Synchronous motors Siemens FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height Red Stic torque Red Red FK7 Compact torque ) synchronous motor Nural cooling Number of pole pairs Rotor moment of inertia (out brake) Weight (out brake) n red S P red T= K rpm kw (P) M T= K M red T= K I red T= K Order No. - kgm ( - lb f -in-s ) m kg (lb). (.7) 7 (.). (.).6 FK7-C7-7 7 7 7. (7.7) (6.). (7.) 6 (6. (.). FK7-C7-7 7 7 (.) (6.) 7.7 (.) (.) 7 (7.) 6 FK7-C7-7 7 7 6 () (6.). (.). (.).6 (.). FK7-F7-7 7 7. (.6. (.) 6. (.). (.) 6. (.) (.).7 (.) 7. (.).7.6 FK76-F7-7 7 7 FK76-F7-7 7 7 7. (7.). (.) 7. (.). (.). (.). (.). (.) 6 (.) 6. (.). (7.7). 7. FK7-F7-7 7 7 FK7-F7-7 7 7. (.) 7. (.) (.) (.).77 (.).7 (6.).7 (7.) ).7 (.) (.) 7 (.) 6 (6. (.). (.). (.). (.) ) 6. (.).. 6. ) FK7-F7-7 7 7 FK7-F7-7 7 7 FK7-F7-7 7 7 FK7-F7-7 7 7. (.) 7. (7.7) (.) 6 () (.) (6.) (6.) (6.) 6.7 (.). (.) ) 6. (.) (.).7 (.7). (.7) ). 6. ) FK76-7-7 7 7 FK76-7-7 7 7 7. (7.). (.) 7. (.). (.). (.) ). (.) ). (.) 6 (.).7 (.) ). (6.) ).6 ) ) FK7-7-7 7 7 FK7-7-7 7 7. (.) 7. (.) (.) (.) 6. (.). (.). (.). (.). (.).6 (.).. FK7-K7-7 7 FK7-K7-7 7.6 (.. (.). (.). (.). (.. (..6 (.). FK7-K7-7 7 7. (.). (.) 6. (.7).6 (.). (.).6 (.). (.. (.7).. FK7-K7-7 7 7 FK7-K7-7 7 7.6 (.). (.).7 (6.).7 (.).6 (.). (.) ).6 (.). (.). (.). (.) ).7. ) FK7-K7-7 7 7 FK7-K7-7 7 7.6 (.). (.6. (7.7). (.) out RIVE-CLiQ interface: Incremental encoder sin/cos V pp S/R bsolute encoder En S/R ) (not for FK7 to FK7) bsolute encoder En S/R ) (only for FK7 to FK7) bsolute encoder En S/R ) (not for FK7 to FK7) bsolute encoder En 6 S/R ) (only for FK7 to FK7) Multi-pole resolver -pole resolver E S T RIVE-CLiQ interface ) : bit incremental encoder (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (not for FK7 to FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7/FK7) 6 bit absolute encoder, single-turn + bit multi-turn ) (not for FK7 to FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7/FK7) bit resolver (not for FK7) bit resolver (not for FK7) F L K V U P Shaft extension: Shaft and flange accuracy: olding brake: out out B egree of protection: IP6 (not for FK7) IP6 and E flange IP67 (not for FK7) IP6 (IP for FK7) and anthracite paint finish IP6 and E flange IP67, anthracite paint finish (not for FK7) IP6 and E flange IP67, anthracite paint finish and metal ring ple on motor (not for FK7) To select the degree of protection and type of construction, see selection guides.
Siemens Synchronous motors FK7 Compact motors Nural cooling Selection and ordering da Motor type (continued) Stic Calculed P calc ) I P calc M for M T= K T= K SINMICS S Motor Module Red Booksize form output ) I red Power cable complete shield Motor connection (and brake connection) via connector Power connector Cable crosssection 7) kw (P) Order No. Size mm Order No. Pre-assembled cable FK7-C7.....7 (7. 6SL7-7TE-. x. 6FX7-7S-... FK7-C7....7 7. (.) 6SL7-7TE-. x. 6FX7-7S-... FK7-C7... (.) 6SL7-7TE-. x. 6FX7-7S-... FK7-F7..... (.) 6SL7-7TE- x. 6FX7-7S-... FK76-F7... FK76-F7..... (.. (.7) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-F7... FK7-F7...... (.). (6.7) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-F7... FK7-F7... FK7-F7... FK7-F7.... 7..7 (7.. (.). (.) (.) 6SL7-7TE- 6SL7-7TE- 6SL7 - TE- 6SL7 - TE-... x. x. x x 6FX7-7S-... 6FX7-7S-... 6FX7-7S-... 6FX7-7S6-... FK76-7... FK76-7... 6.. (.). (7.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-7... FK7-7... 7.. (.) 7. (.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-K7... FK7-K7...... (.). (.) 6SL7-7TE- 6SL7-7TE-.. x. x. 6FX--... 6FX--... FK7-K7..... (.7) 6SL7-7TE- x. 6FX7-7S-... FK7-K7... FK7-K7....7..7 (.). (.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-K7... FK7-K7...... (.). (. 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... Cooling: Internal air cooling External air cooling Motor Module: Single Motor Module ouble Motor Module Type of cable: MOTION-CONNECT MOTION-CONNECT Without brake cores With brake cores C For length code as well as and signal cables, see Connection system MOTION-CONNECT.... ) If the absolute encoder is used, M red is reduced by %. ) These values refer to n = rpm. ) These values refer to n = rpm. ) These values refer to n = rpm. ) These values refer to n = rpm. With the specified Motor Module, the motor cannot be fully utilized M T = K winding temperure rise. If a Motor Module a higher ring is used, you must check whether the specified cable can be connected to it. 7) The carrying capacity of the cables complies EN 6- for installion type C, for continuous duty an ambient air temperure of C ( F). ) Motors shaft height are not available a RIVE-CLiQ interface. The encoder systems are connected via the SMC (Sensor Module Cabinet-Mounted). ) With default setting of the pulse frequency. ) Pcalc [kw] = M [] x n red P calc [P] = M [Ib f -in] x n red 6
Synchronous motors Siemens FK7 igh ynamic motors Nural cooling Selection and ordering da Red speed Shaft height Red Stic torque Red torque ) Red FK7 igh ynamic synchronous motor Nural cooling Number of pole pairs Rotor moment of inertia (out brake) Weight (out brake) n red S P red T= K rpm kw (P) M T= K M red T= K I red T= K Order No. - kgm ( - lb f -in-s ) m kg (lb). (.). (.). (. FK7-7F7-7 7 7. (.) 7.7 (7) 6.7 (.). (.7) 6. (.7) (.). (.). (.). 7. FK76-7F7-7 7 7 FK76-7F7-7 7 7. (.) 6. (.7) (.). (.). (.) ).77 (. ) (6.) (. (.) ) (.) ). ). ) FK7-7F7-7 7 7 FK76-7F7-7 7 7 (.) (.). (.). (.). (.. (.). (.). (.).6 (.). (.). FK7-77-7 7 7 FK7-77-7 7 7. (.). (.) 6. (.) 7.7 (7) 6. (.7).6 (. 6. (.7) (.). (.). (.7). 7 FK76-77-7 7 7 FK76-77-7 7 7. (.) 6. (.7) (.). (.) 6 6.7 (.7. (.). (.7). FK7-7K7-7 7 7.7 (.). (6.).6 (.. (.). (.). FK7-7K7-7 7 7. (.) 6. (.) out RIVE-CLiQ interface: Incremental encoder sin/cos V pp S/R bsolute encoder En S/R ) (not for FK7) bsolute encoder En S/R ) (only for FK7) bsolute encoder En S/R ) (not for FK7) bsolute encoder En 6 S/R ) (only for FK7) Multi-pole resolver -pole resolver E S T RIVE-CLiQ interface: bit incremental encoder bit absolute encoder, single-turn + bit multi-turn ) (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) 6 bit absolute encoder, single-turn + bit multi-turn ) (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) bit resolver bit resolver F L K V U P Shaft extension: Shaft and flange accuracy: olding brake: out out B egree of protection: IP6 IP6 and E flange IP67 IP6 and anthracite paint finish IP6 and E flange IP67, anthracite paint finish IP6 and E flange IP67, anthracite paint finish and metal ring ple on motor To select the degree of protection and type of construction, see selection guides.
Siemens Synchronous motors FK7 igh ynamic motors Nural cooling Selection and ordering da Motor type (continued) Stic Calculed P calc SINMICS S Motor Module Red Booksize form output ) Power cable complete shield Motor connection (and brake connection) via connector I P calc M for M T= K T= K I red Power connector Cable crosssection ) Pre-assembled cable kw (P) Order No. Size mm Order No. FK7-7F7..... (.7) 6SL7-7TE- x. 6FX7-7S-... FK76-7F7... FK76-7F7... 6.. (.7). (.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-7F7... FK76-7F7.... 6. (.). (.) 6SL7 - TE- 6SL7 - TE-.. x x 6FX7-7S-... 6FX7-7S-... FK7-77... FK7-77.... 6.. (.). (. 6SL7-7TE- 6SL7-7 TE- x. x. 6FX7-7S-... 6FX7-7S-... FK76-77... FK76-77.... (.).7 (7. 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-7K7..... (.) 6SL7-7TE- x. 6FX7-7S-... FK7-7K7... 6.. (. 6SL7-7TE- x. 6FX7-7S-... Cooling: Internal air cooling External air cooling Motor Module: Single Motor Module ouble Motor Module Type of cable: MOTION-CONNECT MOTION-CONNECT Without brake cores With brake cores C For length code as well as and signal cables, see Connection system MOTION-CONNECT.... ) If the absolute encoder is used, M red is reduced by %. ) These values refer to n = rpm. ) These values refer to n = rpm. ) The carrying capacity of the cables complies EN 6- for installion type C, for continuous duty an ambient. ) With default setting of the pulse frequency. P calc [kw] = M [] x n red P calc [P] = M [Ib f -in] x n red 6
Synchronous motors Siemens FK7 Compact/FK7 igh ynamic motors Nural cooling for Power Modules Selection and ordering da Red speed Shaft height Red Stic torque Red torque Red FK7 Compact/igh ynamic synchronous motor Nural cooling Connection to SINMICS V C Number of pole pairs Rotor moment of inertia (out brake) Weight (out brake) n red S P red T= K M T= K M red T= K I red T= K m rpm kw (P) Order No. - kgm ( - lb f -in-s ) kg (lb) 6. (.). (.).6 (.6). (.). (.).6 (.). (.7). (.). (.).6.. FK7-F-7 7 7 FK7-7F-7 7 7 FK7-F-7 7 7.6 (.).7 (.). (.).7 (.). (6.).7 (.). (.).7 (.. (.).7 (.).6 (.). (.).. FK7-F-7 7 7 FK7-7F-7 7 7. (.6. (.). (.) 6. (.) 6. (.). (.). (.). (.). (.).6 (.).. FK7-K-7 7 FK7-K-7 7.6 (.. (.). (.). (.). (.). (..6 (.). FK7-K-7 7 7. (.). (.) Synchronous motor: FK7 Compact FK7 igh ynamic 7 out RIVE-CLiQ interface: Incremental encoder sin/cos V pp S/R bsolute encoder En S/R ) (only for FK7) bsolute encoder En S/R ) (not for FK7) bsolute encoder En S/R ) (only for FK7) bsolute encoder En 6 S/R ) (not for FK7) Multi-pole resolver -pole resolver E S T RIVE-CLiQ interface: ) bit incremental encoder (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7/FK7) 6 bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) bit single-turn absolute encoder + bit multi-turn ) (only for FK7/FK7) bit resolver (not for FK7) bit resolver (not for FK7) F L K V U P Shaft extension: Shaft and flange accuracy: olding brake: out out B egree of protection: IP6 (not for FK7) IP6 and E flange IP67 (not for FK7) IP6 (IP for FK7) and anthracite paint finish IP6 and E flange IP67, anthracite paint finish (not for FK7) IP6 and E flange IP67, anthracite paint finish and metal ring ple on motor (not for FK7) To select the degree of protection and type of construction, see selection guides.
Siemens Synchronous motors FK7 Compact/igh ynamic motors Nural cooling for Power Modules Selection and ordering da Motor type (continued) Stic Calculed P calc SINMICS S Power Module Red output ) Booksize form out line filter Power cable complete shield Motor connection (and brake connection) via connector I P calc M for M T= K T= K I red M T= K Power connector Cable crosssection ) Pre-assembled cable kw (P) Order No. Size mm Order No. FK7-F... FK7-7F... FK7-F....7...6 (.). (.. (.7)... 6SL - SB-U 6SL - SB-U 6SL - SB-U x. x. x. 6FX7-7-... 6FX7-7-... 6FX7-7-... FK7-F... FK7-7F...... (.). (.).. 6SL - SB-U 6SL - SB-U x. x. 6FX7-7-... 6FX7-7-... FK7-K... FK7-K...... (.). (.).. 6SL - SB-U 6SL - SB-U.. x. x. 6FX--... ) 6FX--... ) FK7-K..... (.7). 6SL - SB-U x. 6FX7-7-... Cooling: Internal air cooling Motor Module: Single Motor Module Type of cable: MOTION-CONNECT MOTION-CONNECT Without brake cores With brake cores C For length code as well as and signal cables, see Connection system MOTION-CONNECT.... ) If the absolute encoder is used, M red is reduced by %. ) This cable is fitted a connector M7 thread the motor end and brake cores as standard ( x. mm + x. mm ). ) The carrying capacity of the cables complies EN 6- for installion type C, for continuous duty an ambient air temperure of C ( F). ) Motors of shaft height are not available a RIVE-CLiQ interface. The encoder systems are connected via the SMC (Sensor Module Cabinet-Mounted). ) With default setting of the pulse frequency. P calc [kw] = M [] x n red P calc [P] = M [Ib f -in] x n red 6