Connecting Cables for Connector-Terminal lock Conversion Units (Shielded) XWZ CSM_XWZ_DS_E Connect Connector-Terminal lock Conversion Units (XW@) to I/O Units for Programmable Controllers with one touch. Ordering Information For -point, Connector-type I/O Units for Programmable Controllers XWZ-@@@ (For XWD-0G/XW-0G@/-0G-T/-0G-D/ XWC-0G-IN/0G-IO/XWE-0G-IN/ XWF-0G-IN/-OUT/XWN-0G-IN) 0. XWZ-00.0 XWZ-00. XWZ-0.0 XWZ-00.0 XWZ-00.0 XWZ-00 0.0 XWZ-00.0 XWZ-M 0.0 XWZ-0M
XWZ For -point, Connector-type I/O Units (Group ) for Programmable Controllers For -point, Connector-type I/O Units for Programmable Controllers XWZ-@@@ (For XWD-0G/XW-0G@) XWZ-@@@- (For XWF-0G-IN) Type 0. XWZ-00 Normal wiring Reverse wiring.0 XWZ-00. XWZ-0.0 XWZ-00.0 XWZ-00.0 XWZ-00 0.0 XWZ-00.0 XWZ-M 0.0 XWZ-0M 0. XWZ-00-R.0 XWZ-00-R. XWZ-0-R.0 XWZ-00-R.0 XWZ-00-R.0 XWZ-00-R Type.0 XWZ-00-. XWZ-0- Normal wiring.0 XWZ-00-.0 XWZ-00-.0 XWZ-00- For -point, Connector-type Input Units (Group ) for Programmable Controllers For -point, Connector-type Input Units for Programmable Controllers XWZ-@@@D.0 0. XWZ-00D.. XWZ-0D.0. XWZ-00D.0. XWZ-00D.0. XWZ-00D 0.0. XWZ-00D.0. XWZ-MD 0.0. XWZ-0MD CN (0 mm) Yellow lack (00 mm) CN 0-pole Cable with Discrete-wire Press-fit Terminals XWZ-@@@F.0 XWZ-00F. XWZ-0F.0 XWZ-00F.0 XWZ-00F.0 XWZ-00F Forked terminals (M.) 0.0 XWZ-00F Devices.0 XWZ-MF 0.0 XWZ-0MF 00 (mm)
XWZ For -point, Connector-type Output Units (Group ) for Programmable Controllers For -point, Connector-type Output Units for Programmable Controllers XWZ-@@@.0 0. XWZ-00.. XWZ-0.0. XWZ-00.0. XWZ-00 (0 mm) Green CN.0. XWZ-00 CN 0.0. XWZ-00.0. XWZ-M 0.0. XWZ-0M White (00 mm) For -point, Connector-type I/O Units for Programmable Controllers XWZ-@@@H- (For CS-series I/O Unit Connection) Special Connecting Cables * Cable length (m) 0. XWZ-00H-.0 XWZ-00H-. XWZ-0H-.0 XWZ-00H-.0 XWZ-00H-.0 XWZ-00H-.0 XWZ-00H- 0.0 XWZ-00H-.0 XWZ-00H-G. XWZ-0H-G.0 XWZ-00H-G.0 XWZ-00H-G.0 XWZ-00H-G *Up to two cables required for each Programmable Controller I/O Unit. Note: CS signal names connected to the XW/D are different for the XWZ-@@@H-@ and the XWZ-@@@H-@G. Refer to the I/O Signal Tables on page. XWZ-@@@H- (For CS-series I/O Unit Connection) Special Connecting Cables * Cable length (m).0 0. XWZ-00H-.. XWZ-0H-.0. XWZ-00H-.0. XWZ-00H-.0. XWZ-00H- 0.0. XWZ-00H-.0 0. XWZ-00H-G.. XWZ-0H-G.0. XWZ-00H-G.0. XWZ-00H-G.0. XWZ-00H-G *Up to two cables required for each Programmable Controller I/O Unit. Note: CS signal names connected to the XW/D are different for the XWZ-@@@H-@ and the XWZ-@@@H-@G. Refer to the I/O Signal Tables on page. CN (0 mm) Yellow lack (00 mm) inear lengths (not including bends) CN
XWZ XWZ-@@@H- (For CS-series I/O Unit Connection) Special Connecting Cables * Cable length (m) C.0 0..0 XWZ-00H-... XWZ-0H-.0..0 XWZ-00H-.0..0 XWZ-00H-.0..0 XWZ-00H- 0.0. 0.0 XWZ-00H- *Up to two cables required for each Programmable Controller I/O Unit. CN inear lengths (not including bends) C (00 mm) (0 mm) Gray Yellow lack (00 mm) CN CN For -point, MI Connector-type I/O Units for Programmable Controllers XWZ-@@@K 0. XWZ-CK 0. XWZ-C0K.0 XWZ-00K. XWZ-0K.0 XWZ-00K.0 XWZ-00K.0 XWZ-00K XWZ-@@@N.0 0. XWZ-00N.. XWZ-0N.0. XWZ-00N.0. XWZ-00N.0. XWZ-00N 0.0. XWZ-00N.0. XWZ-MN 0.0. XWZ-0MN XWZ-@@@X 0. XWZ-C0X.0 XWZ-00X.0 XWZ-00X.0 XWZ-00X.0 XWZ-00X 0.0 XWZ-00X CN (0 mm) Green lack (00 mm) inear lengths (not including bends) CN
Ratings and Specifications XWZ Rated current Rated voltage VC VDC Contact resistance 0 mω max. (at 0 mv, 00 m max.) * Insulation resistance 00 MΩ min. (at 00 VDC) Dielectric strength 00 VC for min (leakage current: m max.) * mbient operating temperature 0 to 0 C *. Contact resistance for the Connector. *. Dielectric strength for the Connector. Materials and Finish Item Part name Materials and Finish Housing XGM-00 Cover Fiber-glass reinforced PT resin (UV-0)/black XGM-00 Mating end Phosphor bronze/nickel base, 0.-μm gold plating Contacts Press-fit end Phosphor bronze/nickel base,.0-μm tin plating Connectors XGT-00/00 Strain Relief Fiber-glass reinforced PT resin (UV-0)/black Housing Polyester resin (UV-0)/black FCN-J0-U/F * Mating end Copper alloy/gold plated Contacts FCN-J00-U/F Press-fit end Copper alloy/tin plated Connecting screw Steel/nickel plated Cable U Interface Cable WG/Shielded Crimp terminal Forked crimp terminal. Y S. or the equivalent Note: These housings, contacts, and connecting screws are made by Fujitsu.
ppearance and s XWZ For -point, Connector-type I/O Units for Programmable Controllers XWZ-@@@ (For XWD-0G/XW-0G@/-0G-T/-0G-D/ XWC-0G-IN/0G-IO/XWE-0G-IN/ XWF-0G-IN/-OUT/XWN-0G-IN) FCNJ0-U/F Triangular mark 0 0 NC 0 For -point, Connector-type I/O Units (Group ) for Programmable Controllers For -point, Connector-type I/O Units for Programmable Controllers XWZ-@@@ (For XWD-0G/XW-0G@) Normal wiring FCNJ00-U/F XGM-00-T Triangular mark Reverse wiring FCNJ00-U/F 0 0 XGM-00-T Triangular mark 0 0 0 0 0 0 0 0 0 0
XWZ XWZ-@@@- (For XWF-0G-IN) FCNJ00-U/F 0 0 0 0 XGM-00-T 0 0 0 0 For -point, Connector-type Input Units (Group ) for Programmable Controllers For -point, Connector-type Input Units for Programmable Controllers XWZ-@@@D FCNJ00-U/F CN 0 0 0 0 NC 0 Note: XWZ-R Cables for I/O Relay Terminals have different wiring and cannot be used with the XWC. NC CN Triangular mark 0 NC FCNJ00-U/F CN 0 0 0 0 CN 0 0 0 0
XWZ 0-pole Cable with Discrete-wire Press-fit Terminals XWZ-@@@F Connector Pin No. Table Forked terminal No. of cores Insulation color Dot marks Dot color Connector pin No. lue @ Red lue @ lack 0 Forked terminals (M.) 0 Pink @ Red Pink @ lack Green @ Red Green @ lack Orange @ Red Orange @ lack Gray @ Red 0 Gray @ lack 0 Triangular mark lue @@ Red lue @@ lack Pink @@ Red Pink @@ lack Green @@ Red Green @@ lack Orange @@ Red Orange @@ lack Gray @@ Red 0 0 Gray @@ lack 0 For -point, Connector-type Output Units (Group ) for Programmable Controllers For -point, Connector-type Output Units for Programmable Controllers XWZ-@@@ FCNJ00-U/F CN 0 0 0 0 XGM-00 CN 0 0 XGM-00 0 0
XWZ For -point, Connector-type I/O Units for Programmable Controllers XWZ-@@@H (For CS-series I/O Unit Connection) XWZ-@@@H- XWZ-@@@H- XWZ-@@@H- I/O Signal Tables XWZ-@@@H-@ Connecting Cables XWZ-@@@H- XWZ-@@@H- XWZ-@@@H- XWZ-@@@H-@G/XWZ-R@@@C-@@@-@@@ Connecting Cables XWZ-R@@@C-@@@-@@@ XWZ-@@@H-G XWZ-@@@H-G (Example Using CN on CSW-OD) XW@-0G@ XW@-0G@ XW-0G@ XW@-0G@ XW@-0G@ Word N () Word N+ (CN) Word N+ (CN) 0 COM NC 0 COM NC 0 COM NC 0 0 0 +V NC 0 0 0 +V NC Note: The XWZ-@@@H-@G I/O signal arrangement is oriented the same as the XWZ-R Cables for I/O Relay Terminals. 0 0 0 +V NC Word N () Word N+ () Word N+ (CN) 0 COM NC 0 COM NC 0 COM NC 0 0 0 0 0 +V NC 0 +V NC XW@-0G@ 0 0 0 +V NC Word N () Word N+ () Word N+ () 0 COM 0 COM 0 COM NC NC NC 0 0 0 0 0 0 0 +V 0 +V 0 +V NC NC NC Word N () Word N+ (CN) Word N+ (CN) +V NC 0 +V NC 0 +V NC 0 0 0 NC COM 0 0 0 NC COM 0 0 0 0 0 NC COM 0 NC COM 0 0 0 NC COM 0 XW@-0G@ Word N () Word N+ () Word N + (CN) +V NC 0 +V NC 0 +V NC 0 XW-0G@ 0 0 NC COM 0 Word N () Word N+ () Word N+ () +V NC 0 +V NC 0 +V NC 0 0 0 0 0 0 0 NC COM 0 NC COM 0 NC COM 0
XWZ For -point, MI Connector-type I/O Units for Programmable Controllers XWZ-@@@K XWZ-@@@N XGM-00-T 0 XGM-00-T XGM-00-T 0 0 0 0 0 0 XWZ-@@@X Note: Connector pins are connected -to- so that pin numbers correspond. 0 CN 0 0 Note: Connector pins are connected -to- so that pin numbers correspond. 0
Terms and Conditions greement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) imitations. OMRON MKES NO WRRNTY OR REPRESENTTION, EXPRESS OR IMPIED, OUT NON-INFRINGEMENT, MERCHNTIITY OR FITNESS FOR PRTICUR PURPOSE OF THE PRODUCTS. UYER CKNOWEDGES THT IT ONE HS DETERMINED THT THE PRODUCTS WI SUITY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) uyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with uyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit uyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by uyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. ny advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. imitation on iability; Etc. OMRON COMPNIES SH NOT E IE FOR SPECI, INDIRECT, INCIDENT, OR CONSEQUENTI DMGES, OSS OF PROFITS OR PRODUCTION OR COMMERCI OSS IN NY WY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CIM IS SED IN CONTRCT, WRRNTY, NEGIGENCE OR STRICT IIITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the uyer s application or use of the Product. t uyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. uyer shall be solely responsible for determining appropriateness of the particular Product with respect to uyer s application, product or system. uyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR N PPICTION INVOVING SERIOUS RISK TO IFE OR PROPERTY OR IN RGE QUNTITIES WITHOUT ENSURING THT THE SYSTEM S WHOE HS EEN DESIGNED TO DDRESS THE RISKS, ND THT THE OMRON PRODUCT(S) IS PROPERY RTED ND INSTED FOR THE INTENDED USE WITHIN THE OVER EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. ctual performance is subject to the Omron s Warranty and imitations of iability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial utomation Company http://www.ia.omron.com/ 0. In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation 0 ll Right Reserved.