Technical Note Burst Energy Release Index. S. P. Singh. Introduction

Similar documents
Analysis of a potential coalburst phenomenon in different strata layers in underground coal mines

NUMERICAL MODELING OF BRITTLE ROCK FAILURE UNDER DYNAMIC STRESS LOADING. N. Golchinfar and M. Cai

ISMS Paper No Influence of weak planes on rockburst occurrence. Amin Manouchehrian, Ming Cai *

STRESS DROP AS A RESULT OF SPLITTING, BRITTLE AND TRANSITIONAL FAULTING OF ROCK SAMPLES IN UNIAXIAL AND TRIAXIAL COMPRESSION TESTS

SYLLABUS AND REFERENCES FOR THE STRATA CONTROL CERTIFICATE. METALLIFEROUS MINING OPTION Updated November 1998

Practical guidelines for strain burst hazard awareness for development miners

MEMORANDUM SUBJECT: CERTIFICATE IN ROCK MECHANICS PAPER 1 : THEORY SUBJECT CODE: COMRMC MODERATOR: H YILMAZ EXAMINATION DATE: OCTOBER 2017 TIME:

FIRST INTERNATIONAL SEMINAR DEEP AND HIGH STRESS MINING 6-8 NOVEMBER 2002 PERTH, AUSTRALIA. Potential. T. Wiles Mine Modelling Pty Ltd, Australia

Failure and Failure Theories for Anisotropic Rocks

Rock Material. Chapter 3 ROCK MATERIAL HOMOGENEITY AND INHOMOGENEITY CLASSIFICATION OF ROCK MATERIAL

SEISMIC PEAK PARTCILE VELOCITY AND ACCELERATION RESPONSE TO MINING FACES FIRING IN A LIGHT OF NUMERICAL MODELING AND UNDERGROUND MEASUREMENTS

Behaviour of Blast-Induced Damaged Zone Around Underground Excavations in Hard Rock Mass Problem statement Objectives

Analysis of rock burst in critical section of second part of Karaj- Tehran Water Supply Tunnel

Ground Support in Mining and Underground Construction

Experiments on Rock Burst and its Control

Underground Excavation Design Classification

The Mine Geostress Testing Methods and Design

Tectonic stress environment of coal-rock dynamic hazard in Kailuan mining area, China

Seismic analysis of horseshoe tunnels under dynamic loads due to earthquakes

Challenges and Innovations in Site investigation, Ground Behaviour Prediction and Risk Assessment for Deep Hard Rock Tunnels

Section Forces Within Earth. 8 th Grade Earth & Space Science - Class Notes

Section 19.1: Forces Within Earth Section 19.2: Seismic Waves and Earth s Interior Section 19.3: Measuring and Locating.

Establishing a Methodology for the Assessment of Remnant Stability Using Recorded Seismic Events on Harmony Mines

Aspects of time-dependent deformation in hard rock at great depth

iii On a personal note, I would like to thank my valued friend Suzanne for her support and motivation.

Seismic Analysis Without Seismic Data. The relevance of ground observation for seismic interpretation.

Earthquake. What is it? Can we predict it?

Flin Flon Mining Belt

Design considerations for pillar systems in deep mines. Tobias Ladinig Hannes Blaha Horst Wagner

Influence of specimen dimensions on bursting behaviour of rocks under true triaxial loading condition

ME 2570 MECHANICS OF MATERIALS

Effects of Confining Stress on the Post-Peak Behaviour and Fracture Angle of Fauske Marble and Iddefjord Granite

ENGINEERING GEOLOGY AND ROCK ENGINEERING

Weak Rock - Controlling Ground Deformations

Module 9 : Foundation on rocks. Content

Earthquakes. Forces Within Eartth. Faults form when the forces acting on rock exceed the rock s strength.

Dynamic Rock Failures Due to High Stress at Shallow Depth

The effect of discontinuities on strength of rock samples

STRENGTH PROPERTIES OF ROCKS AND ROCK MASSES 4. FAILURE CRITERIA FOR INTACT ROCKS AND ROCK MASSES

Shear rupture two case studies from a deep mine

Further Research into Methods of Analysing the October 2000 Stability of Deep Open Pit Mines EXECUTIVE SUMMARY

RETROSPECTIVE ANALYSIS OF MINE SEISMICITY: GLENCORE, KIDD MINE. Sandra V. L. Smith

APPLICATION OF PPV METHOD FOR THE ASSESSMENT OF STABILITY HAZARD OF UNDERGROUND EXCAVATIONS SUBJECTED TO ROCK MASS TREMORS

Mohr's Circle and Earth Stress (The Elastic Earth)

Rock slope failure along non persistent joints insights from fracture mechanics approach

An introduction to the Rock Mass index (RMi) and its applications

STABILITY CHECK AND SUPPORT DESIGNING FOR THE GR-2011 EXPLORATION DRIFT

SYLLABUS AND REFERENCES FOR THE STRATA CONTROL CERTIFICATE COAL MINING OPTION

Numerical investigation of EDZ development around a deep polymetallic ore mine

Introduction and Background

The effect of discontinuities on stability of rock blocks in tunnel

Geotechnical & Mining Engineering Services

Rockburst mitigation experiences on underground projects in the Cheves Hydropower project in the Peruvian Andes

Research Article Experimental Investigation on Creep Deformation Behavior of Medium-strength Marble Rock

Longwall Caving in Potash Mining Geomechanical Assessment of Damage and Barrier Integrity

Effect of Faults on Rockbursts Hazard

Swelling Pressure Due to volumetric Expansion of a rock mass having swelling minerals when comes in contact with water

Causes of Dynamic Overbreak and Control Measures Taken at the Alborz Tunnel, Iran

Digital Research Space of Induced Seismicity for EPOS Purposes (IS-EPOS project)

Application of a transversely isotropic brittle rock mass model in roof support design

Module 5: Failure Criteria of Rock and Rock masses. Contents Hydrostatic compression Deviatoric compression

EXAMINATION PAPER MEMORANDUM

3D ANALYSIS OF STRESSES AROUND AN UNLINED TUNNEL IN ROCK SUBJECTED TO HIGH HORIZONTAL STRESSES

Three-Dimensional Failure Criteria Based on the Hoek Brown Criterion

Nonlinear rock behaviour and its implications on deeper-level platinum mining

An Experimental Characterization of the Non-linear Rheology of Rock

DEVELOPMENT OF DATA SETS ON JOINT CHARACTERISTICS AND CONSIDERATION OF ASSOCIATED INSTABILITY FOR A TYPICAL SOUTH AFRICAN GOLD MINE

Numerical Approach to Predict the Strength of St. Peter Sandstone Pillars acted upon by Vertical Loads A case study at Clayton, IA, USA.

Aspects of the Seismic Response to Shaft Pillar Mining - Case Studies in the Welkom Gold Field

Damage-free coring technique for rock mass under high in-situ stresses

Estimating the Probability of Mining-Induced Seismic Events Using Mine-Scale, Inelastic Numerical Models

INFLUENCE OF WATER-SOAKING TIME ON THE ACOUSTIC EMISSION CHARACTERISTICS AND SPATIAL FRACTAL DIMENSIONS OF COAL UNDER UNIAXIAL COMPRESSION

Prevention and Control of Rockbursts in Dongguashan Copper Mine

Effect of intermediate principal stresses on compressive strength of Phra Wihan sandstone

DEVELOPMENT OF AUTOMATIC CONTROL OF MULTI-STAGE TRIAXIAL TESTS AT THE UNIVERSITY OF MISKOLC

A NEW ROCK BOLT CONCEPT FOR UNDERGROUND EXCAVATIONS UNDER HIGH STRESS CONDITIONS

A Phenomenological Model of Brittle Rocks under Uniaxial Compression

Understanding hydraulic fracture variability through a penny shaped crack model for pre-rupture faults

THE APPLICATION OF SHORT ROCKBOLTS IN ULTRADEEP TABULAR STOPING

Research Article Microseismic Monitoring and Numerical Simulation of Rock Slope Failure

Objectives. Vocabulary

ON THE FACE STABILITY OF TUNNELS IN WEAK ROCKS

Evaluation of Engineering Properties of Rock Using Ultrasonic Pulse Velocity and Uniaxial Compressive Strength

Supplementary Uniaxial Compressive Strength Testing of DGR-3 and DGR-4 Core

Trials of the Garford hybrid dynamic bolt reinforcement system at a deeplevel gold mine in South Africa

The importance of both geological structures and mining induced stress fractures on the hangingwall stability in a deep level gold mine

UGRC 144 Science and Technology in Our Lives/Geohazards

Numerical models on anisotropy of rocks

IMPROVING THE MINING EFFICIENCIES BY MEANS OF A NEW SUPPORT DESIGN AT UNISEL MINE. AMMSA Annual General Meeting 1 December 2017

ROCK MASS PROPERTIES FOR TUNNELLING

ROCKENG09: Proceedings of the 3rd CANUS Rock Mechanics Symposium, Toronto, May 2009 (Ed: M.Diederichs and G. Grasselli)

The effect of dip of joints on the axial force of rock bolts

Introduction to Engineering Materials ENGR2000. Dr. Coates

In-situ Experiments on Excavation Disturbance in JNC s Geoscientific Research Programme

Pillar strength estimates for foliated and inclined pillars in schistose material

Numerical analysis of ground motion in a South African mine using SPECFEM3D

PLANES OF WEAKNESS IN ROCKS, ROCK FRCTURES AND FRACTURED ROCK. Contents

A preliminary study of dynamic failures in laboratory tests

Resolving sill pillar stress behaviour associated with blasts and rockbursts

Calculation of periodic roof weighting interval in longwall mining using finite element method

Transcription:

Rock Mechanics and Rock Engineering 21, 149--155 (1988) Rock Mechanics and Rock Engineering 9 by Springer-Verlag 1988 Technical Note Burst Energy Release Index By S. P. Singh School of Engineering, Laurentian University, Sudbury, Ontario, Canada Introduction The rockburst is a sudden manifestation of the release of strain energy stored in the rock mass. Three possible sources for the liberated energy are (Salamon, 1983) 1. Stored strain energy in the surrounding mass. 2. Change in the potential energy of the rock mass. 3. Minor slippage along rock contacts. This study has focussed on the rock's capacity to store and release elastic strain energy. It is noteworthy however that in addition to rock type, a large excavation at depth andor unfavorable geological features are also necessary to cause serious bursting conditions. Rockburst is an energy phenomenon accompanying rock failure in form of brittle fracture induced by mining (C o o k, 1966). Rockbursts in deep hard rock mines provide graphic illustrations of the phenomenon of explosive brittle fracture (H o ek and Brown, 198). Energy changes occur during the course of mining acitivities and a part of the energy is stored in the rock mass surrounding the excavation (Salamon, 1983). The ultimate stress state is created by the action of the pre-mining and mining induced stresses. The changes brought about by mining merely trigger latent seismic events that derive mainly from the strain energy produced by geological differences in the state of stress (Co ok, 1983). The only feature common to most of the rockbursts is that rock failure is sudden and the strain energy is released from a volume of stresssed rock (Ortlepp, 1983). The purpose of this study was to search for a parameter, which represents the energy released at the time of rock fracture and which can be used as a relative measure of the burst proneness of rocks. The study was conducted on rocks from "Sudbury Nickel Belt" in Canada.

15 S.P. Singh: Energy Released During Fracture The important feature of a rockburst is the violent fracture of the rock which accompanies the release of energy in amounts sufficient to damage the surroundings. This suggests the search for a parameter which represents the energy released at the time of rock fracture and which can be used as a relative measure of the burst proneness of rocks. It has been proposed by P e t u k h o v (1957) that the violent fracture of a rock specimen in a soft testing machine represents a laboratory simulation of the dynamic fracture of the stressed rock during a burst in a mine. In this context, the rock mass being fractured around an excavation behaves as a rock specimen and the strata surrounding this rock mass acts as a testing machine. The violent nature of the specimen fracture in the soft testing machine satisfies the necessary conditions for the occurrence of the rockbursts which have been depicted in Fig. 1. CONDITIONS FOR ROCKBURST ULTIMATE STRESS CONDITION CAUSED BY - Gravity loading -Mining induced stresses -Stresses due to previous temperature loading conditions - S t r e s s e s due to faulting, folding, metamorphism, etc. - Favourable rock characteristics CONDITION OF INSTABILITY CAUSED BY -Sudden stress change of sizeable magnitude -Discontinuous rock mass -Rocks in strain softening state -Some support system on the verge of coltapse -Geological discontinuities SOURCE OF SUFFICIENT ENERGY DUE TO THE ORK DONE BY -Mining induced stresses -Gravitational forces - Tectonic forces Fig. 1. Conditions for the occurrence of rockbursts In the light of the above discussion, the amount of energy released by rock specimens during their failure in a soft testing machine was determined by the extent of the vibrations generated in the machine. The vibrations were measured by a seismograph. The information of particular interest in this study was the vector sum of the peak particle velocities of the vibrations in the vertical, longitudinal and transverse directions. The vector sum is a measure of the energy released at the time of specimen fracture and will be referred to as "Burst Energy Release Index" (BERI) in this paper. The experimental set up is shown in Fig. 2. Burst Proneness Index (q): This was determined from the elastic hysterisis loop parameters in the uniaxial compression loading and unloading tests (Fig. 3). The ratio of the strain energy retained, ER, to the

EXTENSOMETEP. Burst Energy Release Index 151 l... L L I I" X-Y PLOTTER SEISMOGRAPH '~ P NON-STIFF TESTING MACHINE SAMPLE GEOPHONE Fig. 2. Experimental set up for determining the "Burst Energy Release Index" permanent strain energy, ED, provided the numerical value for the Burst Proneness Index (Peng, 1978; Kidbinski, 1981; Singh, 1986). 2, 161 no O9 "~ LLI n," I-- u') 12 8 4!iiii!iiiiii!ii!iiiiiiiiiii 9 ~i~i~i~!~it.~iiiiii!i~iiiiiiiii!i~iil..ii!ili!ii!i!iiiiiiiiiii:!:iiii?ii:l I 5 I.I.;i!i!i?iiil :!i!~i~i~ii!i!.:!i!iiiiii!iiiii?!il ::i?ii!i~iii~i!!i!iii?l 15 2 25 STRAIN! -~ Fig. 3. Typical stress-strain curve for loading and unloading during uniaxial compression test I The values for compressive strength and the strain energy stored in the specimen up to failure were obtained by uniaxial compression test.

152 S.P. Singh: Results and Discussion The results for Onaping Norite, Creighton Granite and Schistose are presented in Table 1. It is of interest to examine the independence of the Burst Energy Release Index (BERI) and the Burst Proneness Index, the compressive strength and the strain energy stored in the specimen. Table 1. Burst Energy Release Index and Other Properties for Onaping Norite, Creighton Granite and Schistose Rock type Burst Energy Release Burst Proneness Compressive Energy store in the Index (BERI) Index (t) strength in MPa specimen in MJ Onaping Norite 1.83 14.3 154..146 1.61 1.3 165.8.175 1.29 5.9 145.6.173 1.56 6.8 152.2.274 3. 1.3 291.3.581 2.81 1.3 258.4.426 1.87 5. 24.4.356 1.82 8.7 178.2.298 Creighton Granite 1.57 5.8 138.4.187 2.13 6.2 186.9.383 1.61 5.9 154.7.221 1.65 8.1 176.1.299 1.57 5.8 175.2.477 2.48 12.4 249.6.661 Schistose 1.22 3. 95.7.118 1.72 1.8 17.5.189 1.99 3.1 145.3.17 2.18 6.3 167.4.253 1.44 1.9 15.5 O. 14 1.49 3. 113.7.133 1.65 3. 111.7.116 The bursts occur in mines where the rock has been stressed beyond its peak strength. The dependence of BERI upon the compressive strength of rocks is displayed in Fig. 4. Higher strength rocks contribute more to the problem of bursting, because they will accumulate large amounts of elastic strain energy prior to failure. The increase of BERI with the increase in the Burst Proneness Index is shown in Fig. 5. BERI is a measure of the energy released at the time of specimen fracture whereas Burst Proneness Index is an indicator of the rock's ability to store recoverable and irrecoverable strain energy. The linear relation between the two parameters indicates that they can be similarly related to rockbursting. The correlation between the BERI and the strain energy stored in the specimen is displayed in Fig. 6. The higher the maximum strain energy that can be stored in a given rock the more likely it will be subject to bursting. The amount of energy that a particular rock can release during fracture is a reliable indicator of its burst proneness because the source of

Burst Energy Release Index ]53 X LLI r"', (9 hi I- ra r~ m 3.2 3. 2.8 2.6 2.4 2.2 2. 1.8 1.6 IA- ONAPING NORITE ~ CREIGHTON GRANITE D SCHISTOSE =~, ~ o,~ ~o ~ A 1.2 I I 5 I 15 2 2_5 3 COMPRESSIVE STRENGTH (MPo) t o Fig. 4. Burst Energy Release Index vs. compressive strength O 3.2_ :3. X 1.1..I o 2.8 uj 2,6 (3 ( hi nr )- (.9 2.4 2.2 2. 1.8 CO rr" D 1.6 era 1.4 1.2 NAPING NORiTE A CREIGHTON GRANITE O SCHISTOSE o O~o j 13 ~" " o I El I I 2 4 6 " J 7 r,,, 1'6 1'8 ' 8 I 12 14 2 BURST PRONENESS INDEX ('r) Fig. 5. Burst Energy Release Index vs. Burst Proneness Index seismic energy released by a burst is the strain energy stored in the rock prior to fracture. The analysis of the results provides enough confidence to use BERI as a relative measure to define the burst proneness of rocks.

154 S.P. Singh: X (r >- (.9 ILl I" 9 tw m 32 3. 2.8 2.6 2.4 2.2 2. 1.8 1.6 1.4 1,2 o ONAPING NORITE A CREIGHTON GRANITE o SCHISTOSE o o 4 ~ o A O A o in I, I I I p I I I o.zoo.4.6 o.eoo l.ooo STORED ENERGY (MJ) Fig. 6. Burst Energy Release Index vs. strain energy stored in the specimen A However, it depends on the particular testing conditions. The comparison between BERI values for different rocks is only possible as long as the tests have been performed on the same machine or different machines with same stiffness and unloading characteristics. Conclusions Rockbursts occur under certain combinations of geologic and mining conditions. It is possible to assess burst prone rocks utilizing BERI during the planning, design and operating stages of the mine. The simplicity of the approach may encourage its use as a quantitative predictor in investigations on rockbursts. Acknowledgements The author wishes to thank NSERC for the funding through grant number A4945 and the mining companies in the Sudbury area for their assistance during this study. References C o o k, N. G.. (1983): Origin of rockbursts. Proc. Rockburst Prediction and Control, IMM, London, 1--9.

Burst Energy Release Index 155 C o o k, N. G.. (1966): The basic mechanics of rockbursts. J. South African Inst. Mining and Metallurgy, vol. 66, 56--7. Hoek, E., Brown, E. T. (198): Underground Excavations in Rock. IMM, London, 131--182. Jaeger, J. C., Cook, N. G.. (1969): Fundamentals of Rock Mechanics. London: Chapman and Hall. Kidbinski, A. (1981): Bursting liability indices of coal. Int. J. Rock Mech. Min. Sci. 18, 295--34. Ortlepp,. D. (1983): The mechanics and control of rockbursts. Rock Mechanics in Mining Practice, Ch. 12. S. Budavari (ed.), SAIMM' Johannesburg, 257--282. Peng, S. S. (1978): Coal Mine Ground Control. New York: John iley. Petukhov, I. M. (1957): Rockbursts in Kizel Coalfield Mines (in Russian), Perm. Publ., Perm, 143. S a 1 a m o n, M. D. G. (1983): Rockburst hazard and the fight for its alleviation in South African gold mines. Proc. Rockbursts Prediction and Control, IMM, London, 11--35. Singh, S. P. (1986): Assessment of the rockburst proneness in hard rock mines. Proc. 5th Conf. on Ground Control in Mining, est Virginia University, Morgantown, 242--248.