4-8. -9 3 4 5 6 7 Frequecy (rad/sec) 3 4 5 6 7 Frequecy (rad/sec) ME375 Frequecy Respose - 9

Example - Vibratio Absorber (I) Without vibratio absorber: M z K B f(t) TF (from f(t) ) to z ): EOM: M z B z K z f () t () Let M = kg, K = N/m, B = 4 N/(m/s). Fid the steady state respose of the system for f(t) ) = (a) si(8.5t) (b) si(t) (c) si(.7t). Iput f(t) Steady State Output z (t) si( t) G(j) si( t + ) si(8.5t) si(8.5t + si(t) si(t + si(.7t) si(.7t + ME375 Frequecy Respose -

Example - Vibratio Absorber (I). f(t) = si(8.5 t) 5.5 z (m) -.5 -..4 f(t) = si( t) z (m). -. -.4.5 f(t) = si(.7 t) z (m) -.5 5 5 5 3 35 4 45 5 Time (sec) ME375 Frequecy Respose -

Example - Vibratio Absorber (II) With vibratio absorber: M K B M K B f(t) EOM: M z ( B B ) z K K z B z K z f ( t) z z TF (from f(t) )toz z ): Mz Bz Kz Bz Kz Let M = kg, K = N/m, B = 4 N/(m/s), M = kg, K = N/m, ad B =. N/(m/s). Fid the steady state respose of the system for f(t) ) = (a) si(8.5t) (b) si(t) (c) si(.7t). Iput f(t) Steady State Output z (t) si( t) G(j) si( t + ) si(8.5t) si(8.5t + si(t) si(t (t+ + si(.7t) si(.7t + ME375 Frequecy Respose -

Example - Vibratio Absorber (II).4 f(t) = si(8.5 t). z (m) -. -.4.4 f(t) = si( t) z (m). -. -.4. f(t) = si(.7 t) z (m). -. -. 5 5 5 3 35 4 45 5 Time (sec) ME375 Frequecy Respose - 3

Example - Vibratio Absorber (II) Take a closer look at the poles of the trasfer fuctio: The characteristic ti equatio 4 3 s 5.s.4s 5s Poles: p.8.5 j, p3,4.55.7 j What part of the poles determies the rate of decay for the trasiet respose? (Hit: whe p = jthe respose is e t e j t ) ME375 Frequecy Respose - 4

Example - Vibratio Absorbers Frequecy Respose Plot No absorber added Frequecy Respose Plot Absorber tued at rad/sec added.5.5 Magitude (m/n). 5.5..5 Magitude (m/n). 5.5..5 4 6 8 4 6 8 Frequecy (rad/sec) 4 6 8 4 6 8 Frequecy (rad/sec) Phase (d deg) -45-9 -35 Phase (d deg) -45-9 -35-8 4 6 8 4 6 8 Frequecy (rad/sec) -8 4 6 8 4 6 8 Frequecy (rad/sec) ME375 Frequecy Respose - 5

Example - Vibratio Absorbers agitude (db) Phase (deg); M Bode Plot No absorber added -3-4 -5-6 -7-8 -9 - -45-9 -35 Phase (deg); Ma agitude (db) Bode Plot Absorber tued at rad/sec added -3-4 -5-6 -7-8 -9 - -45-9 -35-8 Frequecy (rad/sec) -8 Frequecy (rad/sec) ME375 Frequecy Respose - 6

Bode Diagrams (Plots) Bode Diagrams (Plots) A uique way of plottig the frequecy respose fuctio, G(j), w.r.t. frequecy of systems. Cosists of two plots: Magitude Plot : plots the magitude of G(j) ) i decibels w.r.t. logarithmic frequecy, i.e. Gj ( ) log Gj ( ) vs log db Phase Plot : plots the liear phase agle of G(j) ) w.r.t. logarithmic frequecy, i.e. G( j) vs log To plot Bode diagrams, oe eeds to calculate the magitude ad phase of the correspodig trasfer fuctio. Ex: Gs () s s s ME375 Frequecy Respose - 7

Bode Diagrams Revisit the previous example: s ( j) Gs () G( j) s s j ( j ) 3 5 G( j) G ( j )...5 5 5 G( j) log Gj ( ) G( j ) Phase (deg g); Magitude (db B) - -3-5 5-5 - - Frequecy (rad/sec) ME375 Frequecy Respose - 8

Bode Diagrams Recall that if The m m bm s bm s b s b bm ( s z )( s z ) ( s zm ) G ( s ) as a s asa a ( s p )( s p ) ( s p ) Gj ( ) bm( j z )( j z ) ( j zm) a ( j p )( j p ) ( j p ) bm a ( j p ) ( j p ) ( j p ) F I F I H G KJ HG c h c h ( j z ) ( j z ) ( j z ) bm log ( Gj ( ) ) log log log a ( j p ) KJ ( j p ) ad log ( j z ) log ( j z ) bm( j z)( j z) ( j zm) Gj ( ) a ( j p )( j p ) ( j p ) ( j z ) ( j z ) ( j z ) ( j p ) ( j p ) ( j p ) m F HG I KJ m ME375 Frequecy Respose - 9

Example Ex: Fid the magitude ad the phase of the followig trasfer fuctio: G ( s ) 3 3s s 9s s 3 s 76s8 ( )( ) ME375 Frequecy Respose - 3

Bode Diagram Buildig Blocks st Order Real Poles Trasfer Fuctio: Gp() s, s Frequecy Respose: Gp( j), j R Gp ( j ) S T Gp ( j) ata(, ) ta a f Phase (deg g); Magitude (db B) -3 - -4-45 Q: By just lookig at the Bode diagram, ca you determie the time costat ad the steady state gai of the system? -9././ / / / Frequecy (rad/sec) ME375 Frequecy Respose - 3

Example st Order Real Poles Trasfer Fuctio: 5 Gs () s 5 Plot the straight lie approximatio of G(s) s Bode diagram: ) ); Magitude (db Phase (deg) 5 5-45 -9 - Frequecy (rad/sec) ME375 Frequecy Respose - 3

Bode Diagram Buildig Blocks st Order Real Zeros Trasfer Fuctio: Gz( s) s, Frequecy Respose: G ( j ) j, R S T z G G z z ( j) ( j) ata(, ) ta a f B) Phase (deg g); Magitude (d 4 3 9 45././ / / / Frequecy (rad/sec) ME375 Frequecy Respose - 33

Example st Order Real Zeros Trasfer Fuctio: G() s 7. s 7. Plot the straight lie approximatio of G(s) s ( ) Bode diagram: Phase (de eg); Magitude (d db) 5 5 9 45 - Frequecy (rad/sec) ME375 Frequecy Respose - 34

Example Lead Compesator Trasfer Fuctio: 35s 35 Gs () s 5 Plot the straight lie approximatio of G(s) s Bode diagram: Phase (de eg); Magitude (d db) 3-9 -9 - Frequecy (rad/sec) ME375 Frequecy Respose - 35

st Order Bode Diagram Summary st Order Poles G p( s), s Break Frequecy b rad/s Mag. Plot ta Approximatio db from DC to b ad a straight lie with db/decade slope after b. Phase Plot Approximatio deg from DC to. Betwee ad b b, a straight lie from deg to 9 deg (passig 45 deg at b ). For frequecy higher tha b, straight lie o 9 deg. st Order Zeros G z( s ) s, Break Frequecy b rad/s Mag. Plot Approximatio db from DC to b ad a straight lie with db/decade slope after b. Phase Plot Approximatio deg from DC to. Betwee b b ad b, a straight lie from deg to 9 deg (passig 45 deg at b ). For frequecy higher tha b, straight lie o 9 deg. b Note: By lookig at a Bode diagram you should be able to determie the relative order of the system, its break frequecy, ad DC (steady-state) state) gai. This process should also be reversible, i.e. give a trasfer fuctio, be able to plot a straight lie approximated Bode diagram. ME375 Frequecy Respose - 36

Bode Diagram Buildig Blocks Itegrator (Pole at origi) Trasfer Fuctio: Gp() s s Frequecy Respose: Gp( j) j R Gp ( j ) S Gp( j) 9 T Phase (deg); Magitud de (db) - -4-6 -45-9 -35. Frequecy (rad/sec) ME375 Frequecy Respose - 37

Bode Diagram Buildig Blocks Differetiator (Zero at origi) Trasfer Fuctio: Gz( s) s Frequecy Respose: G ( j) j R S T z S Gz ( j) G ( j) z 9 Phase (deg); Magitud de (db) 6 4-35 9 45. Frequecy (rad/sec) ME375 Frequecy Respose - 38

Example Combiatio of Systems Trasfer Fuctio: 3 35s 35 Gs () ss ( 5) Plot the straight lie approximatio of G(s) s Bode diagram: ); Magitude (db B) Phase (deg) - 9-9 - Frequecy (rad/sec) ME375 Frequecy Respose - 39

Example Combiatio of Systems Trasfer Fuctio: 5 Gs () ss ( 55s5) Plot the straight lie approximatio of G(s) s Bode diagram: Phase (de eg); Magitude (d db) 4-4 -8 - -9-8 -7-3 Frequecy (rad/sec) ME375 Frequecy Respose - 4

Bode Diagram Buildig Blocks d Order Complex Poles Trasfer Fuctio: Gp() s s s, - Frequecy Respose: G G p p j j j 4 (db) Phase (d deg); Magitude -4-6 -8-9 G j ta p -8 Frequecy (rad/sec) ME375 Frequecy Respose - 4

Example Secod-Order System Trasfer Fuctio: 5 Gs () s s 5 Plot the straight lie approximatio of G(s) s ( ) Bode diagram: (db) eg); Magitude ( Phase (d 4-4 -8 - -9-8 3 4 Frequecy (rad/sec) ME375 Frequecy Respose - 4

Bode Diagram Buildig Blocks d Order Complex Zeros Trasfer Fuctio: 6 s s 4 Gz( s), Frequecy Respose: Gz j j - p G j G j z 4 p G j G j z ta Phase (deg g); Magitude (db B) 8 8 9 Frequecy (rad/sec) ME375 Frequecy Respose - 43

Bode Diagrams of Poles ad Zeros Bode Diagrams of stable complex zeros are the mirror images of the Bode diagrams of the idetical stable complex poles w.r.t. the db lie ad the deg lie, respectively. Let G ( s ) R S T R S G p p ( j) G () s z G z ( j) G ( j) G ( j) p z Magitude (db B) 4 - -4 8 e p j c z h log G ( j) log G ( j) T Gp( j) Gz( j) Ph hase (deg) -8 Frequecy (rad/sec) ME375 Frequecy Respose - 44

d Order Bode Diagram Summary d Order Complex Poles G p s s s (), Break Frequecy b rad/s Mag. Plot Approximatio db from DC to ad a straight lie with 4 db/decade slope after. Peak value occurs at: r Gp( j r) MAX Phase Plot Approximatio deg from DC to 5. Betwee ad 5, a straight lie from deg to 8 deg (passig 9 deg at ). For frequecy higher h tha, straight lie o 8 deg. d Order Complex Zeros G s s ( s), z Break Frequecy b rad/s Mag. Plot Approximatio db from DC to ad a straight lie with 4 db/decade slope after. Phase Plot Approximatio deg from DC to 5. Betwee 5 ad a straight lie from deg to 8, deg (passig 9 deg at ). For frequecy higher tha, straight lie o 8 deg. ME375 Frequecy Respose - 45

d Order System Frequecy Respose A Closer Look: Gp( s), s s Frequecy Respose Fuctio: Magitude: G p j ( j) ( j) j Phase: Gp j Gp j j ata, The maximum value of G(j) occurs at the Peak (Resoat) Frequecy r : r ad Gp ( j r) ME375 Frequecy Respose - 46

d Order System Frequecy Respose 4 (db) Phase (de eg); Magitude - -4-6 -45-9 -35-8. Frequecy (rad/sec) ME375 Frequecy Respose - 47

d Order System Frequecy Respose A Few Observatios: Three differet characteristic frequecies: Natural Frequecy ( ) Damped Natural Frequecy ( d ): d Resoat t(p (Peak) k)f Frequecy ( r ): r d Whe the dampig ratio,, there is o peak i the Bode magitude plot. DO NOT cofuse this with the coditio for over-damped ad uder-damped damped systems: whe the system is uder-damped damped (has overshoot) ad whe the system is over-damped d( (o overshoot). As, r ad G(j) icreases; also the phase trasitio from degto 8 deg becomes sharper. r ME375 Frequecy Respose - 48

Example Combiatio of Systems Trasfer Fuctio: G ( s ) ( s s 5) ss ( )( s s 5) Plot the straight lie approximatio of G(s) s Bode diagram: ME375 Frequecy Respose - 49

Example 4 Magitude (db) - -4-6 -8 8 9 Phas se (deg) -9-8 -7-3 Frequecy (rad/sec) ME375 Frequecy Respose - 5