Certificate of non-use of The Controlled Substances Company name Littelfuse, Inc. Product Covered SIDACtor, QFN Package PLED, QFN Package Issue Date February 8, 2014 It is hereby certified by Littelfuse, Inc., that there is neither RoHS (EU Directive 2011/65/EU)-restricted substance nor such use, for materials to be used for unit parts, for packing/packaging materials, and for additives and the like in the manufacturing processes. It is also certified by Littelfuse, Inc., that the products listed in this report do not contain Halogens and their compounds judged per widely accepted industrial guidelines. In addition, it is hereby reported to you that the parts and sub-materials, the materials to be used for unit parts, the packing/packaging materials, and the additives and the like in the manufacturing processes, are all composed of the following components. Issued by (1) Parts, sub-materials and unit parts [Global EHS Engineer] This document covers SIDACtor & PLED QFN Package supplied by Littelfuse, Inc. Please see page 2-4 for the complete list of part number covered by this report. <Homogeneous Materials used> Please see figure and table 1 on page 5 and table 2 on page 6 of this document. (2) The analytical data on all measurable substances Please see pages 6-57, attached to this document. Remarks: 1. Pb (lead) contained in die bonding solder (item 8 on page 47-57) and passivation glass (item 7 on page 40-46) to be categorized as exempt in RoHS Annex III 7(a) and 7(c)-I. Please refer to last page of this report for the extract of the applicable exemptions of RoHS (EU Directive 2011/65/EU). Littelfuse, Inc. Page 1
Littelfuse Part Number covered by this report SIDACtor QFN package products supplied by Littelfuse are categorized into three groups by Pb (lead) contents due to their design. All products use the same raw materials and all products listed in this report meet RoHS requirement by using lead (Pb) exemptions. Please follow table below to locate specific part number and its material breakdown. Group # Package Generic Description P/N table 1 QFN 3mm x 3mm x 1mm (2-leaded) SIDACtor PxxxxQ12ALRP PxxxxQ12BLRP SDP0242Q12FLRP PLED PLEDxxQ12 PLEDxxUQ12 See page 3 2 QFN 3.3mm x 3.3mm x 1mm (2-leaded) SIDACtor PxxxxQ22CLRP See page 3 3 QFN 5mm x 6mm x 1.5mm (8-leaded) SIDACtor SDPxxxxQ38B SDPxxxxQ38CB SEPxxxxQ38CB See page 4 Littelfuse, Inc. Page 2
GROUP 1: QFN 3mm x 3mm x 1mm Standard (Catalog) Part Number PLED6Q12 P0900Q12ALRP P0720Q12BLRP PLED9Q12 P1100Q12ALRP P0900Q12BLRP PLED13Q12 P1200Q12ALRP P1100Q12BLRP PLED18Q12 P1300Q12ALRP P1200Q12BLRP P1500Q12ALRP P1300Q12BLRP PLED6UQ12 P1800Q12ALRP P1500Q12BLRP PLED9UQ12 P2000Q12ALRP P1800Q12BLRP PLED13UQ12 P2300Q12ALRP P2000Q12BLRP PLED18UQ12 P2500Q12ALRP P2300Q12BLRP P2600Q12ALRP P2500Q12BLRP P3100Q12ALRP P2600Q12BLRP P3500Q12ALRP P3100Q12BLRP P0080Q12ALRP P3500Q12BLRP P0300Q12ALRP P0080Q12BLRP P0640Q12ALRP P0300Q12BLRP SDP0242Q12FLRP P0720Q12ALRP P0640Q12BLRP SPECIAL DEVICE P/N Any Special P/N that has base standard P/N listed in this table. GROUP 2: QFN 3.3mm x 3.3mm x 1mm Standard (Catalog) Part Number P0080Q22CLRP P1101Q22CLRP P2500Q22CLRP P0300Q22CLRP P1200Q22CLRP P2600Q22CLRP P0640Q22CLRP P1300Q22CLRP P3100Q22CLRP P0641Q22CLRP P1301Q22CLRP P3500Q22CLRP P0720Q22CLRP P1500Q22CLRP P4500Q22SCLRP P0721Q22CLRP P1701Q22CLRP P0900Q22CLRP P1800Q22CLRP P0901Q22CLRP P2000Q22CLRP P1100Q22CLRP P2300Q22CLRP SPECIAL DEVICE P/N Any Special P/N that has base standard P/N listed in this table. Littelfuse, Inc. Page 3
GROUP 3: QFN 5mm x 6mm x 1.5mm Standard (Catalog) Part Number SDP0080Q38B SDP0080Q38CB SEP0080Q38CB SDP0640Q38B SDP0640Q38CB SEP0640Q38CB SDP0720Q38B SDP0720Q38CB SEP0720Q38CB SDP0900Q38B SDP0900Q38CB SEP0900Q38CB SPECIAL DEVICE P/N Any Special P/N that has base-standard P/N listed in this table. SDP1100Q38B SDP1300Q38B SDP1800Q38B SDP2600Q38B SDP3100Q38B SDP3500Q38B SDP1100Q38CB SDP1300Q38CB SDP1800Q38CB SDP2600Q38CB SDP3100Q38CB SDP3500Q38CB Littelfuse, Inc. Page 4
Part construction (cross section) 1 8 3 4 5,6 2 7 Material Used (where used) Table 1: Homogeneous Material Used # Description Name of Type Material 1 Molding compound epoxy resin plastic Page 7-14 2 Lead frame copper alloy metal Page 15-23 Pages 3 Copper Slug/ Spacer copper alloy metal Pages 24-27 (Applicable to QFN 5mmx6mmx1.5mm only) 4 Matte-Tin plating Tin metal Pages 28-33 tested as plating cathode (Tin ball) 5 Silicon die silicon metal 6 Nickel electrode nickel metal Pages 34-38, tested as Nickel-plated wafer. 7 Passivation glass glass glass Pages 39-45, Pb in this glass is exempted by RoHS Annex III 7(c)-I. 8 Die bonding solder solder metal A page 46-56, Pb in this solder is exempted by RoHS Annex III 7(a). 9 Annex 8: Applicable RoHS exemptions (2011/65/EU Annex III) Page 57 Littelfuse, Inc. Page 5
Table 2: RoHS-regulated substance in raw materials Components Analysis Result Cd Cadmium Cr Chromium Hg Mercury Pb Lead PBB PBDE Total Halogen As Component Total < 2ppm < 2ppm < 5ppm < 10ppm* 1 (7.0% *2 ) < 5ppm < 5ppm <50ppm Epoxy Resin compound (mixture of phenolix resin, epoxy resin, filler and non-brominated fire retardant) See Page 7-14 for the detail. Lead frame / Clip / Slug (Copper Alloy, CDA194) See Page 15-23, 24-27for the detail. Outside lead finish (Matte-Tin plated, Sn 100%) See Pages 28-33 for the detail. Silicon Die (Silicon + Ni electrode) See Pages 34-38 for the detail. Passivation Glass See Pages 39-45 for the detail. Die Bonding Solder (Pb/Sn=95/5) See Pages 46-56 for the detail. < 2ppm < 2ppm < 2ppm < 2ppm < 5ppm <5ppm < 50ppm < 2ppm < 2ppm < 2ppm < 2ppm < 5ppm < 5ppm < 50ppm < 2ppm < 2ppm < 2ppm < 2ppm < 5ppm < 5ppm < 50ppm < 2ppm < 2ppm < 2ppm 25ppm *3 < 5ppm < 5ppm <50ppm < 2ppm < 2ppm < 2ppm 31.2% *4 < 5ppm < 5ppm < 50ppm < 2ppm < 2ppm < 2ppm 92.5% *5 < 5ppm < 5ppm --- \ *1 Less than 10ppm Pb content overall, excluding Pb from the die bonding solder and the passivation glass on the silicon die. *2 Group 1 products: 7.0wt% or 2.0mg, Group 2 products: 6.8wt% or 2.3mg, Group 3 products: 5.6wt% or 8.0mg of Pb (lead) content overall including the RoHS-exempted use of Pb (lead) *3 Pb (lead) contained in silicon wafer is not exempted from restriction by RoHS, but considered as process contamination or naturally-occurring impurity in raw materials. Littelfuse does not add Pb (lead) intentionally. *4 Pb (lead) contained in passivation glass is exempted from restriction by RoHS Annex III 7(c)-I. *5 Pb (lead) contained in die bonding solder is exempted from restriction by RoHS Annex III 7(a). Please refer to last page of this report for the applicable exemptions of RoHS (EU Directive 2011/65/EU) Littelfuse, Inc. Page 6
Test Report REPORT NO. : CTSSA/01998-1/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 1 of 5 Littelfuse Philippines Inc. LIMA Technology Center, Lipa City, Hitachi Malvar, Chemical Batangas (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang The following merchandise was (were) submitted and identified by the client as: Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series Sample Receiving Date : 03/02/2014 Testing Period : 03/02/2014 to 07/02/2014 Date Completed : 07/02/2014 Reporting Date : 24/02/2014 Test Result : Please see the next page Analysts : Ng Jing Wei, Cho Kar Yen, Tan Li Wei & Isabelle Chan Suet Yee SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-1/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 2 of 5 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series RoHS Directive 2011/65/EU Annex II Test Item (s) : Unit Method Instrument MDL Results Limit Chromium VI (Cr6+) ppm IEC 62321 : 2008 Annex C UV Vis - Spectrophotometer 2 N.D. 1000 Cadmium (Cd) ppm IEC 62321 : 2008 ICP OES 2 N.D. 100 Mercury (Hg) ppm IEC 62321 : 2008 ICP OES 2 N.D. 1000 Lead (Pb) ppm IEC 62321 : 2008 ICP OES 2 N.D. 1000 NOTE: (a) N.D. = Not detected (<MDL) (b) ppm = mg/kg (c) MDL= Method Detection Limit (d) Testing based on original basis Analysts: Ng Jing Wei & Cho Kar Yen SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-1/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 3 of 5 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series RoHS Directive 2011/65/EU Annex II Test Item (s) : Unit Method Instrument MDL Result Limit PBBs (Polybrominated Biphenyls) Monobromo Biphenyl Dibromo Biphenyl Tribromo Biphenyl Tetrabromo Biphenyl Pentabromo Biphenyl Hexabromo Biphenyl Heptabromo Biphenyl Octabromo Biphenyl Nonabromo Biphenyl Decabromo Biphenyl ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS GCMS GCMS GCMS GCMS GCMS GCMS GCMS GCMS GCMS 5 5 5 5 5 5 5 5 5 5 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. 1000 PBDEs (Polybrominated Diphenyl ethers) Monobromo Diphenyl Ether Dibromo Diphenyl Ether Tribromo Diphenyl Ether Tetrabromo Diphenyl Ether Pentabromo Diphenyl Ether Hexabromo Diphenyl Ether Heptabromo Diphenyl Ether Octabromo Diphenyl Ether Nonabromo Diphenyl Ether Decabromo Diphenyl Ether NOTE: ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm (a) N.D. = Not detected (<MDL) (b) ppm = mg/kg (c) MDL= Method Detection Limit GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS as per IEC 62321 : 2008 GCMS GCMS GCMS GCMS GCMS GCMS GCMS GCMS GCMS GCMS 5 5 5 5 5 5 5 5 5 5 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. 1000 Analysts: Tan Li Wei & Isabelle Chan Suet Yee SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-1/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 4 of 5 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series HITACHI CHEMICAL (M) SDN. BHD. CTSSA/01998-1/14 SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report 1. DETERMINATION OF CADMIUM CONTENT BY IEC 62321 2008 Sample Receiving and Registration Sample Preparation Weight sample (0.2-0.5g) into digestion vessel Acid digestion (Microwave) Totally Dissolved Filtration Analyses by ICP 3. DETERMINATION OF MERCURY CONTENT BY IEC 62321 2008 Sample Receiving and Registration Sample Preparation Weight sample (0.2-0.5g) into digestion vessel Acid digestion (Microwave) Totally Dissolved Filtration REPORT NO. : CTSSA/01998-1/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 5 of 5 2. DETERMINATION OF LEAD CONTENT BY IEC 62321 2008 Sample Receiving and Registration Sample Preparation Weight sample (0.2-0.5g) into digestion vessel Acid digestion (Microwave) Totally Dissolved Filtration Analyses by ICP 4. DETERMINATION OF HEXAVALENT CHROMIUM BY IEC 62321 2008 Sample Preparation Add colour-developing reagent Acidify with H 2SO 4 Let stand for 5-10 min Analyses by UV- Spectrophotometer (540 nm) Analyses by ICP 5. DETERMINATION OF PBB/PBDE WITH GC-MS BY IEC 62321 2008 Sample Preparation Weight sample (0.5-4.0g) into extraction thimble Soxhlet Extraction with Toluene Filter through 0.45 um membrane filter Analyses by GC-MS (with appropriate dilution) SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-3/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 1 of 4 Littelfuse Philippines Inc. LIMA Technology Center, Lipa City, Hitachi Malvar, Chemical Batangas (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang The following merchandise was (were) submitted and identified by the client as: Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series Sample Receiving Date : 03/02/2014 Testing Period : 03/02/2014 to 07/02/2014 Date Completed : 07/02/2014 Reporting Date : 24/02/2014 Test Result : Please see the next page Analyst : Teh Pui Sean SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-3/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 2 of 4 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series Test Item (s): Unit Method Result MDL Halogen --- --- --- --- Halogen-Fluorine (F) Halogen-Chlorine (Cl) Halogen-Bromine (Br) Halogen-Iodine (I) mg/kg mg/kg mg/kg mg/kg Note : (a) mg/kg = ppm (b) N.D. = Not Detected (c) MDL = Method Detection Limit (d) --- = Not Conducted (e) Testing based on original basis Analyst : Teh Pui Sean With reference to IEC 61189-2 Test 2C12 (Modified). Analysis was performed by IC method for Fluorine content. With reference to IEC 61189-2 Test 2C12 (Modified). Analysis was performed by IC method for Chlorine content. With reference to IEC 61189-2 Test 2C12 (Modified). Analysis was performed by IC method for Bromine content. With reference to IEC 61189-2 Test 2C12 (Modified). Analysis was performed by IC method for Iodine content. N.D. 50 65 50 N.D. 50 N.D. 50 SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-3/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 3 of 4 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series HITACHI CHEMICAL (M) SDN. BHD. CTSSA/01998-3/14 SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-3/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 4 of 4 DETERMINATION OF HALOGEN CONTENT Sample pretreatment Weighting and putting sample in cell Combustion / Absorption Dilution to fixed volume Analyses by IC SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-5/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 1 of 4 Littelfuse Philippines Inc. LIMA Technology Center, Lipa City, Hitachi Malvar, Chemical Batangas (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang The following merchandise was (were) submitted and identified by the client as: Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series Sample Receiving Date : 03/02/2014 Testing Period : 03/02/2014 to 07/02/2014 Date Completed : 07/02/2014 Reporting Date : 24/02/2014 Test Result : Please see the next page Analysts : Ng Jing Wei & Cho Kar Yen SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-5/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 2 of 4 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series Test Item (s): Unit Method Result MDL Antimony (Sb) ppm ICP-OES as per US EPA 3052 (acid digestion method) N.D. 2 NOTE: (a) N.D. = Not detected (<MDL) (b) ppm = mg/kg (c) MDL= Method Detection Limit (d) Testing based on original basis SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-5/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 3 of 4 Company : Hitachi Chemical (M) Sdn. Bhd. Plot 501, Prai Industrial Estate, 13600 Prai, Penang Test Result Sample Description : Epoxy Molding Compound Sample Name : CEL-9220HF 13 Series HITACHI CHEMICAL (M) SDN. BHD. CTSSA/01998-5/14 SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
Test Report REPORT NO. : CTSSA/01998-5/14 CTS REF. : CTSSA/14/0336/Hitachi DATE REPORTED : 24 th Feb, 2014 PAGE : 4 of 4 MICROWAVE ASSISTED ACID DIGESTION OF SILICEOUS A ORGANICALLY BASED METRICES (US EPA 3052) Sample Preparation Weight sample (0.2-0.5g) into digestion vessel Acid digestion (HF and HNO 3 ) Microwave Totally Dissolved Filtration Analyses by ICP SGS LABORATORY SERVICES (M) SDN. BHD. -------------------------- CHONG KIEN LEN B.Sc.(HONS) AMIC SENIOR LAB MANAGER This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/terms-and-conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions, if any. The Company s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for three months only.
LITTELFUSE LITTELFUSE PHILIPPINES PHILIPPINES INC. INC. LIMA LIMA TECHNOLOGY CENTER, LIPA LIPA CITY, MALVAR, BATANGAS
Number : WUXH00016505 Applicant : CONCORD SEMICOUCTOR(WUXI) CO., LTD. Date : Aug 02, 2013 EAST 1#,ZHENFA 6 ROAD, SHUO FANG IUSTRIAL PARK WUXI NATIONAL HIGH-TECH DEVELOPMENT ZONE, WUXI,JIANGSU,CHINA Attn : ZHANG XIAOPENG Sample Description As Declared: One (1) Piece Of Submitted Sample Said To Be : Copper Metal. Item Name : Copper Spacer(Double Head). Vendor : TAI-E Point Co., Ltd. Component Or Part No. : Copper. Test Item : Cd,Pb,Hg,CrVI. Tests Conducted: As Requested By The Applicant, For Details Refer To Attached Pages Conclusion: Tested Sample Standard Result Submitted Sample With Reference To Test Method Of IEC 62321 Edition 1.0: 2008 And Maximum Concentration Limits Quoted From RoHS Directive 2011/65/EU. Pass Prepared And Checked By: For Intertek Testing Services Wuxi Ltd. Jessica Lu General Manager Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 1 Of 4
Number : WUXH00016505 Tests Conducted (As Requested By The Applicant) 1 (A) Test Result Of RoHS Directive: Testing Item Cadmium (Cd) Content (mg/kg) Lead (Pb) Content (mg/kg) Mercury (Hg) Content (mg/kg) Chromium (VI)(Cr 6+ ) Result (By Boiling Water Extraction On Metal) (mg/kg With 50cm 2 ) Result N Remark:mg/kg With 50cm 2 = Milligram Per Kilogram With 50 Square Centimeter mg/kg = Milligram Per Kilogram =ppm = Not Detected N = Negative (B) RoHS Requirement: Restricted Substances Limits Cadmium (Cd) 0.01% (100 mg/kg) Lead (Pb) 0.1% (1000 mg/kg) Mercury (Hg) 0.1% (1000 mg/kg) Chromium (VI) (Cr 6+ ) 0.1% (1000 mg/kg) The Above Limits Were Quoted From Rohs Directive 2011/65/EU For Homogeneous Material. (C) Test Method: Testing Item Testing Method Reporting Limit Cadmium (Cd) Content Lead (Pb) Content With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. 2 mg/kg 2 mg/kg Mercury (Hg) Content With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. 2 mg/kg Chromium (VI) (Cr 6+ ) Content (For Metal) Date Sample Received: Jul 30, 2013 Testing Period: Jul 30, 2013 To Aug 01, 2013 With Reference To IEC 62321 Edition 1.0: 2008, By Boiling Water Extraction And Determined By UV-VIS Spectrophotometer. 0.02mg/kg With 50cm 2 (In Testing Solution) Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 2 Of 4
Number : WUXH00016505 Tests Conducted (As Requested By The Applicant) (D) Measurement Flowchart: Reference Standard: IEC 62321 Edition 1.0: 2008 Sampling/Grinding Or Cutting Cd/Pb/Hg Cr 6+ Weigh Sample And For Different Material, Digest The Sample With Appropriate Acid *1 Metal Get 50cm 2 Samples Confirm The Tested Samples Are Totally Dissolved Yes Make Up With Deionized Water No Boiling Water Extraction Make Up With Deionized Water And Add Diphenyl- Carbazide Solution Analyzed By ICP-OES Analyzed By UV-VIS Remarks: *1: List Of Appropriate Acid: Material Acid Added For Digestion Polymers HNO 3, HCl,HF,H 2 O 2, H 3 BO 3 Metals HNO 3, HCl,HF Electronics HNO 3, HCl,H 2 O 2, HBF 4 Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 3 Of 4
Number : WUXH00016505 Tests Conducted (As Requested By The Applicant) Photo This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct. Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 4 Of 4
Test Report Number : TWNC00353517 Applicant: Littelfuse Philippines Inc. Date : Jan 24, 2014 LIMA Technology Center, Lipa City, Malvar, Batangas Sample Description: One (1) group of submitted samples said to be : Part Description : Tin Part Number : Tin Date Sample Received : Jan 17, 2014 Date Test Started : Jan 17, 2014 Test Conducted : As requested by the applicant, for details please refer to attached pages. Authorized by: On Behalf of Intertek Testing Services Taiwan Limited K. Y. Liang Director *THJ0353517* Page 1 of 6 Intertek Testing Services Taiwan Ltd. 8F., No. 423, Ruiguang Rd., Neihu District, Taipei 11492, Taiwan, R.O.C. 全國公證檢驗股份有限公司 11492 台北市內湖區瑞光路 423 號 8 樓 Tel: (+886-2) 6602-2888.2797-8885 Fax: (+886-2) 6602-2410
Test Report Test Conducted Test Result Summary: Heavy Metal Test Item Unit Test Method Cadmium (Cd) content Lead (Pb) content Mercury (Hg) content Chromium VI (Cr 6+ ) content ppm ppm ppm mg/kg with 50 cm 2 With reference to IEC 62321-5: 2013, by microwave or acid digestion and determined by ICP-OES. With reference to IEC 62321-5: 2013, by microwave or acid digestion and determined by ICP-OES. With reference to IEC 62321-4: 2013, by microwave or acid digestion and determined by ICP-OES. With reference to IEC 62321: 2008, by boiling water extraction and determined by UV-Vis Spectrophotometer. Number: TWNC00353517 Result Silvery metal RL 2 36 2 2 Negative(#) 0.02 Remarks: ppm = Parts per million based on weight of tested sample = mg/kg = Not detected RL = Reporting limit, quantitation limit of analyte in sample mg/kg with 50cm 2 = Milligram per kilogram with 50 square centimeter Negative = A negative test result indicated positive observation was not found at the time of test. # = Due to the insufficient sample area, reduced total sample surface of 10 cm 2 was used and the dilution factor was adjusted accordingly. Responsibility of Chemist: Kevin Liu/ Irene Chiou Date Sample Received : Jan 17, 2014 Test Period : Jan 17, 2014 To Jan 23, 2014 RoHS Limit Restricted Substances Limits Cadmium (Cd) content 0.01% (100ppm) Lead (Pb) content 0.1% (1000ppm) Mercury (Hg) content 0.1% (1000ppm) Chromium VI (Cr 6+ ) content 0.1% (1000ppm) The above limits were quoted from Annex II of 2011/65/EU for homogeneous material. *THJ0353517* Page 2 of 6 Intertek Testing Services Taiwan Ltd. 8F., No. 423, Ruiguang Rd., Neihu District, Taipei 11492, Taiwan, R.O.C. 全國公證檢驗股份有限公司 11492 台北市內湖區瑞光路 423 號 8 樓 Tel: (+886-2) 6602-2888.2797-8885 Fax: (+886-2) 6602-2410
Test Report Test Conducted Measurement Flowchart: Test for Cd/Pb/Hg/Chromium (VI) Reference Standard:Cd/Pb: IEC 62321-5:2013; Hg: IEC 62321-4:2013; Chromium (VI): IEC 62321:2008 Number: TWNC00353517 Sampling Cd/Pb/Hg Metal Cr 6+ Polymers / Electronics For different material, digest the sample with appropriate acid *1 By spot test Weigh sample and add alkaline solution Confirm the tested samples are totally dissolved Negative *2 Get 50cm 2 sample Definite temp. extraction Make up with deionized water Boiling water extraction Cool and filter the extract Analyzed by ICP-OES Make up with deionized water and add diphenyl-carbazide solution Analyzed by UV-VIS Remarks: *1: List of Appropriate Acid: Material Acid Added for Digestion Polymers HNO 3,HCl,HF,H 2 O 2,H 3 BO 3 Metals HNO 3,HCl,HF Electronics HNO 3,HCl,H 2 O 2,HBF 4 *2: If the result of spot test is positive, Chromium VI would be determined as detected. *THJ0353517* Page 3 of 6 Intertek Testing Services Taiwan Ltd. 8F., No. 423, Ruiguang Rd., Neihu District, Taipei 11492, Taiwan, R.O.C. 全國公證檢驗股份有限公司 11492 台北市內湖區瑞光路 423 號 8 樓 Tel: (+886-2) 6602-2888.2797-8885 Fax: (+886-2) 6602-2410
Test Report Test Conducted Number: TWNC00353517 End of Report This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for anyparticular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and onlyaccepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes nowarranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conductthe Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct. *THJ0353517* Page 4 of 6 Intertek Testing Services Taiwan Ltd. 8F., No. 423, Ruiguang Rd., Neihu District, Taipei 11492, Taiwan, R.O.C. 全國公證檢驗股份有限公司 11492 台北市內湖區瑞光路 423 號 8 樓 Tel: (+886-2) 6602-2888.2797-8885 Fax: (+886-2) 6602-2410
Number: TWNC00353517 *THJ0353517* Page 5 of 6 Intertek Testing Services Taiwan Ltd. 8F., No. 423, Ruiguang Rd., Neihu District, Taipei 11492, Taiwan, R.O.C. 全國公證檢驗股份有限公司 11492 台北市內湖區瑞光路 423 號 8 樓 Tel: (+886-2) 6602-2888.2797-8885 Fax: (+886-2) 6602-2410
Number: TWNC00353517 *THJ0353517* Page 6 of 6 Intertek Testing Services Taiwan Ltd. 8F., No. 423, Ruiguang Rd., Neihu District, Taipei 11492, Taiwan, R.O.C. 全國公證檢驗股份有限公司 11492 台北市內湖區瑞光路 423 號 8 樓 Tel: (+886-2) 6602-2888.2797-8885 Fax: (+886-2) 6602-2410
Number : WUXH00016496 Applicant : CONCORD SEMICOUCTOR(WUXI) CO., LTD. Date : Aug 01, 2013 EAST 1#,ZHENFA 6 ROAD, SHUO FANG IUSTRIAL PARK WUXI NATIONAL HIGH-TECH DEVELOPMENT ZONE, WUXI,JIANGSU,CHINA Attn : ZHANG XIAOPENG Sample Description As Declared: One (1) Piece Of Submitted Sample Said To Be : Silvery Grey Metal. Item Name : Silicon Wafer With Nickel Plating. Vendor : Littelfuse. Component Or Part No. : Silicon+Nickel. Test Item : Cd,Pb,Hg,CrVI,PBBs,PBDEs. Remark : As Requested By The Applicant, Tested As A Whole And Sampled Randomly. Tests Conducted: As Requested By The Applicant, For Details Refer To Attached Pages Prepared And Checked By: For Intertek Testing Services Wuxi Ltd. Jessica Lu General Manager Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 1 Of 5
Number : WUXH00016496 Tests Conducted (As Requested By The Applicant) 1 RoHS Directives Test (A) Test Result Summary: Testing Item Result Cadmium (Cd) Content (mg/kg) Lead (Pb) Content (mg/kg) 25 Mercury (Hg) Content (mg/kg) Chromium (VI)(Cr 6+ ) Result (By Boiling Water Extraction On Metal) (mg/kg With 50cm 2 ) N Polybrominated Biphenyls (PBBs)(mg/kg) Monobrominated Biphenyls (MonoBB) Dibrominated Biphenyls (DiBB) Tribrominated Biphenyls (TriBB) Tetrabrominated Biphenyls (TetraBB) Pentabrominated Biphenyls (PentaBB) Hexabrominated Biphenyls (HexaBB) Heptabrominated Biphenyls (HeptaBB) Octabrominated Biphenyls (OctaBB) Nonabrominated Biphenyls (NonaBB) Decabrominated Biphenyl (DecaBB) Sum Of PBBs Polybrominated Diphenyl Ethers (PBDEs)(mg/kg) Monobrominated Diphenyl Ethers (MonoBDE) Dibrominated Diphenyl Ethers (DiBDE) Tribrominated Diphenyl Ethers (TriBDE) Tetrabrominated Diphenyl Ethers (TetraBDE) Pentabrominated Diphenyl Ethers (PentaBDE) Hexabrominated Diphenyl Ethers (HexaBDE) Heptabrominated Diphenyl Ethers (HeptaBDE) Octabrominated Diphenyl Ethers (OctaBDE) Nonabrominated Diphenyl Ethers (NonaBDE) Decabrominated Diphenyl Ether (DecaBDE) Sum Of PBDEs Remark: mg/kg = Milligram Per Kilogram = ppm mg/kg With 50cm 2 = Milligram Per Kilogram With 50 Square Centimeter = Not Detected N=Negative Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 2 Of 5
Number : WUXH00016496 Tests Conducted (As Requested By The Applicant) (B)RoHS Requirement: Restricted Substances Cadmium (Cd) Lead (Pb) Mercury (Hg) Chromium (VI) (Cr 6+ ) Polybrominated Biphenyls (PBBs) Polybrominated Diphenyl Ethers (PBDEs) Limits 0.01% (100 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) 0.1% (1000 mg/kg) The Above Limits Were Quoted From RoHS Directive 2011/65/EU For Homogeneous Material. (C) Test Method: Testing Item Testing Method Reporting Limit Cadmium (Cd) Content Lead (Pb) Content Mercury (Hg) Content Chromium (VI) (Cr 6+ ) Content(For Metal) Polybrominated Biphenyls (PBBs)& Polybrominated Diphenyl Ethers (PBDEs) Date Sample Received: Jul 30, 2013 Testing Period: Jul 30, 2013 To Aug 01, 2013 With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0:2008, By Boiling Water Extraction And Determined By UV-VIS Spectrophotometer With Reference To IEC 62321 Edition 1.0: 2008, By Solvent Extraction And Determined By GC/MS And Further HPLC Confirmation When Necessary. 2 mg/kg 2 mg/kg 2 mg/kg 0.02mg/kg With 50cm 2 (In Testing Solution) 5 mg/kg Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 3 Of 5
Number : WUXH00016496 Tests Conducted (As Requested By The Applicant) (D) Measurement Flowchart: Reference Standard: IEC 62321 Edition 1.0: 2008 Sampling/Grinding Or Cutting Cd/Pb/Hg Cr 6+ PBBs/PBDEs Metal Weigh Sample And For Different Material, Digest The Sample With Appropriate Acid *1 Spot Test Positive *2 Weigh Sample And Add Organic Solvent Confirm The Tested Samples Are Totally Dissolved Yes No Get 50cm 2 Samples Boiling Water Extraction Soxhlet Extraction Or Solvent Extraction Make Up With Deionized Water Analyzed By ICP-OES Make Up With Deionized Water And Add Diphenyl- Carbazide Solution Concentrate The Extract And Make Up With Organic Solvent Chemist: Inorganic(Jenny Xu/Eve Deng) Organic (April Zang/Zoe Zhang Analyzed By UV-VIS Remarks: Analyzed By UV-VIS *1: List Of Appropriate Acid: Material Acid Added For Digestion Polymers HNO 3, HCl,HF,H 2 O 2, H 3 BO 3 Metals HNO 3, HCl,HF Electronics HNO 3, HCl,H 2 O 2, HBF 4 Analyzed By GC-MSD *2: If The Result Of Spot Test Is Positive, Chromium VI Would Be Determined As Detected. Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 4 Of 5
Number : WUXH00016496 Tests Conducted (As Requested By The Applicant) Photo This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct. Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 5 Of 5
Number : WUXH00016497 Applicant : CONCORD SEMICOUCTOR(WUXI) CO., LTD. Date : Aug 01, 2013 EAST 1#,ZHENFA 6 ROAD, SHUO FANG IUSTRIAL PARK WUXI NATIONAL HIGH-TECH DEVELOPMENT ZONE, WUXI,JIANGSU,CHINA Attn : ZHANG XIAOPENG Sample Description As Declared: One (1) Piece Of Submitted Sample Said To Be : White Powder. Item Name : Wafer Passivation (Glass). Vendor : Propriety. Component Or Part No. : Propriety. Test Item : Cd,Pb,Hg,CrVI,PBBs,PBDEs,F,Cl,Br,I. Tests Conducted: As Requested By The Applicant, For Details Refer To Attached Pages Prepared And Checked By: For Intertek Testing Services Wuxi Ltd. Jessica Lu General Manager Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 1 Of 7
Number : WUXH00016497 Tests Conducted (As Requested By The Applicant) 1 RoHS Directives Test (A) Test Result Summary: Testing Item Result Cadmium (Cd) Content (mg/kg) Lead (Pb) Content (mg/kg) 312500 Mercury (Hg) Content (mg/kg) Chromium (VI) (Cr 6+ ) Content (mg/kg)(for Non-Metal) Polybrominated Biphenyls (PBBs)(mg/kg) Monobrominated Biphenyls (MonoBB) Dibrominated Biphenyls (DiBB) Tribrominated Biphenyls (TriBB) Tetrabrominated Biphenyls (TetraBB) Pentabrominated Biphenyls (PentaBB) Hexabrominated Biphenyls (HexaBB) Heptabrominated Biphenyls (HeptaBB) Octabrominated Biphenyls (OctaBB) Nonabrominated Biphenyls (NonaBB) Decabrominated Biphenyl (DecaBB) Sum Of PBBs Polybrominated Diphenyl Ethers (PBDEs)(mg/kg) Monobrominated Diphenyl Ethers (MonoBDE) Dibrominated Diphenyl Ethers (DiBDE) Tribrominated Diphenyl Ethers (TriBDE) Tetrabrominated Diphenyl Ethers (TetraBDE) Pentabrominated Diphenyl Ethers (PentaBDE) Hexabrominated Diphenyl Ethers (HexaBDE) Heptabrominated Diphenyl Ethers (HeptaBDE) Octabrominated Diphenyl Ethers (OctaBDE) Nonabrominated Diphenyl Ethers (NonaBDE) Decabrominated Diphenyl Ether (DecaBDE) Sum Of PBDEs Remark: mg/kg = Milligram Per Kilogram = ppm = Not Detected Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 2 Of 7
Number : WUXH00016497 Tests Conducted (As Requested By The Applicant) (B)RoHS Requirement: Restricted Substances Limits Cadmium (Cd) 0.01% (100 mg/kg) Lead (Pb) 0.1% (1000 mg/kg) Mercury (Hg) 0.1% (1000 mg/kg) Chromium (VI) (Cr 6+ ) 0.1% (1000 mg/kg) Polybrominated Biphenyls (PBBs) 0.1% (1000 mg/kg) Polybrominated Diphenyl Ethers (PBDEs) 0.1% (1000 mg/kg) The Above Limits Were Quoted From RoHS Directive 2011/65/EU For Homogeneous Material. (C) Test Method: Testing Item Testing Method Reporting Limit Cadmium (Cd)Content Lead (Pb)Content Mercury (Hg)Content Chromium (VI) (Cr 6+ ) Content (For Non-Metal) Polybrominated Biphenyls (PBBs)& Polybrominated Diphenyl Ethers (PBDEs) Date Sample Received: Jul 30, 2013 Testing Period: Jul 30 2013 To Jul 31, 2013 With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Alkaline Digestion And Determined By UV-VIS Spectrophotometer. With Reference To IEC 62321 Edition 1.0: 2008, By Solvent Extraction And Determined By GC/MS And Further HPLC Confirmation When Necessary. 2 mg/kg 2 mg/kg 2 mg/kg 1 mg/kg 5 mg/kg Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 3 Of 7
Number : WUXH00016497 Tests Conducted (As Requested By The Applicant) (D) Measurement Flowchart: Reference Standard: IEC 62321 Edition 1.0: 2008 Sampling/Grinding Or Cutting Cd/Pb/Hg Cr 6+ Polymers / Electronics PBBs/PBDEs Weigh Sample And For Different Material, Digest The Sample With Appropriate Acid *1 Weigh Sample And Add Alkaline Solution Weigh Sample And Add Organic Solvent Confirm The Tested Samples Are Totally Dissolved Yes No Definite Temp. Extraction Soxhlet Extraction Or Solvent Extraction Make Up With Deionized Water Analyzed By ICP-OES Cool And Filter The Extract Make Up With Deionized Water And Add Diphenyl- Carbazide Solution Concentrate The Extract And Make Up With Organic Solvent Analyzed By GC-MSD Chemist: Inorganic(Jenny Xu/Eve Deng) Organic (April Zang/Zoe Zhang) Analyzed By UV-VIS Remarks: *1: List Of Appropriate Acid: Material Acid Added For Digestion Polymers HNO 3, HCl,HF,H 2 O 2, H 3 BO 3 Metals HNO 3, HCl,HF Electronics HNO 3, HCl,H 2 O 2, HBF 4 Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 4 Of 7
Number : WUXH00016497 Tests Conducted (As Requested By The Applicant) 2 Halogen Test (I) Test Result Summary : Halogen Content: Testing Item Fluorine (F) Content Chlorine (Cl)Content Bromine (Br) Content Iodine (I) Content Result (ppm) Remarks : ppm = Parts Per Million = mg/kg = Not Detected Date Sample Received: Jul 30, 2013 Testing Period: Jul 30 2013 To Jul 31, 2013 (II) Test Method : Testing Item Testing Method With Reference To EN 14582:2007 By Combustion In A Halogen (F,Cl, Br,I) Content Calorimetric Bomb And Determined By Ion Chromatography Remarks : Reporting Limit = Quantitation Limit Of Analyte In Sample Reporting Limit 50 ppm Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 5 Of 7
Number : WUXH00016497 Tests Conducted (As Requested By The Applicant) (III) Measurement Flowchart: Test For Halogen Content Reference Method: EN 14582:2007 Sampling/Grinding Or Cutting Add Absorbent In A Combustion Flask & Place Weighed Sample In Fill The Calorimetric Bomb With Oxygen Ignite Then Leave The Flask At Room Temperature Any Test Specimen In The Olorimetric Bomb? Yes No Transfer The Absorbent Into A Volumetric Flask Make Up With Deionized Water Analyzed By Ion Chromatography Chemist: Eve Deng Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 6 Of 7
Number : WUXH00016497 Tests Conducted (As Requested By The Applicant) Photo This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct. Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 7 Of 7
Number : WUXH00016513 Applicant : CONCORD SEMICOUCTOR(WUXI) CO., LTD. Date : Aug 05, 2013 EAST 1#,ZHENFA 6 ROAD, SHUO FANG IUSTRIAL PARK WUXI NATIONAL HIGH-TECH DEVELOPMENT ZONE, WUXI,JIANGSU,CHINA Attn : ZHANG XIAOPENG Sample Description As Declared: One (1) Piece Of Submitted Sample Said To Be : Gray Paste. Item Name : Solder Paste. Vendor : Heraeus Materials Technology Shanghai Ltd. Component Or Part No. : AG3-D3-NC237-6(Pb:Sn:Ag=92.5:5:2.5). Test Item : Cd,Pb,Hg,CrVI,PBBs,PBDEs,F,Cl,Br,I,Phthalate,HBCDD. Tests Conducted: As Requested By The Applicant, For Details Refer To Attached Pages Prepared And Checked By: For Intertek Testing Services Wuxi Ltd. Jessica Lu General Manager Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 1 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) 1 RoHS Directives Test (A) Test Result Summary: Testing Item Result Cadmium (Cd) Content (mg/kg) Lead (Pb) Content (mg/kg) 925100 Mercury (Hg) Content (mg/kg) Chromium (VI) (Cr 6+ ) Content (mg/kg)(for Non-Metal) Polybrominated Biphenyls (PBBs)(mg/kg) Monobrominated Biphenyls (MonoBB) Dibrominated Biphenyls (DiBB) Tribrominated Biphenyls (TriBB) Tetrabrominated Biphenyls (TetraBB) Pentabrominated Biphenyls (PentaBB) Hexabrominated Biphenyls (HexaBB) Heptabrominated Biphenyls (HeptaBB) Octabrominated Biphenyls (OctaBB) Nonabrominated Biphenyls (NonaBB) Decabrominated Biphenyl (DecaBB) Sum Of PBBs Polybrominated Diphenyl Ethers (PBDEs)(mg/kg) Monobrominated Diphenyl Ethers (MonoBDE) Dibrominated Diphenyl Ethers (DiBDE) Tribrominated Diphenyl Ethers (TriBDE) Tetrabrominated Diphenyl Ethers (TetraBDE) Pentabrominated Diphenyl Ethers (PentaBDE) Hexabrominated Diphenyl Ethers (HexaBDE) Heptabrominated Diphenyl Ethers (HeptaBDE) Octabrominated Diphenyl Ethers (OctaBDE) Nonabrominated Diphenyl Ethers (NonaBDE) Decabrominated Diphenyl Ether (DecaBDE) Sum Of PBDEs Remark: mg/kg = Milligram Per Kilogram = ppm = Not Detected Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 2 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) (B)RoHS Requirement: Restricted Substances Limits Cadmium (Cd) 0.01% (100 mg/kg) Lead (Pb) 0.1% (1000 mg/kg) Mercury (Hg) 0.1% (1000 mg/kg) Chromium (VI) (Cr 6+ ) 0.1% (1000 mg/kg) Polybrominated Biphenyls (PBBs) 0.1% (1000 mg/kg) Polybrominated Diphenyl Ethers (PBDEs) 0.1% (1000 mg/kg) The Above Limits Were Quoted From RoHS Directive 2011/65/EU For Homogeneous Material. (C) Test Method: Testing Item Testing Method Reporting Limit Cadmium (Cd)Content Lead (Pb)Content Mercury (Hg)Content Chromium (VI) (Cr 6+ ) Content (For Non-Metal) Polybrominated Biphenyls (PBBs)& Polybrominated Diphenyl Ethers (PBDEs) Date Sample Received: Jul 30, 2013 Testing Period: Jul 30 2013 To Aug 02, 2013 With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Acid Digestion Until The Tested Sample Was Totally Dissolved, And Determined By ICP-OES. With Reference To IEC 62321 Edition 1.0: 2008, By Alkaline Digestion And Determined By UV-VIS Spectrophotometer. With Reference To IEC 62321 Edition 1.0: 2008, By Solvent Extraction And Determined By GC/MS And Further HPLC Confirmation When Necessary. 2 mg/kg 2 mg/kg 2 mg/kg 1 mg/kg 5 mg/kg Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 3 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) (D) Measurement Flowchart: Reference Standard: IEC 62321 Edition 1.0: 2008 Sampling/Grinding Or Cutting Cd/Pb/Hg Cr 6+ Polymers / Electronics PBBs/PBDEs Weigh Sample And For Different Material, Digest The Sample With Appropriate Acid *1 Weigh Sample And Add Alkaline Solution Weigh Sample And Add Organic Solvent Confirm The Tested Samples Are Totally Dissolved Yes No Definite Temp. Extraction Soxhlet Extraction Or Solvent Extraction Make Up With Deionized Water Analyzed By ICP-OES Cool And Filter The Extract Make Up With Deionized Water And Add Diphenyl- Carbazide Solution Concentrate The Extract And Make Up With Organic Solvent Analyzed By GC-MSD Chemist: Inorganic(Jenny Xu/Eve Deng) Organic (April Zang/Zoe Zhang) Analyzed By UV-VIS Remarks: *1: List Of Appropriate Acid: Material Acid Added For Digestion Polymers HNO 3, HCl,HF,H 2 O 2, H 3 BO 3 Metals HNO 3, HCl,HF Electronics HNO 3, HCl,H 2 O 2, HBF 4 Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 4 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) 2 Halogen Test (I) Test Result Summary : Halogen Content: Testing Item Fluorine (F) Content Chlorine (Cl)Content Bromine (Br) Content Iodine (I) Content Result (ppm) Remarks : ppm = Parts Per Million = mg/kg = Not Detected Date Sample Received: Jul 30, 2013 Testing Period: Jul 30 2013 To Aug 02, 2013 (II) Test Method : Testing Item Testing Method With Reference To EN 14582:2007 By Combustion In A Halogen (F,Cl, Br,I) Content Calorimetric Bomb And Determined By Ion Chromatography Remarks : Reporting Limit = Quantitation Limit Of Analyte In Sample Reporting Limit 50 ppm Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 5 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) (III) Measurement Flowchart: Test For Halogen Content Reference Method: EN 14582:2007 Sampling/Grinding Or Cutting Add Absorbent In A Combustion Flask & Place Weighed Sample In Fill The Calorimetric Bomb With Oxygen Ignite Then Leave The Flask At Room Temperature Any Test Specimen In The Olorimetric Bomb? Yes No Transfer The Absorbent Into A Volumetric Flask Make Up With Deionized Water Analyzed By Ion Chromatography Chemist: Eve Deng Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 6 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) 3 Phthalate Content Test With Reference To EN14372, By Gas Chromatographic-Mass Spectrometric (GC-MSD) Analysis. Tested Compound Dibutyl Phthalate (DBP) Diethyl Hexyl Phthalate(DEHP) Benzyl Butyl Phthalate (BBP) Di-isobutyl phthalate(dibp) Di-Iso-Nonyl Phthalate (DINP) Di-N-Octyl Phthalate (DNOP) Di-Iso-Decyl Phthalate (DIDP) Result (%,W/W) Detection Limit = 0.01%(W/W) = Not Detected Date Sample Received : Jul 30, 2013 Testing Period : Jul 30, 2013 To Aug 02, 2013 Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 7 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) Measurement Flowchart: Test For Phthalates Contents Weigh Sample And Place In A Thimble Extracted By Soxhlet Extraction With Organic Solvent Concentrate The Extract Transfer The Extract Into A Volumetric Flask Make Up With Organic Solvent Analyze By GC-MSD Chemist: Inorganic (Ann Luo/Fred Wang/Ally Wan) Organic (Jenny Xu/Cherry Sun) Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 8 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) 4 HBCDD (Hexabromocyclododecane) (A) Test Result Summary: Testing Item HBCDD (Hexabromocyclododecane) Result(ppm) Remarks: ppm = Parts Per Million = mg/kg = Not Detected (B) Test Method : Testing Item HBCDD (Hexabromocyclododecane) Testing Method With Reference To US EPA 3540C, By Solvent Extraction And Determined By GC-MSD Reporting Limit 10 ppm Date Sample Received : Jul 30, 2013 Testing Period : Jul 30, 2013 To Aug 02, 2013 Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 9 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) Measurement Flowchart: Test For HBCDD (Hexabromocyclododecane) Content Weigh Sample And Place In A Thimble Extracted By Soxhlet Extraction With Organic Solvent Concentrate The Extract Transfer The Extract Into A Volumetric Flask Make Up With Organic Solvent Analyze By GC-MSD Chemist: Inorganic (Ann Luo/Fred Wang/Ally Wan) Organic (Jenny Xu/Cherry Sun) Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 10 Of 11
Number : WUXH00016513 Tests Conducted (As Requested By The Applicant) Photo This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful misconduct. Intertek Testing Services Wuxi Ltd. No.8 Fubei Road, Xishan Economic Development Zone, Wuxi 214101, Jiangsu, China Tel: +86 510 8821 4567 Fax: +86 510 8820 0428 E-mail: consumergoods.wuxi@intertek.com Page 11 Of 11
Annex 8: Applicable RoHS exemptions (2011/65/EU Annex III) Littelfuse, Inc. Annex 8