Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming
Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven, inclusive of centrifugal serie named TMP and the self-priming volumetric execution named TMA of the ALIFTER range. Single stage, close-coupled execution, strongly built through an injection-moulding process and ready to fit normalized motors. Argal operates with ISO 1: Quality System certified by SQS-IQNet. ATEX View of TMP and TMA pumps in different materials. TMP PUMPS SERIE The pumps of the TMP serie, magnetically driven, have been developed following the idea of previous AM serie, but trying to give a more concise answer to the actual demands of the market. These pumps are centrifugal, horizontal axis, close-coupled types, the bodies are entirely built with reinforced thermoplastic polymers, and materials for internal components are: ceramic oxides, HD carbon, fluorinated elastomers: which mean any contact of metallic parts with the pumped fluid is avoided. This combination of materials is correctly chosen to obtain the best in the performances and on a small scale: chemical pumps. MAIN FEATURES Versatility and performances. You can practically pump all the chemicals at low and medium temperatures with all the bodies in GFR-PP (glass fibre reinforced polypropylene) or CFF-E-CTFE (Etylene-ChloroTrifluoroEtylene carbon fibre filled). Strong magnetic coupling made up of rare-earth materials (Neodimium Iron Boron) and N (standard), P (powered) or S (strong-powered) versions allow to pump, also at maximum flow, liquids with 1. - 1. - 1. specific gravity respectively. R-N-X: three internal configuration of constructive materials for many applications: from clean water to waste and slightly abrasive liquids, strong alkali or salts such as sodium hypochlorite, and acids such as chromic, nitric, sulphuric, etc.. Hermetic pump The outlet magnet assembly driven by the motor shaft, produces a magnetic torque dragging up in rotation the inside magnet assembly on which the impeller is over moulded. The rear casing, having appropriate shape and joined to the volute casing, divides the two magnetic units, making an hermetic case all around the impeller. Safety and life The drive magnetic system finally excludes any type of rotating seal. The only need of the seal is guaranteed thanks to an O-ring static gasket, in the connection between volute casing and rear casing. Special solutions and employed materials occasionally allow dry running operation (starting from 1 min. up to many hours in function of working conditions), avoiding any damages inside the TMP pumps. These solutions require an internal structure R. is member of
TMP 1 U.S. gpm 1 1 1 General Performance Curve r.p.m. - Hz 1 General Performance Curve r.p.m. - Hz 1 1 Head (m) Head (ft)..11...1..11 1. m /h 1 1 1 1 1 1 Capacity 1 1 1 1 L/1 NOTES: All curves are referred to: water at C - viscosity 1 E - specific gravity 1 kg/dm pt THE MATERIALS table 1 VERSION REINFORCED POLYMERS MIN. TEMP. MAX TEMP. ENVIRONMENT TEMP. WR GFR/PP - C ( F) C (1 F) C (1 1 F) GF GX* CFF/E-CTFE - C (- F) 1 C (1 F) - C (- 1 F) Note: Maximum inlet pressure: 1, bar - (*) Compliant to ATEX //EC regulations THE CONSTRUCTIONS table VERSION WR GF GX* R1 X1 N1 R X N R N Volute casing Rear casing Centrifugal impeller Guide bushing CARB.HD GFR-PP SiC GFR-PTFE CARB.HD SiC CFF-E-CTFE GFR-PTFE CARB.HD GFR-PTFE Shaft Thrust bush CER SiC OR gasket FKM (1) FKM (1) () Screws Stainless steel Upon request:(1)epdm and () FFKM - * Compliant to ATEX //EC regulations TMP - SECTION VIEW 1 - Volute casing 1 - - - - Centrifugal impeller (covered type) Centrifugal impeller (magnetic part) Guide bushings Rear casing - - - OR gasket Drive magnet assembly Bracket
TMA The self priming, magnetic drive pumps of the TMA serie are volumetric, can deliver the flow in both directions reversing the direction of rotation of the motor and are adequate to speedily prime chemical liquids with high specific gravity and/or high vapour tension. OPERTAING PRINCIPLES OF THE PUMP MAIN FEATURES Start-up with empty pipes Fast priming-phase Maximum Lift = - m Reversible (inlet-outlet reversal) Suitable for specific weight up to kg/dm Suitable for vapour pressure up to 1 m (HO @ C) Minimum NPSHa (available on the plant) = m (abs) Impeller replaceable apart from magnets IEC or NEMA standard motors can be installed Stopping phase: a small quantity of liquid is trapped into the pump to enable the next starting. Priming phase: the impeller gives a specific circulation of air-liquid mixture moving air from the suction pipe to the discharge side in the atmosphere. Pumping phase: after the air is totally removed from the suction side, the pipe is flooded by the liquid and the pumping phase can start. 1 1 1 1 1,,,,, 1.1 Performance Curve r.p.m. - Hz,,,, 1 1, 1, 1, 1,,,,,,, 1 1, 1, 1, 1,,,,,, 1 1 1.1 Performance Curve r.p.m. - Hz,,,, 1 1, 1, 1, 1,,,,,,,,,,,, 1 1, 1, 1, 1,,,,,, PRIMING-TIME (sec) 1 1 PRIMING TIME WITH WATER -1-1, - -, - -, - -, - LIFT (m) THE MATERIALS table VERSION REINFORCED POLYMERS MIN. TEMP. MAX TEMP. ENVIRONMENT TEMP. WR GFR/PP - C ( F) C (1 F) C (1 1 F) GF CFF/E-CTFE - C (- F) C (1 F) - C (- 1 F) Note: Maximum inlet pressure: 1, bar THE CONSTRUCTIONS table VERSION WR GF R1 X1 N1 R X N Volute casing Rear casing Centrifugal impeller Guide bushing CARB.HD GFR-PP SiC GFR-PTFE CARB.HD CFF-E-CTFE SiC GFR-PTFE Shaft Thrust bush CER SiC OR gasket FKM (1) FKM (1) () Screws Stainless steel Upon request:(1)epdm and () FFKM TMA - SECTION VIEW 1 - Connections casing - - Impeller Magnetic core 1 - - Front volute casing Rear casing - - OR gasket Drive magnet assembly - Bracket - Filling plug
TMP - TMA PUMP SPECIFICATIONS table Connections TMP TMA Thread....11...1.11 1.1 1.1 DeM BSP-NPT / m 1 m 1 1/ m 1 1/ m / f DeA BSP-NPT / f 1 m 1 1/ m 1 1/ m / f Flange DnM-DnA ISO DnM-DnA ANSI 1 1 1/ 1 1/ 1 MOTOR SPECIFICATIONS Hz models table....1 1.1 N P S N P S N P S N P S N P S Power (IEC) Hz kw.1.......... 1.1.. 1.1 Motor size IEC A B 1A B 1A 1B 1A 1B A 1B A B 1B A B Phases N. phase - 1phase Std. voltage (IEC) V ± % Hz - ± % Hz Motor protection IP MOTOR SPECIFICATIONS Hz models table..11..11 1.1 N P S N P S N P S N P S N P S Power (IEC) Hz kw........ 1.1. 1.1. 1.1 Motor size IEC B 1A 1B 1A 1B A 1B A B A B A B Phases N. phase - 1phase Std. voltage (IEC) V ± 1% Hz - ± 1% Hz Motor protection IP WEIGHT -Hz models table Pump weight (without motor) Motor weight WR GF GX Version IEC phase - 1phase Frame A B 1A 1B A B 1, - (,*) - (*) Kg,,,, 1, 1 * Weight referred to TMA TMP pumps in WR execution TMA pump and trolley.1 -.11. -.. -.11. -. PUMP IDENTIFICATION LABEL table TMP. WR V R1 B E N Prima - Alifter range chosen model EXEC. N=normal P=powered S=strong-pow. see materials and construction V = FKM E = EPDM K = FFKM see materials and construction B = thr. BSP N = thr. NPT Z = flanged ISO-ANSI-JIS ISO-ANSI-JIS E = IEC U = NEMA N = Std. S = Spec. V. E = Ex-proof O = No motor = phase 1 = 1 phase SERIE MODEL EXECUTION VERSION O-ring INTERNAL CONNECTION MATERIALS STRUCTURE STANDARD MOTOR DATA MOTOR MOTOR PHASES TMP.. N WR V N1 B E N TMA...1.11..11 P GF E R1 X1 N N U S 1 S GX 1.1 1.1 only TMP K R X Z E O
TMP. r.p.m. - Hz,,, 1, 1 1,,,,,,,1,1,1, 1 1,,,,.1 1 1 r.p.m. - Hz 1,,, 1 1,,,,, 1 1. 11 1 r.p.m. - Hz,,, 1 1,,,,1,1 1. 1 1 r.p.m. - Hz 1,,, 1,,,,1,1 1. 1 r.p.m. - Hz 1 1 1,,,,, 1 1.11 1 r.p.m. - Hz 1 1 1 1,,,,, 1,,,,,,. 1 1 r.p.m. - Hz 1 1,,, 1 1,,,,,, 1 1.11 1 r.p.m. - Hz 1 1 1 1 1 1,,,,, 1 1,,, ATEX TMP. model GX execution with ff flange Labels in this catalog GFR/PP Glass fibre reinforced Polypropylene (%) EPDM Etylene-Propylene rubber CFF/E-CTFE Etylene-Chloro Trifluoro Ethylene carbon fibre filled (%) BSP - m BSP parallel threaded male connect. (according to ISO /1) CARB. H.D. Carbon hight density NPT - m Threaded male NPT connections SiC Silicon Carbide ND Nominal diameter CER Alumina ceramic at,% ISO Ref. Flange ISO - NP1 GFR/PTFE Glass fibre reinforced PTFE ANSI Ref. Flange ANSI B 1. Flat Face FKM Fluorine elastomer IEC According to E.C. motors FFKM Perfluorelastomer NEMA Accordind to U.S. motors
TMP - TMA TMP serie d x z KM DnM L a1 a1.1 a1 Q DeM, d x z h h.1 KA HD h1 DeA DnA, n1 s m1 r r1 rb B h L s B L1 DIMENSIONS WITH IEC MOTORS table TMP Hz TMP Hz TMA HZ TMA HZ....1..11..11 1.1 1.1 N P S N P S N P S N P S N P S N P S N P S N P S N P S N P S a1,, a1.1 Q 11 11 h 1 1 1 1 1 1 1 1 1 1 h.1 1 1 1 1 1 1 1 1 L(*) h1 1 1 1 1 1 1 1 1 1 1 1 1 1 HD(*) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 m1 1 1 1 1 1 1 1 1 1 1 1 1 n1 1 1 11 1 11 11 11 11 1 11 1 1 1 11 11 11 11 1 11 1 1 1 1 11 1 1 11 1 1 r1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 r 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 rb 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 s 1 1 1 1 1 1 1 1 1 1 1 1 B B L1 L 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 h s 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 dxz K TMA serie DN DN Q DN L r1 a1 / F h1 h1 HD h h n1 s1 m1 r rb B h L s B L1
Member of AIB associazione industriale Bresciana Via Labirinto, 1-1 BRESCIA - ITALY Tel. +..11 - Fax +.. - Export dpt. Tel. +.. Web: www.argal.it - E-mail: export@argal.it It is the policy of ARGAL to always improve its products and the right is reserved to alter specifications at any time without prior notice. No part of this publication may be reproduced in any form or any means.