AC Line Filters SC Coils, Standard ype Overview he KEME SC Coils, Standard ype AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke Benefits Wide variety of sizes and specifications Inductances up to 8 mh Rated Currents up to 0 A DC Resistances as low as mω Part Number System SC- 0-200 ype Rated Current (A) Minimum Inductance (mh) SC- 0x- = x A (e.g., 02- = 2 A) x0- = x0 A (e.g., 0- = 0 A) xx- = xx A (e.g., 5- = 5 A) Note: Code 05 can equal 5 A as well as 4 A x00 = x mh (e.g., 200 = 2 mh) Note: mh can equal code 00 as well as code 0 One world. One KEME KEME Electronics Corporation P.O. Box 5928 Greenville, SC 290 84-9-00 www.kemet.com LF0005_SC /28/207
Dimensions Millimeters Vertical ype ( 5 A) Horizontal ype ( 0 A) 5±2.0 (a) 2 (b ) 5±2.0 4 42 Mounting Pitch (a) 2 (b) 4 Environmental Compliance All KEME AC Line Filters are RoHS Compliant. RoHS Compliant KEME Electronics Corporation P.O. Box 5928 Greenville, SC 290 84-9-00 www.kemet.com LF0005_SC /28/207 2
able Ratings & Part Number Reference Part Number Rated Current AC (A) Inductance (mh) Minimum DC Resistance/ Line (mω) Maximum Pin pitch listed above for reference only. Values not guaranteed. emperature Rise (K) Maximum Finished Dimensions (mm) (Maximum) (Maximum) Pin Pitch (reference) a b Wire Diameter (mm) Weight (g) Approximate SC-02-0 2 0 40 2.0.0 0. 5 SC-02-00 2 00 40 2.0 8.5 7 0. 5 SC-02-200 2 2 0 40 2.0 8.5 7 0. 5 SC-02-00 2 00 40 27.0 20.0 7 0. SC-02-500 2 5 00 45 27.0 20.0 7 0. 20 SC-02-800 2 8 50 40 4.0 2.0 7 20 0. 25 SC-05-00 5 50 40 25.0 8.5 7 0.8 20 SC-05-200 5 2 70 40 2.0 22.0 7 2 0.8 25 SC-05-500 4 5 80 50 4.0 2.0 7 2 0.8 0 SC-05-800 4 8 85 0 4.0 2.0 7 2 0.8 40 SC-0-00 0 20 40 4.0 24.0 22 2. 40 SC-0-200 0 2 28 40 47.0 27.0 0 0. 80 SC-5-00 5 2 40 49.0 27.0 5 5.8 00 SC-5-200 5 2 2 45 50.0 28.0 5 5.8 0 SC-20-00 20 8 45 0.0 0.0 40 40 2. 5 SC-0-00 0 40 2.0 5.0 55 20 2. 90 Specifications Item Rated Voltage Withstanding Voltage Insulation Resistance hermal Class Operating emperature Range Inductance Measurement Condition SC 250 VAC/VDC 2,400 V (2 seconds, between lines) > 00 MΩ at 500 VDC (between lines) A (05 C) 25 C to ( = 05 temperature rise) 00 khz, ma, KC547 Attenuation (Static Characteristics) and Circuit Diagram erminal Voltage (db) V=0 db 00 90 80 70 0 50 40 Circuit A. Switching power supply Without SC Coil With SC Coil 0.5.0 2.0 Frequency (MHz) erminal Voltage (db) V=0 db 00 B. Motor 90 Without SC Coil 80 70 0 With SC Coil 50 40 0.5.0 2.0 Frequency (MHz) Circuit LOAD Cx L L : SC-02-00 Cx : 0. F : 4700 pf LOAD Cx L L : SC-05-00 Cx : 0. F : 4700 pf KEME Electronics Corporation P.O. Box 5928 Greenville, SC 290 84-9-00 www.kemet.com LF0005_SC /28/207
Frequency Characteristics M 00K 02-200 0K K 02-00 00 0 02-0 K 0K 00K M 0M 0M M 00K 05-800 0K 05-500 K 05-200 00 0 05-00 K 0K 00K M 0M 0M M 00K 02-800 0K K 02-00 00 02-500 0 K 0K 00K M 0M 0M M 00K 0-200 0K 0-00 K 00 20-00 0 K 0K 00K M 0M 0M M 00K 5-200 0K 5-00 K 00 0-00 0 K 0K 00K M 0M 0M Notes on Use Shelf Life Use within months. If the product is used after a storage period of months or longer, confirm its solderability before use. Storage Condition Avoid storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. Avoid storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. Avoid storage near strong magnetic field, as such condition may magnetize the product. KEME Electronics Corporation P.O. Box 5928 Greenville, SC 290 84-9-00 www.kemet.com LF0005_SC /28/207 4
KEME Electronic Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the Information ) in this datasheet are subject to change. he customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEME Electronics Corporation s ( KEME ) knowledge of typical operating conditions for such applications, but are not intended to constitute and KEME specifi cally disclaims any warranty concerning suitability for a specifi c customer application or use. he Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEME with reference to the use of KEME s products is given gratis, and KEME assumes no obligation or liability for the advice given or results obtained. Although KEME designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEME is a registered trademark of KEME Electronics Corporation. KEME Electronics Corporation P.O. Box 5928 Greenville, SC 290 84-9-00 www.kemet.com LF0005_SC /28/207 5