Alpha 3-8 Small Sealed Midrange Design By Jerry McNutt, Eminence Speaker LLC 30 Watts; F3 at 185 Hz. Best used above 250 Hz.

Similar documents
Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 100 watts. Maximum Acoustic Power (db-spl/hz at 1 m)

Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 160 watts. Maximum Acoustic Power (db-spl/hz at 1 m)

Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 125 watts. Maximum Acoustic Power (db-spl/hz at 1 m)

Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 850 watts Eminence Designer

H C. Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 450 watts Eminence Designer

File: KappaPro15SmallVentedBox500Watts.bb6

PRO 5W-8. Professional series. SPL vs Freq. Specification. Materials of Construction

Klippel Non-Linear Test Results. LSI (Large Signal Identification) Model #: PS Introduction. Large Signal Modeling. Nonlinear Characteristics

Klippel Non-Linear Test Results LSI (Large Signal Identification) Driver Name: ND90-8. Introduction. Nonlinear Parameters. Large Signal Modeling

Open Baffle w/ 2 Drivers - Acoustic Response 12/27/12. Copyright 2012 by Martin J. King. All Rights Reserved.

Copyright 2014 by Martin J. King. All Rights Reserved. Configuration : Extended Range Driver w/ Bass Driver Mounted on an Open Baffle

Nonlinear Losses in Electro-acoustical Transducers Wolfgang Klippel, Daniel Knobloch

Open Baffle w/ 2 Drivers - Acoustic Response 12/30/14. Copyright 2014 by Martin J. King. All Rights Reserved.

Chapter 3. Background

Driver in a H Frame Transmission Line - Acoustic and Electrical Response 4/26/11. Copyright 2011 by Martin J. King. All Rights Reserved.

Contents. 0. Introduction Loudspeaker s Impedance Why is this useful? How good is it? Bibliography...

ENGR-4300 Spring 2009 Test 2. Name: SOLUTION. Section: 1(MR 8:00) 2(TF 2:00) 3(MR 6:00) (circle one) Question I (20 points): Question II (20 points):

Nonlinear Modeling of the Heat Transfer in Loudspeakers

Test Report. Force applied by the Transducer of the Frequencer TM, model Written by: Bruno Tardif, P.Eng. Dymedso Inc.

Series CCT-58S Multi-Throw DC 18 GHz, SP7T & SP8T Normally Open Coaxial Switch

Section 7.0 : Design of a Back Loaded Exponential Horn By Martin J. King, 08/17/04 Copyright 2004 by Martin J. King. All Rights Reserved.

Basics of Sound and Noise. David Herrin, Ph.D., P.E. University of Kentucky Department of Mechanical Engineering

Acoustics Analysis of Speaker ANSYS, Inc. November 28, 2014

200 SERIES CINEMA SCREENARRAY LOUDSPEAKER SYSTEM

Phys102 Final-132 Zero Version Coordinator: A.A.Naqvi Wednesday, May 21, 2014 Page: 1

P773 Acoustics June, 2008

Series CCR-39S Multi-Throw DC-12 GHz, SP7T & SP8T Latching Coaxial Switch

Accurate Determination of Loudspeaker Parameters using Audio Analyzer Type 2012 and Laser Velocity Transducer Type 3544

Series CCR-39S Multi-Throw DC-12 GHz, SP9T & SP10T Latching Coaxial Switch

REACTANCE. By: Enzo Paterno Date: 03/2013

Core Technology Group Application Note 3 AN-3

Series CCR-39S Multi-Throw DC-12 GHz, SP9T & SP10T Latching Coaxial Switch

Extended Creep Modeling AN 49

Experimental investigation of perforations interactions effects under high sound pressure levels

Notes on Absorption and Impedance Measurements

Relative pressure transmitter type 520

Power Systems - Basic Concepts and Applications - Part I

APPLICATION OF THE FINITE ELEMENT METHOD TO MODEL THE NONLINEAR VOICE COIL MOTION PRODUCED BY A LOUDSPEAKER MAGNET ASSEMBLY.

Digital display Pressure range ON/OFF output Linear output Model No Positive pressure 0 to 98 kpa (0 to 1 kgf/cm 2 ) NPN open collector o 1 to o5

Introduction to Acoustics Exercises

H -Control of Acoustic Noise in a Duct with a Feedforward Configuration

Note 11: Alternating Current (AC) Circuits

Simulation of a Thermo-Acoustic Refrigerator

PHYSICS Course Structure Units Topics Marks Electrostatics Current Electricity III Magnetic Effect of Current & Magnetism

EF 152 Final Exam - Fall, 2016 Page 1 Copy 169

Section 6.0 : Advanced Transmission Line Modeling Techniques By Martin J King, 07/05/02 Copyright 2002 by Martin J. King. All Rights Reserved.

EXP. NO. 3 Power on (resistive inductive & capacitive) load Series connection

Introduction to Acoustics. Phil Joseph

Nonlinear Force Factor Measurement of an Electrodynamic Loudspeaker

Mechanical and Acoustical Resonators

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

TETRA COMPACT. PreliminarY

LOUDSPEAKER ROCKING MODES MODELLING AND ROOT CAUSE ANALYSIS. William Cardenas and Wolfgang Klippel. Presented by Stefan Irrgang. KLIPPEL GmbH.

E8EB-N0C2B E8EB-N0B2B

INTRODUCTION. Description

TECHNICAL BULLETIN 006 Symmetrical Components Overview. Introduction. I a g I b g I c

v (m/s) 10 d. displacement from 0-4 s 28 m e. time interval during which the net force is zero 0-2 s f. average velocity from 0-4 s 7 m/s x (m) 20

Single-Phase Synchronverter for DC Microgrid Interface with AC Grid

Mathewlal T 1, GauravSingh 2, Chetan Devadiga 3, Nehal Mendhe 3, 1 Mechanical Engineering Department, Fr CRIT, Vashi, Mumbai.

Q1. A) 53.3 cm/s B) 59.8 cm/s C) 77.5 cm/s D) 35.1 cm/s E) 44.7 cm/s. Ans: 1.6 Q2.

1 of 11 4/27/2013 8:48 PM

Megavolt Parallel Potentials Associated With Double Layer Streams In The Earth s Outer Radiation Belt

1. Dimensions of force constant are (MHT-CET-2003) (a) M 1 L 0 T 2 (b) M 1 L 0 T 2. (c) M 0 L 1 T 2 (d) MLT 2

RADIO AMATEUR EXAM GENERAL CLASS

Physics 7B-1 (A/B) Professor Cebra. Winter 2010 Lecture 2. Simple Circuits. Slide 1 of 20

Page 1 of 10 pages Appendix, 5 pages Report no.: P Glostrup, October 12th 2012 Project: Claimant:

2. A proton is traveling with velocity v, to the right, through a magnetic field pointing into the page as indicated in the figure below.

3.2.2 Magnets. The properties of the quadrupoles, sextupoles and correctors are listed in tables t322_b,_c and _d.

1) Opposite charges and like charges. a) attract, repel b) repel, attract c) attract, attract

Impedance Measurement of a Thermoacoustic Engine Constructed from a Helmholtz Resonator

University of Kentucky

Modeling of Membrane Sound Absorbers

AFMG. Focus Your Sub Arrays! AHNERT FEISTEL MEDIA GROUP. PLS 2017, Frankfurt

CDD/CDR. Single cone ceiling diffusers for supply air. Quick facts. Quick guide CDD/CDR A I R F L O W - S O U N D L E V E L

ST303C..L SERIES 515A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25186 rev. A 05/94. case style TO-200AC (B-PUK)

Module 4. Single-phase AC Circuits

ST1230C..K SERIES 1745A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25194 rev. B 01/00. case style A-24 (K-PUK)

March 26, Title: TEMPO 21 Report. Prepared for: Sviazinvest, OJSC. Prepared by: Cree Durham Technology Center (DTC) Ticket Number: T


V1 CURL Wall fixture

Linear Magnetostrictive Models in Comsol

Multi-function, economical instrument with 4 functions in the same casing. Accessibility and safety: large-dimension terminals Insulated circuits

ELECTROMAGNETIC OSCILLATIONS AND ALTERNATING CURRENT

Quiz on Chapters 13-15

32 Input AC Block I/O Module

1. The nucleus of a certain isotope of tin contains 68 neutrons and 50 protons. Which symbol correctly represents this isotope? A.

University of Alberta ENGM 541: Modeling and Simulation of Engineering Systems Laboratory #7. M.G. Lipsett & M. Mashkournia 2011

IES ROAD REPORT PHOTOMETRIC FILENAME : KU899-9LED.IES. DESCRIPTIVE INFORMATION (From Photometric File)

Impedance and Loudspeaker Parameter Measurement

Fan Stage Broadband Noise Benchmarking Programme

Exam 2 Solutions. Note that there are several variations of some problems, indicated by choices in parentheses.

400 Volts, 50HZ 480 Volts, 60HZ 600 Volts, 60HZ TECHNICAL REFERENCE MANUAL

how the measurements are used to determine the input power to the

Renewable Energy Systems

Consider a simple RC circuit. We might like to know how much power is being supplied by the source. We probably need to find the current.

4. The discovery of X-rays and electrons 4.1 Gas discharges

A gas-spring system for optimizing loudspeakers in thermoacoustic refrigerators Tijani, M.E.H.; Zeegers, J.C.H.; de Waele, A.T.A.M.

Numerical investigation of a looped-tube traveling-wave thermoacoustic generator with a bypass pipe

Three Phase Circuits

Operating limits and tolerances of platinum resistance thermometers per EN 60751: 2008

Transcription:

Alpha 3-8 Small Sealed Midrange Design By Jerry McNutt, Eminence Speaker LLC 30 Watts; F3 at 185 Hz. Best used above 250 Hz. Box Properties --Description-- Name: Type: Closed Box Shape: Prism, square --Box Parameters-- Vb = 0.0344 cu.ft V(total) = 0.038 cu.ft Qtc = 0.22 QL = 20 F3 = 185.2 Hz Fill = normal A --External Dimensions-- A = 5.3 in B = 5.3 in C = 4.457 in --Internal Dimensions-- A = 4.3 in B = 4.3 in C = 3.457 in --Wall Thickness-- Front = 0.5 in Side = 0.5 in Driver Properties --Description-- Name: Alpha 3-8 Type: Standard one-way driver Company: Eminence Speaker LLC Comment: 3" Full Range Driver --Configuration-- No. of Drivers = 1 --Mechanical Parameters-- Fs = 117. Hz Qms = 7.94 Vas = 0.95 liters Cms = 0.84 mm/n Mms = 2.18 g Rms = 0.2 kg/s Xmax = 2.4 mm Xmech = 4 mm P-Dia = 59.94 mm Sd = 28.58 sq.cm P-Vd = 0.0077 liters --Electrical Parameters-- Qes = 0.53 Re = 5.12 ohms Le = 0.11 mh Z = 8 ohms BL = 3.93 Tm Pe = 30 watts --Electromech. Parameters-- Qts = 0.497 no = 0.281 % 1-W SPL = 8.3 2.83-V SPL = 88.57 B C File: Alpha3-8SmallSealedMidrange30Watts.bb

Page Two -- Alpha3-8SmallSealedMidrange30Watts.bb c top & bottom Box Parts Box Shape: Square Prism 1 Top, 1 Bottom: depth (c) = 4.457 in width (b) = 5.3, thickness = 0.5 in 1 Front, 1 Back: height (a) = 4.3 in width (d) = 4.3, thickness = 0.5 in 2 Sides: height (a) = 4.3 in depth (c) = 4.457, thickness = 0.5 in --Driver Mounting-- Mounting: Flush b d c a front & back sides

Page Three -- Alpha3-8SmallSealedMidrange30Watts.bb Normalized Amplitude Response (-SPL/Hz) 0 - -12-18 -24-30 -3 Custom Amplitude Response (-SPL/Hz at 1 m) with 30 watts 9 3 97 91 85 79 73 7 Maximum Acoustic Power (-SPL/Hz at 1 m) 7 1 95 89 83 77 71 5

Page Four -- Alpha3-8SmallSealedMidrange30Watts.bb Maximum Electric Input Power (W/Hz) watts 200 0 20 2 Cone Displacement (mm/hz) with 30 watts mm 1 14 12 8 4 2 System Impedance (ohms/hz) ohms 80 70 0 50 40 30 20

Alpha 3-8 Small Vented Midbass Design By Jerry McNutt, Eminence Speaker LLC 20 Watts; F3 at 111 Hz. Best used above 150 Hz. For midbass or for a micro small satellite speaker system. Box Properties --Description-- Name: Type: Vented Box Shape: Prism, square --Box Parameters-- Vb = 0.045 cu.ft V(total) = 0.0523 cu.ft Fb = 125 Hz QL = 7 F3 = 111 Hz Fill = normal --Vents-- No. of Vents = 1 Vent shape = round Vent ends = one flush Dv = 1.3 in Lv = 3.795 in A B C --External Dimensions-- A = 5.3 in B = 5.3 in C = 5.751 in --Internal Dimensions-- A = 4.3 in B = 4.3 in C = 4.751 in --Wall Thickness-- Front = 0.5 in Side = 0.5 in Driver Properties --Description-- Name: Alpha 3-8 Type: Standard one-way driver Company: Eminence Speaker LLC Comment: 3" Full Range Driver --Configuration-- No. of Drivers = 1 --Mechanical Parameters-- Fs = 117. Hz Qms = 7.94 Vas = 0.95 liters Cms = 0.84 mm/n Mms = 2.18 g Rms = 0.2 kg/s Xmax = 2.4 mm Xmech = 4 mm P-Dia = 59.94 mm Sd = 28.58 sq.cm P-Vd = 0.0077 liters --Electrical Parameters-- Qes = 0.53 Re = 5.12 ohms Le = 0.11 mh Z = 8 ohms BL = 3.93 Tm Pe = 30 watts --Electromech. Parameters-- Qts = 0.497 no = 0.281 % 1-W SPL = 8.3 2.83-V SPL = 88.57 File: Alpha3-8SmallVentedMidbass20Watts.bb

Page Two -- Alpha3-8SmallVentedMidbass20Watts.bb c top & bottom b Box Parts Box Shape: Square Prism 1 Top, 1 Bottom: depth (c) = 5.751 in width (b) = 5.3, thickness = 0.5 in 1 Front, 1 Back: height (a) = 4.3 in width (d) = 4.3, thickness = 0.5 in 2 Sides: height (a) = 4.3 in depth (c) = 5.751, thickness = 0.5 in --Vent Parts-- 1 Duct: outside diameter (e) = 1.55 in inside diameter (g) = 1.3 in length (h) = 3.795 in --Driver Mounting-- Mounting: Flush d c a front & back sides vent e g h

Page Three -- Alpha3-8SmallVentedMidbass20Watts.bb Normalized Amplitude Response (-SPL/Hz) 0 - -12-18 -24-30 -3 Custom Amplitude Response (-SPL/Hz at 1 m) with 20 watts 8 2 9 90 84 78 72 Maximum Acoustic Power (-SPL/Hz at 1 m) 7 1 95 89 83 77 71 5

Page Four -- Alpha3-8SmallVentedMidbass20Watts.bb Maximum Electric Input Power (W/Hz) watts 200 0 20 2 Cone Displacement (mm/hz) with 20 watts mm 1 14 12 8 4 2 Vent Air Velocity ( m/sec/hz) with 20 watts m/s 48 42 3 30 24 18 12

Page Five -- Alpha3-8SmallVentedMidbass20Watts.bb System Impedance (ohms/hz) ohms 80 70 0 50 40 30 20

Alpha 3-8 Vented Column Array Module By Jerry McNutt, Eminence Speaker LLC 150 Watts; F3 at 9 Hz. Best used above 150 Hz. 4 ohms per module. Stack them for longer throw. Box Properties --Description-- Name: Type: Vented Box Shape: Prism, square --Box Parameters-- Vb = 0.41 cu.ft V(total) = 0.458 cu.ft Fb = 125 Hz QL = 7 F3 = 9 Hz Fill = normal --Vents-- No. of Vents = 2 Vent shape = round Vent ends = one flush Dv = 3 in Lv = 2.385 in A B C --External Dimensions-- A = 33 in B = 5 in C = 7.179 in --Internal Dimensions-- A = 32 in B = 4 in C =.179 in --Wall Thickness-- Front = 0.5 in Side = 0.5 in Driver Properties --Description-- Name: Alpha 3-8 Type: Standard one-way driver Company: Eminence Speaker LLC Comment: 3" Full Range Driver --Configuration-- No. of Drivers = 8 Mounting = Standard Wiring = Series-Parallel Drivers sum coherently = Yes --Mechanical Parameters-- Fs = 117. Hz Qms = 7.94 Vas = 0.95 liters [7.] Cms = 0.84 mm/n [0.5] Mms = 2.18 g [17.44] Rms = 0.2 kg/s [1.] Xmax = 2.4 mm Xmech = 4 mm P-Dia = 59.94 mm [19.5] Sd = 28.58 sq.cm [228.] P-Vd = 0.0077 liters [0.0542] --Electrical Parameters-- Qes = 0.53 Re = 5.12 ohms [2.5] Le = 0.11 mh [0.055] Z = 8 ohms [4] BL = 3.93 Tm [7.889] Pe = 30 watts [240] --Electromech. Parameters-- Qts = 0.497 no = 0.281 % [2.248] 1-W SPL = 8.3 [95.7] 2.83-V SPL = 88.57 [0.] File: Alpha3-8VentedColumnArrayModule150Watts.bb

Page Two -- Alpha3-8VentedColumnArrayModule150Watts.bb c top & bottom b d c Box Parts Box Shape: Square Prism 1 Top, 1 Bottom: depth (c) = 7.179 in width (b) = 5, thickness = 0.5 in 1 Front, 1 Back: height (a) = 32 in width (d) = 4, thickness = 0.5 in 2 Sides: height (a) = 32 in depth (c) = 7.179, thickness = 0.5 in --Vent Parts-- 2 Ducts: outside diameter (e) = 3.25 in inside diameter (g) = 3 in length (h) = 2.385 in --Driver Mounting-- Mounting: Flush Aim: All drivers face same direction a front & back sides vent e g h

Page Three -- Alpha3-8VentedColumnArrayModule150Watts.bb Normalized Amplitude Response (-SPL/Hz) 0 - -12-18 -24-30 -3 Custom Amplitude Response (-SPL/Hz at 1 m) with 150 watts 125 119 113 7 1 95 89 83 Maximum Acoustic Power (-SPL/Hz at 1 m) 125 119 113 7 1 95 89 83

Page Four -- Alpha3-8VentedColumnArrayModule150Watts.bb Maximum Electric Input Power (W/Hz) watts 200 0 20 2 Cone Displacement (mm/hz) with 150 watts mm 1 14 12 8 4 2 Vent Air Velocity ( m/sec/hz) with 150 watts m/s 48 42 3 30 24 18 12

Page Five -- Alpha3-8VentedColumnArrayModule150Watts.bb System Impedance (ohms/hz) ohms 80 70 0 50 40 30 20

Alpha 3-8 Sealed Column Array Module By Jerry McNutt, Eminence Speaker LLC 240 Watts; F3 at 187 Hz. Best used above 250 Hz. Each Module is a 4 ohm load. Stack them up for longer throw. Box Properties --Description-- Name: Type: Closed Box Shape: Prism, square --Box Parameters-- Vb = 0.275 cu.ft V(total) = 0.304 cu.ft Qtc = 0.22 QL = 20 F3 = 18. Hz Fill = normal C --External Dimensions-- A = 5.3 in B = 5.3 in C = 28. in --Internal Dimensions-- A = 4.3 in B = 4.3 in C = 27. in --Wall Thickness-- Front = 0.5 in Side = 0.5 in Driver Properties --Description-- Name: Alpha 3-8 Type: Standard one-way driver Company: Eminence Speaker LLC Comment: 3" Full Range Driver --Configuration-- No. of Drivers = 8 Mounting = Standard Wiring = Series-Parallel Drivers sum coherently = Yes --Mechanical Parameters-- Fs = 117. Hz Qms = 7.94 Vas = 0.95 liters [7.] Cms = 0.84 mm/n [0.5] Mms = 2.18 g [17.44] Rms = 0.2 kg/s [1.] Xmax = 2.4 mm Xmech = 4 mm P-Dia = 59.94 mm [19.5] Sd = 28.58 sq.cm [228.] P-Vd = 0.0077 liters [0.0542] --Electrical Parameters-- Qes = 0.53 Re = 5.12 ohms [2.5] Le = 0.11 mh [0.055] Z = 8 ohms [4] BL = 3.93 Tm [7.889] Pe = 30 watts [240] --Electromech. Parameters-- Qts = 0.497 no = 0.281 % [2.248] 1-W SPL = 8.3 [95.7] 2.83-V SPL = 88.57 [0.] A B File: Alpha3-8SealedColumnArrayModule240Watts.bb

Page Two -- Alpha3-8SealedColumnArrayModule240Watts.bb Box Parts Box Shape: Square Prism 1 Top, 1 Bottom: depth (c) = 28. in width (b) = 5.3, thickness = 0.5 in 1 Front, 1 Back: height (a) = 4.3 in width (d) = 4.3, thickness = 0.5 in 2 Sides: height (a) = 4.3 in depth (c) = 28., thickness = 0.5 in --Driver Mounting-- Mounting: Flush Aim: All drivers face same direction c top & bottom b d c a front & back sides

Page Three -- Alpha3-8SealedColumnArrayModule240Watts.bb Normalized Amplitude Response (-SPL/Hz) 0 - -12-18 -24-30 -3 Custom Amplitude Response (-SPL/Hz at 1 m) with 240 watts 128 122 11 1 4 98 92 8 Maximum Acoustic Power (-SPL/Hz at 1 m) 125 119 113 7 1 95 89 83

Page Four -- Alpha3-8SealedColumnArrayModule240Watts.bb Maximum Electric Input Power (W/Hz) watts 200 0 20 2 Cone Displacement (mm/hz) with 240 watts mm 1 14 12 8 4 2 System Impedance (ohms/hz) ohms 80 70 0 50 40 30 20