Section 5.1 Scientific Notation and Units Objectives

Similar documents
Chapter 5 Measurements and Calculations Objectives

Chapter 2 Measurements & Calculations. Quantity: A thing that can be measured. ex. Length (6.3 ft), mass (35 kg), and time (7.2 s)

CHAPTER 2: MEASUREMENTS IN CHEMISTRY

Chemistry 11. Unit 2 : Introduction to Chemistry

Chapter 2. Measurements and Calculations

2 Standards for Measurement. Careful and accurate measurements of ingredients are important both when cooking and in the chemistry laboratory!

Name: Class: Date: General Organic and Biological Chemistry 7th Edition Stoker SOLUTIONS MANUAL

CHAPTER TWO: MEASUREMENTS AND PROBLEM SOLVING

Introduction to Chemistry

Ch. 2 Notes: ANALYZING DATA MEASUREMENT NOTE: Vocabulary terms are in boldface and underlined. Supporting details are in italics.

Worksheet 1 Units, Signifiant Figures, Dimensional Analysis, & Density

PREFIXES AND SYMBOLS SI Prefixes you need to know by heart

Everyday Conversion: Money

International System of Units (SI)

Worksheet 2 Units, Signifiant Figures, Dimensional Analysis, & Density

Precision, Accuracy Measurements, Units, Scientific Notation

5) If you count 7 pennies, you can only report one significant figure in that measurement. Answer: FALSE Diff: 1 Page Ref: 2.3

Co Curricular Data Analysis Review

Ch. 2 Notes: ANALYZING DATA MEASUREMENT NOTE: Vocabulary terms are in boldface and underlined. Supporting details are in italics.

MEASUREMENTS. Significant Figures

Pre-Lab 0.2 Reading: Measurement

Introduction. The Scientific Method and Measurement

Chapter 2 Measurements and Solving Problems

Chapter 5 Assessment. 164 Chapter 5 Measurements and Calculations. 8. Write each of the following numbers in standard scientific notation. a.

1.1 - Scientific Theory

Lesson 1.1 MEASUREMENT, UNITS, SCIENTIFIC NOTATION, AND PRECISION

CHEM 100 Principles Of Chemistry. Chapter 2 - Quantitative Science

Chapter 2 Measurement and Problem Solving

International System of Units (SI)

Notes: Measurement and Calculation

Measurements in Chemistry Chapter 2

Tools of Chemistry. Measurement Scientific Method Lab Safety & Apparatus

Defining Physical Science

What is Physics? It is a Science

SPH3U Measurement and Analysis Mr. LoRusso Introduction

Measurements in Chemistry Chapter 2

Scientific Notation Review

Measurements in Science

Chapter 1 (Part 2) Measurements in Chemistry 1.6 Physical Quantities

Law vs. Theory. Steps in the Scientific Method. Outcomes Over the Long-Term. Measuring Matter in Two Ways

Advanced Physics Summer Assignment.

Name: Chapter 2: Analyzing Data Note Taking Guide This worksheet is meant to help us learn some of the basic terms and concepts of chemistry.

PREFIXES AND SYMBOLS SI Prefixes you need to know by heart

Unit I: Measurements A. Significant figures B. Rounding numbers C. Scientific notation D. Using electronic calculators E.

Accelerated Chemistry Study Guide What is Chemistry? (Chapter 1)

Accuracy of Measurement: how close your measured value is to the actual measurement

Example 3: 4000: 1 significant digit Example 4: : 4 significant digits

Name: Measurements and Calculations (Chapter 3 and 4) Notes

Unit Conversions. O Keefe - LBHS

Problem Solving - The Dimensional Analysis Method

Chemistry Basic Science Concepts. Observations: are recorded using the senses. Examples: the paper is white; the air is cold; the drink is sweet.

Name Date Class MEASUREMENTS AND THEIR UNCERTAINTY

MEASUREMENT AND PROBLEM SOLVING. Chapter 3 & 4

2 Standards of Measurement

Measurements in Chemistry

Chemistry 104 Chapter Two PowerPoint Notes

General Chemistry I Introductory Concepts. Units, dimensions, and mathematics for problem solving

Name /100. MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Chapter 2 Measurement and Problem Solving. What Is a Measurement? Scientific Notation 8/20/09. Introductory Chemistry, 3 rd Edition Nivaldo Tro

Chapter 3 Scientific Measurement

WHAT IS CHEMISTRY? Chemistry 51 Chapter 1. Chemistry is the science that deals with the materials of the universe, and the changes they undergo.

Scientific Problem Solving

Chemistry I Chapter 3 Scientific Measurement

Number vs. Quantity. Quantity - number + unit UNITS MATTER!! for a measurement to be useful, must include both a number and unit

Regents Chemistry NOTE PACKET

Chapter 2: Measurements and Problem Solving

Chapter 2a. Measurements and Calculations

Scientific Measurement

PS 300 Spring 2019 Lecture 2

General Chemistry Unit 8 Measurement ( )

The Metric System, Measurements, and Scientific Inquiry (Chapter 23)

Measurement and Units. An Introduction to Chemistry By Mark Bishop

Table One. Mass of a small package using three different measurement methods

Syllabus Tutors Review from previous class. Resources. Lecture: MW 5:30PM-6:50PM Room 425

Chem 140 Section C Instructor: Ken Marr. Chem 140 Section A Instructor: Ken Marr. Chem 140 Section E Instructor: Ken Marr. Day 1 Activities CHEMISTRY

James Chickos Room B435. Introductory Chemistry 1111

Measurements and Calculations. Chapter 2

1 - Astronomical Tools

Chapter 1B. Measurement CHAPTER OUTLINE

Measurement. Chemistry Chapter 2 Scientific Notations, Measurement, Metric System

Chapter 3 Metric Units and Conversions

Today is Thursday, February 11 th, 2016

In chemistry we use metric units (called SI units after the French term for Systeme internationale.

Bio 105 Lab 1: Metric System, Dimensional Analysis, and Measuring

PHYSICS. Chapter 1 Review. Rounding Scientific Notation Factor Label Conversions

Measurement. Scientific Notation. Measurements and Problem Solving. Writing Numbers in Scientific Notation

CHEM 1105 January 10, 2014

Lab #2: Measurement and Metrics Lab

In Class Activity. Chem 107 Cypress College

WELCOME TO 1103 PERIOD 1

Dimensional Analysis

Handout Unit Conversions (Dimensional Analysis)

links: the world's smallest billboard at What is chemistry? A working definition

CHAPTER 1: Measurement, Units & Conversion

Measuring Time, Space, and Matter. Units of Measurement

Lecture Presentation. Chapter 1. Introduction: Matter and Measurement. James F. Kirby Quinnipiac University Hamden, CT

Serway AP Physics. Chapter 1

Notes Chapter 2: Measurements and Calculations. It is used to easily and simply write very large numbers, and very small numbers.

Measurements. October 06, 2014

What are these standards? Who decides what they are? How many Standards should we have?

Transcription:

Objectives 1. To show how very large or very small numbers can be expressed in scientific notation 2. To learn the English, metric, and SI systems of measurement 3. To use the metric system to measure length, volume and mass

Arithmetic is being able to count up to twenty without taking your shoes off Mickey Mouse Mickey also says Do you remember what an exponent is?

A. Scientific Notation size large size size slider small Very large or very small numbers can be expressed using scientific notation The number is written as a number between 1 and 10 multiplied by 10 raised to a power. e.g. 7200 is 7.2 x 10 3 The power of 10 depends on: The number of places the decimal point is moved. The direction the decimal point is moved. Left Positive exponent Right Negative exponent

A. Scientific Notation Representing Large Numbers 93,000,000 miles from the Earth to the Sun (sunlight takes 8 minutes to reach us) 93,000,000 = 9.3 x 10,000,000 = 9.3 x 10 x 10 x 10 x 10 x 10 x 10 x 10 = 9.3 x 10 7 (Decimal point moved 7 digits to the left) Number between 1 and 10 Appropriate power of ten

A. Scientific Notation Representing Small Numbers 0.000167 To obtain a number between 1 and 10 we must move the decimal point to the right. 0.000167 = 1.67 10-4 10-4 = 1/10000 (one ten-thousandth)

Convert the following numbers between normal and scientific notation: 329 700,000 20090 0.000034 0.01023 123.4 45.607 1.7 x 10 3 2.4503 x 10 5 7.9 x 10 11 2.8 x 10-3 7.45 x 10-1 2.3 x 10-7

Convert the following numbers/sums into correct scientific notation: 35.9 x 10 3 556.67 x 10 4 22.7 x 10-3 0.0348 x 10-1 1845 x 10 5 123.4 x 10 23 0.00345 x 10 7

Scientific Notation Math - Exponents 10 3 10-5 10 0 10 3 x 10 8 10-3 x 10 7 10-5 x 10-3 10 5 / 10 2 10-7 / 10 5 10-2 / 10-4 1/10 3 1/10 5 1/10-2 1/10-7

Scientific Notation Math Multiplication - multiply the numbers, add the indices 1.2 x 10 4 multiplied by 5 x 10 6 = Division - divide the numbers, subtract the indices 5.5 x 10 8 divided by 1.1 x 10 2 = (For all operations reconvert answers to full scientific notation)

Scientific Notation Math Addition or subtraction: Convert to the same base and perform the operation Then reconvert to scientific notation 1.04 x 10 3 plus 6.8 x 10 2 =

Combined Operations Give the answer in scientific notation 7.5 x 10 5 3 x 10 3 2 x 10 6 x 1.5 x 10 2 5 x 10 3 6.5 x 10 5 x 4 x 10 4 2 x 10-3 7.5 x 10-5 3 x 10 3 x 5 x 10-6

Measurement A quantitative observation Consists of 2 parts Number Unit tells the scale being used

B. Units Units provide a scale on which to represent the results of a measurement. What units can you think of? Time is God s way of making sure everything doesn t happen at once (Unknown)

B. Units There are 3 commonly used unit systems. English (used in the United States) Metric (broadly used across the World) SI (most formal version of Metric used in science)

Countries not yet officially metric: USA, Liberia, Myanmar

Metric/SI Prefixes size slider Prefixes are used to denote different sizes of each unit:

(10-12 ) pico p (10-15 ) femto f (10-18 ) atto a (10-21 ) zepto z (10-24 ) yocto y Multiplication factor (scientific notation) Section 5.1 Prefix (10 24 ) yotta Y (10 21) zetta Z (10 Full List of Metric Prefixes ) exa E (10 15 ) peta P (10 12 ) tera T 1 000 000 000 (10 9 ) giga G 1 000 000 (10 6 ) mega M 1000 (10 3 ) kilo k 100 (10 2 ) hecto h 10 (10 1 ) deka da 0.1 (10-1 ) deci d 0.01 (10-2 ) centi c 0.001 (10-3 ) milli m 0.000 001 (10-6) micro µ 0.000 000 001 (10-9 ) nano n Symbol

Metric Dollars 100 dollars 1 hectodollar 1x10 2 10 dollars 1 dekadollar 1x10 1 1 dollar 1 dollar 1x10 0 1 dime 1 decidollar 1X10-1 1 cent 1 centidollar 1X10-2

C. Measurements of Length, Volume and Mass Length Fundamental unit is the meter 1 meter = 39.37 inches Comparing English and metric systems Who is taller a woman 5 ft 6 inches or a man 1.62 meters tall?

C. Measurements of Length, Volume and Mass * *

C. Measurements of Length, Volume and Mass Volume Amount of 3-D space occupied by a substance Fundamental unit is meter 3 (m 3 ) 1 liter = 2.11 Pints 250mL of milk is close to ½ Pint, 1 Pint, 1 Quart, 1 Gallon?

C. Measurements of Length, Volume and Mass Mass Quantity of matter in an object Fundamental unit is kilogram = 2.2 lbs

C. Measurements of Length, Volume and Mass How many quarters in a row to make a meter? What is the weight in kg of a man who weighs 180 lbs? How many liters in a six-pack of soda cans?

A man with a watch knows what time it is. A man with two watches is never sure (Unknown)

I weigh some sugar on my kitchen scales and some more sugar on my lab balance. The results are shown below. How much sugar should I say I have, in total, without being misleading? Kitchen scales: 2.2 kilograms Lab scale: 101.237grams (1kg = 1000g)

Objectives 1. To learn how uncertainty in a measurement arises 2. To learn to indicate a measurement s uncertainty by using significant figures 3. To learn to determine the number of significant figures in a calculated result

A. Uncertainty in Measurement A measurement always has some degree of uncertainty.

A. Uncertainty in Measurement Different people estimate differently. Record all certain numbers and one estimated number.

B. Significant Figures Significant figures are the meaningful figures in our measurements and they allow us to generate meaningful conclusions Numbers recorded in a measurement are significant. All the certain numbers plus first estimated number e.g. 2.85 cm We need to be able to combine data and still produce meaningful information There are rules about combining data that depend on how many significant figures we start with

B. Significant Figures Rules for Counting Significant Figures 1. Nonzero integers always count as significant figures. 1457 has 4 significant figures 23.3 has 3 significant figures

B. Significant Figures Rules for Counting Significant Figures 2. Zeros a. Leading zeros - never count 0.0025 2 significant figures b. Captive zeros - always count 1.008 4 significant figures c. Trailing zeros - count only if the number is written with a decimal point 100 1 significant figure 100. 3 significant figures 120.0 4 significant figures

B. Significant Figures Rules for Counting Significant Figures 3. Exact numbers - unlimited significant figures Not obtained by measurement Determined by counting: 3 apples Determined by definition: 1 in. = 2.54 cm

How Many Significant Figures? 1422 65,321 1.004 x 10 5 200 435.662 50.041 102 102.0 1.02 0.00102 0.10200 1.02 x 10 4 1.020 x 10 4 60 minutes in an hour 500 laps in the race

B. Significant Figures - Round off 52.394 to 1,2,3,4 significant figures

B. Significant Figures Rules for Multiplication and Division I measure the sides of a rectangle, using a ruler to the nearest 0.1cm, as 4.5cm and 9.3cm What does a calculator tell me the area is? What is the range of areas that my measurements might indicate (consider the range of lengths that my original measurements might cover)?

B. Significant Figures Rules for Multiplication and Division The number of significant figures in the result is the same as in the measurement with the smallest number of significant figures.

B. Significant Figures Rules for Addition and Subtraction The number of significant figures in the result is the same as in the measurement with the smallest number of decimal places.

Rules for Combined Units Multiplication / Division When you Multiply or Divide measurements you must carry out the same operation with the units as you do with the numbers 50 cm x 150 cm = 7500 cm 2 20 m / 5 s = 4 m/s or 4 ms -1 16m / 4m = 4 Addition / Subtraction When you Add or Subtract measurements they must be in the same units and the units remain the same 50 cm + 150 cm = 200 cm 20 m/s 15 m/s = 5 m/s

Calculate the following. Give your answer to the correct number of significant figures and use the correct units 11.7 km x 15.02 km = 12 mm x 34 mm x 9.445 mm = 14.05 m / 7 s = 108 kg / 550 m 3 = 23.2 L + 14 L = 55.3 s + 11.799 s = 16.37 cm 4.2 cm = 350.55 km 234.348 km =

Objectives 1. To learn how dimensional analysis can be used to solve problems 2. To learn the three temperature scales 3. To learn to convert from one temperature scale to another 4. To practice using problem solving techniques 5. To define density and its units

Conversions 45.7 cm is how many meters? 11.3 kg is how many milligrams? What is tricky about this kind of calculation?

I am driving in Canada. I have a journey of 120 km and I need to estimate how many liters of gas to buy. I know my car fuel mileage is 24 miles per gallon. (1 mile is 1.6 km, 1 gallon is 3.79 liters)

A. Tools for Problem Solving Converting Units of Measurement We can convert from one system of units to another by a method called dimensional analysis using conversion factors Unit 1 conversion factor = Unit 2 Conversion Factor has Unit 2 /Unit 1

A. Tools for Problem Solving Converting Units of Measurement Conversion factors are built from an equivalence statement which shows the relationship between the units in different systems. 1 inch = 2.54cm Conversion factors are ratios of the two parts of the equivalence statement that relate the two units. 1 inch or 2.54cm 2.54cm 1 inch

A. Tools for Problem Solving Converting Units of Measure 2.85 cm =? in. 2.85 cm conversion factor =? in. Equivalence statement 2.54 cm = 1 in. Possible conversion factors Does this answer make sense? (P166 Q39 c-h,)

Multiple Steps 2.85 cm is how many feet? 7.1 years is how many hours? Let s go back and solve the Canadian Driving Problem

A. Tools for Problem Solving Tools for Converting from One Unit to Another Step 1 Find an equivalence statement that relates the 2 units. Step 2 Choose the conversion factor by looking at the direction of the required change (cancel the unwanted units). Step 3 Multiply the original quantity by the conversion factor. Step 4 Make sure you have the correct number of significant figures.

I am driving in Canada. I have a journey of 120 km and I need to estimate how many liters of gas to buy. I know my car fuel mileage is 24 miles per gallon. (1 mile is 1.6 km, 1 gallon is 3.79 liters) Ask yourself these questions Where are we starting from? Where do we want to go? What information do we know that helps us? How do we get to a solution? Does your answer make sense?

I am driving in Canada. I have a journey of 120 km and I need to estimate how many liters of gas to buy. I know my car fuel mileage is 24 miles per gallon. (1 mile is 1.6 km, 1 gallon is 3.79 liters)

32 Degrees?

..or 32 Degrees?

.................. 32 Degrees?..

B. Temperature Conversions There are three commonly used temperature scales, Fahrenheit, Celsius and Kelvin.

B. Temperature Conversions Converting Between the Kelvin and Celsius Scales Note that The temperature unit is the same size. The zero points are different. To convert from Celsius to Kelvin we need to adjust for the difference in zero points.

B. Temperature Conversions Converting Between the Kelvin and Celsius Scales 70 o C =? K T C + 273 = T K 70 + 273 = 343 K

B. Temperature Conversions Converting Between the Fahrenheit and Celsius Scales Note The different size units The different zero points To convert between Fahrenheit and Celsius we need to make 2 adjustments. T oc =?

Convert These Temperatures 200 o C to K -52 o C to K 345K to o C 11K to o C 212 o F to o C 32 o F to o C 525 o F to o C 25 o C to o F -20 o C to o F 200 o F to K

At what temperature would a Celsius and a Fahrenheit thermometer read the same? T o F = To C

C. Density Density is the amount of matter present in a given volume of substance. Write down all the statements relating the three properties D, M and V

How to Remember the Density Relationships Q. Where do you get your permit? A. At the DMV m D v

Calculate the Missing Quantity: Mass Volume Density 4530 g 225 cm 3? g/cm 3 26.3g 25.0 ml? g/cm 3 1.00 lb 500. cm 3? g/cm 3 0.352 g 0.000271 L? g/cm 3? g 45 cm 3 2.45 g/cm 3 1000. g? ml 10.5 g/cm 3? g 10. L 0.0023 g/ml 1.45 kg? L 2.67 g/ml Remember the DMV 1 lb = 454 g

C. Density H 2 = 0.084 kg/m3 Is the hydrogen number correct?

Density of Water One gram of water has a volume of 1 milliliter The density of water is? D = M/V Density of water = 1 g/ml or 1g/cm3 How much does 150 ml of water weigh? What is the density of water in kg/m3? (Egg density demo)