R 3 183/06.98 Replces: R 3 18/05.9 R 3 183/06.98 Soft switching / nd /3 directionl vlves with DC solenoids Model WE...73 -.. /1.. Nominl sizes 6 nd 10 Series 6X (size 6)/3X (size 10) Mximum operting pressure 5076/569 SI (350/315 r) Mximum flow 15.85/6. GM (60/100 L/min) H/ 657/95 Model WE 10 E73-3X/CGN9K/1 with plug-in connector Contents Fetures Description ge Fetures 1 Ordering codes Symols 3 Functionl description, section 3 echnicl dt ccelertion vlues 5 Chrcteristic curves 5 Operting limits 6 Unit dimensions 7 nd 8 ville spre prts nd sels 9 Direct operted directionl spool vlve with solenoid opertion Soft switching chrcterisitics orting pttern to DIN 30 form, ISO 01 nd CEO R 11 H Mounts on stndrd ISO 01, NF 3.5.1 M R1 nd NSI 93.7 D interfces For supltes see ctlog sheets R 5 05 (size 6), nd R 5 05 (size 10), seprte order Wet pin solenoids with removle coils Solenoid coil cn e rotted through 90 Coils cn e replced without opening the pressure tight chmer Individul electricl connections With conceled mnul override.we 73 1/10
R 3 183/06.98 Ordering code 3 6 7 9 10 11 1 15 18 19 3 3 service ports = 3 service ports = Nominl size 6 = 6 Nominl size 10 = 10 Spool symols e.g. D73, E73, E73, E73 etc. for possile versions see pge 3 Size 6 Series 60 to 69 = 6X (60 to 69: unchnged instlltion nd connection dimensions) Size10 Series 30 to 39 = 3X (30 to 39: unchnged instlltion nd connection dimensions ) Spring return = No code Without spring return with detent = OF (only ville for symol " D73") Nominl size 6 = E Nominl size 10 = C V DC = G 05 V DC = G05 ) For the ordering detils of other voltges nd frequencies see pge. C voltge supply (permissile voltge tolernce ± 10%) WE Nominl voltge of DC solenoids when used with n C supply Ordering code 110 V - 50/60 Hz 96 V G96 10 V - 60 Hz 30 V - 50/60 Hz 05 V G05 N9 K 1 * Further detils in cler text No code = NR sels V = FM sels (other sels on request) ttention! he comptiility of the sels nd pressure fluid hs to e tken into ccount! No code = Without crtridge throttle 08 = hrottle Ø 0.0315 in (0.8 mm) 10 = hrottle Ø 0.039 in (1.0 mm) 1 = hrottle Ø 0.07 in (1. mm) Used where the flow > the performnce limit of the vlve, fitted in port 1 = Switching time dely Electricl connection types K 1) = Single connection; with component plug DIN 3 650-M, without plug-in connector Z5 = ngled plug to DIN 3 650 Z55 = Lrge ngled plug Z55L = Lrge ngled plug with lmp N9 = With conceled mnul override 1) lug-in connectors must e ordered seprtely. ) For connection to the lternting voltge supply DC solenoid controlled vi rectifier must e used (see tle left). For single connection plug-in connector with uilt-in rectifier my e used (seprte order). Rexroth Hydrulics /10.WE 73
Symols R 3 183/06.98 = 73 = D73.../OF.. = D73 = 73 = Y73 0 0 0 0 0 0 =.73 3) =.73 = E73 3) = G73 = H73 3) Exmple: Spool E73 with switching position "" ordering detils..e73.. ) Not with size 10 = J73 = R73 = W73 ) Functionl description, section 5 1 3 5 6 6 Model WE 6 E73-6X/E.../1 () Model WE...73.. directionl control vlves re solenoid operted directionl spool vlves with soft switching chrcteristics. hey control the strt, stop nd direction of flow. Due to the design of the vlve spool nd solenoid, shocks which occur during switching the vlve on or off re gretly reduced. he switching shocks, mesured s n ccelertion vlue "" in ft/s (m/s ), re reduced y up to pprox. 85 %, dependent on the spool model, when compred to stndrd vlve (see r chrt on pge 5). Essentilly the directionl control vlves consist of housing (1), one or two solenoids (), the control spool (3), nd one or two return springs (). In the de-energized condition the control spool (3) is held in the neutrl or initil position y mens of return springs () (except for impulse spool). he control spool (3) is operted y wet pin solenoids (). o gurntee stisfctory opertion, cre should e tken to ensure tht the solenoid pressure chmer is filled with oil. he force of the solenoid ( ) cts vi the plunger (5) on the control spool (3) nd pushes this from its neutrl position to the required end position. his gives free-flow from to nd to or to nd to. When solenoid () is de-energized, control spool (3) is returned to its neutrl position y mens of return springs (). mnul override (6), llows movement of the control spool (3) without energizing the solenoid. Crtridge throttle If, due to prticulr operting conditions during the switching sequences, flows cn occur which re lrger thn the vlve performnce curves llow, then it is necessry to fit crtridge throttle. his is inserted in the port of the directionl control vlve. Model WE...73.../ /...WE 73 3/10 Rexroth Hydrulics
R 3 183/06.98 echnicl dt (for pplictions outside these prmeters, plese consult us!) Generl Nominl size Size 6 10 Instlltion position optionl Mx. mient temperture F ( C) 1 (50) Weight Single solenoid vlve ls (kg) 3. (1.5) 9.918 (.5) Hydrulic Vlve with solenoids ls (kg).3 (1.95) 13. (6.1) Mx. operting pressure orts,, SI (r) 5076 (350) 569 (315) orts SI (r) 306 (10) 306 (10) ressure fluid Minerl oil (HL, HL) to DIN 51 5 1) ; Fst io-degrdle pressure fluids to VDM 568 (lso see R 90 1); HEG (rpe seed oil) 1) ; HEG (olyglycol) ) ; HEES (synthetic ester) ) ; other fluids on request ressure fluid temperture rnge F ( C) to +176 ( 30 to +80) (for NR sels) to +176 ( 0 to +80) (for FM sels) Viscosity rnge SUS (mm /s) 35 to 318 (.8 to 500) Degree of contmintion Mximum permissile degree of contmintion of the fluid is to NS 1638 clss 9. We, therefore, recommend filter with minimum retention rte of ß 10 75. Electricl ville voltges 3) V 1,, 96, 05 1,, 96, 05 Voltge tolernce (nominl voltge) % ±10 ±10 ower consumption W 30 35 Duty cycle D D Switching time t S to ISO 603 ON/OFF pprox. 3 to times longer thn stndrd vlve ccelertion "" in ft/s (m/s ) % see r chrt on pge 5 Switching frequency 1/h 700 700 rotection to DIN 0 050 I 65 I 65 Insultion clss VDE 0580 F F Mx. coil temperture ) F ( C) 30 (150) 30 (150) 1) Suitle for NR nd FM sels ) Only suitle for FM sels 3) Specil voltges on request In order to comply with sfety regultions, the erth line (E ) must e connected. ) Due to the occurring surfce tempertures of the solenoid coils the Europen Stndrds EN563 nd EN98 must e tken into ccount! Rexroth Hydrulics /10.WE 73
ccelertion vlue "" (mesured t cylinder) R 3 183/06.98 % 100 Stndrd Soft switching ccelertion in m/s 80 60 0 0 M = solenoid F = spring 0 M F M F Chrcteristic curves, mesured t ν = 190 SUS (1 mm /s) nd t = 1 F (50 C) ressure differentil in SI (r) 160 15 116 87 58 9 p-q V -chrcteristic curves, size 6 (11) 8 6 7 3 5 1 9 (10) (8) (6) () () 0 (0) (0) (60) Symol Flow direction - - - - - - E73 1 1 1 1 J73 3 3 H73 1 1 1 1 /73 6 6 D/Y73 7 7 7 7 G73 8 8 8 8 5 R73 9 6 9 6 W73 9 9 9 9 5.8 10.6 15.85 Flow in GM (L/min) p-q V -chrcteristic curves, size 10 ressure differentil in SI (r) 18 03 17 15 116 87 58 9 (15) (1) (1) (10) (8) (6) () () 5 6 1 7 3 8 Symol Flow direction - - - - - /73 D/Y73 1 1 1 1 E73 G73 3 H73 8 8 J73 R73 7 3 5 Symol "R73" in switched position (Diff.) 6 Symol "R73" in switched position (Diff.) 0 (0) (0) (60) (80) (90) 5.8 10.6 15.9 1.1 3.8 Flow in GM (L/min).WE 73 5/10 Rexroth Hydrulics
R 3 183/06.98 Operting limits, mesured t ν = 190 SUS (1 mm /s) nd t = 1 F (50 C) ttention! he given operting limits re vlid for the use with two flow directions (e. g. from to nd simultneous return flow from to ). Due to the flow forces ctive inside the vlves the permissile operting limit my e significntly lower if only one flow direction (e. g. from to nd closed port ) is used! (For such pplictions, plese consult us.) he operting limits were mesured with solenoids t operting temperture, 10% under voltge nd without tnk ck pressure. Size 6 Operting pressure in SI (r) 5076 351 366 901 176 150 (350) (300) (50) (00) (150) (100) 5 3 7 Chr. curve Symol 1 73, 73 G73 3 D73, Y73 J73 5 R73 6 E73, W73, D73/OF 7 H73 75 (50) 1 6 0 (10) (0) (30) (0) (50) (60).5 5.8 7.93 15.85 Flow in GM (L/min) Size10 Operting pressure in SI (r) 351 366 901 176 150 (300) (50) (00) (150) (100) 1 3 Chr. curve Symol 1 73, 73 G73 3 H73 J73, D73, Y73, E73, R73, D73/OF 75 (50) 0 (0) (0) (60) (80) (100) 5.8 10.57 15.85 1.13 6. Flow in GM (L/min) Rexroth Hydrulics 6/10.WE 73
Unit dimensions: Nominl size 6: dimensions in inches (millimeters) R 3 183/06.98.1 1. 1. (31) 1.8 (3.5) 1.77 (5) g11 1.6 (0.5) 0.59 (15).7 (69) 5 10 8 10 6 11 0.59 (15) 0.59 (15).17 (55) Ø 0.37 (9.) Ø 0.09 (5.3) g11 1.65 () 0.91 (3) 3.3 (87) 3.66 (93) 7 1.99 (50.5) 0.866 ().5 (6) 3. (81.7).87 (13.7) 5.7 (15.7) 5.7 (15.7) 8.09 (05.) 1.99 (50.5) 13 9 1 1 3 1 1 3-position vlve (E73..) -position vlve with 1 solenoid (73, D73, E73...) 3 -position vlve with 1 solenoid (Y73, E73...).1 Solenoid "" (plug-in connector color gry). Solenoid "" (plug-in connector color lck) 5 rotected mnul override N9 Mnul override cn only e operted up to tnk pressure of pprox. 75 SI (50 r). void dmge to the override! 6 lug-in connector DIN 3 650 1) (cn e rotted in 90 increments) 7 lug-in connector with optionl light/ rectifier DIN 3 650 1) (cn e rotted in 90 increments) 8 Nmeplte 9 R-ring 0.386 in x 0.059 in x 0.07 in (9.81 mm x 1.5 mm x 1.78 mm) 10 lug for vlves with one soleniod 11 Spce required to remove plug 1 Spce required to remove solenoid 13 Hnd nut, tightening nut M =.95 l-ft ( Nm) 1 orting pttern DIN 30 form, ISO 01 nd CEO R 11 H 0.000/.0 in 0.01/100 mm 3 (R mx ) Required surfce finish of mting piece Supltes G 31/1 (SE-; 7/16-0) G 3/1 (SE-6; 9/16-18) G 50/1 (SE-8; 3/-16) Must e ordered seprtely, see R 5 05 Vlve mounting olts ) 10- UNC x M5 x 1.97 (50) DIN 91-10.9, socket hed cp screws M = 6.6 l-ft (9 Nm) 1) must e ordered seprtely.we 73 7/10 Rexroth Hydrulics
R 3 183/06.98 Unit dimensions: Nominl size 10: dimensions in inches (millimeters) 6 5.1 5. 3.58 (91).13 (5) 0.73 (18.5).76 (70) 1.81 (6) 11 13 1 8 0.59 (15) 9 7.1 g 11 7. 8 0.59 (15).69 (119).9 (15) 1.58 (0) 1.18 (30) Ø 11 g 11.95 (75) Ø 0.6 (6.6).7 (10) 1.01 (5.5) 3.13 (79.5) 6.85 (17) 7.85 (199.5).95 (75) 10 7.85 (199.5) 11.6 (9) 1 1 3-position vlve (E73..) -position vlve with 1 solenoid (73, D73, E73...) 3 -position vlve with 1 solenoid (Y73, E73...) lug for vlves with one solenoid 5.1 Solenoid "" (plug-in connector color gry) 5. Solenoid "" (plug-in connector color lck) 6 rotected mnul override N9 Mnul override cn only e operted up to tnk pressure of pprox. 75 SI (50 r). void dmge to the override! 7.1 lug-in connector DIN 3 650 1) (cn e rotted in 90 increments) 1 7. lug-in connector with optionl light/ rectifier DIN 3 650 1) (cn e rotted in 90 increments) 8 Spce required to remove plug 9 Nmeplte 10 R-ring 0.51 in x 0.063 in x 0.079 in (13 mm x 1.6 mm x mm) For vlves with port orifice: O-ring 0.7 in x 0.079 in (1 mm x mm) 11 orting pttern DIN 30 form, ISO 01 nd CEO R 11 H 1 Spce required to remove solenoid 13 dditionl connection () cn e optionlly used with mnifolds where this connection is required. 1 Hnd nut, tightening nut M = 5.9 ±1.8 l-ft (8 ±Nm) 3 1 0.000/.0 in 0.01/100 mm 3 (R mx ) Required surfce finish of mting piece Supltes G 66/1 (SE-8; 3/-16) G 67/1 (SE-10; 7/8-1) G 53/1 (SE-1; 1-1/16-1) Must e ordered seprtely, see R 5 05 Vlve mounting olts ) 1/-0 UNC x 1-1/ M6 x 1.58 (0) DIN 91-10.9, socket hed cp screws M = 11. l-ft (15.5 Nm) 1) must e ordered seprtely Rexroth Hydrulics 8/10.WE 73
Ordering detils: ville spre prts nd sels R 3 183/06.98 Nominl size 6 160 157 Nominl size 10 160 157 Spre prts solenoid os. Description 157 Coil for single connection 160 Sel kit nut for pole tue with protected hnd override Nominl size 6 Nominl size 10 rt rt Voltges numer Voltges numer 1 V 0001388 1 V 0001979 V 0001389 V 00019793 0006860 00835976 Sel kit vlve: Nominl size 6 os. Sel prt rt numer NR sels 0031316 FM sels 00313163 Sel kit vlve: Nominl size 10 os. Sel prt rt numer NR sels 003158 FM sels 0031583.WE 73 9/10 Rexroth Hydrulics
R 3 183/06.98 Notes Mnnesmnn Rexroth Corportion Rexroth Hydrulics Div., Industril, 315 City Line Rod, ethlehem, 18017-131 el. (610) 69-8300 Fx: (610) 69-867 Rexroth Hydrulics Div., Moile, 1700 Old Mnsfield Rod, Wooster, OH 691-039 el. (330) 63-300 Fx: (330) 63-3333 ll rights reserved Suject to revision rinted in U.S.. 10/10.WE 73