SUPPORTING INFORMATION. for. Hybrids of iron-filled multi-wall carbon nanotubes and anticancer agents as potential

Similar documents
2017 Reaction of cinnamic acid chloride with ammonia to cinnamic acid amide

An Efficient Total Synthesis and Absolute Configuration. Determination of Varitriol

Tetrahydrofuran (THF) was distilled from benzophenone ketyl radical under an argon

Supplementary Note 1 : Chemical synthesis of (E/Z)-4,8-dimethylnona-2,7-dien-4-ol (4)

Supporting Information

SUPPLEMENTARY INFORMATION

Supporting Information for

Red Color CPL Emission of Chiral 1,2-DACH-based Polymers via. Chiral Transfer of the Conjugated Chain Backbone Structure

Effect of Conjugation and Aromaticity of 3,6 Di-substituted Carbazole On Triplet Energy

hydroxyanthraquinones related to proisocrinins

Supporting Information

Compound Number. Synthetic Procedure

Supporting Information

Supporting Information for

Supporting Information

Supporting Information. (1S,8aS)-octahydroindolizidin-1-ol.

Supporting Text Synthesis of (2 S ,3 S )-2,3-bis(3-bromophenoxy)butane (3). Synthesis of (2 S ,3 S

The First Asymmetric Total Syntheses and. Determination of Absolute Configurations of. Xestodecalactones B and C

Electronic Supplementary Information

Supporting Information

Supporting Information

Supplementary Information (Manuscript C005066K)

How to build and race a fast nanocar Synthesis Information

1G (bottom) with the phase-transition temperatures in C and associated enthalpy changes (in

Electronic Supplementary Information

Straightforward Synthesis of Enantiopure (R)- and (S)-trifluoroalaninol

Supporting Information

Synthesis and characterization of innovative well-defined difluorophosphonylated-(co)polymers by RAFT polymerization

All solvents and reagents were used as obtained. 1H NMR spectra were recorded with a Varian

Supporting Information

Drastically Decreased Reactivity of Thiols and Disulfides Complexed by Cucurbit[6]uril

Supporting Material. 2-Oxo-tetrahydro-1,8-naphthyridine-Based Protein Farnesyltransferase Inhibitors as Antimalarials

Electronic Supplementary Material (ESI) for Medicinal Chemistry Communications This journal is The Royal Society of Chemistry 2012

Synthetic Studies on Norissolide; Enantioselective Synthesis of the Norrisane Side Chain

Synthesis of Trifluoromethylated Naphthoquinones via Copper-Catalyzed. Cascade Trifluoromethylation/Cyclization of. 2-(3-Arylpropioloyl)benzaldehydes

Significant improvement of dye-sensitized solar cell. performance by a slim phenothiazine based dyes

Coupling of 6 with 8a to give 4,6-Di-O-acetyl-2-amino-2-N,3-O-carbonyl-2-deoxy-α-Dglucopyranosyl-(1 3)-1,2:5,6-di-O-isopropylidene-α-D-glucofuranose.

New Substrates and Enzyme Assays for the Detection of Mucopolysaccharidosis III (Sanfilippo Syndrome) Types A, B, C and D by Tandem Mass Spectrometry

Synthesis of hydrophilic monomer, 1,4-dibromo-2,5-di[4-(2,2- dimethylpropoxysulfonyl)phenyl]butoxybenzene (Scheme 1).

(Supplementary Information)

Supporting Information. for. Angew. Chem. Int. Ed. Z Wiley-VCH 2003

Supporting Information

Supporting Information. Membrane labeling and Immobilization via copper-free click chemistry

Electropolymerization of cobalto(5,10,15-tris(4-aminophenyl)- 20-phenylporphyrin) for electrochemical detection of antioxidant-antipyrine

Supporting Information. Table of Contents. 1. General Notes Experimental Details 3-12

Supporting Information for Synthesis of C(3) Benzofuran Derived Bis-Aryl Quaternary Centers: Approaches to Diazonamide A

Facile Multistep Synthesis of Isotruxene and Isotruxenone

Supplementary Information. for. Stable Supramolecular Helical Structure of C 6 -Symmetric

A Photocleavable Linker for the Chemoselective Functionalization of Biomaterials

Supporting Information For:

A supramolecular approach for fabrication of photo- responsive block-controllable supramolecular polymers

Supplementary Information

Supporting Information. Application of the Curtius rearrangement to the synthesis of 1'- aminoferrocene-1-carboxylic acid derivatives

SBA-15-functionalized sulfonic acid confined acidic ionic liquid: a powerful and water-tolerant catalyst for solvent-free esterifications

Supporting Information

Supplementary Figure 2. Full power on times. Histogram showing on times of bursts with 100 pm 1, 100 pm 2 and 1 nm Et 3 N at full laser power.

Regioselective Synthesis of 1,5-Disubstituted 1,2,3-Triazoles by reusable

SUPPLEMENTARY INFORMATION

Supporting Information. Vesicles of double hydrophilic pullulan and. poly(acrylamide) block copolymers: A combination

Supporting Information:

Facile Synthesis of Flavonoid 7-O-Glycosides

4023 Synthesis of cyclopentanone-2-carboxylic acid ethyl ester from adipic acid diethyl ester

Synthesis of fluorophosphonylated acyclic nucleotide analogues via Copper (I)- catalyzed Huisgen 1-3 dipolar cycloaddition

Figure S1 - Enzymatic titration of HNE and GS-HNE.

Supporting Information for:

Supporting Information. For. Organic Semiconducting Materials from Sulfur-Hetero. Benzo[k]fluoranthene Derivatives: Synthesis, Photophysical

Photooxidations of 2-(γ,ε-dihydroxyalkyl) furans in Water: Synthesis of DE-Bicycles of the Pectenotoxins

Scalable Synthesis of Fmoc-Protected GalNAc-Threonine Amino Acid and T N Antigen via Nickel Catalysis

Block: Synthesis, Aggregation-Induced Emission, Two-Photon. Absorption, Light Refraction, and Explosive Detection

Babak Karimi* and Majid Vafaeezadeh

Supporting Information for

Supporting Information For:

Supporting Information

A fluorescent ph probe for acidic organelle in living cells

Block copolymers containing organic semiconductor segments by RAFT polymerization

Molecular Imaging of Labile Iron(II) Pools in Living Cells with a Turn-on Fluorescent Probe

Supporting information

Supporting Online Material

Synthesis of Simple Diynals, Diynones, Their Hydrazones, and Diazo Compounds: Precursors to a Family of Dialkynyl Carbenes (R 1 C C C C C R 2 )

DNA Condensation With Spermine Dendrimers: Interactions in Solution, Charge Inversion, and Morphology Control Supporting Information

Electronic Supporting Information

Fluorescent Chemosensor for Selective Detection of Ag + in an. Aqueous Medium

Solvent-controlled selective synthesis of biphenols and quinones via oxidative coupling of phenols

Synthesis of Dihydroquinoline Based Merocyanines as Naked Eye and Fluorogenic sensors for Hydrazine Hydrate in Aqueous Medium

Synthesis of Secondary and Tertiary Amine- Containing MOFs: C-N Bond Cleavage during MOF Synthesis

Supporting Information for

Supporting Information

(Supplementary Information)

A Sumanene-based Aryne, Sumanyne

Supplemental material for: Concise Total Syntheses of (±)-Mesembrane and (±)-Crinane. Table of Contents

Synthesis, characterization and molecular recognition of bis-platinum terpyridine dimer. Supporting information

Supporting Information for: Direct Conversion of Haloarenes to Phenols under Mild, Transition-Metal-Free Conditions

Disubstituted Imidazolium-2-Carboxylates as Efficient Precursors to N-Heterocylic Carbene Complexes of Rh, Ir and Pd

Supporting Information

Experimental details

Ammonium-Bearing Dinuclear Copper(II) Complex: A Highly Selective and Sensitive Colorimetric Probe for Pyrophosphate

with EDCI (5.73 g, 30.0 mmol) for 10 min. Bromoethylamine hydrobromide (6.15

Supporting Information for

Selective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3

Supporting Information. New Strapped Porphyrins as Hosts for Fullerenes: Synthesis and Complexation Study

Transcription:

SUPPORTING INFORMATION for Hybrids of iron-filled multi-wall carbon nanotubes and anticancer agents as potential magnetic Drug Delivery Systems in vitro studies against human melanoma, colon carcinoma and colon adenocarcinoma Sławomir Boncel 1, *, Anna Pluta 1, Magdalena Skonieczna 2, Andrzej Gondela 1, Barbara Maciejewska 3, Artur P. Herman 1, Rafał G. Jędrysiak 1, Sebastian Budniok 1, Kamila Komędera 4, Artur Błachowski 4, Krzysztof Z. Walczak 1 1 Silesian University of Technology, Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Krzywoustego 4, 44-100 Gliwice, Poland 2 Silesian University of Technology, Institute of Automatic Control, Biosystems Group Department of Automatics, Electronics and Informatics, Akademicka 16, Gliwice, Poland 3 NanoBioMedical Centre, Adam Mickiewicz University, Umultowska 85, 61-614 Poznań, Poland 4 Pedagogical University, Institute of Physics, Mössbauer Spectroscopy Laboratory, Podchorążych 2, 30-084 Kraków, Poland 1

Synthesis of anticancer agents (and their pro-drugs) Scheme S1 Synthetic pathways towards anticancer agents and its precursors Synthesis of pure anticancer agents, their pro-drugs, MWCNT vehicles and drugnanotube hybrids 2-(4-azidobutoxy)-1,4-dihydroxyanthracene-9,10-dione = Purp-N 3 (2a) To a solution of 1,2,4-trihydroxyanthraquinone (purpurin) (256 mg, 1 mmol) in DMF (5.0 ml), a deprotonating agent 1,8-diazabicycloundec-7-ene (DBU) (145 mg, 0.95 mmol) was added and the resulting mixture was stirred at 70 C for 30 min. Next, 1-azido-4-bromobutane (1.5 mmol) was added and the stirring at 70 C was continued. The progress of the reaction was monitored by TLC (CHCl 3 ). The reaction mixture was evaporated to dryness and the residual oil was purified on a silica gel packed column using CHCl 3 as the eluent. The fractions containing product were collected, combined and evaporated giving crystalline 2

orange solids. 1 H NMR (CDCl 3, 300 MHz) δ: 1.81-1.90 (m, 2H, H-3 ), 1.98 (m, 2H, H-2 ), 3.44 (t, J=6.6 Hz, 2H, H-4 ), 4.14 (t, J=6.6 Hz, 2H, H-1 ), 6.62 (s, 1H, H-3), 7.75-7.84 (m, 2H, H-5, H-6), 8.26-8.31 (m, 2H, H-7, H-8), 13.40 (s, 1H, 4-OH), 13.47 (s, 1H, 1-OH). 13 C NMR (CDCl 3, 75 MHz), δ: 25.7, 26.0, 51.1, 68.9, 106.1, 107.4, 112.4, 126.8, 126.9, 133.2, 133.7, 134.0, 134.5, 150.4, 156.9, 160.7, 184.3, 187.1. ESI-MS m/z=352.6 [M-H + ]. 2-(3-(5-fluorouracil-1yl)propanoyloxy)ethyl 6-azidohexanoate = 5-FU-N 3 (2b) To a solution of 2-hydroxyethyl 3-(5-fluorouracil-1-yl)propanoate [1] (0.492 g, 2 mmol) in anhydrous DMF (10 ml) placed in a round-bottom flask (25 ml) on magnetic stirrer, 6- azidohexanoic acid (0.314 g, 2 mmol), 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM, 1.106 g, 4 mmol), N-methylmorpholine (NMM) (0.202 g, 2 mmol, d=0.91 g ml -1 ). The reaction mixture was stirred for 24 h. Next, DMF was removed from the post-reaction mixture using rotary evaporator and the solid residue was purified by column chromatography. A white semi-solid was obtained in 28% yield (0.216 g). 1 H NMR (400 MHz, CDCl 3 ), δ ppm): 9.98 (br s, 1H, N-H), 7.43 (d, 1H, J HF =5.6 Hz, H-6), 4.31 (m, 4H, -OCH 2 CH 2 O-), 3.99 (t, 2H, J=6.0 Hz, >NCH 2 ), 3.28 (t, 2H, J=7.2 Hz, -CH 2 N 3 ), 2.83 (t, 2H, J=6.0 Hz, >NCH 2 CH 2 -), 2.35 (t, 2H, J=7.2 Hz, CH 2 CO), 1.64 (m, 4H, 4-CH 2, 2- CH 2 ), 1.41 (m, 2H, 3-CH 2 ). 13 C NMR (100 MHz, CDCl 3 ), δ ppm): 173.1, 171.0, 157.5, 149.6, 141.1, 130.1 (d, J CF =32.7 Hz), 63.0, 61.6, 51.1, 45.3, 33.7, 32.6, 28.4, 26.0, 24.2. 2-(6-Aminohexyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione (2c) 4-(N,N-Dimethylamino)pyridine (DMAP) (0.001 g) was introduced into a solution of hexylene-1,6-diamine (2.320 g, 20.0 mmol) in anhydrous EtOH (50 ml) in a round-bottomed flask (100 ml). The mixture was refluxed under inert atmosphere (nitrogen) and then, within the next 1 h, 1,8-naphthalenedicarboxylic acid anhydride (0.198 g, 1.0 mmol) was added in small portions while a thorough stirring. The reaction mixture was refluxed for 4 h at monitoring the progress using TLC. The volatiles were removed using rotary evaporator and 3

the product was isolated using column chromatography. The reaction was performed using 1,6-hexylenediamine (2.320 g, 20.0 mmol), anhydrous EtOH (50 ml) and 1,8- naphthalenedicarboxylic acid anhydride (2.000 g, 10.0 mmol). Yield 1.642 g (55%) (also 0.930 g of bisnaphthalimide derivative was obtained); white crystals, mp 70-71 C; 1 H NMR (CDCl 3, 600 MHz), δ ppm): 1.41-1.48 (m, 8H, H-3, H-4, H-5, NH 2 ), 1.75 (dd, 2H, J=7.4; 15.0 Hz, H-2 ), 2.68 (dd, 2H, J=7.2; 13.8 Hz, H-6 ), 4.18 (dd, 2H, J=7.4; 15.0 Hz, H- 1 ), 7.75 (dd, 2H, J=7.2; 13.2 Hz, H-3, H-6), 8.21 (dd, 2H, J=1.2; 3.6 Hz, H-4, H-5), 8.60 (dd, 2H, J=4.2; 7.2 Hz, H-2, H-7). 13 C NMR (CDCl 3, 600 MHz), δ ppm): 26.71 (C-4 ), 27.01 (C- 3 ), 28.21 (C-2 ), 33.86 (C-5 ), 40.49 (C-1 ), 42.28 (C-6 ), 122.89 (C-9), 127.06 (C-1, C-8), 128.30 (C-10), 131.32 (C-3, C-6), 131.74 (C-2, C-7), 133.98 (C-4, C-5), 164.35 (C-1, C-3 ). t-butyl 6-(6-morpholino-1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)hexylcarbamate (2d) To a solution of N-Boc-1,6-diaminohexane (0.65 g, mmol) in EtOH (15 ml) 4-morpholino- 1,8-naphthalenedicarboxylic acid anhydride [2] (0.71 g, mmol) and DMAP (50 mg) were added. The reaction mixture was refluxed for 2 h. The solvent was removed using rotary evaporator and the residue was recrystallized from MeOH yielding yellow fluorescent precipitate. Yield 88% (1.059 g). 1 H NMR (600 MHz, CDCl 3 ): δ 8.59 (dd, J = 7.3, 1.2 Hz, 1H, H-7), 8.53 (d, J = 8.1 Hz, 1H, H-2), 8.42 (dd, J = 8.4, 1.2 Hz, 1H, H-5), 7.70 (dd, J = 8.4, 7.3 Hz, 1H, H-6), 7.23 (d, J = 8.1 Hz, 1H, H-3), 4.56 (s, 1H, NH), 4.18 4.14 (m, 2H, H-1 ), 4.04 4.00 (m, 4H, H-3 ), 3.29 3.25 (m, 4H, H-2 ), 3.14 3.06 (m, 2H, H-6 ), 1.77 1.70 (m, 2H, H-2 ), 1.55 1.47 (m, 2H, H-5 ), 1.45 1.38 (m, 13H, H-3, H-4, Me). 13 C NMR (151 MHz, CDCl 3 ) δ 164.41, 163.96, 155.98, 155.59, 132.49, 131.16, 129.99, 129.90, 126.19, 125.85, 123.41, 117.29, 114.98, 67.00, 53.48, 40.52, 40.12, 29.94, 29.93, 28.46, 28.04, 26.72, 26.47. 4

t-butyl 6-(5-nitro-1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)hexylcarbamate (2e) To a solution of N-Boc-1,6-diaminohexane (1.28 g, 5.26 mmol) in anhydrous EtOH (10 ml) 3-nitro-1,8-naphthalenedicarboxylic acid anhydride (1.23 g, 5.53 mmol) and DMAP (50 mg) were added. The reaction mixture was refluxed for 3 h. The reaction mixture was cooled down and the precipitate was washed with EtOH. The raw product was recrystallized from MeOH (18 ml) to give product as white needles. Yield 69% (1.61 g). 1 H NMR (600 MHz, CDCl 3 ) δ: 9.31 (d, J = 2.2 Hz, 1H, H-2), 9.13 (d, J = 2.2 Hz, 1H, H-4), 8.78 (dd, J = 7.3, 1.2 Hz, 1H, H-7), 8.42 (ddd, J = 8.2, 1.2, 0.4 Hz, 1H, H-5), 7.95 (dd, J = 8.2, 7.3 Hz, 1H, H-6), 4.54 (s, 1H, NH), 4.24 4.17 (m, 2H, H-1 ), 3.15 3.07 (m, 2H, H-6 ), 1.79 1.71 (m, 2H, H- 2 ), 1.56 1.48 (m, 2H, H-5 ), 1.47 1.36 (m, 13H, H-3, H-4, Me). 13 C NMR (151 MHz, CDCl 3 ) δ 163.10, 162.48, 155.98, 146.45, 135.47, 134.40, 131.04, 130.22, 129.08, 128.86, 124.78, 124.24, 123.29, 40.70, 40.49, 29.95, 28.45, 27.93, 26.68, 26.43. tert-butyl 6-(6-nitro-1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)hexylcarbamate (2f) To a solution of N-Boc-1,6-diaminohexane (0.65 g, mmol) in anhydrous EtOH (10 ml) 4- nitro-1,8-naphthalenedicarboxylic acid anhydride (0.75 g, mmol) and DMAP (50 mg) were added. The reaction mixture was refluxed for 1.5 h. The formed precipitate after cooling down the reaction mixture was filtered off and recrystallized from EtOH yielding product (0.966 g). Additionally, solvent was removed from the filtrate using rotary evaporator and the precipitate was recrystallized from EtOH yielding additional fraction of product (0.090 g). Yield 78% (1.06 g). 1 H NMR (600 MHz, CDCl 3 ) δ: 8.84 (dd, J=8.7, 1.1 Hz, 1H, H-5), 8.73 (dd, J=7.3, 1.1 Hz, 1H, H-7), 8.69 (d, J = 8.0 Hz, 1H, H-3), 8.40 (d, J=8.0 Hz, 1H, H-2), 7.99 (dd, J=8.7, 7.3 Hz, 1H, H-6), 4.53 (s, 1H, NH), 4.23-4.12 (m, 2H, H-1 ), 3.17-3.04 (m, 2H, H-6 ), 1.79-1.70 (m, 2H, H-2 ), 1.55-1.47 (m, 2H, H-5 ), 1.48-1.35 (m, 13H, H-3, H-4, Me). 13 C NMR (CDCl 3 ) δ: 163.30, 162.48, 155.95, 149.60, 132.44, 129.93, 129.80, 129.30, 129.13, 127.03, 123.88, 123.71, 123.07, 40.69, 40.48, 29.94, 28.45, 27.91, 26.68, 26.42. 5

Synthesis of Fe@O-MWCNTs (1b) from Fe@MWCNTs (1a) Fe@MWCNTs (0.50 g) were placed in round-bottom flask and 300 ml of a mixture containing concentrated sulphuric (VI) (98%) and nitric (V) acid (68%) prepared in a ratio 3:1 (v/v) was added. The flask was equipped with a reflux condenser and the reaction mixture was heated to boiling and a vigorous evolution of brown nitrogen (IV) oxide started. The boiling was continued for 20 minutes. Subsequently, the mixture was allowed to cool to room temperature and was quenched in a beaker with 500 ml of distilled water. Then, the postreaction mixture was filtrated using a Teflon membrane (0.45 µm pore size, EMD Milipore) under reduced pressure and the precipitate was rinsed with deionised water until neutral ph. The product Fe@O-MWCNTs was dried in an electric dryer at 80 C under atmospheric pressure for 120 h. Anchoring anticancer agents and their pro-drugs onto the nanotube vehicles MWCNT>N-Purp (3aa) MWCNTs (50 mg) were added to a solution of Purp-N 3 (2a) (100 mg, 0.3 mmol) in 1,1,2,2- tetrachloroethylene (TCE, 15 ml), and the reaction mixture was ultrasonicated for 1 h. The resulting dispersion was then refluxed for 4 h and allowed to cool to room temperature. Solid product was filtered off over a PTFE membrane (0.45 µm pore size), washed thoroughly with methanol (120 ml) and chloroform (120 ml) and dried in a laboratory oven for 24 h at 100 C. MWCNT>N-5FU (3ab) MWCNTs (27 mg) and tetrachloroethylene (TCE) (14 ml) were introduced to a roundbottom flask (50 ml) and the flask was placed in an ultrasonic bath for 15 min. The appropriate azide (108 mg, 0.28 mmol) was dissolved in TCE and the solution was added to the reaction mixture. The mixture was refluxed for 8 h. The drug-nanotube hybrid was filtered 6

off from the post-reaction mixture (Teflon filter 0.45 µm) and washed with copious amounts of chloroform (250 ml) and MeOH (250 ml) until colorless filtrate. The product was dried in the electric oven at 75 C overnight; yield 66 mg. MWCNT-COO Phth(CO) 2 N-NH + 3 (3bc_i) To 2-(6-aminohexyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione (2bc) (0.071 g, 0.23 mmol) dissolved in DMF (2.9 ml), O-MWCNTs (0.040 g) was added followed by the addition of DMF (38 ml). The reaction mixture was ultrasonicated for 20 h. Afterwards, the precipitate was filtered off, washed with MeOH (160 ml) and CHCl 3. (100 ml). The product was dried in an electric oven at 70 C. The drug-nanotube hybrid was received in yield of 0.041 g. MWCNT-CONH-N-(OC) 2 Phth (3bc_c) To O-MWCNTs (0.100 g) SOCl 2 (1.30 g, 109 mmol, 8.00 ml) was added. The dispersion was ultrasonicated for 30 min with a drying tube placed at the outlet of flask, and then for 21 h cork-stopped. The volatiles were removed by rotary evaporator (1 h, 40 C) and subsequently using a diaphragm vacuum pump (30 min, 6 mmhg). The solid residue was combined with a mixture of 2-(6-aminohexyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione (0.100 g, 0.34 mmol), triethylamine (0.728 g, 7.19 mmol, 1.00 ml) and DMF (8 ml), and it was ultrasonicated for 7 h. Afterwards, the solid was filtered off and washed with EtOH (120 ml) and CHCl 3 (ml). The product was dried at 90 C. The drug-nanotube hybrid was received in yield of 0.104 g. MWCNT-CONH-N-(OC) 2 Phth-M (3bd) To t-butyl 6-(6-morpholino-1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)hexylcarbamate (0.240 g, 0.50 mmol), trifluoroacetic acid (0.199 g, 1.75 mmol, 0.13 ml) and dichloromethane (5 ml) were added. The reaction mixture was stirred for 6 days. After the reaction was completed, the volatiles were removed using rotary evaporator (40 min, 50 C). 7

Afterwards, dispersion of O-MWCNTs (0.234 g) in DMF (30 ml) was added to the reaction mixture. The mixture was ultrasonicated for 10 min with a subsequent addition of NMM (0.051 g, 0.50 mmol, 0.07 ml). Then DMT-MM (0.152 g, 0.55 mmol) was added and the reaction mixture was ultrasonicated for 24 h. The product was filtered off and washed with MeOH (190 ml) and CHCl 3 (95 ml). The product was dried at 70 C. The drug-nanotube hybrid was received in yield of 0.214 g. MWCNT-CONH-N-(OC) 2 Phth-3NO 2 (3be) To Boc-protected 2-(6-aminohexyl)-5-nitro-1H-benzo[de]isoquinoline-1,3(2H)-dione (0.800 g, 1.81 mmol), trifluoroacetic acid (1.787 g, 15.67 mmol, 1.20 ml) and dichloromethane (15 ml) were added. The reaction mixture was stirred for 5 days. Then, the volatiles were removed using a rotary evaporator (45 min, 50 C). Afterwards, to the reaction mixture, dispersion of O-MWCNTs (0.702 g) in DMF was added (40 ml). The reaction mixture was ultrasonicated for 10 min with a subsequent addition of NMM (0.182 g,1.81 mmol, 0.22 ml). Afterwards, 0.548 g (1.98 mmol) of DMT-MM was added and the reaction mixture was ultrasonicated for 46 h. The solid product was filtered off and washed with CHCl 3 (210 ml) and CH 2 Cl 2 (50 ml). Product was dried in 70 C. The drug-nanotube hybrid was received in yield of 0.834 g. MWCNT-CONH-N-(OC) 2 Phth-3NO 2 (3bf) To 2-(6-aminohexyl)-6-nitro-1H-benzo[de]isoquinoline-1,3(2H)-dione (0.800 g, 1.81 mmol), trifluoroacetic acid (1.787 g, 15.67 mmol, 1.20 ml) and dichloromethane (15 ml) were added. The reaction mixture was stirred for 5 days. The volatiles were removed using a rotary evaporator (45 min, 50 C). Afterwards, to the reaction mixture, dispersion of O-MWCNTs (0.708 g) in DMF (40 ml) was added. The reaction mixture was ultrasonicated for 10 min with a subsequent addition of NMM (0.182 g, 1.81 mmol, 0.22 ml). Afterwards, DMT-MM (0.548 g, 1.98 mmol) was added and the reaction mixture was ultrasonicated for 46 h. Then 8

the solid product was filtered off through a PTFE membrane filter and washed with CHCl3 (210 ml) and CH2Cl2 (50 ml). The product was dried at 70 C. The drug-nanotube hybrid was received in yield of 0.780 g. 20 µm 20 µm 20 µm Fig. S1 Confocal microscopy images of drug-nanotube hybrids in the presence of cancer cells; the samples were incubated for 24 h under standard conditions at 5 µg/ml. Upper panel: Me45 vs MWCNT>N-5FU (3ab); Middle panel: HCT116+ vs MWCNT>N-5FU (3ab); Below panel: Caco-2 vs MWCNT-CONH-N-(OC)2Phth4NO2 (3bf); From left to right: cell nuclei dyed by ethidium bromide (red); areas dyed by drug-nanotube hybrids and anticancer agents released therefrom (blue); merged images. 9

References [1] Boncel, S.; Osyda, D.; Walczak, K. Z. Beilstein J. Org. Chem. 2007, 3, 40. [2] Synthesized via a modified method from: Wu, J.; Zawistowski, A.; Ehrmabb, M.; Yi, T.; Schmuck, C. J. Am. Chem. Soc. 2011, 133, 9720 9723. 10